MPLS-LSR-MIB
This MIB contains managed object definitions for the
Multiprotocol Label Switching (MPLS) Router as
defined in: Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
Internet Draft <draft-ietf-mpls-arch-06.txt>,
August 1999.
- Source file
MPLS-LSR-MIB- Last revised
- Identity
mplsLsrMIB- Base OID
1.3.6.1.3.96
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 experimental Gauge32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LSR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LSR-MIB::mplsLsrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LSR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LSR-MIB::mplsLsrMIB'
Objects (97)
Showing 97 of 97 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.3.96 |
||
.1.3.6.1.3.96.1 |
||
.1.3.6.1.3.96.1.1 |
||
.1.3.6.1.3.96.1.1.1 |
||
.1.3.6.1.3.96.1.1.1.1 |
||
.1.3.6.1.3.96.1.1.1.2 |
||
.1.3.6.1.3.96.1.1.1.3 |
||
.1.3.6.1.3.96.1.1.1.4 |
||
.1.3.6.1.3.96.1.1.1.5 |
||
.1.3.6.1.3.96.1.1.1.6 |
||
.1.3.6.1.3.96.1.1.1.7 |
||
|
Bits
|
.1.3.6.1.3.96.1.1.1.8 |
|
.1.3.6.1.3.96.1.1.1.9 |
||
|
Integer32
|
.1.3.6.1.3.96.1.10 |
|
|
Integer32
|
.1.3.6.1.3.96.1.11 |
|
.1.3.6.1.3.96.1.12 |
||
.1.3.6.1.3.96.1.12.1 |
||
|
Integer32
|
.1.3.6.1.3.96.1.12.1.1 |
|
|
Integer32
|
.1.3.6.1.3.96.1.12.1.2 |
|
.1.3.6.1.3.96.1.12.1.3 |
||
.1.3.6.1.3.96.1.12.1.4 |
||
.1.3.6.1.3.96.1.12.1.5 |
||
|
Integer32
|
.1.3.6.1.3.96.1.13 |
|
.1.3.6.1.3.96.1.14 |
||
.1.3.6.1.3.96.1.14.1 |
||
|
Integer32
|
.1.3.6.1.3.96.1.14.1.1 |
|
|
kilobits per secondMplsBitRate
|
.1.3.6.1.3.96.1.14.1.2 |
|
|
kilobits per secondMplsBitRate
|
.1.3.6.1.3.96.1.14.1.3 |
|
|
bytesMplsBurstSize
|
.1.3.6.1.3.96.1.14.1.4 |
|
.1.3.6.1.3.96.1.14.1.5 |
||
.1.3.6.1.3.96.1.14.1.6 |
||
|
|
.1.3.6.1.3.96.1.15 |
|
.1.3.6.1.3.96.1.2 |
||
.1.3.6.1.3.96.1.2.1 |
||
.1.3.6.1.3.96.1.2.1.1 |
||
.1.3.6.1.3.96.1.2.1.2 |
||
.1.3.6.1.3.96.1.2.1.3 |
||
.1.3.6.1.3.96.1.2.1.4 |
||
.1.3.6.1.3.96.1.3 |
||
.1.3.6.1.3.96.1.3.1 |
||
.1.3.6.1.3.96.1.3.1.1 |
||
.1.3.6.1.3.96.1.3.1.2 |
||
|
Integer32
|
.1.3.6.1.3.96.1.3.1.3 |
|
.1.3.6.1.3.96.1.3.1.4 |
||
|
Integer32
|
.1.3.6.1.3.96.1.3.1.5 |
|
.1.3.6.1.3.96.1.3.1.6 |
||
.1.3.6.1.3.96.1.3.1.7 |
||
.1.3.6.1.3.96.1.3.1.8 |
||
.1.3.6.1.3.96.1.3.1.9 |
||
.1.3.6.1.3.96.1.4 |
||
.1.3.6.1.3.96.1.4.1 |
||
.1.3.6.1.3.96.1.4.1.1 |
||
.1.3.6.1.3.96.1.4.1.2 |
||
.1.3.6.1.3.96.1.4.1.3 |
||
.1.3.6.1.3.96.1.4.1.4 |
||
.1.3.6.1.3.96.1.4.1.5 |
||
.1.3.6.1.3.96.1.4.1.6 |
||
|
Integer32
|
.1.3.6.1.3.96.1.5 |
|
.1.3.6.1.3.96.1.6 |
||
.1.3.6.1.3.96.1.6.1 |
||
|
Integer32
|
.1.3.6.1.3.96.1.6.1.1 |
|
.1.3.6.1.3.96.1.6.1.10 |
||
.1.3.6.1.3.96.1.6.1.11 |
||
.1.3.6.1.3.96.1.6.1.12 |
||
.1.3.6.1.3.96.1.6.1.2 |
||
.1.3.6.1.3.96.1.6.1.3 |
||
.1.3.6.1.3.96.1.6.1.4 |
||
.1.3.6.1.3.96.1.6.1.5 |
||
.1.3.6.1.3.96.1.6.1.6 |
||
.1.3.6.1.3.96.1.6.1.7 |
||
|
Integer32
|
.1.3.6.1.3.96.1.6.1.8 |
|
.1.3.6.1.3.96.1.6.1.9 |
||
.1.3.6.1.3.96.1.7 |
||
.1.3.6.1.3.96.1.7.1 |
||
.1.3.6.1.3.96.1.7.1.1 |
||
.1.3.6.1.3.96.1.7.1.2 |
||
.1.3.6.1.3.96.1.7.1.3 |
||
.1.3.6.1.3.96.1.7.1.4 |
||
.1.3.6.1.3.96.1.7.1.5 |
||
.1.3.6.1.3.96.1.7.1.6 |
||
|
Integer32
|
.1.3.6.1.3.96.1.8 |
|
.1.3.6.1.3.96.1.9 |
||
.1.3.6.1.3.96.1.9.1 |
||
|
Integer32
|
.1.3.6.1.3.96.1.9.1.1 |
|
|
|
.1.3.6.1.3.96.1.9.1.2 |
|
|
Integer32
|
.1.3.6.1.3.96.1.9.1.3 |
|
.1.3.6.1.3.96.1.9.1.4 |
||
|
|
.1.3.6.1.3.96.1.9.1.5 |
|
|
|
.1.3.6.1.3.96.1.9.1.6 |
|
.1.3.6.1.3.96.1.9.1.7 |
||
|
Enumeration
|
.1.3.6.1.3.96.1.9.1.8 |
|
|
Enumeration
|
.1.3.6.1.3.96.1.9.1.9 |
|
.1.3.6.1.3.96.2 |
||
.1.3.6.1.3.96.2.0 |
||
.1.3.6.1.3.96.3 |
||
.1.3.6.1.3.96.3.1 |
||
.1.3.6.1.3.96.3.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- MPLS-LSR-MIBciscoselected
Type Definitions (5)
| Integer32 |
range: 1..2147483647 |
|
| Integer32 |
range: 1..2147483647 |
|
| OctetString |
range: 0..31 |
|
| Unsigned32 |
range: 0..4294967295 |
|
| Enumeration |
other(1)snmp(2)ldp(3)rsvp(4)crldp(5)policyAgent(6)unknown(7) |
Conformance Groups (13)
|
mplsInterfaceLabelMinIn mplsInterfaceLabelMaxIn mplsInterfaceLabelMinOut mplsInterfaceLabelMaxOut mplsInterfaceTotalBandwidth mplsInterfaceAvailableBandwidth mplsInterfaceTotalBuffer (unresolved reference) mplsInterfaceAvailableBuffer (unresolved reference) mplsInterfaceLabelParticipationType mplsInterfaceConfStorageType
Collection of objects needed for MPLS interface
configuration and performance information. |
.1.3.6.1.3.96.3.1.1
|
|
|
mplsInSegmentNPop mplsInSegmentAddrFamily mplsInSegmentXCIndex mplsInSegmentOctets mplsInSegmentDiscards mplsInSegmentOwner mplsInSegmentAdminStatus (unresolved reference) mplsInSegmentOperStatus (unresolved reference) mplsInSegmentRowStatus mplsInSegmentTrapEnable (unresolved reference) mplsInSegmentStorageType mplsInSegmentTrafficParamPtr
Collection of objects needed to implement an in-
segment. |
.1.3.6.1.3.96.3.1.2
|
|
|
mplsOutSegmentIndexNext mplsOutSegmentIfIndex mplsOutSegmentPushTopLabel mplsOutSegmentTopLabel mplsOutSegmentNextHopIpAddrType mplsOutSegmentNextHopIpv4Addr mplsOutSegmentNextHopIpv6Addr mplsOutSegmentXCIndex mplsOutSegmentOwner mplsOutSegmentOctets mplsOutSegmentDiscards mplsOutSegmentErrors mplsOutSegmentAdminStatus (unresolved reference) mplsOutSegmentOperStatus (unresolved reference) mplsOutSegmentRowStatus mplsOutSegmentTrapEnable (unresolved reference) mplsOutSegmentStorageType mplsOutSegmentTrafficParamPtr
Collection of objects needed to implement an out-
segment. |
.1.3.6.1.3.96.3.1.3
|
|
|
mplsXCIndexNext mplsXCLspId mplsXCLabelStackIndex mplsXCOwner mplsXCAdminStatus mplsXCOperStatus mplsXCRowStatus mplsXCTrapEnable mplsXCStorageType
Collection of objects needed to implement a
cross-connect entry. |
.1.3.6.1.3.96.3.1.4
|
|
|
mplsInSegmentOctets mplsInSegmentPackets mplsInSegmentErrors mplsInSegmentDiscards mplsOutSegmentOctets mplsOutSegmentPackets mplsOutSegmentDiscards mplsInterfaceInLabelsUsed mplsInterfaceInPackets (unresolved reference) mplsInterfaceInDiscards (unresolved reference) mplsInterfaceFailedLabelLookup mplsInterfaceOutPackets (unresolved reference) mplsInterfaceOutDiscards (unresolved reference) mplsInterfaceOutFragments mplsInterfaceOutLabelsUsed
Collection of objects providing performance
information about an LSR. |
.1.3.6.1.3.96.3.1.5
|
|
|
Object(s) providing performance information
specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. |
.1.3.6.1.3.96.3.1.6
|
|
|
Object(s) providing performance information
specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. |
.1.3.6.1.3.96.3.1.7
|
|
|
mplsTrafficParamIndexNext mplsTrafficParamMaxRate mplsTrafficParamMeanRate mplsTrafficParamMaxBurstSize mplsTrafficParamRowStatus mplsTrafficParamStorageType
Object(s) required for supporting QoS resource
reservation. |
.1.3.6.1.3.96.3.1.8
|
|
|
Objects needed to support persistent cross-
connects. |
.1.3.6.1.3.96.3.1.9
|
|
|
Objects needed to support non-persistent cross-
connects. |
.1.3.6.1.3.96.3.1.10
|
|
|
mplsLabelStackLabel mplsLabelStackRowStatus mplsLabelStackStorageType mplsMaxLabelStackDepth mplsLabelStackIndexNext
Objects needed to support label stacking.
|
.1.3.6.1.3.96.3.1.11
|
|
|
A collection of objects providing information
specific to segment discontinuities.. |
.1.3.6.1.3.96.3.1.12
|
|
|
mplsInSegmentUp (unresolved reference) mplsInSegmentDown (unresolved reference) mplsOutSegmentUp (unresolved reference) mplsOutSegmentDown (unresolved reference) mplsXCUp mplsXCDown
Set of notifications implemented in this module.
None is mandatory. |
.1.3.6.1.3.96.3.1.13
|
Compliance Statements (1)
OID
.1.3.6.1.3.96.3.2.1Compliance statement for agents that support the
MPLS LSR MIB.
MPLS LSR MIB.
Required groups
| mandatory | mplsInSegmentGroup | |
| mandatory | mplsOutSegmentGroup | |
| mandatory | mplsXCGroup | |
| mandatory | mplsInterfaceGroup | |
| mandatory | mplsPerfGroup | |
| mandatory | mplsSegmentDiscontinuityGroup | |
| optional | mplsHCInSegmentPerfGroup |
This group is mandatory for those in-segment entries for which the object mplsInSegmentOutOctets wraps around too quickly. |
| optional | mplsHCOutSegmentPerfGroup |
This group is mandatory for those out-segment entries for which the object mplsOutSegmentOctets wraps around too quickly. |
| optional | mplsTrafficParamGroup |
This group is mandatory for those LSRs that support QoS resource reservation. |
| optional | mplsXCIsPersistentGroup |
This group is mandatory for devices which support persistent cross-connects. The following constraints apply: mplsXCIsPersistent must at least be read-only returning true(2). |
| optional | mplsXCIsNotPersistentGroup |
This group is mandatory for devices which support non-persistent cross-connects. The following constraints apply: mplsXCIsPersistent must at least be read-only returning false(1). |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsInterfaceConfStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
| mplsInSegmentXCIndex | Write access is not required. | ||
| mplsInSegmentNPop | readonly | Write access if not required. This object should be set to 1 if it is read-only. |
|
| mplsInSegmentAddrFamily | Write access is not required. A <value of other(0) should be supported because there may be cases where the agent may not know about or support any address types. |
||
| mplsInSegmentAdminStatus (unresolved reference) | readonly |
Enumeration
up(1), down(2)
|
A value of testing(3) need not be supported. |
| mplsInSegmentOperStatus (unresolved reference) |
Enumeration
up(1), down(2)
|
Only up(1) and down(2) need to be supported. | |
| mplsInSegmentStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
| mplsOutSegmentIfIndex | readonly | Write access is not required. | |
| mplsOutSegmentPushTopLabel | readonly | Write access is not required. | |
| mplsOutSegmentTopLabel | readonly | Write access is not required. | |
| mplsOutSegmentNextHopIpAddrType | readonly | ipV6(3) need not be supported. | |
| mplsOutSegmentNextHopIpv4Addr | readonly | Write access is not required. | |
| mplsOutSegmentNextHopIpv6Addr | readonly | Write access is not required. | |
| mplsOutSegmentAdminStatus (unresolved reference) | readonly |
Enumeration
up(1), down(2)
|
A value of testing(3) need not be supported. |
| mplsOutSegmentOperStatus (unresolved reference) |
Enumeration
up(1), down(2)
|
Only up(1) and down(2) need to be supported. | |
| mplsOutSegmentRowStatus | readonly |
active(1), notInService(2), createAndGo(4), destroy(6)
|
The notReady(3) and createAndWait(5) states need not be supported. |
| mplsOutSegmentStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
| mplsXCLabelStackIndex | readonly | Write access is not required. | |
| mplsXCIsPersistent | readonly | Write access is not required. | |
| mplsXCAdminStatus | readonly |
Enumeration
up(1), down(2)
|
A value of testing(3) need not be supported. |
| mplsXCOperStatus |
Enumeration
up(1), down(2)
|
Only up(1) and down(2) need to be supported. | |
| mplsXCRowStatus | readonly |
active(1), notInService(2), createAndGo(4), destroy(6)
|
The notReady(3) and createAndWait(5) states need not be supported. |
| mplsXCStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.3.96.2.0.1 |
This notification is generated when a
mplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsXCOperStatus. |
|
.1.3.6.1.3.96.2.0.2 |
This notification is generated when a
mplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsXCOperStatus. |