INTEL-LAN-ADAPTERS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
68

genericAdaptersAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk genericAdaptersAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::genericAdaptersAttrTable' 
Attributes common to all kinds of adapters.
genericAdapterAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.1.1.1
Attributes common to all kinds of adapters.
There is one 'entry' for each physical or virtual adapter.
Indexes
Column Syntax OID
adapterIndex
A unique value, greater than or equal to zero, for each interface.
InterfaceIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.1.1.1.1
adapterName
Name of the adapter interface.
There is a unique name for each instance.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.1.1.2
adapterType
Type of adapter (member, stand-alone, or virtual).
Enumeration
Enumerated Values:
0standAlone
1teamMember
2virtual
 .1.3.6.1.4.1.343.2.7.2.2.1.1.1.3
adapterDriverLoadStatus
Load status of the driver:
-'loaded' if the driver is loaded on the NIC; 'notLoaded' otherwise.
A status of 'notLoaded' means that the NIC is missing (via 'hotRemove')
or the driver is not fully loaded for some reason.
Enumeration
Enumerated Values:
0loaded
1notLoaded
 .1.3.6.1.4.1.343.2.7.2.2.1.1.1.4

genericAdaptersDriversAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk genericAdaptersDriversAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::genericAdaptersDriversAttrTable' 
Attributes common to all kinds of adapter drivers.
genericAdapterDriverAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.1.2.1
Attributes common to all kinds of adapter drivers.
There is one 'entry' for each adapter driver
Indexes
Column Syntax OID
adapterDriverName
Name of the adapter driver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.1
adapterDriverInfo
Additional information about the adapter. Includes name of the NIC.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.2
adapterDriverVersion
Adapter driver version number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.3
adapterDriverPath
Adapter driver path name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.4
adapterDriverDate
Adapter driver creation date (in mm/dd/yy format).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.5
adapterDriverSize
Adapter driver file size.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.6
adapterIpAddress
Adapter IP address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.1.2.1.7

genericAdaptersTrafficStatsAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.1.3 · 1 row entry · 10 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk genericAdaptersTrafficStatsAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::genericAdaptersTrafficStatsAttrTable' 
Traffic stats common to all kinds of adapters.
genericAdapterTrafficStatsAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.1.3.1
Traffic stats common to all kinds of adapters.
There is one 'entry' for each adapter instance.
Indexes
Column Syntax OID
adapterRxPackets
Total number of packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.1
adapterTxPackets
Total number of packets transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.2
adapterRxBytes
Total number of bytes received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.3
adapterTxBytes
Total number of bytes transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.4
adapterRxErrors
Total number of packets received with errors
(packets that failed to reach the protocol).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.5
adapterTxErrors
Total number of packets that failed to transmit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.6
adapterRxDropped
Total number of receive packets dropped due to overrun.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.7
adapterTxDropped
Total number of transmit packets dropped due to successive collisions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.8
adapterRxMulticast
Total number of Multicast packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.9
adapterCollisions
Total number of single collisions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.1.3.1.10

physicalAdaptersAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk physicalAdaptersAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::physicalAdaptersAttrTable' 
Attributes common to all Physical Adapters.
physicalAdapterAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.2.1.1
Attributes common to all Physical Adapters.
There is one 'entry' for each standalone or member adapter.
Indexes
Column Syntax OID
physicalAdapterIndex
A unique value, greater than or equal to zero, for each interface.
InterfaceIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.1
physicalAdapterLinkStatus
Physical adapter link status. Appears only if available -
that is, only if the driver is compliant with SNMP;
otherwise, NO_SUCH_NAME is returned.
Enumeration
Enumerated Values:
-1not-available
0link-up
1link-down
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.2
physicalAdapterLinkStatusChangesCounter
Number of changes in physical adapter link status.
Any change ('up-to-down' or 'down- to-up') is counted.
This value can be reset (to zero) by the user; no other value is permitted.
This value appears only if it is ava…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.3
physicalAdapterSpeed
Physical adapter speed (in Mbps).
Appears only for an SNMP-compliant adapter with link up.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.4
physicalAdapterDplxMode
Physical Adapter Duplex Mode.
Appears only for an SNMP-compliant adapter with link up.
Enumeration
Enumerated Values:
0not-available
1half
2full
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.5
physicalAdapterAutoNegotiation
Physical adapter autonegotiation mode.
This value appears only if it is available -
that is, only if the driver is compliant with SNMP;
otherwise, NO_SUCH_NAME is returned.
Enumeration
Enumerated Values:
0on
1off
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.6
physicalAdapterPciBus
Physical adapter PCI bus number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.7
physicalAdapterPciSlot
Physical adapter PCI slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.8
physicalAdapterIrq
Physical adapter Interrupt Request number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.9
physicalAdapterCurrentNA
Current MAC address of the physical adapter(in hex notation).
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.10
physicalAdapterPermanentNA
Permanent MAC address of the physical adapter(in hex notation).
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.11
physicalAdapterOnlineDiagStatus
The Online Diagnostics Status of the Physical Adapter.
Online Diagnostics consist of Link Test and other Hardware Tests.
Enumeration
Enumerated Values:
-1not-available
0failed
1passed
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.12
physicalAdapterExpressTeamed
Physical Adapter Express team status.
Appears only for an adapter with express teaming capability.
Enumeration
Enumerated Values:
0not-available
1primary
2secondary
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.13
physicalAdapterExpressTeamBundleId
Unique value to identify the express team in the system.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.2.1.1.14

physicalAdaptersAttrOffloadTable

table
.1.3.6.1.4.1.343.2.7.2.2.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk physicalAdaptersAttrOffloadTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::physicalAdaptersAttrOffloadTable' 
Attributes of offloading-enabled physical adapters.
There is one 'entry' for each SNMP-compliant physical adapter.
physicalAdapterAttrOffloadEntry row .1.3.6.1.4.1.343.2.7.2.2.2.2.1
Attributes of offloading-enabled physical adapters.
There is one 'entry' for each SNMP-compliant physical adapter.
Indexes
Column Syntax OID
physicalAdapterTcpRxChecksumOffLoadEnable
When enabled, TCP for 'receive' checksums are performed in hardware.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.1
physicalAdapterTcpRxChecksumBad
Number of bad 'receive' checksums.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.2
physicalAdapterTcpTxChecksumOffLoadEnable
When enabled, TCP for 'transmit' checksums are performed in hardware.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.3
physicalAdapterIpv4RxChecksumOffLoadEnable
When enabled, IPv4 for 'receive' checksums are performed in hardware.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.4
physicalAdapterIpv4TxChecksumOffLoadEnable
When enabled, IPv4 for 'receive' checksums are performed in hardware.
Enumeration
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.5
physicalAdapterIpv4TCPSegmentationOffLoadEnable
When enabled, TCP Segmentation is performed in hardware.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.343.2.7.2.2.2.2.1.6

virtualAdaptersAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk virtualAdaptersAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::virtualAdaptersAttrTable' 
Attributes common to all iANS-virtual adapters.
virtualAdapterAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.3.1.1
Attributes common to all iANS-virtual adapters.
There is one 'entry' for each virtual adapter
Indexes
Column Syntax OID
virtualAdapterIndex
A unique value, greater than or equal to zero, for each interface.
InterfaceIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.3.1.1.1
virtualAdapterAnsId
ID of the team to which the adapter belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.3.1.1.2

virtualAdaptersVlanAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.3.2 · 1 row entry · 1 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk virtualAdaptersVlanAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::virtualAdaptersVlanAttrTable' 
Attributes common to all iANS-virtual adapters VLANs.
virtualAdapterVlanAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.3.2.1
VLAN attributes.Appears for virtual adapters that support VLANs only.
There is one 'entry' for each VLAN.
Indexes
Column Syntax OID
virtualAdapterVlanId
ID for this virtual adapter VLAN.
Enumeration
Enumerated Values:
0none
 .1.3.6.1.4.1.343.2.7.2.2.3.2.1.1

ansAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk ansAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::ansAttrTable' 
ANS attributes.
ansAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.4.1.1
ANS attributes. There is one 'entry' for each team
Indexes
Column Syntax OID
ansId
ANS ID. A unique value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.4.1.1.1
ansNumberOfMembers
Number of member adapters in the team.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.4.1.1.2
ansNumberOfVirtualAdapters
Number of virtual adapters in the team.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.4.1.1.3

ansVlansAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.4.2 · 1 row entry · 1 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk ansVlansAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::ansVlansAttrTable' 
ANS attributes.
ansVlanAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.4.2.1
ANS VLAN attributes.
Appears only if VLAN is active. There is one 'entry' for each Vlan.
Indexes
Column Syntax OID
ansVlanTaggingType
Tagging type of the VLAN adapter.
Enumeration
Enumerated Values:
0none
1tag-802-1Q
2tag-802-1P
3tag-802-3AC
4tag-iSL
 .1.3.6.1.4.1.343.2.7.2.2.4.2.1.1

ansTeamsAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.4.3 · 1 row entry · 15 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk ansTeamsAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::ansTeamsAttrTable' 
ANS team attributes.
ansTeamAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.4.3.1
ANS team attributes. Appears only when adapter teaming exist.
There is one 'entry' for each team.
Indexes
Column Syntax OID
ansTeamName
Unique ANS team name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.1
ansTeamMode
Team mode.
Enumeration
Enumerated Values:
0adapter-fault-tolerance
1adaptive-load-balancing
2static-link-aggregation
4iEEE-802-3ad
5switch-fault-tolerance
6none
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.2
ansTeamLinkState
Team link state.
Aggregation of the link state of all team members ( 0 = some up).
Enumeration
Enumerated Values:
0up
1down
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.3
ansTeamSpeed
Team speed.Speed of the current primary member (in Mbps).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.4
ansTeamProbesState
If enabled, the ANS uses probes to check on its members.
Enumeration
Enumerated Values:
0probes-enabled
1probes-disabled
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.5
ansTeamProbesMode
Mode of probe usage.
Enumeration
Enumerated Values:
0broadcast
1multicast
2not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.6
ansTeamLoadBalanceRefresh
In seconds. If available, the number of seconds that passes before
the software resets or refreshes the current load across team members.
Enumeration
Enumerated Values:
0not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.7
ansTeamProbesSendTime
In seconds. If available,
the interval in seconds during which probe packets are sent.
Enumeration
Enumerated Values:
0not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.8
ansTeamPreferredPrimaryIndex
Index of the preferred primary member adapter.
Enumeration
Enumerated Values:
-1not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.9
ansTeamCurrentPrimaryIndex
Index of the current primary member adapter.
Enumeration
Enumerated Values:
-1not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.10
ansTeamPreviousPrimaryIndex
Index of the previous primary member adapter.
Enumeration
Enumerated Values:
-1not-available
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.11
ansTeamFailoverCounter
Failover counter -
that is, the number of failovers the team suffered.
This value can be reset by the user -
that is, it can be set to zero only; no other value is permitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.12
ansTeamSlaCompatible
Indicates compatibility with Static Link Aggregation mode
when in IEEE 802.3AD mode.
Enumeration
Enumerated Values:
-1not-available
0yes
1no
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.13
ansTeamAggrSelectionMode
Indicates aggregation selection mode when in IEEE 802.3AD mode.
Enumeration
Enumerated Values:
-1not-available
0bandwidth
1count
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.14
ansTeamRlbSupport
Indicates whether 'receive load balancing support' is enabled
when in AdaptiveLoadBalancing teaming mode.
(If disabled, only the transmission is balanced.)
Enumeration
Enumerated Values:
-1not-available
0enabled
1disabled
 .1.3.6.1.4.1.343.2.7.2.2.4.3.1.15

ansMembersAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk ansMembersAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::ansMembersAttrTable' 
Attributes common to all iANS-TeamMember Adapters.
ansMemberAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.5.1.1
Attributes common to all iANS-TeamMember Adapters.
There is one 'entry' for each team member adapter.
Indexes
Column Syntax OID
ansMemberIndex
A unique value for each member. The value is non-negative and identical
to the value of the physical adapter associated with this member.
InterfaceIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.5.1.1.1
ansMemberAnsId
ID of the ANS to which the Adapter belongs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.343.2.7.2.2.5.1.1.2

ansTeamMembersAttrTable

table
.1.3.6.1.4.1.343.2.7.2.2.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the intel variant from /opt/observium/mibs/intel.
Command help
Walk ansTeamMembersAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INTEL-LAN-ADAPTERS-MIB' -M '/opt/observium/mibs/intel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INTEL-LAN-ADAPTERS-MIB::ansTeamMembersAttrTable' 
Attributes common to all iANS-TeamMember Adapters.
ansTeamMemberAttrEntry row .1.3.6.1.4.1.343.2.7.2.2.5.2.1
Attributes of iANS-TeamMember Adapters related to adapter teaming.
Appears only if adapter teaming exists.
Indexes
Column Syntax OID
ansTeamMemberState
iANS-TeamMember adapter state.
Enumeration
Enumerated Values:
0active
1disabled
2standby
3active-secondary
 .1.3.6.1.4.1.343.2.7.2.2.5.2.1.1
ansTeamMemberFailureCounter
Failure counter - that is, the number of failovers from this member.
This value can be reset by the user -
that is, it can be set to zero only; no other value is permitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.343.2.7.2.2.5.2.1.2
ansTeamMemberPriority
Priority of the team member.
Enumeration
Enumerated Values:
0none
1primary
2secondary
 .1.3.6.1.4.1.343.2.7.2.2.5.2.1.3