BIANCA-BRICK-X25PAD-MIB Table View

This Table contains entries for the pad profiles. For PPP 
connections, pad profiles are assigned to incoming connections
via the isdnDispatchTable. For outgoing connections, the
profile is assigned by the biboPppTable. Profile 0 is used as
default profile for ppp.

x25PadProfileEntry row .1.3.6.1.4.1.272.4.6.8.1

Entries can only be created and deleted manually.

Indexes

x25PadProNumber

Column	Syntax	OID
x25PadProNumbermandatory The unique number of the profile.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.272.4.6.8.1.1
x25PadProStatemandatory The State of the profile.	Enumerationr/w Enumerated Values: 1 valid 2 delete	.1.3.6.1.4.1.272.4.6.8.1.2
x25PadProAutoCallDstAddrmandatory When this object is set to a non-empty string, a call will automatically be established to this PAD address.	r/w	.1.3.6.1.4.1.272.4.6.8.1.3
x25PadProEscapemandatory The value of the parameter one. This parameter defines a character on its receipt the PAD alternates the state from data-transfer in connection-in-progress. This allows the start-stop mode DTE to initiate an escape from…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.4
x25PadProEchomandatory The value of the parameter two. This parameter determines whether the echo mode is off or on. The selection of the characters to be echoed is dependent on the value of parameter EchoMask.	Enumerationr/w Enumerated Values: 1 echo 256 no-echo	.1.3.6.1.4.1.272.4.6.8.1.5
x25PadProForwardCharmandatory The value of the parameter three. This parameter defines a character. On its receipt the PAD forwards the previously received data from start-stop DTE as packet. The value 0 means no data forwarding character.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.6
x25PadProIdleTimermandatory The value of parameter four. This parameter allows the selection of the duration of an interval between successive characters received from the start-stop DTE which, when exceeded, will cause the PAD to terminate the as…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.7
x25PadProDevControlmandatory The value of the parameter five. This parameter allows for flow control between the PAD and the start-stop DTE. The PAD indicates whether it is ready or not to accept characters from the start-stop DTE by transmitting s…	Enumerationr/w Enumerated Values: 1 use-only-data-transfer 2 use 256 no-use	.1.3.6.1.4.1.272.4.6.8.1.8
x25PadProSigControlmandatory The value of the parameter six. This parameter provides the start-stop DTE with the ability to decide whether or not and in what format PAD service signals are transmitted. The value 0 means no service signals are trans…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.272.4.6.8.1.9
x25PadProBrkControlmandatory The value of the parameter seven. This parameter allows the selection of the operation of the PAD after the receipt of a BREAK-signal from the start-stop DTE in data-transfer state. The value 0 indicates no operation. V…	Integer32r/w Constraints: range: 0-21	.1.3.6.1.4.1.272.4.6.8.1.10
x25PadProDiscardmandatory The value of the parameter eight. This parameter provides for a PAD to discard the content of user sequences in packets upon request rather than disassembling and transmitting these to the start-stop DTE.	Enumerationr/w Enumerated Values: 1 discard-output 256 normal-data-delivery	.1.3.6.1.4.1.272.4.6.8.1.11
x25PadProCRPaddingmandatory The value of the parameter nine. This parameter provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to the start-stop DTE after the occurrence of a carriage return c…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.12
x25PadProLineFoldmandatory The value of the parameter ten. This parameter provides for the automatic insertion by the PAD of appropriate format effectors in the character stream transmitted to the start-stop DTE. The predetermined maximum number …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.13
x25PadProFlowControlmandatory The value of the parameter twelve. It allows for flow control between the start-stop DTE and the PAD. The start-stop DTE indicates whether it is ready or not to accept characters from the PAD by transmitting special cha…	Enumerationr/w Enumerated Values: 1 use-DC1-DC3 256 no-use-DC1-DC3	.1.3.6.1.4.1.272.4.6.8.1.14
x25PadProLFInsertmandatory The value of the parameter thirteen. It provides for the automatic insertion by the PAD of a linefeed character in the character stream to or from the start-stop DTE after each carriage return character. It applies only…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.272.4.6.8.1.15
x25PadProLFPaddingmandatory The value of the parameter fourteen. It provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to the start-stop DTE after the occurrence of a linefeed character. It ap…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.16
x25PadProEditmandatory The value of the parameter fifteen. It determines, whether editing of user data in data-transfer state is possible or not. The value 1 suspends data forwarding on full packet until the editing buffer is full and data fo…	Enumerationr/w Enumerated Values: 1 editing-user-data 256 no-editing-user-data	.1.3.6.1.4.1.272.4.6.8.1.17
x25PadProCharDelmandatory The value of the parameter sixteen. This parameter provides for character delete editing capabilities in the data-transfer state for the start-stop DTE. The character defined by the user for character delete is the bina…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.18
x25PadProLineDelmandatory The value of the parameter seventeen. This parameter provides for line delete editing capabilities in the data-transfer state for the start-stop DTE. The character defined by the user for line delete is the binary respr…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.19
x25PadProLineDispmandatory The value of the parameter eighteen. This parameter provides for line display editing capabilities in the data-transfer state for the start-stop DTE. The character defined by the user for line display is the binary resp…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.20
x25PadProSigEditmandatory The value of the parameter nineteen. It provides the start- stop DTE with the ability to decide whether or not editing PAD service signals are transmitted and which format should be used. This parameter does not apply i…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.21
x25PadProEchoMaskmandatory The value of the parameter twenty. When ECHO is enabled, it allows selected defined sets of characters received from the start-stop DTE not to be transmitted back to the start-stop DTE. Value 64 does not apply if editin…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.22
x25PadProParitymandatory The value of the parameter twenty one. It allows the PAD to check parity in the data stream from the start-stop DTE and/or generate parity in the data stream to the start-stop DTE. Characters generated by the PAD itself…	Enumerationr/w Enumerated Values: 1 parity-checking 2 parity-generation 3 parity-checking-generation 256 no-parity	.1.3.6.1.4.1.272.4.6.8.1.23
x25PadProPageWaitmandatory The value of the parameter twenty two. It allows the PAD to suspend transmission of additional characters to the start- stop DTE after specified number of linefeed characters have been transmitted by the PAD. Value 0 de…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.24
x25PadProXCharDelmandatory The value of parameter one hundered eighteen. This parameter is a repeating of parameter sixteen.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.25
x25PadProXLineDelmandatory The value of parameter one hundered nineteen. This parameter is a repeating of parameter seventeen.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.26
x25PadProXLineDispmandatory The value of the parameter one hundered twenty. This parameter is a repeating of parameter eighteen.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.27
x25PadProXForwardChar1mandatory The value of the parameter one hundered twenty one. This parameter allows predefinition of one data forwarding character in addition to parameter three.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.28
x25PadProXForwardChar2mandatory The value of the parameter one hundered twenty two. This parameter allows predefinition of one data forwarding character in addition to parameter three.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.29
x25PadProXParitymandatory The value of the parameter one hundered twenty three. This corresponds to the parameter twenty one, but the meaning of values 1 and 3 are interchanged.	Enumerationr/w Enumerated Values: 1 parity-checking-generation 2 parity-generation 3 parity-checking 256 no-parity	.1.3.6.1.4.1.272.4.6.8.1.30
x25PadProXDelaymandatory The value of the parameter one hundered twenty five. This parameter determines how long data forwarding ist delayed, wenn it synces with a data entry.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.272.4.6.8.1.31
x25PadProXLFInsertmandatory The value of the parameter one hundered twenty six. This is a repeating of parameter thirteen.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.272.4.6.8.1.32
x25PadProIdentmandatory PAD Identification String, that is sent to start-stop DTE, when PAD is started.	r/w	.1.3.6.1.4.1.272.4.6.8.1.33
x25PadProTermAfterCallmandatory Terminate the PAD after X25 Call cleared	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.272.4.6.8.1.34
x25PadProIgnoreX29mandatory Ignore all X.29 messages	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.272.4.6.8.1.35