IMA-MIB Table View

Column Syntax OID

IF-MIBInterfaceIndexOrZero

A unique value for the IMA Group.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.353.5.7.1.1.2.1.1

imaGroupRowStatus

The imaGroupRowStatus object allows create, change, and delete

operations on imaGroupTable entries.

To create a new conceptual row (or instance) of the imaGrou…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.353.5.7.1.1.2.1.2

imaGroupIfIndex

This object identifies the logical interface number ('ifIndex')

assigned to this IMA group, and is used to identify corresponding

rows in the Interfaces MIB.

…

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.353.5.7.1.1.2.1.3

imaGroupNeState

The current operational state of the near-end IMA Group State

Machine.

ImaGroupState

Type Values:

1	notConfigured
2	startUp
3	startUpAck
4	configAbortUnsupportedM
5	configAbortIncompatibleSymmetry
6	configAbortOther
7	insufficientLinks
8	blocked
9	operational
10	configAbortUnsupportedImaVersion

.1.3.6.1.4.1.353.5.7.1.1.2.1.4

imaGroupFeState

The current operational state of the far-end IMA Group State

Machine.

ImaGroupState

Type Values:

1	notConfigured
2	startUp
3	startUpAck
4	configAbortUnsupportedM
5	configAbortIncompatibleSymmetry
6	configAbortOther
7	insufficientLinks
8	blocked
9	operational
10	configAbortUnsupportedImaVersion

.1.3.6.1.4.1.353.5.7.1.1.2.1.5

imaGroupFailureStatus

The current failure status of the IMA group (the reason why

the GTSM is in the down state).

ImaGroupFailureStatus

Type Values:

1	noFailure
2	startUpNe
3	startUpFe
4	invalidMValueNe
5	invalidMValueFe
6	failedAssymetricNe
7	failedAssymetricFe
8	insufficientLinksNe
9	insufficientLinksFe
10	blockedNe
11	blockedFe
12	otherFailure
13	invalidImaVersionNe
14	invalidImaVersionFe

.1.3.6.1.4.1.353.5.7.1.1.2.1.6

imaGroupSymmetry

Symmetry of the IMA group.

ImaGroupSymmetryr/w

Type Values:

1	symmetricOperation
2	asymmetricOperation
3	asymmetricConfiguration

.1.3.6.1.4.1.353.5.7.1.1.2.1.7

imaGroupMinNumTxLinks

Minimum number of transmit links required to be Active for

the IMA group to be in the Operational state.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.353.5.7.1.1.2.1.8

imaGroupMinNumRxLinks

Minimum number of receive links required to be Active for

the IMA group to be in the Operational state.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.353.5.7.1.1.2.1.9

imaGroupNeTxClkMode

Transmit clocking mode used by the near-end IMA group.

ImaGroupTxClkModer/w

Type Values:

1	ctc
2	itc

.1.3.6.1.4.1.353.5.7.1.1.2.1.10

imaGroupFeTxClkMode

Transmit clocking mode used by the far-end IMA group.

ImaGroupTxClkMode

Type Values:

1	ctc
2	itc

.1.3.6.1.4.1.353.5.7.1.1.2.1.11

imaGroupTxTimingRefLink

The ifIndex of the transmit timing reference link to be

used by the near-end for IMA data cell clock recovery from

the ATM layer. The distinguished value of zero may be used
…

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.353.5.7.1.1.2.1.12

imaGroupRxTimingRefLink

The ifIndex of the receive timing reference link to be

used by near-end for IMA data cell clock recovery toward

the ATM layer. The distinguished value of zero may be used

if…

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.353.5.7.1.1.2.1.13

imaGroupLastChange

The time-of-day the IMA group last changed operational

state (i.e., value of imaGroupNeState changed).

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.353.5.7.1.1.2.1.14

imaGroupTxImaId

The IMA ID currently in use by the near-end IMA function.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.7.1.1.2.1.15

imaGroupRxImaId

The IMA ID currently in use by the far-end IMA function.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.7.1.1.2.1.16

imaGroupTxFrameLength

The frame length to be used by the IMA group in the transmit

direction. Can only be set when the IMA group is startup.

ImaFrameLengthr/w

Type Values:

32	m32
64	m64
128	m128
256	m256

.1.3.6.1.4.1.353.5.7.1.1.2.1.17

imaGroupRxFrameLength

Value of IMA frame length as received from remote IMA function.

ImaFrameLength

Type Values:

32	m32
64	m64
128	m128
256	m256

.1.3.6.1.4.1.353.5.7.1.1.2.1.18

imaGroupDiffDelayMax

The maximum number of milliseconds of differential delay among

the links that will be tolerated on this interface.

MilliSecondsr/w

.1.3.6.1.4.1.353.5.7.1.1.2.1.19

imaGroupLeastDelayLink

The ifIndex of the link configured in the IMA group which has

the smallest link propagation delay. The distinguished value of

zero may be used if no link has been configured in the IMA gro…

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.353.5.7.1.1.2.1.20

imaGroupDiffDelayMaxObs

The latest maximum differential delay observed (in milliseconds)

between the links having the least and most link propagation delay,

among the receive links that are currently configured in…

MilliSeconds

.1.3.6.1.4.1.353.5.7.1.1.2.1.21

imaGroupAlphaValue

This indicates the 'alpha' value used to specify the number

of consecutive invalid ICP cells to be detected before moving

to the IMA Hunt state from the IMA Sync state.

Integer32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.353.5.7.1.1.2.1.22

imaGroupBetaValue

This indicates the 'beta' value used to specify the number

of consecutive errored ICP cells to be detected before moving

to the IMA Hunt state from the IMA Sync state.

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.353.5.7.1.1.2.1.23

imaGroupGammaValue

This indicates the 'gamma' value used to specify the number

of consecutive valid ICP cells to be detected before moving

to the IMA Sync state from the IMA PreSync state.

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.353.5.7.1.1.2.1.24

imaGroupRunningSecs

The amount of time (in seconds) since this IMA group has

been in the Operational state.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.25

imaGroupUnavailSecs

Count of one second intervals where the IMA Group Traffic

State Machine is Down.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.26

imaGroupNeNumFailures

The number of times a near-end group failure (Config-Aborted,

Insufficient-Links) has been reported since power-up or reboot.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.27

imaGroupFeNumFailures

The number of times a far-end group failure (Config-Aborted-FE,

Insufficient-Links-FE, Blocked-FE) has been reported since

power-up or reboot. This is an optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.28

imaGroupTxAvailCellRate

The current cell rate (truncated value in cells per second)

provided by this IMA group in the transmit direction,

considering all the transmit links in the Active state.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.29

imaGroupRxAvailCellRate

The current cell rate (truncated value in cells per second)

provided by this IMA group in the receive direction,

considering all the receive links in the Active state.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.30

imaGroupNumTxCfgLinks

The number of links that are configured to transmit in this IMA

group. This attribute overwrites the value of the

imaGroupNumRxActLinks attribute when the IMA group is configured
…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.31

imaGroupNumRxCfgLinks

The number of links that are configured to receive in this IMA

group. This attribute is overwritten by the value of the

imaGroupNumTxActLinks attribute when the IMA group is configured
…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.32

imaGroupNumTxActLinks

The number of links which are configured to transmit and are

currently Active in this IMA group.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.33

imaGroupNumRxActLinks

The number of links which are configured to receive and are

currently Active in this IMA group.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.2.1.34

imaGroupTestLinkIfIndex

This object is used to designate an interface as the test link

for use in the Test Pattern Procedure. The distinguished value of

zero specifies that the implementation may choose the Test …

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.353.5.7.1.1.2.1.35

imaGroupTestPattern

The value of this object is used to specify the Tx Test Pattern

in an IMA group loopback operation. A value in the range 0 to

255 designates a specific pattern. The distinguished value of…

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.353.5.7.1.1.2.1.36

imaGroupTestProcStatus

This object is used to enable or disable the

Test Pattern Procedure, and to note whether at least one

link failed the test.

The test is started …

ImaTestProcStatusr/w

Type Values:

1	disabled
2	operating
3	linkFail

.1.3.6.1.4.1.353.5.7.1.1.2.1.37

imaGroupValidIntervals

The number of previous 15 minute intervals for which valid data

was collected. The value will be 96 unless the IMA group table

entry was created within the last 24 hours, in which case the…

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.353.5.7.1.1.2.1.38

imaGroupInvalidIntervals

The number of intervals for which no valid data is available.

This attribute is only mandatory when the IMA Group Interval

Statistics and/or IMA Group Total Statistics objects are
…

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.353.5.7.1.1.2.1.39

imaGroupTimeElapsed

The number of seconds that have elapsed since the beginning of

the current measurement period. This attribute is only mandatory

when the IMA Group Current Statistics are implemented.

Integer32

Constraints:
range: 0-899

.1.3.6.1.4.1.353.5.7.1.1.2.1.40

imaGroupTxOamLabelValue

IMA OAM Label value transmitted by the NE IMA unit.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.353.5.7.1.1.2.1.41

imaGroupRxOamLabelValue

IMA OAM Label value transmitted by the FE IMA unit. The value 0

likely means that the IMA unit has not received an OAM Label

from the FE IMA unit at this time.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.7.1.1.2.1.42

imaGroupMappingTable

table

.1.3.6.1.4.1.353.5.7.1.1.3 · 1 row entry · 1 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk imaGroupMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMA-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMA-MIB::imaGroupMappingTable'

A table mapping the 'ifIndex' values of 'imaGroupIfIndex'
          
to the 'imaGroupIndex' values of the corresponding IMA group.

imaGroupMappingEntry row .1.3.6.1.4.1.353.5.7.1.1.3.1

Each row describes one ifIndex to imaGroupIndex mapping.

Indexes

IF-MIBifIndex

Column	Syntax	OID
imaGroupMappingIndex The imaGroupIndex of the IMA Group which implements the specified interface.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.353.5.7.1.1.3.1.1`

imaLinkTable

table

.1.3.6.1.4.1.353.5.7.1.1.4 · 1 row entry · 33 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk imaLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMA-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMA-MIB::imaLinkTable'

The IMA group Link Status and Configuration table.

imaLinkEntry row .1.3.6.1.4.1.353.5.7.1.1.4.1

An entry in the IMA Group Link table.

Indexes

imaLinkIfIndex

Column Syntax OID

imaLinkIfIndex

This corresponds to the 'ifIndex' of the MIB-II interface

on which this link is established. This object also

corresponds to the logical number ('ifIndex') assigned to

this …

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.353.5.7.1.1.4.1.1

imaLinkRowStatus

The imaLinkRowStatus object allows create, change, and delete

operations on imaLinkTable entries.

To create a new conceptual row (or instance) of the imaLinkTa…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.353.5.7.1.1.4.1.2

imaLinkGroupIndex

The value which identifies the IMA group (imaGroupIndex)

of which this link is a member.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.7.1.1.4.1.3

imaLinkNeTxState

The current state of the near-end transmit link.

Type Values:

1	notInGroup
2	unusableNoGivenReason
3	unusableFault
4	unusableMisconnected
5	unusableInhibited
6	unusableFailed
7	usable
8	active

.1.3.6.1.4.1.353.5.7.1.1.4.1.4

imaLinkNeRxState

The current state of the near-end receive link.

Type Values:

1	notInGroup
2	unusableNoGivenReason
3	unusableFault
4	unusableMisconnected
5	unusableInhibited
6	unusableFailed
7	usable
8	active

.1.3.6.1.4.1.353.5.7.1.1.4.1.5

imaLinkFeTxState

The current state of the far-end transmit link as reported

via ICP cells.

Type Values:

1	notInGroup
2	unusableNoGivenReason
3	unusableFault
4	unusableMisconnected
5	unusableInhibited
6	unusableFailed
7	usable
8	active

.1.3.6.1.4.1.353.5.7.1.1.4.1.6

imaLinkFeRxState

The current state of the far-end receive link as reported

via ICP cells.

Type Values:

1	notInGroup
2	unusableNoGivenReason
3	unusableFault
4	unusableMisconnected
5	unusableInhibited
6	unusableFailed
7	usable
8	active

.1.3.6.1.4.1.353.5.7.1.1.4.1.7

imaLinkNeRxFailureStatus

The current link failure status of the near-end receive link.

ImaLinkFailureStatus

Type Values:

1	noFailure
2	imaLinkFailure
3	lifFailure
4	lodsFailure
5	misConnected
6	blocked
7	fault
8	farEndTxLinkUnusable
9	farEndRxLinkUnusable

.1.3.6.1.4.1.353.5.7.1.1.4.1.8

imaLinkFeRxFailureStatus

The current link failure status of the far-end receive link

as reported via ICP cells.

ImaLinkFailureStatus

Type Values:

1	noFailure
2	imaLinkFailure
3	lifFailure
4	lodsFailure
5	misConnected
6	blocked
7	fault
8	farEndTxLinkUnusable
9	farEndRxLinkUnusable

.1.3.6.1.4.1.353.5.7.1.1.4.1.9

imaLinkTxLid

The outgoing LID used currently on the link by the local end.

This value has meaning only if the link belongs to an IMA group.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.353.5.7.1.1.4.1.10

imaLinkRxLid

The incoming LID used currently on the link by the remote

end as reported via ICP cells. This value has meaning only

if the link belongs to an IMA group.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.353.5.7.1.1.4.1.11

imaLinkRelDelay

The latest measured delay on this link relative to the link, in

the same IMA group, with the least delay.

MilliSeconds

.1.3.6.1.4.1.353.5.7.1.1.4.1.12

imaLinkImaViolations

ICP violations: count of errored, invalid or missing ICP cells,

except during SES-IMA or UAS-IMA conditions.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.13

imaLinkOifAnomalies

The number of OIF anomalies, except during SES-IMA or UAS-IMA

conditions, at the near-end. This is an optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.14

imaLinkNeSevErroredSecs

Count of one second intervals containing >= 30% of the ICP cells

counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,

AIS, or LCD), LIF defects, or LODS defects, except duri…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.15

imaLinkFeSevErroredSecs

Count of one second intervals containing one or more RDI-IMA

defects, except during UAS-IMA-FE condition.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.16

imaLinkNeUnavailSecs

Count of unavailable seconds at near-end: unavailability begins

at the onset of 10 contiguous SES-IMA and ends at the onset

of 10 contiguous seconds with no SES-IMA.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.17

imaLinkFeUnavailSecs

Count of unavailable seconds at far-end: unavailability begins

at the onset of 10 contiguous SES-IMA-FE and ends at the onset of

10 contiguous seconds with no SES-IMA-FE.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.18

imaLinkNeTxUnusableSecs

Tx Unusable seconds: count of Tx Unusable seconds at the near-end

Tx LSM.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.19

imaLinkNeRxUnusableSecs

Rx Unusable seconds: count of Rx Unusable seconds at the near-end

Rx LSM.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.20

imaLinkFeTxUnusableSecs

Tx Unusable seconds at far-end: count of seconds with Tx Unusable

indications from the far-end Tx LSM.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.21

imaLinkFeRxUnusableSecs

Rx Unusable seconds at far-end: count of seconds with Rx Unusable

indications from the far-end Rx LSM.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.22

imaLinkNeTxNumFailures

The number of times a near-end transmit failure alarm condition

has been entered on this link (i.e., some form of implementation

specific transmit fault).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.23

imaLinkNeRxNumFailures

The number of times a near-end receive failure alarm condition

has been entered on this link (i.e., LIF, LODS,

RFI-IMA, Mis-Connected or some form of implementation specific receive
…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.24

imaLinkFeTxNumFailures

The number of times a far-end transmit failure alarm condition

has been entered on this link (i.e., Tx-Unusable-FE). This is an

optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.25

imaLinkFeRxNumFailures

The number of times a far-end receive failure alarm condition

has been entered on this link (i.e., Rx-Unusable-FE). This is an

optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.26

imaLinkTxStuffs

Count of stuff events inserted in the transmit direction.

This is an optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.27

imaLinkRxStuffs

Count of stuff events detected in the receive direction.

This is an optional attribute.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.7.1.1.4.1.28

imaLinkRxTestPattern

This object identifies the test pattern received in the

ICP Cell (octet 17) on the link during the IMA Test Pattern

Procedure. This value may then be compared to the transmitted
…

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.7.1.1.4.1.29

imaLinkTestProcStatus

This value indicates the current state of the Test Pattern

Procedure. If the value is disabled(1), the test is not

running. A value of operating(2) means the test is running
…

ImaTestProcStatus

Type Values:

1	disabled
2	operating
3	linkFail

.1.3.6.1.4.1.353.5.7.1.1.4.1.30

imaLinkValidIntervals

The number of previous 15 minute intervals for which valid data

was collected. The value will be 96 unless the IMA group table

entry was created within the last 24 hours, in which case the…

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.353.5.7.1.1.4.1.31

imaLinkInvalidIntervals

The number of intervals for which no valid data is available.

This attribute is only mandatory when the IMA Link Interval

Statistics and/or IMA Link Total Statistics objects are
…

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.353.5.7.1.1.4.1.32

imaLinkTimeElapsed

The number of seconds that have elapsed since the beginning of

the current measurement period. This attribute is only mandatory

when the IMA Link Current Statistics are implemented.

Integer32

Constraints:
range: 0-899

.1.3.6.1.4.1.353.5.7.1.1.4.1.33

imaGroupCurrentTable

table

.1.3.6.1.4.1.353.5.7.1.1.7 · 1 row entry · 3 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk imaGroupCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMA-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMA-MIB::imaGroupCurrentTable'

The IMA Group Current table.

imaGroupCurrentEntry row .1.3.6.1.4.1.353.5.7.1.1.7.1

An entry in the IMA Group Current table.

Indexes

imaGroupIndex imaGroupIntervalNumber

Column	Syntax	OID
imaGroupCurrentUnavailSecs Count of one second intervals where the IMA Group Traffic State Machine is Down in the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.7.1.1`
imaGroupCurrentNeNumFailures The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.7.1.2`
imaGroupCurrentFeNumFailures The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in the current 15 minutes interval. This is an optional attribute.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.7.1.3`

imaGroupIntervalTable

table

.1.3.6.1.4.1.353.5.7.1.1.8 · 1 row entry · 4 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk imaGroupIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMA-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMA-MIB::imaGroupIntervalTable'

The IMA Group Interval table.

imaGroupIntervalEntry row .1.3.6.1.4.1.353.5.7.1.1.8.1

An entry in the IMA Group Interval table.

Indexes

Column	Syntax	OID
imaGroupIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 interval…	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.353.5.7.1.1.8.1.1`
imaGroupIntervalUnavailSecs Count of one second intervals where the IMA Group Traffic State Machine is Down in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.8.1.2`
imaGroupIntervalNeNumFailures The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.8.1.3`
imaGroupIntervalFeNumFailures The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in one of the previous 96, individual 15 minute, intervals. This is an …	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.7.1.1.8.1.4`

imaGroupTotalTable

table

.1.3.6.1.4.1.353.5.7.1.1.9 · 1 row entry · 3 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk imaGroupTotalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMA-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMA-MIB::imaGroupTotalTable'

The IMA Group Total table.

imaGroupTotalEntry row .1.3.6.1.4.1.353.5.7.1.1.9.1

An entry in the IMA Group Total table.

Indexes