DC-BFD-STUB-MIB

        MIB module for BFD stub, based on draft-ietf-bfd-mib-03.txt
    
Source file
DC-BFD-STUB-MIB
Last revised
Identity
bfdMIB
Base OID
1.3.6.1.4.1.629.10.11
Imported Objects
DC-MASTER-TC AdminStatus EntityProcType InterfaceScope NpgOperStatus NumericIndex
IF-MIB InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI enterprises Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the mrv MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DC-BFD-STUB-MIB::bfdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::bfdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (52)
.1.3.6.1.4.1.629
opx
.1.3.6.1.4.1.629.10
.1.3.6.1.4.1.629.10.11
.1.3.6.1.4.1.629.10.11.0
.1.3.6.1.4.1.629.10.11.1
.1.3.6.1.4.1.629.10.11.1.1
.1.3.6.1.4.1.629.10.11.1.1.1
.1.3.6.1.4.1.629.10.11.1.1.1.1
.1.3.6.1.4.1.629.10.11.1.1.1.2
.1.3.6.1.4.1.629.10.11.1.1.1.3
.1.3.6.1.4.1.629.10.11.1.1.1.4
.1.3.6.1.4.1.629.10.11.1.1.1.5
microsecondsBfdInterval
.1.3.6.1.4.1.629.10.11.1.1.1.6
microsecondsBfdInterval
.1.3.6.1.4.1.629.10.11.1.1.1.7
.1.3.6.1.4.1.629.10.11.1.1.1.8
.1.3.6.1.4.1.629.10.11.1.2
.1.3.6.1.4.1.629.10.11.1.2.1
.1.3.6.1.4.1.629.10.11.1.2.1.1
.1.3.6.1.4.1.629.10.11.1.2.1.13
.1.3.6.1.4.1.629.10.11.1.2.1.14
.1.3.6.1.4.1.629.10.11.1.2.1.15
OctetString
.1.3.6.1.4.1.629.10.11.1.2.1.16
.1.3.6.1.4.1.629.10.11.1.2.1.27
.1.3.6.1.4.1.629.10.11.1.2.1.28
.1.3.6.1.4.1.629.10.11.1.2.1.29
Unsigned32
.1.3.6.1.4.1.629.10.11.1.2.1.4
Unsigned32
.1.3.6.1.4.1.629.10.11.1.2.1.5
Enumeration
.1.3.6.1.4.1.629.10.11.1.2.1.7
.1.3.6.1.4.1.629.10.11.1.2.1.9
.1.3.6.1.4.1.629.10.11.1.5
.1.3.6.1.4.1.629.10.11.1.5.1
.1.3.6.1.4.1.629.10.11.1.5.1.1
.1.3.6.1.4.1.629.10.11.1.5.1.2
.1.3.6.1.4.1.629.10.11.1.5.1.3
.1.3.6.1.4.1.629.10.11.1.6
.1.3.6.1.4.1.629.10.11.1.6.1
.1.3.6.1.4.1.629.10.11.1.6.1.10
.1.3.6.1.4.1.629.10.11.1.6.1.11
Unsigned32
.1.3.6.1.4.1.629.10.11.1.6.1.12
.1.3.6.1.4.1.629.10.11.1.6.1.13
.1.3.6.1.4.1.629.10.11.1.6.1.14
Bits
.1.3.6.1.4.1.629.10.11.1.6.1.2
.1.3.6.1.4.1.629.10.11.1.6.1.3
.1.3.6.1.4.1.629.10.11.1.6.1.4
OctetString
.1.3.6.1.4.1.629.10.11.1.6.1.5
.1.3.6.1.4.1.629.10.11.1.6.1.6
.1.3.6.1.4.1.629.10.11.1.6.1.7
.1.3.6.1.4.1.629.10.11.1.6.1.8
.1.3.6.1.4.1.629.10.11.1.6.1.9
.1.3.6.1.4.1.629.10.11.3
.1.3.6.1.4.1.629.10.11.3.1
.1.3.6.1.4.1.629.10.11.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (8)
Bits
packets(0)
receive(1)
send(2)
session(3)
state(4)
timer(5)
Enumeration
noDiagnostic(0)
controlDetectionTimeExpired(1)
echoFunctionFailed(2)
neighborSignaledSessionDown(3)
forwardingPlaneReset(4)
pathDown(5)
concatenatedPathDown(6)
administrativelyDown(7)
reverseConcatenatedPathDown(8)
misconnectivity(16)
noContact(255)
Unsigned32 range: 1..4294967295
Unsigned32 range: 0..4294967295
Enumeration
ifAtgPri(226492416)
ifAtgSck(696516608)
ifAtgBfdo(1518403584)
Enumeration
direct(1)
sck(2)
Unsigned32 range: 1..4294967295
Enumeration
adminDown(1)
down(2)
init(3)
up(4)
Compliance Statements (1)

OID .1.3.6.1.4.1.629.10.11.3.2.1
Compliance statement for agents that provide full
support for BFD-MIB. Such devices can
then be monitored and also be configured using
this MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
bfdSessAddrType
unknown(0), ipv4(1), ipv6(2)
Only unknown(0), ipv4(1) and ipv6(2) support
is required.
bfdSessAddr
OctetString
An implementation is only required to support
unknown(0), ipv4(1) and ipv6(2) sizes.