IBM-BCCUSTOM-MIB Table View

Table-centric layout grouping table, row, and column objects.

MIB version

Standard view Table view

Tables

Rows

Columns

portInformationTable

table

.1.3.6.1.4.1.2.6.215.2.1.1 · 1 row entry · 18 columns

Open in standard view

Uses the ibm variant from /opt/observium/mibs/ibm.

Command help

Walk portInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-BCCUSTOM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-BCCUSTOM-MIB::portInformationTable'

Table that contains port information for the I/O Module.

portInformationEntry row .1.3.6.1.4.1.2.6.215.2.1.1.1

I/O Module port entry

Indexes

portModuleIndex portModuleType

Column Syntax OID

portModuleIndex

I/O Module port sequence index.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.2.1.1.1.1

portModuleType

Indicates the given port type of the I/O Module. The definitions of port types are:
unUsed: the value of zero indicates the request is for a real port index of the IOM
in the OID. In the port type GET operation, the ret…

Enumeration

Enumerated Values:

0	unUsed
1	externalPort
2	externalManagementPort
3	externalDualPort
4	bladePort
5	mmManagementPort
6	uplinkPort
7	interModulePort
8	interModuleManagementPort
9	interModuleDualPort
10	interModuleExternalBridgePort
11	interModuleInternalBridgePort

.1.3.6.1.4.1.2.6.215.2.1.1.1.2

portModuleLinkState

The current port link state of the I/O Module.
down: the physical port is down or off.
up: the physical port 817 is up and active
initialized: the physical port has completed initializion but is not active yet.

Enumerationr/w

Enumerated Values:

0	down
1	up
2	initialized

.1.3.6.1.4.1.2.6.215.2.1.1.1.3

portModuleLabel

The port string label of the I/O module. The IOM may allow for the port label to
be configured from the I/O Modules user interface but the default port label must
reflect.port type description as defined below:
Unu…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2.6.215.2.1.1.1.4

portModuleSpeed

The INTEGER value will indicate the current speed of the port.
The INTEGER values are defined as follows: A signed value is Half duplex, A unsigned value is FULL
Duplex. The value is the speed in multiple of 100 Mbps. T…

Enumerationr/w

Enumerated Values:

0	autoduplex
1	hundred-Mbpsfullduplex
10	one-Gbpsfullduplex
20	two-Gbpsfullduplex
40	four-Gbpsfullduplex
60	six-Gbpsfullduplex
80	eight-Gbpsfullduplex
100	ten-Gbpsfullduplex
140	fourteen-Gbpsfullduplex
160	sixteen-Gbpsfullduplex
200	twenty-Gbpsfullduplex
400	fourty-Gbpsfullduplex
560	fivtysix-Gbpsfullduplex
600	sixty-Gbpsfullduplex
800	eighty-Gbpsfullduplex
1000	hundred-Gbpsfullduplex
1120	hundredandtwelve-Gbpsfullduplex
1680	hundredandsixtyeight-Gbpsfullduplex

.1.3.6.1.4.1.2.6.215.2.1.1.1.5

portModuleMedia

The port media type of the I/O Module.

Enumeration

Enumerated Values:

0	copper
1	serdes
32	opticalShortHaul
40	opticalInterHaul
48	opticalLongHaul
255	other

.1.3.6.1.4.1.2.6.215.2.1.1.1.6

portModuleProtocol

The port protocol of the I/O Module.

Enumeration

Enumerated Values:

16	ethernet
32	fibreChannel
48	scalability
64	infiniband
80	pciExpress
112	myrinet
120	serial

.1.3.6.1.4.1.2.6.215.2.1.1.1.7

portModuleTotal

This value must return the the total number of ports supported on the IOM. This
value must be customized

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.2.1.1.1.8

portModuleSpeedList

The string contains all the available speed settings that is applicable to the port.
It is a special format so the application can parse the string to obtain all the
possible speed settings. The speeds supported are def…

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2.6.215.2.1.1.1.9

portModuleReal

To map from relative port index based on port type to the real port index of the
server.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.2.1.1.1.10

portModuleRelative

To map from real port index to the relative port index of the server.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.2.1.1.1.11

portModuleLaneCount

The value represents the number of lanes supported by the port.

Enumeration

Enumerated Values:

1	onex
2	twox
4	fourx
8	eightx
12	twelvex
16	sixteenx

.1.3.6.1.4.1.2.6.215.2.1.1.1.12

portModuleCableLength

The length (in meters) of the cable supported by this port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.2.1.1.1.13

portModuleCableManufacturer

A string that contains the cable manufacturer. The name cannot exceed 64 1028 octets.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2.6.215.2.1.1.1.14

portModuleCableCompatiblity

Indicates the compatibility of the external cable which is currently plugged into
this port.

Enumeration

Enumerated Values:

0	incompatible
1	compatible
2	compatibleButNotRecommnded

.1.3.6.1.4.1.2.6.215.2.1.1.1.15

portModuleCableType

A string that designates the external cable type for this port. The name cannot
exceed 64 octets. For example, Active Copper, Passive Copper, Active Fibre,
Passive Fibre.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2.6.215.2.1.1.1.16

portModuleDataRate

The value represents the data rate supported for this port. SDR (single data
rate), DDR (double data rate), QDR (quad data rate), EDR (enhanced data rate),
FDR (fourteen data rate).

Enumeration

Enumerated Values:

0	sdr
1	ddr
2	qdr
3	edr
4	fdr

.1.3.6.1.4.1.2.6.215.2.1.1.1.17

portModuleLicensedState

The value represents the port license state. If this port is a base port that does
not require a license key then the state will always indicate notApplicable. If the
port needs to be enabled by a license key then the s…

Enumeration

Enumerated Values:

0	notApplicable
1	notLicensed
2	licensed

.1.3.6.1.4.1.2.6.215.2.1.1.1.18

fwInformationTable

table

.1.3.6.1.4.1.2.6.215.3.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the ibm variant from /opt/observium/mibs/ibm.

Command help

Walk fwInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-BCCUSTOM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-BCCUSTOM-MIB::fwInformationTable'

Table of Firmware Image information.

fwInformationEntry row .1.3.6.1.4.1.2.6.215.3.1.1.1

I/O Module Firmware Image entry

Indexes

fwImageIndex

Column Syntax OID

fwImageIndex

Firmware Image index.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.3.1.1.1.1

fwImageInformation

Information about the image - This string must follow the format below:
Version: %s\n, Rel-Date: %s\n, Status: %s\n, Type: %s\n, Size: %s\n, Other-Info: %s\n\

Version: The version of the image and should …

OctetString

Constraints:
range: 0-1024

.1.3.6.1.4.1.2.6.215.3.1.1.1.2

fwImageFileLocation

This object indicates whether the IOM implementation of firmware updates has
requirements on the server that would prevent the MM acting as the server for
the image file(s). If there are no unique requirements then mmIs…

Enumeration

Enumerated Values:

0	mmServer
1	externalServerRequired

.1.3.6.1.4.1.2.6.215.3.1.1.1.3

fwImageProtocols

The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. 1310 That is the bit 0 will be the left most bit and bit…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2.6.215.3.1.1.1.4

systemFileInformationTable

table

.1.3.6.1.4.1.2.6.215.4.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the ibm variant from /opt/observium/mibs/ibm.

Command help

Walk systemFileInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-BCCUSTOM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-BCCUSTOM-MIB::systemFileInformationTable'

Table of System File information.

systemFileInformationEntry row .1.3.6.1.4.1.2.6.215.4.1.1.1

I/O Module System File entry

Indexes

systemFileIndex

Column	Syntax	OID
systemFileIndex System File index.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.2.6.215.4.1.1.1.1`
systemFileInformation Information about the system file(s) that are supported by the IOM, on which the CMM can perform a get or put operation from/to the IOM. Two types of files are mandatory for the IOM, service file and configuration file.…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.2.6.215.4.1.1.1.2`
systemFileInformationProtocols The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. That is the bit 0 will be the left most bit and bit 31 …	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.2.6.215.4.1.1.1.3`

licenseKeyInformationTable

table

.1.3.6.1.4.1.2.6.215.6.1 · 1 row entry · 3 columns

Open in standard view

Uses the ibm variant from /opt/observium/mibs/ibm.

Command help

Walk licenseKeyInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-BCCUSTOM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-BCCUSTOM-MIB::licenseKeyInformationTable'

Table of License key information.

licenseKeyInformationEntry row .1.3.6.1.4.1.2.6.215.6.1.1

License Key entry

Indexes

licenseKeyIndex

Column Syntax OID

licenseKeyIndex

License Key index.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2.6.215.6.1.1.1

licenseKeyDescStringInformation

Information about the system file - This string must follow the format below:
Description: %s\n, Date-Time: %s\n, License-ID: %s\n, Other-Info: %s\n\0

Description: Description of the license key feature, …

OctetString

Constraints:
range: 0-1024

.1.3.6.1.4.1.2.6.215.6.1.1.2

licenseKeyCurrentState

Provides information on the current state of the license

Enumeration

Enumerated Values:

0	unknown
1	valid
2	notValid
3	expired
4	usageExceeded

.1.3.6.1.4.1.2.6.215.6.1.1.3