ATM-FORUM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
91

atmfPortTable

table mandatory
.1.3.6.1.4.1.353.2.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfPortTable' 
A table of physical layer status and parameter
information for the ATM Interface's physical interface.
atmfPortEntry row .1.3.6.1.4.1.353.2.1.1.1
An entry in the table, containing information about
the physical layer of an ATM Interface.
Indexes
Column Syntax OID
atmfPortIndexmandatory
The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.1.1.1.1
atmfPortAddressobsolete
This object should not be implemented except as
required for backward compatibility with version 2.0
of the UNI specification. The Address Group, defined
in theAddress Registration MIB should be used instead.
AtmAddress
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.353.2.1.1.1.2
atmfPortTransmissionTypeobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification. Appropriate Network Management
MIBs should be used instead.
ObjectIdentifier .1.3.6.1.4.1.353.2.1.1.1.3
atmfPortMediaTypeobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification. Appropriate Network Management
MIBs should be used instead.
ObjectIdentifier .1.3.6.1.4.1.353.2.1.1.1.4
atmfPortOperStatusobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification. Appropriate Network Management
MIBs should be used instead.
Enumeration
Enumerated Values:
1other
2inService
3outOfService
4loopBack
 .1.3.6.1.4.1.353.2.1.1.1.5
atmfPortSpecificobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification. Appropriate Network Management
MIBs should be used instead.
ObjectIdentifier .1.3.6.1.4.1.353.2.1.1.1.6
atmfPortMyIfNamemandatory
A textual name of this interface. If this system is
manageable through SNMP, and supports the object
ifName, the value of this object must be identical
with that of ifName for the ifEntry of the lowest
level physical in…
RFC1213-MIBDisplayString .1.3.6.1.4.1.353.2.1.1.1.7
atmfPortMyIfIdentifiermandatory
A unique value for each ATM interface. The scheme used to
number the ATM interfaces on an ATM device is
implementation specific. One way to generate this value is
to use the ifIndex that an SNMP manager would use to
ide…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.1.1.1.8

atmfAtmLayerTable

table mandatory
.1.3.6.1.4.1.353.2.2.1 · 1 row entry · 15 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfAtmLayerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfAtmLayerTable' 
A table of ATM layer status and parameter information
for the ATM Interface.
atmfAtmLayerEntry row .1.3.6.1.4.1.353.2.2.1.1
An entry in the table, containing information about
the ATM layer of an ATM Interface.
Indexes
Column Syntax OID
atmfAtmLayerIndexmandatory
The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.2.1.1.1
atmfAtmLayerMaxVPCsmandatory
The maximum number of switched and permanent VPCs
supported on this ATM Interface. For virtual interfaces
(i.e. Virtual Path Connections), the maximum number of VPCs
PNNI may communicate over is set to zero.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.353.2.2.1.1.2
atmfAtmLayerMaxVCCsmandatory
The maximum number of switched and permanent VCCs
supported on this ATM Interface.
Integer32
Constraints:
range: 0-268435456
 .1.3.6.1.4.1.353.2.2.1.1.3
atmfAtmLayerConfiguredVPCsmandatory
The number of permanent VPCs configured for use on
this ATM Interface. For virtual interfaces (i.e. Virtual Path
Connections used by PNNI), the maximum number of VPCs
is set to zero.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.353.2.2.1.1.4
atmfAtmLayerConfiguredVCCsmandatory
The number of permanent VCCs configured for use on
this ATM Interface.
Integer32
Constraints:
range: 0-268435456
 .1.3.6.1.4.1.353.2.2.1.1.5
atmfAtmLayerMaxVpiBitsmandatory
The maximum number of active VPI bits on this ATM Interface.
For virtual interfaces (i.e. Virtual Path Connections used by PNNI),
this value has no meaning and is set to zero.
Integer32
Constraints:
range: 0-12
 .1.3.6.1.4.1.353.2.2.1.1.6
atmfAtmLayerMaxVciBitsmandatory
The maximum number of active VCI bits on this ATM Interface.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.353.2.2.1.1.7
atmfAtmLayerUniTypemandatory
The type of the ATM device, either public or private.
Enumeration
Enumerated Values:
1public
2private
 .1.3.6.1.4.1.353.2.2.1.1.8
atmfAtmLayerUniVersionmandatory
An indication of the latest version of the ATM Forum UNI
Signalling Specification that is supported on this ATM
Interface. If this value is not present, a version of the UNI
earlier than 3.1 is supported.
…
Enumeration
Enumerated Values:
1version2point0
2version3point0
3version3point1
4version4point0
5unsupported
 .1.3.6.1.4.1.353.2.2.1.1.9
atmfAtmLayerDeviceTypemandatory
This object determines the type of the ATM device. This
object is used in automatic ATM Interface-Type determination
procedure such that a correct operational ATM
Interface-type can be determined. An ATM End System
shal…
Enumeration
Enumerated Values:
1user
2node
 .1.3.6.1.4.1.353.2.2.1.1.10
atmfAtmLayerIlmiVersionmandatory
An indication of the latest version of the ATM Forum
ILMI Specification that is supported on this ATM Interface.

If the peer IME's value of this object is the same as,
or later than the local IME's value,…
Enumeration
Enumerated Values:
1unsupported
2version4point0
 .1.3.6.1.4.1.353.2.2.1.1.11
atmfAtmLayerNniSigVersionmandatory
An indication of the latest version of the ATM Forum
PNNI Signalling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined through ILMI.

If the peer I…
Enumeration
Enumerated Values:
1unsupported
2iisp
3pnniVersion1point0
 .1.3.6.1.4.1.353.2.2.1.1.12
atmfAtmLayerMaxSvpcVpimandatory
The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual path connections.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.353.2.2.1.1.13
atmfAtmLayerMaxSvccVpimandatory
The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual channel connections.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.353.2.2.1.1.14
atmfAtmLayerMinSvccVcimandatory
This is the minimum VCI value that the
signalling stack is configured to support for
allocation to switched virtual channel connections. The same
value applies to all SVCC VPI values for which the
signalling stack is c…
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.353.2.2.1.1.15

atmfAtmStatsTable

table obsolete
.1.3.6.1.4.1.353.2.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfAtmStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfAtmStatsTable' 
This group is deprecated and should not be implemented
except as required for backward compatibility with version
3.1 of the UNI specification.
atmfAtmStatsEntry row .1.3.6.1.4.1.353.2.3.1.1
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Indexes
Column Syntax OID
atmfAtmStatsIndexobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.3.1.1.1
atmfAtmStatsReceivedCellsobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.2.3.1.1.2
atmfAtmStatsDroppedReceivedCellsobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.2.3.1.1.3
atmfAtmStatsTransmittedCellsobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.2.3.1.1.4

atmfVpcTable

table mandatory
.1.3.6.1.4.1.353.2.4.1 · 1 row entry · 20 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfVpcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfVpcTable' 
A table of status and parameter information on the
virtual path connections which cross this ATM
Interface. There is one entry in this table for each
permanent virtual path connection.
atmfVpcEntry row .1.3.6.1.4.1.353.2.4.1.1
An entry in the table, containing information about a
particular virtual path connection.
Indexes
Column Syntax OID
atmfVpcPortIndexmandatory
The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.1
atmfVpcVpimandatory
The VPI value of this Virtual Path Connection at the
local ATM Interface.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.2.4.1.1.2
atmfVpcOperStatusmandatory
The present actual operational status of the VPC.

A value of end2endUp(2) or end2endDown(3) would be
used if the end-to-end status is known. If only local
status information is available, a value of
local…
Enumeration
Enumerated Values:
1unknown
2end2endUp
3end2endDown
4localUpEnd2endUnknown
5localDown
 .1.3.6.1.4.1.353.2.4.1.1.3
atmfVpcTransmitTrafficDescriptorTypemandatory
The type of traffic management, applicable to the
transmit direction of this VPC. The type may indicate
none, or a type with one or more parameters. These
parameters are specified as a parameter vector, in the
correspon…
ObjectIdentifier .1.3.6.1.4.1.353.2.4.1.1.4
atmfVpcTransmitTrafficDescriptorParam1mandatory
The first parameter of the transmit parameter vector
for this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.5
atmfVpcTransmitTrafficDescriptorParam2mandatory
The second parameter of the transmit parameter vector
for this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.6
atmfVpcTransmitTrafficDescriptorParam3mandatory
The third parameter of the transmit parameter vector
for this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.7
atmfVpcTransmitTrafficDescriptorParam4mandatory
The fourth parameter of the transmit parameter vector
for this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.8
atmfVpcTransmitTrafficDescriptorParam5mandatory
The fifth parameter of the transmit parameter vector
for this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.9
atmfVpcReceiveTrafficDescriptorTypemandatory
The type of traffic management, applicable to the
traffic in the receive direction of this VPC. The type
may indicate none, or a type with one or more
parameters. These parameters are specified as a
parameter vector, in…
ObjectIdentifier .1.3.6.1.4.1.353.2.4.1.1.10
atmfVpcReceiveTrafficDescriptorParam1mandatory
The first parameter of the receive parameter vector
for this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.11
atmfVpcReceiveTrafficDescriptorParam2mandatory
The second parameter of the receive parameter vector
for this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.12
atmfVpcReceiveTrafficDescriptorParam3mandatory
The third parameter of the receive parameter vector
for this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.13
atmfVpcReceiveTrafficDescriptorParam4mandatory
The fourth parameter of the receive parameter vector
for this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.14
atmfVpcReceiveTrafficDescriptorParam5mandatory
The fifth parameter of the receive parameter vector
for this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.4.1.1.15
atmfVpcQoSCategoryobsolete
This object should not be implemented except as
required for backward compatibility with version 2.0
of the UNI specification.
Enumeration
Enumerated Values:
1other
2deterministic
3statistical
4unspecified
 .1.3.6.1.4.1.353.2.4.1.1.16
atmfVpcTransmitQoSClassobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.2.4.1.1.17
atmfVpcReceiveQoSClassobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.2.4.1.1.18
atmfVpcBestEffortIndicatormandatory
The object is examined when
atmfVpcTransmitTrafficDescriptorType or
atmfVpcReceiveTrafficDescriptorType for the associated
connection is equal to atmfNoClpNoScr.
If this object is set to false(2), the network is request…
ATM-FORUM-TC-MIBTruthValue
Type Values:
1true
2false
 .1.3.6.1.4.1.353.2.4.1.1.19
atmfVpcServiceCategorymandatory
The service category of this virtual path connection.
ATM-FORUM-TC-MIBAtmServiceCategory
Type Values:
1other
2cbr
3rtVbr
4nrtVbr
5abr
6ubr
 .1.3.6.1.4.1.353.2.4.1.1.20

atmfVccTable

table mandatory
.1.3.6.1.4.1.353.2.5.1 · 1 row entry · 23 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfVccTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfVccTable' 
A table of status and parameter information on the
virtual channel connections which are visible at this
ATM Interface. There is one entry in this table for
each permanent virtual channel connection, including
reserved VCCs that are supported; e.g., signalling,
OAM flows, and ILMI, but not unassigned cells.
atmfVccEntry row .1.3.6.1.4.1.353.2.5.1.1
An entry in the table, containing information about a
particular virtual channel connection.
Indexes
Column Syntax OID
atmfVccPortIndexmandatory
The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.1
atmfVccVpimandatory
The VPI value of this Virtual Channel Connection at
the local ATM Interface. For virtual interfaces (i.e.
Virtual Path Connections), this value has no meaning
and is set to zero
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.2.5.1.1.2
atmfVccVcimandatory
The VCI value of this Virtual Channel Connection at
the local ATM Interface.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.2.5.1.1.3
atmfVccOperStatusmandatory
The present actual operational status of the VCC. A
value of end2endUp(2) or end2endUp(3) is used if the
end to end status is known.

If only local status is known a value of
localUpEnd2endUnknown(4) or lo…
Enumeration
Enumerated Values:
1unknown
2end2endUp
3end2endDown
4localUpEnd2endUnknown
5localDown
 .1.3.6.1.4.1.353.2.5.1.1.4
atmfVccTransmitTrafficDescriptorTypemandatory
The type of traffic management, applicable to the
transmit direction of this VCC. The type may indicate
none, or a type with one or more parameters. These
parameters are specified as a parameter vector, in the
correspon…
ObjectIdentifier .1.3.6.1.4.1.353.2.5.1.1.5
atmfVccTransmitTrafficDescriptorParam1mandatory
The first parameter of the transmit parameter vector
for this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.6
atmfVccTransmitTrafficDescriptorParam2mandatory
The second parameter of the transmit parameter vector
for this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.7
atmfVccTransmitTrafficDescriptorParam3mandatory
The third parameter of the transmit parameter vector
for this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.8
atmfVccTransmitTrafficDescriptorParam4mandatory
The fourth parameter of the transmit parameter vector
for this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.9
atmfVccTransmitTrafficDescriptorParam5mandatory
The fifth parameter of the transmit parameter vector
for this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.10
atmfVccReceiveTrafficDescriptorTypemandatory
The type of traffic management, applicable to the
traffic in the receive direction of this VCC. The type
may indicate none, or a type with one or more
parameters. These parameters are specified as a
parameter vector, in…
ObjectIdentifier .1.3.6.1.4.1.353.2.5.1.1.11
atmfVccReceiveTrafficDescriptorParam1mandatory
The first parameter of the receive parameter vector
for this VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.12
atmfVccReceiveTrafficDescriptorParam2mandatory
The second parameter of the receive parameter vector
for this VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.13
atmfVccReceiveTrafficDescriptorParam3mandatory
The third parameter of the receive parameter vector
for this VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.14
atmfVccReceiveTrafficDescriptorParam4mandatory
The fourth parameter of the receive parameter vector
for this VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.15
atmfVccReceiveTrafficDescriptorParam5mandatory
The fifth parameter of the receive parameter vector
for this VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.5.1.1.16
atmfVccQoSCategoryobsolete
This object should not be implemented except as
required for backward compatibility with version 2.0
of the UNI specification.
Enumeration
Enumerated Values:
1other
2deterministic
3statistical
4unspecified
 .1.3.6.1.4.1.353.2.5.1.1.17
atmfVccTransmitQoSClassobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.2.5.1.1.18
atmfVccReceiveQoSClassobsolete
This object should not be implemented except as
required for backward compatibility with version 3.1
of the UNI specification.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.2.5.1.1.19
atmfVccBestEffortIndicatormandatory
The object is examined when
atmfVccTransmitTrafficDescriptorType or
atmfVccReceiveTrafficDescriptorType for the associated
connection is equal to atmfNoClpNoScr.
If this object is set to false(2), the network is request…
ATM-FORUM-TC-MIBTruthValue
Type Values:
1true
2false
 .1.3.6.1.4.1.353.2.5.1.1.20
atmfVccTransmitFrameDiscardmandatory
If set to true(1), this object indicates that the network
is requested to treat data for this connection (in the
transmit direction) as frames (e.g. AAL5 CPCS_PDU's) rather
than as individual cells. While the precise
i…
ATM-FORUM-TC-MIBTruthValue
Type Values:
1true
2false
 .1.3.6.1.4.1.353.2.5.1.1.21
atmfVccReceiveFrameDiscardmandatory
If set to true(1), this object indicates that the network
is requested to treat data for this connection (in the
receive direction) as frames (e.g. AAL5 CPCS_PDU's) rather
than as individual cells. While the precise
im…
ATM-FORUM-TC-MIBTruthValue
Type Values:
1true
2false
 .1.3.6.1.4.1.353.2.5.1.1.22
atmfVccServiceCategorymandatory
The service category of this virtual channel connection.
ATM-FORUM-TC-MIBAtmServiceCategory
Type Values:
1other
2cbr
3rtVbr
4nrtVbr
5abr
6ubr
 .1.3.6.1.4.1.353.2.5.1.1.23

atmfVpcAbrTable

table mandatory
.1.3.6.1.4.1.353.2.9.1 · 1 row entry · 10 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfVpcAbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfVpcAbrTable' 
A table of operational parameters related to the ABR
virtual path connections which cross this ATM
Interface. There is one entry in this table for each
ABR virtual path connection.
          
Each virtual path connection represented
in this table must also be represented by
an entry in the atmfVpcTable.
atmfVpcAbrEntry row .1.3.6.1.4.1.353.2.9.1.1
An entry in the table, containing information about a
particular ABR virtual path connection.
Indexes
Column Syntax OID
atmfVpcAbrPortIndexmandatory
The value of 0 which has the special meaning of identifying
the ATM Interface over which this message was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.9.1.1.1
atmfVpcAbrVpimandatory
The VPI value of this ABR Virtual Path Connection at the
local ATM Interface.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.2.9.1.1.2
atmfVpcAbrTransmitIcrmandatory
Initial Cell Rate: This is the rate at which the
source starts, both initially and after an idle period.
The unit is cells per second. The value must not be
larger than PCR, and is usually lower.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.353.2.9.1.1.3
atmfVpcAbrTransmitNrmmandatory
The maximum number of data cells a source may send
for each forward RM-cell. The default value is nrm32(5).
Enumeration
Enumerated Values:
1nrm2
2nrm4
3nrm8
4nrm16
5nrm32
6nrm64
7nrm128
8nrm256
 .1.3.6.1.4.1.353.2.9.1.1.4
atmfVpcAbrTransmitTrmmandatory
Upper bound on the time between forward RM-cells for
an active source (in milliseconds). The default value
is trm100(8).
Enumeration
Enumerated Values:
1trm0point78125
2trm1point5625
3trm3point125
4trm6point25
5trm12point5
6trm25
7trm50
8trm100
 .1.3.6.1.4.1.353.2.9.1.1.5
atmfVpcAbrTransmitCdfmandatory
Cutoff Decrease Factor: This field controls the rate
decrease associated with lost or delayed backward RM
cells. Larger values result in faster rate decrease.
The default value is cdfOneOver16(4).
Enumeration
Enumerated Values:
1cdf0
2cdfOneOver64
3cdfOneOver32
4cdfOneOver16
5cdfOneOver8
6cdfOneOver4
7cdfOneOver2
8cdfOne
 .1.3.6.1.4.1.353.2.9.1.1.6
atmfVpcAbrTransmitRifmandatory
Rate Increment Factor: Controls the rate at which the rate
increases, when a backward RM-cell is received with CI=0 and
NI=0. Larger values lead to faster rate increase. The default
value is rifOneOver16(12).
Enumeration
Enumerated Values:
1rifOneOver32768
2rifOneOver16384
3rifOneOver8192
4rifOneOver4096
5rifOneOver2048
6rifOneOver1024
7rifOneOver512
8rifOneOver256
9rifOneOver128
10rifOneOver64
11rifOneOver32
12rifOneOver16
13rifOneOver8
14rifOneOver4
15rifOneOver2
16rifOne
 .1.3.6.1.4.1.353.2.9.1.1.7
atmfVpcAbrTransmitRdfmandatory
Rate Decrease Factor: Controls the rate decrease
which occurs when backward RM-cells with CI=1, are
received. Larger values lead to faster rate
decrease. The default value is rdfOneOver16(12).
Enumeration
Enumerated Values:
1rdfOneOver32768
2rdfOneOver16384
3rdfOneOver8192
4rdfOneOver4096
5rdfOneOver2048
6rdfOneOver1024
7rdfOneOver512
8rdfOneOver256
9rdfOneOver128
10rdfOneOver64
11rdfOneOver32
12rdfOneOver16
13rdfOneOver8
14rdfOneOver4
15rdfOneOver2
16rdfOne
 .1.3.6.1.4.1.353.2.9.1.1.8
atmfVpcAbrTransmitAdtfmandatory
ACR Decrease Time Factor: Time permitted between
sending RM-cells, before the allowed rate (ACR) is
decreased to ICR. Range is 10 ms to 10.23 seconds.
The unit is 10 milliseconds. For example, the default
value of 50 …
Integer32
Constraints:
range: 1-1023
 .1.3.6.1.4.1.353.2.9.1.1.9
atmfVpcAbrTransmitCrmmandatory
RM Cells Before Cutoff: Limits the number of forward
RM-cells which may be sent in the absence of received
backward RM-cells.
Integer32
Constraints:
range: 0-8388608
 .1.3.6.1.4.1.353.2.9.1.1.10

atmfVccAbrTable

table mandatory
.1.3.6.1.4.1.353.2.10.1 · 1 row entry · 11 columns
Open in standard view
Uses the broadbandforum variant from /opt/observium/mibs/broadbandforum.
Command help
Walk atmfVccAbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-MIB::atmfVccAbrTable' 
A table of operational parameters related to the ABR
virtual channel connections which cross this ATM
Interface. There is one entry in this table for each
ABR virtual channel connection.
          
Each virtual channel connection represented
in this table must also be represented by
an entry in the atmfVccTable.
atmfVccAbrEntry row .1.3.6.1.4.1.353.2.10.1.1
An entry in the table, containing information about a
particular ABR virtual channel connection.
Indexes
Column Syntax OID
atmfVccAbrPortIndexmandatory
The value of 0 which has the special meaning of identifying
the ATM Interface over which this message was received.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.2.10.1.1.1
atmfVccAbrVpimandatory
The VPI value of this ABR Virtual Channel Connection at the
local ATM Interface. For virtual interfaces (i.e. Virtual Path
Connections), this value has no meaning and is set to zero
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.2.10.1.1.2
atmfVccAbrVcimandatory
The VCI value of this ABR Virtual Channel Connection at the
local ATM Interface.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.2.10.1.1.3
atmfVccAbrTransmitIcrmandatory
Initial Cell Rate: This is the rate at which the
source starts, both initially and after an idle period.
The unit is cells per second. The value must not be
larger than PCR, and is usually lower.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.353.2.10.1.1.4
atmfVccAbrTransmitNrmmandatory
The maximum number of data cells a source may send
for each forward RM-cell. The default value is nrm32(5).
Enumeration
Enumerated Values:
1nrm2
2nrm4
3nrm8
4nrm16
5nrm32
6nrm64
7nrm128
8nrm256
 .1.3.6.1.4.1.353.2.10.1.1.5
atmfVccAbrTransmitTrmmandatory
Upper bound on the time between forward RM-cells for
an active source (in milliseconds). The default value
is trm100(8).
Enumeration
Enumerated Values:
1trm0point78125
2trm1point5625
3trm3point125
4trm6point25
5trm12point5
6trm25
7trm50
8trm100
 .1.3.6.1.4.1.353.2.10.1.1.6
atmfVccAbrTransmitCdfmandatory
Cutoff Decrease Factor: This field controls the rate
decrease associated with lost or delayed backward RM
cells. Larger values result in faster rate decrease.
The default value is cdfOneOver16(4).
Enumeration
Enumerated Values:
1cdf0
2cdfOneOver64
3cdfOneOver32
4cdfOneOver16
5cdfOneOver8
6cdfOneOver4
7cdfOneOver2
8cdfOne
 .1.3.6.1.4.1.353.2.10.1.1.7
atmfVccAbrTransmitRifmandatory
Rate Increment Factor: Controls the rate at which the rate
increases, when a backward RM-cell is received with CI=0 and
NI=0. Larger values lead to faster rate increase. The default
value is rifOneOver16(12).
Enumeration
Enumerated Values:
1rifOneOver32768
2rifOneOver16384
3rifOneOver8192
4rifOneOver4096
5rifOneOver2048
6rifOneOver1024
7rifOneOver512
8rifOneOver256
9rifOneOver128
10rifOneOver64
11rifOneOver32
12rifOneOver16
13rifOneOver8
14rifOneOver4
15rifOneOver2
16rifOne
 .1.3.6.1.4.1.353.2.10.1.1.8
atmfVccAbrTransmitRdfmandatory
Rate Decrease Factor: Controls the rate decrease
which occurs when backward RM-cells with CI=1, are
received. Larger values lead to faster rate
decrease. The default value is rdfOneOver16(12).
Enumeration
Enumerated Values:
1rdfOneOver32768
2rdfOneOver16384
3rdfOneOver8192
4rdfOneOver4096
5rdfOneOver2048
6rdfOneOver1024
7rdfOneOver512
8rdfOneOver256
9rdfOneOver128
10rdfOneOver64
11rdfOneOver32
12rdfOneOver16
13rdfOneOver8
14rdfOneOver4
15rdfOneOver2
16rdfOne
 .1.3.6.1.4.1.353.2.10.1.1.9
atmfVccAbrTransmitAdtfmandatory
ACR Decrease Time Factor: Time permitted between
sending RM-cells, before the allowed rate (ACR) is
decreased to ICR. Range is 10 ms to 10.23 seconds.
The unit is 10 milliseconds. For example, the default
value of 50 …
Integer32
Constraints:
range: 1-1023
 .1.3.6.1.4.1.353.2.10.1.1.10
atmfVccAbrTransmitCrmmandatory
RM Cells Before Cutoff: Limits the number of forward
RM-cells which may be sent in the absence of received
backward RM-cells.
Integer32
Constraints:
range: 0-8388608
 .1.3.6.1.4.1.353.2.10.1.1.11