SL-SONET-MIB Table View

The SONET/SDH configuration table. This table has objects 
for configuring sonet lines.

slSonetConfigEntry row .1.3.6.1.4.1.4515.1.6.1.1.1

An entry in the table. There is an entry for each SONET line
in the table. Entries are automatically created for an
ifType value of sonet(39). 'ifAdminStatus' from the ifTable
must be used to enable or disable a line…

Indexes

IF-MIBifIndex

Column	Syntax	OID
slSonetConfigFrameScramble This object is used to disable or enable the Scrambling option in SONET line. Please refer to GR-253-CORE for frame scrambling.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.4515.1.6.1.1.1.1
slSonetConfigType This object represents the configured line type for Trunks: sonetSts48c(5) - 1 x Sts48 (2.5GbTrunk) sonetSts192c(12) - 1 x Sts192 (10Gb Trunk) sonetStsOther(13) - for OC-n interfaces see slSonetFsTable.	Enumerationr/w Enumerated Values: 1 sonetSts3 2 sonetSts3c 3 sonetSts12 4 sonetSts12c 5 sonetSts48c 6 sonetSts3cx4 7 sonetSts48 8 sonetSts3cx16 9 sonetSts3x16 10 sonetSts12cx4 11 sonetSts12x4 12 sonetSts192c 13 sonetStsOther	.1.3.6.1.4.1.4515.1.6.1.1.1.2
slSonetConfigDccSelection This object selects the DCC type.	Enumerationr/w Enumerated Values: 1 sonetLineDcc 2 sonetSectionDcc 3 sonetInband	.1.3.6.1.4.1.4515.1.6.1.1.1.3
slSonetResetAllCounters Setting this variable to 1 will cause all of the counters (performance regsters) on this SONET interface to be initialized to zero (0).	Enumerationr/w Enumerated Values: 1 resetCounters	.1.3.6.1.4.1.4515.1.6.1.1.1.4
slSonetPortThresholdTrapEnable This variable indicates whether threshold traps should be generated for this SONET interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4515.1.6.1.1.1.5
slSonetConfigSdThreshold This object contains the Bit Error Rate threshold for Signal Degrade detection on the working line. Once this threshold is exceeded, an APS switch will occur. This value is 10 to -n where n is between 5 and 9 (read-writ…	Integer32r/w Constraints: range: 5-9	.1.3.6.1.4.1.4515.1.6.1.1.1.6
slSonetConfigSfThreshold This object contains the Bit Error Rate threshold for Signal Fault detection on the working line. Once this threshold is exceeded, an APS switch will occur. This value is 10 to the -n, where n is between 3 and 5. (read-…	Integer32r/w Constraints: range: 3-5	.1.3.6.1.4.1.4515.1.6.1.1.1.7
slSonetCompression This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two …	Enumerationr/w Enumerated Values: 0 uncompress 1 posCompress32 2 posCompress16	.1.3.6.1.4.1.4515.1.6.1.1.1.9
slSonetOverheadTunneling The section and line overhead tunneling configuration: none(0) - no tunneling support lineDcc(1) - line DCC tunneling k1k2(2) - line DCC + protection k byte full(3) - all transport overhead bytes are tunnel…	Enumerationr/w Enumerated Values: 0 none 1 lineDcc 2 k1k2 3 full	.1.3.6.1.4.1.4515.1.6.1.1.1.10
slSonetLopBitmask The LOP status. Each bit of the bits represent the status of the LOP alarm in corresponding STS. For a path with more than a single STS, only the value of the first STS in the path is relevant. This object is relevant o…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.6.1.1.1.11
slSonetTdmTrunk This object is applicable only to the OC-n ports. TRUE - means that the OC-n port is used as a TDM Trunk. FLASE - means normal OC-n port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.6.1.1.1.12
slSonetFsApply Writing to this object activate the slSonetFsTable setting. This allow the NMS to do many changes to the slSonetFsTable and then APPLY them at once. This prevent from going through unconsistent steps. This object always…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.6.1.1.1.13
slSonetTxLte The SS bits to transmit (bits 5,6 in H1,H1*).	Enumerationr/w Enumerated Values: 1 ssb00 2 ssb10 5 auto	.1.3.6.1.4.1.4515.1.6.1.1.1.14
slSonetReceivedLte The detected LTE type, according to the received SS bits (bits 5,6 in H1,H1*).	Enumeration Enumerated Values: 1 ssb00 2 ssb10 3 ssb01 4 ssb11 5 ssbinv	.1.3.6.1.4.1.4515.1.6.1.1.1.15
slSonetResetPmThreshold Setting this variable to 1 will reset the PM threshold parameters to the factory defaults.	Enumerationr/w Enumerated Values: 1 resetCounters	.1.3.6.1.4.1.4515.1.6.1.1.1.16
slSonetResetAlsParams Setting this variable to 1 will reset the ALS parameters to the factory defaults.	Enumerationr/w Enumerated Values: 1 resetCounters	.1.3.6.1.4.1.4515.1.6.1.1.1.17
slSonetTransceiverType The tranceiver type.	Enumeration Enumerated Values: 1 none 2 shortWave 3 longWave	.1.3.6.1.4.1.4515.1.6.1.1.1.18
slSonetTransceiverMedia The tranceiver media.	Enumeration Enumerated Values: 1 none 2 sm 3 mm	.1.3.6.1.4.1.4515.1.6.1.1.1.19

The SONET/SDH Trace table. This table contains 
objects for tracing the sonet section and path.

slSonetTraceEntry row .1.3.6.1.4.1.4515.1.6.2.1.1.1

An entry in the trace table. Entries exist for active sonet
interfaces. The objects in this table are used to verify
continued connection between the two ends of the line.

Indexes

IF-MIBifIndex

Column	Syntax	OID
slSonetTraceMode Determine the Trace Message Mode.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 monitoring	.1.3.6.1.4.1.4515.1.6.2.1.1.1.1
slSonetTraceToTransmit Sonet Trace To Transmit. This is string that is transmitted to perform Sonet trace diagnostics. The trace string is repetitively transmited so that a trace receiving terminal can verify its continued connection to t…	OctetStringr/w Constraints: range: 0-62	.1.3.6.1.4.1.4515.1.6.2.1.1.1.2
slSonetTraceToExpect Sonet Trace Massage To Expect. The receiving terminal verifies if the incoming string matches this string. The value of 'slSonetTraceFailure' indicates whether a trace mismatch occurred. The default value is a zero-…	OctetStringr/w Constraints: range: 0-62	.1.3.6.1.4.1.4515.1.6.2.1.1.1.3
slSonetTraceFailure The value of this object is set to 'true' when Sonet Section received trace does not match the 'slSonetTraceToExpect'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.6.2.1.1.1.4
slSonetTraceReceived This object is used to view the Sonet Trace Message that is received by the receiving terminal. The Agent is responsible to pad the end of the string with <CR><LF>.	OctetString Constraints: range: 0-62	.1.3.6.1.4.1.4515.1.6.2.1.1.1.5

The SONET/SDH Signal Label table. This table contains 
signal label for the sonet path.

slSonetSlEntry row .1.3.6.1.4.1.4515.1.6.2.2.1.1

An entry in the SONET/SDH Signal Label table. The entries
exist for active sonet lines. The objects in this table are
used to verify continued connection between the two ends of
the line.

Indexes

IF-MIBifIndex

Column	Syntax	OID
slSonetSlToTransmit Sonet Signal Label To Transmit.	SignalLabelr/w Type Values: 0 sigUnequipped 1 sigEquipped 2 sigPathFloatVt 3 sigPathLoackedVt 4 sigPathAsynchDs3 5 sigPathSyntran 18 sigPathAsyncDs4na 19 sigPathAtm 20 sigPathDqdb 21 sigPathFddi 22 sigPathHdlc 27 sigPathGfp	.1.3.6.1.4.1.4515.1.6.2.2.1.1.2
slSonetSlToExpect Sonet Signal Label To Expect.	SignalLabelr/w Type Values: 0 sigUnequipped 1 sigEquipped 2 sigPathFloatVt 3 sigPathLoackedVt 4 sigPathAsynchDs3 5 sigPathSyntran 18 sigPathAsyncDs4na 19 sigPathAtm 20 sigPathDqdb 21 sigPathFddi 22 sigPathHdlc 27 sigPathGfp	.1.3.6.1.4.1.4515.1.6.2.2.1.1.3
slSonetSlFailure The value of this object is set to 'true' when Sonet received signal label does not match the 'slSonetSlToExpect'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.6.2.2.1.1.4
slSonetSlReceived This object is used to view the Sonet Signal Label that is received by the receiving terminal.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4515.1.6.2.2.1.1.5

The POS PM Table.

slSonetPosEntry row .1.3.6.1.4.1.4515.1.6.6.1.1

The entries exist for active Trunk sonet lines
ifType = pos(171). The objects in this table are
used to moitor the POS layer.

Indexes

IF-MIBifIndex

Column	Syntax	OID
slSonetPosFcs The Number of FCS Errors.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4515.1.6.6.1.1.1
slSonetPosAbort The Number of Aborted packets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4515.1.6.6.1.1.2
slSonetPosMinViolation The Number of Minimum length violation packets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4515.1.6.6.1.1.3
slSonetPosMaxViolation The Number of Maximum length violation packets.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4515.1.6.6.1.1.4
slSonetPosRxfifoDiscard The Number of packets discarded due to RXFIFO error.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4515.1.6.6.1.1.5
slSonetPosPacketReceived The Number of packets received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.6.6.1.1.6
slSonetPosPacketReceivedOk The Number of error free packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4515.1.6.6.1.1.7

The ALS configuration Table.

slSonetAlsEntry row .1.3.6.1.4.1.4515.1.6.7.1.1

The entries exist for active sonet lines
ifType = sonet(39). The objects in this table are
used to configure the ALS algorithm.

Indexes

IF-MIBifIndex

Column	Syntax	OID
slSonetAlsMode Enable/Disable the ALS algorithm. Note that the if the Laser Admin Status is 'down' the ALS mechanism is not operational.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4515.1.6.7.1.1.1
slSonetLosDeclareTime Time to declare optical LOS present or clear: 550 +- 50 msec.	Enumerationr/w Enumerated Values: 1 ms500 2 ms550 3 ms600	.1.3.6.1.4.1.4515.1.6.7.1.1.2
slSonetTestPulseTime Manual restart for test Pulse time (in manual restart) - 90+-10 sec.	Enumerationr/w Enumerated Values: 1 s80 2 s90 3 s100	.1.3.6.1.4.1.4515.1.6.7.1.1.3
slSonetManualPulseTime Manual restart Pulse time (in manual mode) - 2+-0.25 sec.	Enumerationr/w Enumerated Values: 1 ms1750 2 ms2000 3 ms2250	.1.3.6.1.4.1.4515.1.6.7.1.1.4
slSonetAutomaticPulseTime Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec.	Enumerationr/w Enumerated Values: 1 ms1750 2 ms2000 3 ms2250	.1.3.6.1.4.1.4515.1.6.7.1.1.5
slSonetAutomaticDelayTime In Automatic mode. The delay between two laser re-activations.	Integer32r/w Constraints: range: 60-300	.1.3.6.1.4.1.4515.1.6.7.1.1.6
slSonetLaserTestActivate Activate the laser for test operation.	Enumerationr/w Enumerated Values: 1 activate	.1.3.6.1.4.1.4515.1.6.7.1.1.7
slSonetLaserManualActivate Activate the laser manual operation.	Enumerationr/w Enumerated Values: 1 activate	.1.3.6.1.4.1.4515.1.6.7.1.1.8

The frame structure configuration Table.
In order to define a new path the NMS should create and configure
an entry in this table.
The table is also used to monitor the status of the LOP
alarm per path.

slSonetFsEntry row .1.3.6.1.4.1.4515.1.6.8.1.1

The entries exist for sonet paths
ifType = sonet(39). The objects in this table are
used to configure the frame structure.
Each OC-N line interface shall maintain a static
table with number of lines equal to the N.
In…

Indexes

slSonetFsIfIndex slSonetFsSts

Column	Syntax	OID
slSonetFsIfIndex The interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4515.1.6.8.1.1.1
slSonetFsSts The number of the first STS in the path. Note that no all values are legal because there is no support for combus with mixed structure	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.6.8.1.1.2
slSonetFsWidth The number STS's in the path. The width is only valid for the first STS in the path. The other STSs of the path will have width=0.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4515.1.6.8.1.1.3
slSonetFsFullPathTermination FALSE - means partial path termination (only LOP alarm). TRUE - include full support for path Alarms and PM counters.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4515.1.6.8.1.1.4
slSonetFsGranularity This value is set by the NMS according to the configured frame structure. Each VC-3 that is mapped to AUG-1 via VC-4 should have the value vc4(1). Otherwise the value should be vc3(2).	Enumerationr/w Enumerated Values: 1 vc4 2 vc3	.1.3.6.1.4.1.4515.1.6.8.1.1.5