RAD-MIB Table View

This table indicates  the destination address of the traps.
Internally it will be limited to ten addresses.

mngEntry row .1.3.6.1.4.1.164.6.2.7.1

An entry in table.

Indexes

mngID

Column	Syntax	OID
mngID This value indicates an index of a specific IP address	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.7.1.1
mngIP This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.2.7.1.2
mngIPMaskdeprecated This value indicates the mask of the destination addresses of the traps.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.2.7.1.3
mngTrapMask The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.7.1.4
mngAlarmTrapMask The value of this object determines the alarm traps that the agent should mask (not send to this manager). The value is an Octet String, where each bit is assigned to a certain trap. If the bit = 1, the trap will be…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.164.6.2.7.1.5
mngSnmpTrapUdpPort This variable enables to set the UDP port (socket) used for SNMP traps.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.2.7.1.6

This table includes the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
over-written by new traps

trapEntry row .1.3.6.1.4.1.164.6.2.11.1

An entry in table.

Indexes

trapID

Column	Syntax	OID
trapID This value indicates an index of a specific trap	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.11.1.1
trapVal This value is the actual ASCII description of the trap.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.11.1.2
trapTimeSinceOccurrence This value indicates the amount of time passed since the occurrence of the event that trigger this trap.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.2.11.1.3

This parameters table is for 
internal Software down load. It also includes data 
about all files contained in the Object from which 
down-load is performed.

intSwdlEntry row .1.3.6.1.4.1.164.6.2.12.10.1

An entry in table.

Indexes

intSwdlObjIdx intSwdlFileIdx

Column	Syntax	OID
intSwdlObjIdx The index of the object from which down-load is performed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.10.1.1
intSwdlFileIdx The index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.10.1.2
intSwdlFileName The name of the file.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.10.1.3
intSwdlFileSwVer The software version of the file.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.10.1.4
intSwdlSwDate The software version date of the file.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.10.1.5
intSwdlSize The size of the file.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.10.1.6
intSwdlCmd The command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.	Enumerationr/w Enumerated Values: 1 notApplicable 2 off 3 on	.1.3.6.1.4.1.164.6.2.12.10.1.7
intSwdlToSubSystem This object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see product specification. For every octet bit0=LSB, bit7=MSB	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.164.6.2.12.10.1.8
intSwdlCardType This object defines the Card type that this file is relevant for.	Enumeration Enumerated Values: 1 unknown 220 gstm1 221 goc3 222 gstm1D 223 goc3D 270 serverE1 271 serverT1 272 serverE1Pw 273 serverT1Pw 280 gigabitEth 290 channelizedT3Pw1 300 cesT128 301 cesE128 302 cesT1Pw28 303 cesE1Pw28 310 vmxE1VeDe 311 vmxE1VeDi 312 vmxE1ViDe 313 vmxE1ViDi 314 vmxT1VeDe 315 vmxT1VeDi 316 vmxT1ViDe 317 vmxT1ViDi 318 vc12E1UeNe 319 vc12E1UeNi 320 vc12E1UiNe 321 vc12E1UiNi 322 vc12T1UeNe 323 vc12T1UeNi 324 vc12T1UiNe 325 vc12T1UiNi	.1.3.6.1.4.1.164.6.2.12.10.1.9
intSwdlFlashIdx The index of the flash memory this file is stored in (1 or 2) (Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (intSwdlFlashIdx=2).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.10.1.10

This parameters table is for software download status. 
It also includes data about the files down-loaded or 
attempted to be down-loaded.

swdlStatusEntry row .1.3.6.1.4.1.164.6.2.12.11.1

An entry in table.

Indexes

swdlStatusTypeIdx swdlStatusIdx

Column	Syntax	OID
swdlStatusTypeIdx The index of the down-load type (e.g. external (1) or internal (2)).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.11.1.1
swdlStatusIdx The index of the status rows.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.11.1.2
swdlStatusFileName The name of the file.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.11.1.3
swdlStatusSlot The slot of the updated (or attempted to be updated) object.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.11.1.4
swdlStatusSubSystem The subsystem that updated (or attempted to be updated).	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.11.1.5
swdlStatusStatus The status of the down load process. Value: Fail (2), OK (3), InProcess (4).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.11.1.6
swdlStatusTime This MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.6.2.12.11.1.7

Scheduling configuration table for 
Agent initiated file transfer.

autoFileTransferEntry row .1.3.6.1.4.1.164.6.2.12.13.1.1

An entry in the table.

Indexes

autoFileTransferType

Column	Syntax	OID
autoFileTransferType This object defines the type of file to be transferred by agent.	Enumeration Enumerated Values: 1 alarmsBuffer	.1.3.6.1.4.1.164.6.2.12.13.1.1.1
autoFileTransferServerIp This object defines the IP Address of the server to which the file is uploaded.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.2.12.13.1.1.2
autoFileTransferFileName This object defines the name of the file to be uploaded.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.2.12.13.1.1.3
autoFileTransferScheduling This object defines schedule for TFTP Automatic session(s) initiated by Agent, according to the value selected: now - initiate immediate single session. recurrence- initiate single session 'eve…	Enumerationr/w Enumerated Values: 1 notApplicable 2 now 3 recurrence	.1.3.6.1.4.1.164.6.2.12.13.1.1.4
autoFileTransferTimeRecurrence This object defines time reccurence interval, e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApplicable). This object is taken into account only if autoF…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.13.1.1.5
autoFileTransferOccurrenceRecurrence This object defines Occurrence reccurence interval, e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Reccurence. (0= notApplicable) This object is taken into acco…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.2.12.13.1.1.6