Standard view Table view

SL-DRY-CON-MIB

        This MIB module describes the Dry Contacts.
Source file
SL-DRY-CON-MIB
Last revised
Identity
slDryConMib
Base OID
1.3.6.1.4.1.4515.1.7
Imported Objects
IF-MIB ifIndex InterfaceIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount PerfTotalCount
SL-NE-MIB sitelight
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC DisplayString RowStatus TruthValue
Net-SNMP examples using the smartoptics MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SL-DRY-CON-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SL-DRY-CON-MIB::slDryConMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SL-DRY-CON-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SL-DRY-CON-MIB::slDryConMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (20)
slDryConMib
.1.3.6.1.4.1.4515.1.7
slDryConOut
.1.3.6.1.4.1.4515.1.7.1
slDryConAlarmCutoff r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.1.1
slDryConOutTable
.1.3.6.1.4.1.4515.1.7.1.2
slDryConOutEntry
slDryConOutIndex
 .1.3.6.1.4.1.4515.1.7.1.2.1
slDryConOutIndex
Integer32
 .1.3.6.1.4.1.4515.1.7.1.2.1.1
slDryConOutCommand r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.1.2.1.2
slDryConOutActiveStatus
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.4515.1.7.1.2.1.3
slDryConIn
.1.3.6.1.4.1.4515.1.7.2
slDryConLastChange
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.1
slDryConInTable
.1.3.6.1.4.1.4515.1.7.2.2
slDryConInEntry
slDryConInIndex
 .1.3.6.1.4.1.4515.1.7.2.2.1
slDryConInIndex
Integer32
 .1.3.6.1.4.1.4515.1.7.2.2.1.1
slDryConInDescription r/w
OctetString
 .1.3.6.1.4.1.4515.1.7.2.2.1.2
slDryConInSeverity r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.2.1.3
slDryConInEnable r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.2.1.4
slDryConInPolarity r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.2.1.5
slDryConInStatus
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.2.1.6
slDryConInAlmType r/w
Enumeration
 .1.3.6.1.4.1.4515.1.7.2.2.1.7
slDryConTraps
.1.3.6.1.4.1.4515.1.7.3
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. PerfHist-TC-MIBrfc
  8. SL-NE-MIBsmartoptics
  9. SL-DRY-CON-MIBsmartopticsselected
Notifications / Traps (1)
NameOIDDescription
slDryConStatusChangeTrap
slDryConInIndex slDryConInStatus slDryConInAlmType
.1.3.6.1.4.1.4515.1.7.3.1
An slDryConStatusChangeTrap notification is sent when
the the Status of an input dry contact is changed and the
corresponding alarm is enabled.
In order to shoten the Trap, the DisplayString that
describes the alarm is not sent. To find out this string
the NMS should use the index and get it from the table.