ALTEON-CS-PHYSICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
27
Rows
27
Columns
245

vlanCurCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.1.2 · 1 row entry · 24 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vlanCurCfgTable' 
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.1.2.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanCurCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.1
vlanCurCfgVlanName
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.2
vlanCurCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.3
vlanCurCfgState
Enable or disable a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.4
vlanCurCfgBwmContract
Default contract number the VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.5
vlanCurCfgStg
The Spanning Tree Group for the VLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.6
vlanCurCfgJumbo
Enable or disable Jumbo frames on a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.7
vlanCurCfgLearn
Enable or disable source MAC address learning on a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.8
vlanCurCfgShared
Enable or disable shared property of a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.9
vlanCurCfgIpv6LlaGen
Enable/disable IPv6 Link Local Address Generation.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.10
vlanCurCfgRouterAdv
Enable/disable router advertisement.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.11
vlanCurCfgReTransInt
Retransmission interval.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.12
vlanCurCfgMinIntBwAdv
Minimum interval between router advertisements.
Integer32
Constraints:
range: 3-1800
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.13
vlanCurCfgMaxIntBwAdv
Maximum interval between router advertisements.
Integer32
Constraints:
range: 4-1800
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.14
vlanCurCfgMtu
Maximum Transmission Unit. Enter 0 for None.
Integer32
Constraints:
range: 1200-1500
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.15
vlanCurCfgCurHopLimit
Current hop limit field.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.16
vlanCurCfgMFlag
Enable / Disable Managed address configuration flag.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.17
vlanCurCfgOFlag
Enable / Disable Other address configuration flag.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.18
vlanCurCfgRTime
Reachable time.
Integer32
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.19
vlanCurCfgRlTime
Life Time.Enter 0 for None
Integer32
Constraints:
range: 0-9000
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.20
vlanCurCfgPlTime
Preferred life time.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.21
vlanCurCfgVlTime
Valid life time.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.22
vlanCurCfgOpInfo
Enable / Disable On-link flag in prefix.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.23
vlanCurCfgApInfo
Enable / Disable Autonomous address configuration flag in prefix.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.24

vlanNewCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.1.3 · 1 row entry · 27 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vlanNewCfgTable' 
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.1.3.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vlanNewCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.1
vlanNewCfgVlanName
The VLAN name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.2
vlanNewCfgPorts
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.3
vlanNewCfgState
Enable or disable a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.4
vlanNewCfgAddPort
The port to be added to the specified VLAN. A '0' value is
returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.5
vlanNewCfgRemovePort
The port to be removed from the specified VLAN. A '0'
value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.6
vlanNewCfgDelete
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.7
vlanNewCfgBwmContract
Default contract number for the VLAN.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.8
vlanNewCfgStg
The Spanning Tree Group for the VLAN.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.9
vlanNewCfgJumbo
Enable or disable Jumbo frames on a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.10
vlanNewCfgLearn
Enable or disable source mac address learning on a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.11
vlanNewCfgShared
Enable or disable shared property of a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.12
vlanNewCfgIpv6LlaGen
Enable/disable IPv6 Link Local Address Generation.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.13
vlanNewCfgRouterAdv
Enable/disable router advertisement.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.14
vlanNewCfgReTransInt
Retransmission interval.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.15
vlanNewCfgMinIntBwAdv
Minimum interval between router advertisements.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.16
vlanNewCfgMaxIntBwAdv
Maximum interval between router advertisements.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.17
vlanNewCfgMtu
Maximum Transmission Unit. Enter 0 for None.
Integer32r/w
Constraints:
range: 1200-1500
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.18
vlanNewCfgCurHopLimit
Current hop limit field.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.19
vlanNewCfgMFlag
Enable / Disable Managed address configuration flag.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.20
vlanNewCfgOFlag
Enable / Disable Other address configuration flag.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.21
vlanNewCfgRTime
Reachable time.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.22
vlanNewCfgRlTime
Life Time.Enter 0 for None
Integer32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.23
vlanNewCfgPlTime
Preferred life time.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.24
vlanNewCfgVlTime
Valid life time.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.25
vlanNewCfgOpInfo
Enable / Disable On-link flag in prefix.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.26
vlanNewCfgApInfo
Enable / Disable Autonomous address configuration flag in prefix.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.27

trunkGroupCurCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::trunkGroupCurCfgTable' 
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.2.2.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupCurCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.1
trunkGroupCurCfgPorts
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.2
trunkGroupCurCfgState
Enable or disable a trunk group.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.3
trunkGroupCurCfgBwmContract
Default BW contract of a trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.4
trunkGroupCurCfgName
Name of a trunk group.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.6

trunkGroupNewCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::trunkGroupNewCfgTable' 
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.2.3.1
A row in the trunk group configuration table.
Indexes
Column Syntax OID
trunkGroupNewCfgIndex
The identifier of the trunk group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.1
trunkGroupNewCfgPorts
The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.2
trunkGroupNewCfgAddPort
The port to be added in the trunk group. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.3
trunkGroupNewCfgRemovePort
The port to be deleted from the trunk group. when read, 0
is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.4
trunkGroupNewCfgState
Enable or disable a trunk group.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.5
trunkGroupNewCfgDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.6
trunkGroupNewCfgBwmContract
Default BW contract of a trunk group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.7
trunkGroupNewCfgName
Name of a trunk group.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.9

stgCurCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stgCurCfgTable' 
The table of Spanning Tree Group configuration.
stgCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.3.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgCurCfgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.1
stgCurCfgState
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.2
stgCurCfgPriority
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.5
stgCurCfgBrgHelloTime
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.6
stgCurCfgBrgForwardDelay
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32
Constraints:
range: 4-30
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.7
stgCurCfgBrgMaxAge
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32
Constraints:
range: 6-40
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.8
stgCurCfgAgingTime
The timeout period in seconds for aging out dynamically learned
forwarding information.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.9
stgCurCfgVlanBmap
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.10

stgNewCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.3.2 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stgNewCfgTable' 
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.3.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgNewCfgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.1
stgNewCfgState
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.2
stgNewCfgDefaultCfg
Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w
Enumerated Values:
1default-config
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.3
stgNewCfgAddVlan
The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.4
stgNewCfgRemoveVlan
The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.5
stgNewCfgPriority
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.8
stgNewCfgBrgHelloTime
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.9
stgNewCfgBrgForwardDelay
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 4-30
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.10
stgNewCfgBrgMaxAge
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32r/w
Constraints:
range: 6-40
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.11
stgNewCfgAgingTime
The timeout period in seconds for aging out dynamically learned
forwarding information.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.12
stgNewCfgVlanBmap
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.13

stgCurCfgPortTable

table
.1.3.6.1.4.1.1872.2.5.2.1.3.3 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stgCurCfgPortTable' 
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.3.3.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stgCurCfgStgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.1
stgCurCfgPortIndex
The port identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.2
stgCurCfgPortState
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.3
stgCurCfgPortPriority
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.4
stgCurCfgPortPathCost
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (if MSTP/RSTP is enabled
range is (0..200000000) else range is (0..65535) ).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.5
stgCurCfgPortLink
The type of the port link.
Enumeration
Enumerated Values:
1auto
2p2p
3shared
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.6
stgCurCfgPortEdge
The state of port edge.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.7

stgNewCfgPortTable

table
.1.3.6.1.4.1.1872.2.5.2.1.3.4 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stgNewCfgPortTable' 
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.3.4.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stgNewCfgStgIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.1
stgNewCfgPortIndex
The port identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.2
stgNewCfgPortState
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.3
stgNewCfgPortPriority
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.4
stgNewCfgPortPathCost
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (if MSTP/RSTP is enabled
range is (0..200000000) else range is (0..65535) ).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.5
stgNewCfgPortLink
The type of the port link.
Enumerationr/w
Enumerated Values:
1auto
2p2p
3shared
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.6
stgNewCfgPortEdge
The state of port edge.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.7

pmCurCfgPortMonitorTable

table
.1.3.6.1.4.1.1872.2.5.2.1.4.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::pmCurCfgPortMonitorTable' 
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmCurCfgPmirrMoniPortIndex
The monitoring port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndex
The mirrored port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.2
pmCurCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.3
pmCurCfgPmirrPortVlansBmap
The mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.6

pmNewCfgPortMonitorTable

table
.1.3.6.1.4.1.1872.2.5.2.1.4.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::pmNewCfgPortMonitorTable' 
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1
A row in the monitoring port table.
Indexes
Column Syntax OID
pmNewCfgPmirrMoniPortIndex
The monitoring port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndex
The mirrored port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.2
pmNewCfgPmirrDirection
The type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.3
pmNewCfgPmirrDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.4
pmNewCfgAddVlan
The VLAN whose traffic is to be mirrored for this port.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.7
pmNewCfgRemoveVlan
The VLAN whose traffic will no longer to be mirrored.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.8
pmNewCfgPmirrPortVlansBmap
The mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.9

lacpCurPortCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.5.7 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk lacpCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::lacpCurPortCfgTable' 
The table of LACP port configuration.
lacpCurPortCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.5.7.1
A row in the LACP port configuration table.
Indexes
Column Syntax OID
lacpCurPortCfgTableId
LACP port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.1
lacpCurPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumeration
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.2
lacpCurPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-only.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.3
lacpCurPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.4

lacpNewPortCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.5.8 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk lacpNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::lacpNewPortCfgTable' 
The table of LACP port configuration.
lacpNewPortCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.5.8.1
A row in the LACP port configuration table.
Indexes
Column Syntax OID
lacpNewPortCfgTableId
LACP port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.1
lacpNewPortState
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumerationr/w
Enumerated Values:
1off
2active
3passive
 .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.2
lacpNewPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.3
lacpNewPortActorAdminKey
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.4

mstCistCurCfgPortTable

table
.1.3.6.1.4.1.1872.2.5.2.1.7.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk mstCistCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::mstCistCurCfgPortTable' 
The table of CIST Port configuration.
mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1
Information about a particular CIST Port configuration.
Indexes
Column Syntax OID
mstCistCurCfgPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.1
mstCistCurCfgPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32
Constraints:
range: 0-240
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.2
mstCistCurCfgPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.3
mstCistCurCfgPortLinkType
The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumeration
Enumerated Values:
1auto
2p2p
3shared
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.4
mstCistCurCfgPortEdge
The value of the Edge Port parameter.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.5
mstCistCurCfgPortStpState
Turn port's Spanning Tree on/off.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.6
mstCistCurCfgPortHelloTime
The amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.7

mstCistNewCfgPortTable

table
.1.3.6.1.4.1.1872.2.5.2.1.7.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk mstCistNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::mstCistNewCfgPortTable' 
The table of CIST Port configuration.
mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1
Information about a particular CIST Port configuration.
Indexes
Column Syntax OID
mstCistNewCfgPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.1
mstCistNewCfgPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.2
mstCistNewCfgPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.3
mstCistNewCfgPortLinkType
The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumerationr/w
Enumerated Values:
1auto
2p2p
3shared
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.4
mstCistNewCfgPortEdge
The value of the Edge Port parameter.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.5
mstCistNewCfgPortStpState
Turn port's Spanning Tree on/off.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.6
mstCistNewCfgPortHelloTime
The amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.7

portTeamCurCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.9.2 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portTeamCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::portTeamCurCfgTable' 
The port team current configuration.
portTeamCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.9.2.1
A row in the port team configuration table.
Indexes
Column Syntax OID
portTeamCurCfgIndex
The identifier of the port team.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.1
portTeamCurCfgState
Enable or disable a port team.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.2
portTeamCurCfgPorts
The port list in the port team. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| …
OctetString .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.3
portTeamCurCfgTrunks
The trunk list in the port team. The trunks are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.4
portTeamCurCfgName
Name of the Port Team.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.5

portTeamNewCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.9.3 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portTeamNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::portTeamNewCfgTable' 
The port team new configuration.
portTeamNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.9.3.1
A row in the port team configuration table.
Indexes
Column Syntax OID
portTeamNewCfgIndex
The identifier of the port team.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.1
portTeamNewCfgState
Enable or disable a port team.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.2
portTeamNewCfgPorts
The port list in the port team. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| …
OctetString .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.3
portTeamNewCfgAddPort
The port to be added in the port team. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.4
portTeamNewCfgRemovePort
The port to be deleted from the port team. When read, 0is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.5
portTeamNewCfgTrunks
The trunk list in the port team. The trunks are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
…
OctetString .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.6
portTeamNewCfgAddTrunk
The trunk to be added in the port team. When read, 0 is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.7
portTeamNewCfgRemoveTrunk
The trunk to be deleted from the port team. When read, 0is returned.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.8
portTeamNewCfgDelete
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.9
portTeamNewCfgName
Name of the Port Team.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.10

vadcVlanCurCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.10.1 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vadcVlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vadcVlanCurCfgTable' 
The vADC table of VLAN configuration.
vadcVlanCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.10.1.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vadcVlanCurCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.1
vadcVlanCurCfgBwmCont
Default contract number for the VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.2
vadcVlanCurCfgNonIp
BWM contract for non-ip traffic
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.3
vadcVlanCurCfgIpv6LlaGen
Enable/disable IPv6 Link Local Address Generation.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.4
vadcVlanCurCfgRouterAdv
Enable/disable router advertisement.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.5
vadcVlanCurCfgReTransInt
Retransmission interval.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.6
vadcVlanCurCfgMinIntBwAdv
Minimum interval between router advertisements.
Integer32
Constraints:
range: 3-1800
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.7
vadcVlanCurCfgMaxIntBwAdv
Maximum interval between router advertisements.
Integer32
Constraints:
range: 4-1800
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.8
vadcVlanCurCfgMtu
Maximum Transmission Unit. Enter 0 for None.
Integer32
Constraints:
range: 1200-1500
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.9
vadcVlanCurCfgCurHopLimit
Current hop limit field.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.10
vadcVlanCurCfgMFlag
Enable / Disable Managed address configuration flag.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.11
vadcVlanCurCfgOFlag
Enable / Disable Other address configuration flag.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.12
vadcVlanCurCfgRTime
Reachable time.
Integer32
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.13
vadcVlanCurCfgRlTime
Life Time.Enter 0 for None
Integer32
Constraints:
range: 0-9000
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.14
vadcVlanCurCfgPlTime
Preferred life time.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.15
vadcVlanCurCfgVlTime
Valid life time.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.16
vadcVlanCurCfgOpInfo
Enable / Disable On-link flag in prefix.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.17
vadcVlanCurCfgApInfo
Enable / Disable Autonomous address configuration flag in prefix.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.1.1.18

vadcVlanNewCfgTable

table
.1.3.6.1.4.1.1872.2.5.2.1.10.2 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vadcVlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vadcVlanNewCfgTable' 
The vADC table of VLAN configuration.
vadcVlanNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.2.1.10.2.1
A row in the VLAN configuration table.
Indexes
Column Syntax OID
vadcVlanNewCfgVlanId
The VLAN identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.1
vadcVlanNewCfgBwmCont
Default contract number for the VLAN
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.2
vadcVlanNewCfgNonIp
BWM contract for non-ip traffic
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.3
vadcVlanNewCfgIpv6LlaGen
Enable/disable IPv6 Link Local Address Generation.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.4
vadcVlanNewCfgRouterAdv
Enable/disable router advertisement.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.5
vadcVlanNewCfgReTransInt
Retransmission interval.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.6
vadcVlanNewCfgMinIntBwAdv
Minimum interval between router advertisements.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.7
vadcVlanNewCfgMaxIntBwAdv
Maximum interval between router advertisements.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.8
vadcVlanNewCfgMtu
Maximum Transmission Unit. Enter 0 for None.
Integer32r/w
Constraints:
range: 1200-1500
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.9
vadcVlanNewCfgCurHopLimit
Current hop limit field.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.10
vadcVlanNewCfgMFlag
Enable / Disable Managed address configuration flag.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.11
vadcVlanNewCfgOFlag
Enable / Disable Other address configuration flag.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.12
vadcVlanNewCfgRTime
Reachable time.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.13
vadcVlanNewCfgRlTime
Life Time.Enter 0 for None
Integer32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.14
vadcVlanNewCfgPlTime
Preferred life time.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.15
vadcVlanNewCfgVlTime
Valid life time.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.16
vadcVlanNewCfgOpInfo
Enable / Disable On-link flag in prefix.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.17
vadcVlanNewCfgApInfo
Enable / Disable Autonomous address configuration flag in prefix.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.1.10.2.1.18

stgStatsPortTable

table
.1.3.6.1.4.1.1872.2.5.2.2.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stgStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stgStatsPortTable' 
The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.2.2.1.1
Statistics about port of a particular Spanning Tree Group.
Indexes
Column Syntax OID
stgStatsStpIndex
The identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.1
stgStatsPortIndex
The port identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.2
stgStatsPortRcvCfgBpdus
Number of Configuration BPDU's received on this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.3
stgStatsPortRcvTcnBpdus
Number of TCN BPDU's received on this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.4
stgStatsPortXmtCfgBpdus
Number of Configuration BPDU's trasmitted from the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.5
stgStatsPortXmtTcnBpdus
Number of TCN BPDU's trasmitted from the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.6

fdbTable

table
.1.3.6.1.4.1.1872.2.5.2.3.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk fdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::fdbTable' 
The table of FDB entries.
fdbEntry row .1.3.6.1.4.1.1872.2.5.2.3.1.2.1
A row in the FDB table
Indexes
Column Syntax OID
fdbMacAddr
The MAC address for the FDB entry.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.1
fdbVlan
The VLAN ID for the FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.2
fdbSrcPort
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.3
fdbState
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(3) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2ignore
3forward
4flood
5ffd
6trunk
7vir
8vsr
9vpr
10other
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.4
fdbRefSps
The referenced SPs associated with this FDB entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.5
fdbLearnedPort
The learned port associated with this FDB entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.6
fdbSrcTrunk
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.7

stpInfoTable

table
.1.3.6.1.4.1.1872.2.5.2.3.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stpInfoTable' 
The table of Spanning Tree Group information.
stpInfoTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.2.1.1
Information about a particular Spanning Tree Group.
Indexes
Column Syntax OID
stpInfoIndex
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.1
stpInfoTimeSinceTopChange
The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.2
stpInfoTopChanges
The total number of topology changes detected by this bridge since
the management entity was last reset or initialized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.3
stpInfoDesignatedRoot
The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs origi…
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.4
stpInfoRootCost
The cost of the path to the root as seen from this bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.5
stpInfoRootPort
The port number of the port which offers the lowest cost path from
this bridge to the root bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.6
stpInfoMaxAge
The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.7
stpInfoHelloTime
The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.8
stpInfoForwardDelay
This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.9
stpInfoHoldTime
This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.10

stpInfoPortTable

table
.1.3.6.1.4.1.1872.2.5.2.3.2.2 · 1 row entry · 12 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk stpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::stpInfoPortTable' 
The table of Spanning Tree Group port information.
stpInfoPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.2.2.1
Information about port configuration for a particular Spanning Tree
Group.
Indexes
Column Syntax OID
stpInfoPortStpIndex
The identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.1
stpInfoPortIndex
The port identifier of a particular Spanning Tree Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.2
stpInfoPortState
The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it wil…
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.3
stpInfoPortDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.4
stpInfoPortDesignatedCost
The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.5
stpInfoPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.6
stpInfoPortDesignatedPort
The Port Identifier of the port on the Designated Bridge for this
port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.7
stpInfoPortForwardTransitions
The number of times this port has transitioned from the Learning
state to the Forwarding state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.8
stpInfoPortPathCost
The path cost of the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.9
stpInfoPortRole
The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role.
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.10
stpInfoPortLinkType
The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this …
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.11
stpInfoPortEdge
The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.12

lacpInfoPortTable

table
.1.3.6.1.4.1.1872.2.5.2.3.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk lacpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::lacpInfoPortTable' 
The table of LACP port information.
lacpInfoPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.3.1.1
Information about a LACP port.
Indexes
Column Syntax OID
lacpInfoPortIndex
The port identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.1
lacpInfoPortSelected
Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…
Enumeration
Enumerated Values:
1selected
2unselected
3standby
 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.2
lacpInfoPortNtt
Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.3
lacpInfoPortReadyN
True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.4
lacpInfoPortMoved
Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.5

cistInfoPortTable

table
.1.3.6.1.4.1.1872.2.5.2.3.4.2 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk cistInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::cistInfoPortTable' 
The table of CIST Port information.
cistInfoPortTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.4.2.1
Information about a particular CIST Port.
Indexes
Column Syntax OID
cistInfoPortIndex
The port number of the port for which this entry contains spanning
tree configuration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.1
cistInfoPortPriority
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.2
cistInfoPortPathCost
The contribution of this port to the path cost of paths towards
the CIST Root which include this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.3
cistInfoPortState
Current state of the Port as defined by the Common
spanning tree protocol.
Enumeration
Enumerated Values:
1disabled
2discarding
4learning
5forwarding
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.4
cistInfoPortRole
Selected Port Role of the port for this spanning tree instance.
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.5
cistInfoPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.6
cistInfoPortDesignatedPort
The Port identifier of the port on the Designated Bridge
for this port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.7
cistInfoPortLinkType
The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that thi…
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.8

vlanInfoTable

table
.1.3.6.1.4.1.1872.2.5.2.3.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vlanInfoTable' 
The table of VLAN information.
vlanInfoTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.5.1.1
Information about a particular VLAN.
Indexes
Column Syntax OID
vlanInfoId
The VLAN identifier.
Integer32
Constraints:
range: 1-4090
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.1
vlanInfoName
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.2
vlanInfoStatus
Enable or disable, VLAN state information
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.3
vlanInfoJumbo
Enable or disable Jumbo frames, Jumbo frames state
information of a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.4
vlanInfoBwmContract
Default BWM contract number information of a VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.5
vlanInfoLearn
Enable or disable source MAC address learning, MAC address
learning information of a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.6
vlanInfoPorts
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|…
OctetString .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.7

vlanInfoTableVADC

table
.1.3.6.1.4.1.1872.2.5.2.3.5.2 · 1 row entry · 2 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk vlanInfoTableVADC
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::vlanInfoTableVADC' 
The table of VLAN information for vADC.
vlanInfoTableVADCEntry row .1.3.6.1.4.1.1872.2.5.2.3.5.2.1
Information about a particular VLAN for vADC.
Indexes
Column Syntax OID
vlanInfoIdx
The VLAN identifier.
Integer32
Constraints:
range: 1-4090
 .1.3.6.1.4.1.1872.2.5.2.3.5.2.1.1
vlanInfoVADC
Display the VADC number which is connected to this VLAN.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.5.2.3.5.2.1.2

portTeamInfoTable

table
.1.3.6.1.4.1.1872.2.5.2.3.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk portTeamInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTEON-CS-PHYSICAL-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTEON-CS-PHYSICAL-MIB::portTeamInfoTable' 
The port team information table.
portTeamInfoTableEntry row .1.3.6.1.4.1.1872.2.5.2.3.6.1.1
A row in the port team information table.
Indexes
Column Syntax OID
portTeamInfoIndex
The identifier of the port team.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.1
portTeamInfoState
State of a port team.
Enumeration
Enumerated Values:
1off
2passive
3active
 .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.2
portTeamInfoPorts
The port list in the port team. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| …
OctetString .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.3
portTeamInfoPortsState
The port state list in the port team. The ports states are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8 state…
OctetString .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.4
portTeamInfoTrunks
The trunk list in the port team. The trunks are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
…
OctetString .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.5
portTeamInfoTrunksState
The trunk state list in the trunk team. The trunks states are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8 s…
OctetString .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.6
portTeamInfoMaster
The master port/trunk of the port team when team state is ACTIVE.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.7