AC-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
193

acNetworkIPTable

table obsolete
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acNetworkIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acNetworkIPTable' 
IP control table. Enables to add, remove or configure the device's networks.
acNetworkIPEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1
Indexes
Column Syntax OID
acNetworkIPIndexobsolete
The row's index.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1oam
2media
3control
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1
acNetworkIPIfIndexobsolete
The row's index in the IF MIB.
The IF MIB is not yet supported and so for now this is the
same as the ipCidrRouteIfIndex object.
0 = OAM
1 = Media
2 = Control.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2
acNetworkIPLocalIPAddressobsolete
Sets the IP address of the OAM (Operation, Administration &
Management) when operating in multiple IPs mode.

Range: Legal IP address
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3
acNetworkIPLocalSubnetMaskobsolete
Sets the Subnet Mask for the OAM interface, when operating in
multiple IPs mode.

Range: Legal Subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4
acNetworkIPLocalDefGWobsolete
Sets the Default gateway for the OAM interface when operating
in multiple IPs mode.

Range: Legal IP address in subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5
acNetworkIPAdminStateobsolete
Determines if a row is currentely active or not.
Lock(1) - the row is in configuration (non active) state.
UnLock(2) - row is in active state.
Access: Online.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1lock
2unLock
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6

acSysInterfaceTable

table
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysInterfaceTable' 
Multiple Interfaces' Interface Table
acSysInterfaceEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1
Indexes
Column Syntax OID
acSysInterfaceIndex
Index Field for line.
AC INI-Param: InterfaceTable_Index
Unsigned32
Constraints:
range: 0-15
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1
acSysInterfaceRowStatus
ROWSTATUS Field for line.
AC INI-Param: InterfaceTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2
acSysInterfaceAction
Mangement Field for ACTIONS.
AC INI-Param: InterfaceTable_Action
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3
acSysInterfaceActionRes
Mangement Field for ACTIONS RESULT.
AC INI-Param: InterfaceTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4
acSysInterfaceApplicationTypes
The type assigned to the interface.
Access: Offline.
AC INI-Param: InterfaceTable_ApplicationTypes
Enumerationr/w
Enumerated Values:
0oam
1media
2control
3oamAndMedia
4oamAndControl
5mediaAndControl
6oamAndMediaAndControl
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5
acSysInterfaceMode
Interface configuration mode.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceMode
Enumerationr/w
Enumerated Values:
3iPv6PrefixManual
4iPv6Manual
10iPv4Manual
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6
acSysInterfaceIPAddress
IP Address (can be either IPv4 or IPv6) for this interface.
Access: Online.
AC INI-Param: InterfaceTable_IPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7
acSysInterfacePrefixLength
The number of ?1? bits in this interface?s netmask.
Access: Offline.
AC INI-Param: InterfaceTable_PrefixLength
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8
acSysInterfaceGateway
Default Gateway. Filled in one row only. 0 in others.
Access: Offline.
AC INI-Param: InterfaceTable_Gateway
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9
acSysInterfaceVlanID
VLAN ID of this interface.
Access: Offline.
AC INI-Param: InterfaceTable_VlanID
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10
acSysInterfaceName
a 16 character string of this interface?s name.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11

acSysWEBACLTable

table
.1.3.6.1.4.1.5003.9.10.10.1.3.4.21 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysWEBACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysWEBACLTable' 
Access control list for the WEB.
acSysWEBACLEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1
Indexes
Column Syntax OID
acSysWEBACLIndex
WEB ACL (Access Control List) index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-9
 .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1
acSysWEBACLIP
Allows IP addresses to connect to the Web interface. Set to
zeroes to allow all IP addresses.
Range: Valid IP address
.
Access: Instant.
AC INI-Param: WEBACCESSLIST
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2

acSysWEBAccessTable

table
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysWEBAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysWEBAccessTable'
acSysWEBAccessEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1
Indexes
Column Syntax OID
acSysWEBAccessRowStatus
WEB Basic row-status.
AC INI-Param: WEBAccessRowStatus
Unsigned32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1
acSysWEBAccessAction
WEB Access action.
AC INI-Param: WEBAccessAction
Unsigned32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2
acSysWEBAccessActionResult
WEB Access action result.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-0
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3
acSysWEBAccessIndex
WEB Access index.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0administrator
1monitoringLevel
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4
acSysWEBAccessUserName
WEB Basic user name. Range = String[26].
Access: Instant.
AC INI-Param: WEBAccessUserName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5
acSysWEBAccessUserCode
WEB Basic userAccess.
Access: Instant.
AC INI-Param: WEBAccessUserCode
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6
acSysWEBAccessWebAuthMode
Selects HTTP basic (clear text) or digest (MD5) authentication
for the web interface.
When set to 0, basic authentication (clear text) will be used.
When set to 1, digest authentication (MD5) will be used.
When set to 2…
Enumerationr/w
Enumerated Values:
0basicMode
1digestModeWhenPossible
2digestModeHTTPOnly
 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7

acSysVlanMapTable

table
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysVlanMapTable'
acSysVlanMapEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1
Indexes
Column Syntax OID
acSysVlanMapIndex
Index Field for line. Internal parameter.
AC INI-Param: DiffServToVlanPriority_Index
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1
acSysVlanMapRowStatus
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2
acSysVlanMapAction
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3
acSysVlanMapActionRes
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4
acSysVlanMapDiffServ
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_DiffServ
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5
acSysVlanMapVlanPriority
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_VlanPriority
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6

acSysIKEPolicyTable

table deprecated
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1 · 1 row entry · 20 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysIKEPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIKEPolicyTable'
acSysIKEPolicyEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1
Indexes
Column Syntax OID
acSysIKEPolicyIndexdeprecated
This parameter is used for the Internet Key Encryption (IKE)
Index Field for line. Internal parameter.
AC INI-Param: IKE_DB_INDEX
Unsigned32
Constraints:
range: 0-19
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1
acSysIKEPolicyRowStatusdeprecated
This parameter is used for the Internet Key Encryption (IKE)
ROWSTATUS Field for line. Internal parameter.
AC INI-Param: IKE_DB_ROWSTATUS
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2
acSysIKEPolicyActiondeprecated
This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: IKE_DB_ACTION
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3
acSysIKEPolicyActionResdeprecated
This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: IKE_DB_ACTION_RESULT
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4
acSysIKEPolicyShardKeydeprecated
IKE Policy - Shared Key.
Access: Instant.
AC INI-Param: IKEPOLICYSHAREDKEY
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5
acSysIKEPolicyLifeInSecondsdeprecated
IKE Policy - IKE SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINSEC
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6
acSysIKEPolicyLifeInKBdeprecated
IKE Policy - IKE SA LifeTime in KB.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINKB
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7
acSysIKEPolicyProposal0Encryptiondeprecated
IKE Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8
acSysIKEPolicyProposal1Encryptiondeprecated
IKE Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9
acSysIKEPolicyProposal2Encryptiondeprecated
IKE Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10
acSysIKEPolicyProposal3Encryptiondeprecated
IKE Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11
acSysIKEPolicyProposal0Authenticationdeprecated
IKE Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12
acSysIKEPolicyProposal1Authenticationdeprecated
IKE Policy - Proposal 1 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13
acSysIKEPolicyProposal2Authenticationdeprecated
IKE Policy - Proposal 2 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14
acSysIKEPolicyProposal3Authenticationdeprecated
IKE Policy - Proposal 3 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15
acSysIKEPolicyProposal0DHGroupdeprecated
IKE Policy - Proposal 0 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16
acSysIKEPolicyProposal1DHGroupdeprecated
IKE Policy - Proposal 1 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17
acSysIKEPolicyProposal2DHGroupdeprecated
IKE Policy - Proposal 2 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18
acSysIKEPolicyProposal3DHGroupdeprecated
IKE Policy - Proposal 3 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19
acSysIKEPolicyAuthenticationMethoddeprecated
This parameter is used for Internet Key Encryption (IKE) Policy
- IKE Authentication Method (Preshared key/ RSA).
Access: Offline.
AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD
Enumerationr/w
Enumerated Values:
0presharedKey
1rsaSignature
 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20

acSysIPSecSPDTable

table deprecated
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21 · 1 row entry · 24 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysIPSecSPDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPSecSPDTable'
acSysIPSecSPDEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1
Indexes
Column Syntax OID
acSysIPSecSPDIndexdeprecated
Security Policy Database (SPD) Index Field for line. Internal
parameter.
AC INI-Param: SPD_INDEX
Unsigned32
Constraints:
range: 0-19
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1
acSysIPSecSPDRowStatusdeprecated
Security Policy Database (SPD) ROWSTATUS field for line. Internal
parameter.
AC INI-Param: SPD_ROWSTATUS
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2
acSysIPSecSPDActiondeprecated
Security Policy Database (SPD) Mangement Field for ACTIONS.
Internal parameter.
AC INI-Param: SPD_ACTION
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3
acSysIPSecSPDActionResdeprecated
Security Policy Database (SPD) Mangement Field for ACTIONS RESULT.
Internal parameter.
AC INI-Param: SPD_ACTION_RESULT
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4
acSysIPSecSPDPolicyRemoteIPAddrdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Remote IP address as IP or Host Name.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTEIPADDRESS
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5
acSysIPSecSPDPolicySrcPortdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Source Port.
Access: Instant.
AC INI-Param: IPSECPOLICYSRCPORT
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6
acSysIPSecSPDPolicyDestPortdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Destination Port.
Access: Instant.
AC INI-Param: IPSECPOLICYDSTPORT
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7
acSysIPSecSPDPolicyProtocoldeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Protocol.
Access: Instant.
AC INI-Param: IPSECPOLICYPROTOCOL
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8
acSysIPSecSPDKeyExchangeMethodIndexdeprecated
This parameter is used for the Secure Internet Protocol (IPsec)
Policy - Index into the Key Exchange Method Table (IKE Table).
Access: Offline.
AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9
acSysIPSecSPDLifeInSecondsdeprecated
IPsec Policy - IPSec SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINSEC
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10
acSysIPSecSPDLifeInKBdeprecated
IPsec Policy - IPSec SA LifeTime in KB.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINKB
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11
acSysIPSecSPDProposal0Encryptiondeprecated
IPsec Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12
acSysIPSecSPDProposal1Encryptiondeprecated
IPsec Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13
acSysIPSecSPDProposal2Encryptiondeprecated
IPsec Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14
acSysIPSecSPDProposal3Encryptiondeprecated
IPsec Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15
acSysIPSecSPDProposal0Authenticationdeprecated
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16
acSysIPSecSPDProposal1Authenticationdeprecated
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17
acSysIPSecSPDProposal2Authenticationdeprecated
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18
acSysIPSecSPDProposal3Authenticationdeprecated
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19
acSysIPSecSPDPolicyLocalIPAddrTypedeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Local IP address type (OAM/Control).
Access: Offline.
AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE
Enumerationr/w
Enumerated Values:
0oam
2control
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20
acSysIPSecSPDModedeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Mode of Operation (Transport/Tunneling). '0' - Transport
'1' - Tunneling.
Access: Instant.
AC INI-Param: IPSECMODE
Enumerationr/w
Enumerated Values:
0transport
1tunneling
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21
acSysIPSecSPDPolicyRemoteTunnelIPAddressdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22
acSysIPSecSPDPolicyLocalTunnelIPAddressdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23
acSysIPSecSPDPolicyRemoteTunnelSubnetMaskdeprecated
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Subnet Mask of the Remote IPSec Address.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTESUBNETMASK
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24

acSysIPsecProposalTable

table
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22 · 1 row entry · 7 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysIPsecProposalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPsecProposalTable' 
IPsec Proposal table
acSysIPsecProposalEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1
Indexes
Column Syntax OID
acSysIPsecProposalIndex
Index Field for line.
AC INI-Param: IPsecProposalTable_Index
Unsigned32
Constraints:
range: 0-4
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1
acSysIPsecProposalRowStatus
ROWSTATUS Field for line.
AC INI-Param: IPsecProposalTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2
acSysIPsecProposalAction
Mangement Field for ACTIONS.
AC INI-Param: IPsecProposalTable_Action
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3
acSysIPsecProposalActionRes
Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecProposalTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4
acSysIPsecProposalEncryptionAlgorithm
Selects the encryption (privacy) algorithm to use.
Access: Online.
AC INI-Param: IPsecProposalTable_EncryptionAlgorithm
Enumerationr/w
Enumerated Values:
0none
1desCbc
2tripleDesCbc
3aes
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5
acSysIPsecProposalAuthenticationAlgorithm
Selects the message authentication (integrity) algorithm to
use.
Access: Online.
AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm
Enumerationr/w
Enumerated Values:
0none
2hmacSha1-96
4hmacMd5-96
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6
acSysIPsecProposalDiffieHellmanGroup
Selects the Diffie-Hellman group to use.
Access: Online.
AC INI-Param: IPsecProposalTable_DHGroup
Enumerationr/w
Enumerated Values:
0group1-768Bits
1group2-1024Bits
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7

acSysIPsecSATable

table
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23 · 1 row entry · 18 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysIPsecSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPsecSATable' 
IPsec SA table
acSysIPsecSAEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1
Indexes
Column Syntax OID
acSysIPsecSAIndex
Index Field for line.
AC INI-Param: IPsecSATable_Index
Unsigned32
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1
acSysIPsecSARowStatus
ROWSTATUS Field for line.
AC INI-Param: IPsecSATable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2
acSysIPsecSAAction
Mangement Field for ACTIONS.
AC INI-Param: IPsecSATable_Action
Unsigned32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3
acSysIPsecSAActionRes
Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecSATable_ActionRes
Unsigned32
Constraints:
range: 0-0
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4
acSysIPsecSARemoteEndpointAddress
IP address or DNS host name of the peer.
Access: Online.
AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-98
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5
acSysIPsecSAAuthenticationMethod
Selects the method used for peer authentication during IKE main
mode.
Access: Online.
AC INI-Param: IPsecSATable_AuthenticationMethod
Enumerationr/w
Enumerated Values:
0presharedKey
1rSASignature
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6
acSysIPsecSASharedKey
Defines the pre-shared key (in textual format).
Access: Online.
AC INI-Param: IPsecSATable_SharedKey
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7
acSysIPsecSASourcePort
Defines the source port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_SourcePort
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8
acSysIPsecSADestPort
Defines the destination port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_DestPort
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9
acSysIPsecSAProtocol
Defines the protocol type to which this configuration applies.
Standard IP protocol numbers should be used, e.g.:
0 = Any protocol (default)
17 = UDP
6 = TCP
.
Access: Online.
AC INI-Param: IPsecSATable_Protocol
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10
acSysIPsecSAPhase1SaLifetimeInSec
Determines the duration (in seconds) for which the negotiated
IKE SA (main mode) is valid. After the time expires, the SA
is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11
acSysIPsecSAPhase2SaLifetimeInSec
Determines the duration (in seconds) for which the negotiated
IPSec SA (quick mode) is valid. After the time expires, the
SA is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12
acSysIPsecSAPhase2SaLifetimeInKB
Determines the maximum volume of traffic (in kilobytes) for
which the negotiated IPSec SA (quick mode) is valid.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13
acSysIPsecSADPDmode
Controls dead peer detection (DPD) as per RFC 3706.
Access: Online.
AC INI-Param: IPsecSATable_DPDmode
Enumerationr/w
Enumerated Values:
0dPDDisabled
1dPDPeriodic
2dPDOnDemand
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14
acSysIPsecSAIPsecMode
Selects the IPSec mode of operation.
0 = Transport mode (default)
1 = Tunnel mode
.
Access: Online.
AC INI-Param: IPsecSATable_IPsecMode
Enumerationr/w
Enumerated Values:
0transport
1tunnel
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15
acSysIPsecSARemoteTunnelAddress
IP address of the peer router.
Access: Online.
AC INI-Param: IPsecSATable_RemoteTunnelAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16
acSysIPsecSARemoteSubnetIPAddress
IP address of the remote subnetwork.
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetIPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17
acSysIPsecSARemoteSubnetPrefixLength
Prefix length of the Remote Subnet IP Address parameter (in
bits).
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18

acSysAccessListTable

table
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1 · 1 row entry · 14 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysAccessListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysAccessListTable'
acSysAccessListEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1
Indexes
Column Syntax OID
acSysAccessListIndex
Index Field for line. Internal parameter.
AC INI-Param: ACCESSLIST_Index
Unsigned32
Constraints:
range: 1-50
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1
acSysAccessListRowStatus
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2
acSysAccessListAction
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3
acSysAccessListActionRes
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4
acSysAccessListSourceIP
Source IP for access rule.
Access: Online.
AC INI-Param: ACCESSLIST_Source_IP
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5
acSysAccessListNetMask
Mask for this access rule (bitwise ANDed with the source IP
of the packet).
Access: Online.
AC INI-Param: ACCESSLIST_Net_Mask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6
acSysAccessListStartPort
Port range - start.
Access: Online.
AC INI-Param: ACCESSLIST_Start_Port
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7
acSysAccessListEndPort
Port range - end.
Access: Online.
AC INI-Param: ACCESSLIST_End_Port
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8
acSysAccessListProtocol
IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP,
ANY or numeric value).
Access: Online.
AC INI-Param: ACCESSLIST_Protocol
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9
acSysAccessListPacketSize
Maximum packet size (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Packet_Size
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10
acSysAccessListByteRate
Allowed traffic in bytes per second (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Rate
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11
acSysAccessListByteBurst
Allowed traffic burst in bytes (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Burst
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12
acSysAccessListAllowType
Allow or block traffic matching this rule.
Access: Online.
AC INI-Param: ACCESSLIST_Allow_Type
Enumerationr/w
Enumerated Values:
0notSet
1allow
2block
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13
acSysAccessListMatchCount
Statistics: number of matched packets.
AC INI-Param: ACCESSLIST_MatchCount
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14

acSysNFSTable

table
.1.3.6.1.4.1.5003.9.10.10.1.11.21 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysNFSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNFSTable'
acSysNFSEntry row .1.3.6.1.4.1.5003.9.10.10.1.11.21.1
Indexes
Column Syntax OID
acSysNFSIndex
Index Field for line. Internal parameter.
AC INI-Param: NFSServers_Index
Unsigned32
Constraints:
range: 0-15
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1
acSysNFSRowStatus
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2
acSysNFSAction
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3
acSysNFSActionRes
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4
acSysNFSHostOrIP
The domain name or IP address of the NFS server. If a domain
name is provided, then a DNS server must be configured.
Access: Online.
AC INI-Param: NFSServers_HostOrIP
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5
acSysNFSRootPath
Path to the root of the exported file system.
Access: Online.
AC INI-Param: NFSServers_RootPath
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6
acSysNFSNfsVersion
NFS version to use with this remote file system, 2 or 3 (default).
Access: Online.
AC INI-Param: NFSServers_NfsVersion
Enumerationr/w
Enumerated Values:
2v2
3v3
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7
acSysNFSAuthType
Identifies the authentication method used with this remote file
system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default).
Access: Online.
AC INI-Param: NFSServers_AuthType
Enumerationr/w
Enumerated Values:
0null
1unix
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8
acSysNFSUID
User ID used in authentication if using AUTH_UNIX. The default
is 0.
Access: Online.
AC INI-Param: NFSServers_UID
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9
acSysNFSGID
Group ID used in authentication if using AUTH_UNIX. The default
is 1.
Access: Online.
AC INI-Param: NFSServers_GID
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10
acSysNFSVlanType
The VLAN, OAM(0) or Media(1), to use when accessing this remote
file system. The default is to use
the media VLAN. This parameters applies only if multiple IP
addresses are configured on this board.
Access: Online.
AC I…
Enumerationr/w
Enumerated Values:
0oam
1media
 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11

acSysEthernetStatusTable

table
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysEthernetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysEthernetStatusTable' 
Ethernet relevant information
acSysEthernetStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1
Indexes
Column Syntax OID
acSysEthernetStatusIndex
The row's index.
On 8410 Systems:
Index 1 ? related to GBE port no.1 in the TER (Media).
Index 2 ? related to GBE port no.2 in the TER (Media).
Index 3 ? related to port 1A in PEM #1 (Control).
Index 4 ? related to port…
Unsigned32
Constraints:
range: 0-12
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1
acSysEthernetStatusPortDuplexMode
full-duplex or half-duplex connection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0halfDuplex
1fullDuplex
2forceModeValue
3notAvailable
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2
acSysEthernetStatusPortSpeed
port speed.
AC INI-Param: N/A
Enumeration
Enumerated Values:
2forceModeValue
3notAvailable
10ac10Mbps
100ac100Mbps
1000ac1000Mbps
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3
acSysEthernetStatusActivePortNumber
Status of ethernet port - active or not active.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notActive
1active
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4
acSysEthernetStatusPortState
Port State.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disabled
1blocking
2learning
3forwarding
10notApplicable
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5
acSysEthernetStatusPowerOverEthernet
Power over Ethernet interface status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notApplicable
1active
2notActive
 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6

acSysInterfaceStatusTable

table
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21 · 1 row entry · 9 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysInterfaceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysInterfaceStatusTable'
acSysInterfaceStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1
Indexes
Column Syntax OID
acSysInterfaceStatusEntryIndex
Related Interface index in the interface configuration table
(in case the table is empty - meaning there is only single
IP the index will appear with 0).
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-15
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1
acSysInterfaceStatusTypeIndex
1 - IP Address.
2 - IPv6 Link-Local Address.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2
acSysInterfaceStatusApplicationTypes
The type assigned to the interface.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0oam
1media
2control
3oamAndMedia
4oamAndControl
5mediaAndControl
6oamAndMediaAndControl
11data
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3
acSysInterfaceStatusMode
Interface configuration mode.
AC INI-Param: N/A
Enumeration
Enumerated Values:
3iPv6PrefixManual
4iPv6Manual
10iPv4Manual
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4
acSysInterfaceStatusIPAddress
IP Address (can be either IPv4 or IPv6) for this interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5
acSysInterfaceStatusPrefixLength
The number of ?1? bits in this interface?s netmask.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6
acSysInterfaceStatusGateway
Default Gateway.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7
acSysInterfaceStatusVlanID
VLAN ID of this interface.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8
acSysInterfaceStatusName
16 character string of this interface?s name.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-16
 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9

acSysModuleTable

table
.1.3.6.1.4.1.5003.9.10.10.4.21 · 1 row entry · 16 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysModuleTable'
acSysModuleEntry row .1.3.6.1.4.1.5003.9.10.10.4.21.1
Indexes
Column Syntax OID
acSysModuleIndex
The Module number in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.1
acSysModuleGeographicalPosition
The slot number in the chassis. 1 being the bottom slot and
so on.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.2
acSysModuleType
The module's type.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0acUnknown
1acTrunkPack-08
2acMediaPack-108
3acMediaPack-124
20acTrunkPack-1600
22acTPM1100
23acTrunkPack-260-IpMedia
24acTrunkPack-1610
25acMediaPack-104
26acMediaPack-102
29acTrunkPack-1610-SB
30acTrunkPack-1610-IpMedia
31acTrunkPack-MEDIANT2000
32acTrunkPack-STRETTO2000
33acTrunkPack-IPMServer2000
34acTrunkPack-2810
35acTrunkPack-260-UN-IpMedia
36acTrunkPack-260-IpMedia-30Ch
37acTrunkPack-260-IpMedia-60Ch
38acTrunkPack-260-IpMedia-120Ch
39acTrunkPack-260RT-IpMedia-30Ch
40acTrunkPack-260RT-IpMedia-60Ch
41acTrunkPack-260RT-IpMedia-120Ch
42acTrunkPack-260
43acTrunkPack-260-UN
44acTPM1100-PCM
45acTrunkPack-6310
46acTPM6300
47acMediant1000
48acIPMedia3000
49acMediant3000
50acStretto3000
51acTrunkPack-6310-IpMedia
52acTrunkPack-6310-SB
53acATP-1610
54acATP-260
55acATP-260-UN
56acMediaPack-118
57acMediaPack114
58acMediaPack112
59acTrunkPack-6310-T3
60acMediant3000-T3
61acIPmedia3000-T3
62acTrunkPack-6310-T3-IpMedia
63acTrunkPack-8410
64acTrunkPack-8410-IpMedia
69acMediaPack-500-MSBG
250sA1
251sA2
252sA3
253acMediant1000CPUmodule
254acMediant1000IFDigitalModule
255acMediant1000IFAnalogModule
256acMediant1000IFBRIModule
257acMediant1000IPMediaModule
258acMediant600CPUmodule
259acMediant600IFDigitalModule
260acMediant600IFAnalogModule
261acMediant600IFBRIModule
262acMediant600IPMediaModule
265acMediaPack500CPUmodule
266acMediaPack500IFDigitalModule
267acMediaPack500IFAnalogModule
268acMediaPack500IFBRIModule
269acMediaPack500IFWANModule
270acMediaPack500IFWiFiModule
271acMediaPack500IPMediaModule
272acMediaPack500EthernetModule
273acMediaPack500IFT1WANModule
274acMediaPack500IFSHDSLModule
275acMediaPack500IFADSLModule
276acMediant1000IFWANModule
277acMediant1000IFT1WANModule
278acMediant1000IFSHDSLModule
279acMediant1000IFADSLModule
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.3
acSysModulePresence
Is the module present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.4
acSysModuleLicenseKeyList
List of active features as enabled by the license key. SA modules
return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-1400
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.5
acSysModuleSerialNumber
The module's serial number.
For 6310 the serial number is the decimal form of the last
5 characters in the MAC Address.
SA modules return 0.
When the modules in the table are unavailable for audit (no
HA) (-1) is return…
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.6
acSysModuleSWVersion
The version of the SW being run in the module placed .
SA Modules return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.7
acSysModuleOperationalState
The operational state of the module. Determined internally by
the system.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.8
acSysModuleHAStatus
Modules status with in the system. Designed to define the HA
state.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1acitveNonHA
2active
3redundant
4standAlone
5redundantNonHA
6notApplicable
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.9
acSysModuleLEDs
Bit Field for the LEDs on the front of the module.
LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
3 MSB are the color -
0 - none
1- Green
2 - Red
3 - Yellow
4 - Orange
5 - Blue
7 - Gray (unknown).
AC INI…
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.10
acSysModuleTemperature
Temperature of the board in degrees Celsius. SA Modules return
0.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.11
acSysModuleActions
Actions to be performed by the module.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1reset
2switchOver
3actionDone
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.12
acSysModuleFRUaction
Field Replace Unit actions
Relevant to IF-Module only.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1fruActionDone
2fruOutOfServiceAction
3fruBackToServiceAction
4fruNotApplicable
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.13
acSysModuleFRUstatus
Field Replace Unit module's status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1moduleNotExist
2moduleExistOk
3moduleOutOfService
4moduleBackToServiceStart
5moduleMismatch
6moduleFaulty
7notApplicable
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.14
acSysModuleNumOfPorts
The number of physical interfaces in a module, analog or digital.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.15
acSysModuleFirstPortNum
The logical number as seen in the general trunk/analog-channel
table of the first port in the module in question.
Since analog and digital ports can be operational at once,
analog and digital ports may have same logical…
Unsigned32
Constraints:
range: 0-19
 .1.3.6.1.4.1.5003.9.10.10.4.21.1.16

acSysFanTrayTable

table
.1.3.6.1.4.1.5003.9.10.10.4.22 · 1 row entry · 9 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysFanTrayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysFanTrayTable'
acSysFanTrayEntry row .1.3.6.1.4.1.5003.9.10.10.4.22.1
Indexes
Column Syntax OID
acSysFanTrayIndex
Fan-Tray's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.1
acSysFanTrayGeographicalPosition
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.2
acSysFanTrayExistence
Is the Fan-Tray present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.3
acSysFanTrayType
The type of the Fan-Tray .
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-50
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.4
acSysFanTrayLEDs
This object built as a bit-field which represents the Fan-Tray's
LEDs status.
The first four bites represent the System's
LED status and the last four bites represent the Shelf-LED?s
status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.5
acSysFanTraySeverity
The Severity of the whole fan tray according to the current
active alarm in the alarm table: Critical, Major or cleared.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0cleared
1indeterminate
2warning
3minor
4major
5critical
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.6
acSysFanTrayFansConfiguredSpeed
The fan's configured speed in Tach units (RPM/120). Each Byte
represents a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.7
acSysFanTrayFansCurrentSpeed
The fan's mesured speed in Tach units (RPM/120). Each Byte represents
a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.8
acSysFanTrayFansStatus
A bit field which display the working status of each fan in
the Fan-Tray.
0 - Working
1 - Faulty.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-1
 .1.3.6.1.4.1.5003.9.10.10.4.22.1.9

acSysPowerSupplyTable

table
.1.3.6.1.4.1.5003.9.10.10.4.23 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPowerSupplyTable'
acSysPowerSupplyEntry row .1.3.6.1.4.1.5003.9.10.10.4.23.1
Indexes
Column Syntax OID
acSysPowerSupplyIndex
Power-Supply's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.1
acSysPowerSupplyGeographicalPosition
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.2
acSysPowerSupplyExistence
Is the Power-Supply present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.3
acSysPowerSupplyHwversion
PS?s HW version.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.4
acSysPowerSupplyLEDs
A bit-field representation of the Power-Supply LEDs' status.
The first four bites represent the Power-Supply LED's status
and the last four bites represent the Fault LED's status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.5
acSysPowerSupplySeverity
The Severity of the power-supply according to the current active
alarm in the alarm table.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1cleared
2indeterminate
3warning
4minor
5major
6critical
 .1.3.6.1.4.1.5003.9.10.10.4.23.1.6

acSysPEMTable

table
.1.3.6.1.4.1.5003.9.10.10.4.24 · 1 row entry · 5 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysPEMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPEMTable'
acSysPEMEntry row .1.3.6.1.4.1.5003.9.10.10.4.24.1
Indexes
Column Syntax OID
acSysPEMIndex
PEM-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5003.9.10.10.4.24.1.1
acSysPEMGeographicalPosition
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.4.24.1.2
acSysPEMExistence
Is the PEM-Module present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
 .1.3.6.1.4.1.5003.9.10.10.4.24.1.3
acSysPEMType
PEM?s Type.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.24.1.4
acSysPEMElectricWireConnection
Present the status of the electricity connector located on the
PEM card.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1connected
2disconnected
 .1.3.6.1.4.1.5003.9.10.10.4.24.1.5

acSysSATTable

table
.1.3.6.1.4.1.5003.9.10.10.4.25.21 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysSATTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysSATTable'
acSysSATEntry row .1.3.6.1.4.1.5003.9.10.10.4.25.21.1
Indexes
Column Syntax OID
acSysSATSatIndex
SAT-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1
acSysSATGeographicalPosition
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 2-4
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2
acSysSATType
SAT?s Type.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3
acSysSATInitInformation
Sat's Init Information.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0detected
1reConfig
2reConfigTry2
3reConfigTry3
4notInitialized
5initIsMissing
6initWasReset
7initFail
8initInProgress
9initUpdateREFTable
10remoteKeepAlive
11initComplete
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4
acSysSATTimingUnitExistence
Is the Timig Unit present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1exist
2notExist
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5
acSysSATTimingRefSelection
SAT's Timing Reference Selection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0bITSNOREF
1rEFFromBITSA
2rEFFromBITSB
3bITSNOREF1
4rEFFromLineClock1
5rEFFromLineClock2
6rEFFromLineClock3
7rEFFromLineClock7
 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6

acSysSATFramersTable

table
.1.3.6.1.4.1.5003.9.10.10.4.25.22 · 1 row entry · 8 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysSATFramersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysSATFramersTable'
acSysSATFramersEntry row .1.3.6.1.4.1.5003.9.10.10.4.25.22.1
Indexes
Column Syntax OID
acSysSATFramersSatIndex
SAT-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1
acSysSATFramersFramerIndex
Framer's Index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2
acSysSATFramersFramerInterfaceStatus
Framer Interface Status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0framerInitialized
1framerNotInitialized
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3
acSysSATFramersFramerLoopBackRef
Frame rLoop Back Reference.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0loopdisable
1loopenable
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4
acSysSATFramersFramerInterfaceType
Framer Interface Type.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0e1CRC4
1e1CAS
2e1FAS
3t1D4
4t1ESF
5t12
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5
acSysSATFramersFramerTransmitControl
Framer Transmit Control.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0systemClock
1aIS
2disableTransmit
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6
acSysSATFramersRxStatus
Provides the alarm status of the clock interface.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0alarmClear
1lOFAlarm
2lOSAlarm
3aISAlarm
4aISInit
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7
acSysSATFramersIsUsedAsPLLClock
Is Used As PLL Clock indication.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notUsed
1used
 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8

acSysPLLStatusTable

table
.1.3.6.1.4.1.5003.9.10.10.4.26.21 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSysPLLStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPLLStatusTable'
acSysPLLStatusEntry row .1.3.6.1.4.1.5003.9.10.10.4.26.21.1
Indexes
Column Syntax OID
acSysPLLStatusIndex
Table's Index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1
acSysPLLStatusOperatingMode
PLL's Current Operating Mode.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0freeRun
1lockToRef1
2lockToRef2
3lockToLocal
4holdOver
 .1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2