ALTEON-TS-PHYSICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
128

agPortCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.2.3.2 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk agPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::agPortCurCfgTable' 
The table of port configuration in the current_configuration block.
agPortCurCfgTableEntry row .1.3.6.1.4.1.1872.2.1.2.3.2.1
A row in the port table in the current_configuration block.
Indexes
Column Syntax OID
agPortCurCfgIndxmandatory
The index of the row in port configurations table.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.1
agPortCurCfgPrefLinkmandatory
This is the preferred link.
Enumeration
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.2
agPortCurCfgBackLinkmandatory
This is the backup link.
Enumeration
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
4none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.3
agPortCurCfgStatemandatory
This is the state of the port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.4
agPortCurCfgVlanTagmandatory
This is VLAN tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.5
agPortCurCfgStpmandatory
This object is used to turn Spanning Tree on or off for the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.6
agPortCurCfgRmonmandatory
This object is used to turn RMON on or off on the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.7
agPortCurCfgPVIDmandatory
The default VLAN ID for the port.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.8
agPortCurCfgFastEthAutoNegmandatory
This object is used to turn the autonegotiation on or off
for fast Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.9
agPortCurCfgFastEthSpeedmandatory
Selects the port speed for fast Ethernet connection.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs10or100
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.10
agPortCurCfgFastEthModemandatory
This object is used to select port mode for fast Ethernet connection.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.11
agPortCurCfgFastEthFctlmandatory
Selects the port flow control for fast Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.12
agPortCurCfgGigEthAutoNegmandatory
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.13
agPortCurCfgGigEthFctlmandatory
This object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.14
agPortCurCfgPortNamemandatory
The switch port name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.15
agPortCurCfgBwmContractmandatory
The switch port Bandwidth Management contract number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.16
agPortCurCfgDiscardNonIPsmandatory
Enable or disable to discard all non-IP traffic on the switch port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.17
agPortCurCfgLinkTrapmandatory
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.18

agPortNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.2.3.3 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk agPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::agPortNewCfgTable' 
The table of port configuration in the new_configuration block.
agPortNewCfgTableEntry row .1.3.6.1.4.1.1872.2.1.2.3.3.1
A row in the port configuration table in the new_configuration block.
Indexes
Column Syntax OID
agPortNewCfgIndxmandatory
The index of the row in port configurations table.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.1
agPortNewCfgPrefLinkmandatory
This is the preferred link.
Enumerationr/w
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.2
agPortNewCfgBackLinkmandatory
This is the backup link.
Enumerationr/w
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
4none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.3
agPortNewCfgStatemandatory
This is the state of the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.4
agPortNewCfgVlanTagmandatory
This is VLAN tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.5
agPortNewCfgStpmandatory
This object is used to turn Spanning Tree on or off for the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.6
agPortNewCfgRmonmandatory
This object is used to turn RMON on or off on the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.7
agPortNewCfgPVIDmandatory
The default VLAN ID for the port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.8
agPortNewCfgFastEthAutoNegmandatory
This object is used to turn the autonegotiation on or off
for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.9
agPortNewCfgFastEthSpeedmandatory
Selects the port speed for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4mbs10or100
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.10
agPortNewCfgFastEthModemandatory
This object is used to select port mode for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.11
agPortNewCfgFastEthFctlmandatory
Selects the port flow control for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.12
agPortNewCfgGigEthAutoNegmandatory
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.13
agPortNewCfgGigEthFctlmandatory
This object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.14
agPortNewCfgPortNamemandatory
The switch port name.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.15
agPortNewCfgBwmContractmandatory
The switch port Bandwidth Management contract number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.16
agPortNewCfgDiscardNonIPsmandatory
Enable or disable to discard all non-IP traffic on the switch port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.17
agPortNewCfgLinkTrapmandatory
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.18

vlanCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::vlanCurCfgTable' 
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.1872.2.1.4.2.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanCurCfgVlanIdmandatory
The VLAN identifier.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.4.2.1.1
vlanCurCfgVlanNamemandatory
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.1.4.2.1.2
vlanCurCfgPortsmandatory
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.4.2.1.3
vlanCurCfgStatemandatory
Enable or disable a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.2.1.4
vlanCurCfgJumbomandatory
Enable or Disable the Jumbo frame support for the VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.2.1.5
vlanCurCfgBwmContractmandatory
Default contract number the VLAN
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.2.1.6
vlanCurCfgStgmandatory
The Spanning Tree Group for the VLAN.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.2.1.7

vlanNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.4.3 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::vlanNewCfgTable' 
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.1872.2.1.4.3.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanNewCfgVlanIdmandatory
The VLAN identifier.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.4.3.1.1
vlanNewCfgVlanNamemandatory
The VLAN name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.1.4.3.1.2
vlanNewCfgPortsmandatory
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.4.3.1.3
vlanNewCfgStatemandatory
Enable or disable a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.3.1.4
vlanNewCfgJumbomandatory
Enable or Disable the Jumbo frame support for the VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.3.1.5
vlanNewCfgAddPortmandatory
The port to be added to the specified VLAN. A '0' value is
returned when read.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.6
vlanNewCfgRemovePortmandatory
The port to be removed from the specified VLAN. A '0'
value is returned when read.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.7
vlanNewCfgDeletemandatory
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.4.3.1.8
vlanNewCfgBwmContractmandatory
Default contract number for the VLAN.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.9
vlanNewCfgStgmandatory
The Spanning Tree Group for the VLAN.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.10

trunkGroupCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.7.2 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::trunkGroupCurCfgTable' 
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.1872.2.1.7.2.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupCurCfgIndexmandatory
The identifier of the trunk group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.2.1.1
trunkGroupCurCfgPortsmandatory
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.7.2.1.2
trunkGroupCurCfgStatemandatory
Enable or disable a trunk group.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.1.7.2.1.3
trunkGroupCurCfgBwmContractmandatory
Default BW contract of a trunk group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.2.1.4

trunkGroupNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.7.3 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::trunkGroupNewCfgTable' 
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.1872.2.1.7.3.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupNewCfgIndexmandatory
The identifier of the trunk group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.1
trunkGroupNewCfgPortsmandatory
The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.7.3.1.2
trunkGroupNewCfgAddPortmandatory
The port to be added in the trunk group. When read, 0 is returned.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.3
trunkGroupNewCfgRemovePortmandatory
The port to be deleted from the trunk group. when read, 0
is returned.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.4
trunkGroupNewCfgStatemandatory
Enable or disable a trunk group.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.1.7.3.1.5
trunkGroupNewCfgDeletemandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.7.3.1.6
trunkGroupNewCfgBwmContractmandatory
Default BW contract of a trunk group.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.7

portCpuStatsUtilTable

table mandatory
.1.3.6.1.4.1.1872.2.1.8.17.1 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portCpuStatsUtilTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::portCpuStatsUtilTable' 
The table of port CPU utilization.
portCpuStatsUtilTableEntry row .1.3.6.1.4.1.1872.2.1.8.17.1.1
A row in the port CPU utilization table.
Indexes
Column Syntax OID
portCpuStatsUtilIndxmandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.1
portCpuAStatsUtil1Secondmandatory
The utilization of port CPU A over 1 second. It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.2
portCpuBStatsUtil1Secondmandatory
The utilization of port CPU B over 1 second. It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.3
portCpuAStatsUtil4Secondsmandatory
The utilization of port CPU A over 4 seconds.
It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.4
portCpuBStatsUtil4Secondsmandatory
The utilization of port CPU B over 4 seconds.
It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.5
portCpuAStatsUtil64Secondsmandatory
The utilization of port CPU A over 64 seconds.
It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.6
portCpuBStatsUtil64Secondsmandatory
The utilization of port CPU B over 64 seconds.
It shows the percentage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.7

portStatsTable

table mandatory
.1.3.6.1.4.1.1872.2.1.8.26.1 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::portStatsTable' 
The table of port statistics.
portStatsTableEntry row .1.3.6.1.4.1.1872.2.1.8.26.1.1
A row in the port stats table.
Indexes
Column Syntax OID
portStatsIndxmandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.1
portStatsPhyIfInOctetsmandatory
The total number of octets received on the
interface, including framing characters.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.2
portStatsPhyIfInUcastPktsmandatory
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.3
portStatsPhyIfInNUcastPktsmandatory
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.4
portStatsPhyIfInDiscardsmandatory
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.5
portStatsPhyIfInErrorsmandatory
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.6
portStatsPhyIfInUnknownProtosmandatory
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.7
portStatsPhyIfOutOctetsmandatory
The total number of octets transmitted out of the
interface, including framing characters.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.8
portStatsPhyIfOutUcastPktsmandatory
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.9
portStatsPhyIfOutNUcastPktsmandatory
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.10
portStatsPhyIfOutDiscardsmandatory
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.11
portStatsPhyIfOutErrorsmandatory
The number of outbound packets that could not be
transmitted because of errors.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.12
portStatsPhyIfOutQLenmandatory
The length of the output packet queue (in
packets).
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.13
portStatsPhyIfInBroadcastPktsmandatory
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.14
portStatsPhyIfOutBroadcastPktsmandatory
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.15

portInfoTable

table mandatory
.1.3.6.1.4.1.1872.2.1.9.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::portInfoTable' 
The table of port information.
portInfoTableEntry row .1.3.6.1.4.1.1872.2.1.9.1.1.1
A row in the port information table.
Indexes
Column Syntax OID
portInfoIndxmandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.1
portInfoSpeedmandatory
The current operational speed of the port.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.2
portInfoModemandatory
The current operational mode of the port.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.3
portInfoFlowCtrlmandatory
The current operational flow control of the port.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.4
portInfoLinkmandatory
The current operational link status of the port.
Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.5
portInfoPhyIfDescrmandatory
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.6
portInfoPhyIfTypemandatory
The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.7
portInfoPhyIfMtumandatory
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.8
portInfoPhyIfPhysAddressmandatory
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet str…
RFC1213-MIBPhysAddress .1.3.6.1.4.1.1872.2.1.9.1.1.1.9
portInfoPhyIfOperStatusmandatory
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.10
portInfoPhyIfLastChangemandatory
The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.11

pmCurCfgPortMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::pmCurCfgPortMonitorTable' 
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.1872.2.1.18.1.3.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmCurCfgPmirrMoniPortIndexmandatory
The monitoring port number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.1
pmCurCfgPmirrMirrPortIndexmandatory
The mirrored port number
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.2
pmCurCfgPmirrDirectionmandatory
The type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.3

pmNewCfgPortMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::pmNewCfgPortMonitorTable' 
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.1872.2.1.18.1.4.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmNewCfgPmirrMoniPortIndexmandatory
The monitoring port number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.1
pmNewCfgPmirrMirrPortIndexmandatory
The mirrored port number
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.2
pmNewCfgPmirrDirectionmandatory
The type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.3
pmNewCfgPmirrDeletemandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.4

pmCurCfgVlanMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmCurCfgVlanMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::pmCurCfgVlanMonitorTable' 
The table of vlan based port mirroring.
pmCurCfgVlanMonitorEntry row .1.3.6.1.4.1.1872.2.1.18.2.3.1
A row in the monitoring vlan table.
Indexes
Column Syntax OID
pmCurCfgVmirrMoniPortIndexmandatory
The monitoring port number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.1
pmCurCfgVmirrMirrVlanIndexmandatory
The mirrored vlan number
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.2
pmCurCfgVmirrDirectionmandatory
The type of traffic to be monitored with respect to the
mirrored vlan.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.3

pmNewCfgVlanMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmNewCfgVlanMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::pmNewCfgVlanMonitorTable' 
The table of vlan-based port mirroring.
pmNewCfgVlanMonitorEntry row .1.3.6.1.4.1.1872.2.1.18.2.4.1
A row in the monitoring vlan table.
Indexes
Column Syntax OID
pmNewCfgVmirrMoniPortIndexmandatory
The monitoring port number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.1
pmNewCfgVmirrMirrVlanIndexmandatory
The mirrored vlan number
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.2
pmNewCfgVmirrDirectionmandatory
The type of traffic to be monitored with respect to the
mirrored vlan.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.3
pmNewCfgVmirrDeletemandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.4

stgCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.1 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::stgCurCfgTable' 
The table of Spanning Tree Groups configuration in the current_config.
stgCurCfgTableEntry row .1.3.6.1.4.1.1872.2.1.19.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgCurCfgIndexmandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1872.2.1.19.1.1.1
stgCurCfgStatemandatory
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.1.1.2
stgCurCfgVlanBmap1mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.1.1.3
stgCurCfgVlanBmap2mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.1.1.4

stgNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.2 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::stgNewCfgTable' 
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry row .1.3.6.1.4.1.1872.2.1.19.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgNewCfgIndexmandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1872.2.1.19.2.1.1
stgNewCfgStatemandatory
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.2.1.2
stgNewCfgDefaultCfgmandatory
Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w
Enumerated Values:
1default-config
 .1.3.6.1.4.1.1872.2.1.19.2.1.3
stgNewCfgAddVlanmandatory
The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.2.1.4
stgNewCfgRemoveVlanmandatory
The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.2.1.5
stgNewCfgVlanBmap1mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.2.1.6
stgNewCfgVlanBmap2mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.2.1.7

stgCurCfgPortTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.3 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::stgCurCfgPortTable' 
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry row .1.3.6.1.4.1.1872.2.1.19.3.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stgCurCfgStgIndexmandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.3.1.1
stgCurCfgPortIndexmandatory
The port identifier of a particular Spanning Tree Group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.3.1.2
stgCurCfgPortStatemandatory
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.3.1.3

stgNewCfgPortTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.4 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-TS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-TS-PHYSICAL-MIB::stgNewCfgPortTable' 
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry row .1.3.6.1.4.1.1872.2.1.19.4.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stgNewCfgStgIndexmandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.4.1.1
stgNewCfgPortIndexmandatory
The port identifier of a particular Spanning Tree Group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.4.1.2
stgNewCfgPortStatemandatory
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.4.1.3