Juniper-SUBSCRIBER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

juniSubscrLocalTable

table
.1.3.6.1.4.1.4874.2.2.49.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniSubscrLocalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-SUBSCRIBER-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-SUBSCRIBER-MIB::juniSubscrLocalTable' 
Permits local configuration associating a remote subscriber's identity
with a local interface, for use in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).
juniSubscrLocalEntry row .1.3.6.1.4.1.4874.2.2.49.1.1.1.1
Local configuration associating a remote subscriber's identity with a
local interface.
Indexes
Column Syntax OID
juniSubscrLocalIfIndex
The ifIndex of the interface to which this subscriber information
applies.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.1
juniSubscrLocalEncaps
The incoming data encapsulation to which this subscriber information
applies. An interface may have a unique subscriber identity configured
for each incoming data encapsulation it supports.
JuniSubscrEncaps
Type Values:
0ip
19bridgedEthernet
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.2
juniSubscrLocalControl
When set to clear(1), causes the subscriber information in this entry
to be cleared. When set to ok(0), there is no effect and subscriber
information is unchanged.

When read, always returns a value of ok…
Enumerationr/w
Enumerated Values:
0ok
1clear
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.3
juniSubscrLocalNamePrefix
If enabled, indicates whether the value of juniSubscrLocalName is a
prefix rather than a full name.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.4
juniSubscrLocalName
The subscriber's name.

If juniSubscrLocalNamePrefix has the value 'enabled', the value of this
object serves as the prefix of a full subscriber name. The full name is
constructed by appending local geogr…
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5
juniSubscrLocalPasswordPrefix
If enabled, indicates whether the value of juniSubscrLocalPassword
prefix rather than a full password.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.6
juniSubscrLocalPassword
The subscriber's password.

If juniSubscrLocalPasswordPrefix has the value 'enabled', the value of
this object serves as the prefix of a full subscriber password. The
full password is constructed by appen…
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.7
juniSubscrLocalDomain
The subscriber's domain.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.8
juniSubscrLocalAuthentication
When enabled, the interface performs authentication with RADIUS server
using the configured subscriber information and associated with the
incoming data encapsulation (juniSubscriberLocalEncaps).
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.9