filterPktData

RMON-MIB · .1.3.6.1.2.1.16.7.1.1.4

Object

column r/w OctetString

The data that is to be matched with the input packet.
For each packet received, this filter and the accompanying
filterPktDataMask and filterPktDataNotMask will be
adjusted for the offset.  The only bits relevant to this
match algorithm are those that have the corresponding
filterPktDataMask bit equal to one.  The following three
rules are then applied to every packet:
              
(1) If the packet is too short and does not have data
    corresponding to part of the filterPktData, the packet
    will fail this data match.
              
(2) For each relevant bit from the packet with the
    corresponding filterPktDataNotMask bit set to zero, if
    the bit from the packet is not equal to the corresponding
    bit from the filterPktData, then the packet will fail
    this data match.
              
(3) If for every relevant bit from the packet with the
    corresponding filterPktDataNotMask bit set to one, the
    bit from the packet is equal to the corresponding bit
    from the filterPktData, then the packet will fail this
    data match.
              
Any packets that have not failed any of the three matches
above have passed this data match.  In particular, a zero
length filter will match any packet.
              
This object may not be modified if the associated
filterStatus object is equal to valid(1).

Context

MIB: RMON-MIB
OID: .1.3.6.1.2.1.16.7.1.1.4
Type: column
Access: readwrite
Status: current
Parent: filterEntry
Table: filterTable
Siblings: 10

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
filterIndex An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.	column	Integer32	`.1.3.6.1.2.1.16.7.1.1.1`
filterOwner The entity that configured this entry and is therefore using the resources assigned to it.	column	OwnerString	`.1.3.6.1.2.1.16.7.1.1.10`
filterStatus The status of this filter entry.	column	EntryStatus	`.1.3.6.1.2.1.16.7.1.1.11`
filterChannelIndex This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified …	column	Integer32	`.1.3.6.1.2.1.16.7.1.1.2`
filterPktDataOffset The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing…	column	Octets SNMPv2-SMIInteger32	`.1.3.6.1.2.1.16.7.1.1.3`
filterPktDataMask The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are releva…	column	OctetString	`.1.3.6.1.2.1.16.7.1.1.5`
filterPktDataNotMask The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in t…	column	OctetString	`.1.3.6.1.2.1.16.7.1.1.6`
filterPktStatus The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. …	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.16.7.1.1.7`
filterPktStatusMask The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the st…	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.16.7.1.1.8`
filterPktStatusNotMask The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal t…	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.16.7.1.1.9`