AC-PSTN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
64

acTrunkTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkTable'
acTrunkEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1
Indexes
Column Syntax OID
acTrunkIndex
Trunk ID at board in which the call is taking place.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-83
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1
acTrunkAdministrativeState
Trunk Administrative State.
Access: Online.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0locked
1unLocked
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2
acTrunkProtocolType
Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2).
Either:
NONE = 0
E1_EURO_ISDN = 1
T1_CAS = 2
T1_RAW_CAS = 3
T1_TRANSPARENT = 4
E1_TRANSPARENT_31 = 5
E1_TRANSP…
Enumerationr/w
Enumerated Values:
0nONE
1e1EuroISDN
2t1Cas
3t1RawCas
4t1Transparent
5e1Transparent31
6e1Transparent30
7e1Mfcr2
8e1CasR2
9e1RawCAS
10t1-NI2ISDN
11t1-4EssISDN
12t1-5Ess-9-ISDN
13t1-5Ess-10-ISDN
14t1-Dms100-ISDN
15j1-TRANSPARENT
16t1-NTT-ISDN
17e1-AUSTEL-ISDN
18e1-HKT-ISDN
19e1-KOR-ISDN
20t1-HKT-ISDN
21e1-QSIG
22e1-TNZ-22
23t1-EXTRA-23
28t1-IUA
29e1-IUA
30e1-EXTRA-30
31e1-FRENCH-VN3-ISDN
32t1-EXTRA-32
33eXTRA-33
34t1-EURO-ISDN
35t1-DMS100-MERIDIAN-ISDN
36t1-NI1-ISDN
37e1-DUA
38e1-Q931-PACKETS
39t1-Q931-PACKETS
40e1-NI2-ISDN
41e1-CAS-R15
43v5
50bRI-EURO-ISDN
51bRI-NI-2
52bRI-DMS100
53bRI-5ESS
54bRI-QSIG
55bRI-VNG
56bRI-NTT
57bRI-IUA
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3
acTrunkClockMaster
Used to select the trunk clock source.

0 = acCLOCK_MASTER_OFF (clock recovered from the line)
1 = acCLOCK_MASTER_ON (the trunk clock source is provided by
the internal/TDM bus clock source depending on t…
Enumerationr/w
Enumerated Values:
0acCLOCK-MASTER-OFF
1acCLOCK-MASTER-ON
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4
acTrunkFramingMethod
Selects the Framing method to be used for this trunk.
Access: Online.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0eXTENDED-SUPER-FRAME
1sUPER-FRAME
2e1-FRAMING-DDF
3e1-FRAMING-MFF-CRC4
4e1-FRAMING-MFF-CRC4-EXT
6t1-FRAMING-F4
7t1-FRAMING-F12
8t1-FRAMING-ESF
9t1-FRAMING-ESF-CRC6
10t1-FRAMING-F72
11t1-FRAMING-ESF-CRC6-JT
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5
acTrunkLineCode
Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans.

0 = Use B8ZS line code (for T1 trunks only = default)
1 = Use AMI line code (for T1 or E1 trunks)
2 = Use HDB3 line code (fo…
Enumerationr/w
Enumerated Values:
0acB8ZS
1acAMI
2acHDB3
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6
acTrunkTraceLevel
Defines the Trace level:
acNO_TRACE = 0
acFULL_ISDN_TRACE = 1
acLAYER3_ISDN_TRACE = 2
acONLY_ISDN_Q931_MSGS_TRACE = 3
acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4
acFULL_ISDN_TRACE_WITH_DUPLICATION = 5
acISDN_Q931_RAW_DATA_TR…
Enumerationr/w
Enumerated Values:
0acNO-TRACE
1acFULL-ISDN-TRACE
2acLAYER3-ISDN-TRACE
3acONLY-ISDN-Q931-MSGS-TRACE
4acLAYER3-ISDN-TRACE-NO-DUPLICATION
5acFULL-ISDN-TRACE-WITH-DUPLICATION
6acISDN-Q931-RAW-DATA-TRACE
7acISDN-Q921-RAW-DATA-TRACE
8acISDN-Q931-Q921-RAW-DATA-TRACE
10acSS7-MTP2
11acSS7-MTP2-AND-APPLI
12acSS7-MTP2-SL-L3-NO-MSU
15acSS7-AAL
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7
acTrunkDialPlanName
Sets the Dial Plan name that will be used on the specific trunk.

Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName
OctetStringr/w
Constraints:
range: 0-11
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8
acTrunkLineType
Line type.
lineTypeBRI(12) - If the physical type is BRI.
lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are
other lines that are already configured to either E1 or T1.
lineTypeUnknown(-1) - For non BRI IF wh…
Enumeration
Enumerated Values:
10lineTypeE1
11lineTypeT1
12lineTypeBRI
21lineTypeUnknown
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9
acTrunkAutoClockPriority
Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 =
highest Priority and is the default setting
100 = Do not choose this trunk).
Access: Online.
AC INI…
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10
acTrunkDeactivate
Deactivating a trunk forces AIS alarm on that trunk. Deactivation
is used for trunk maintenance without locking the trunk.
Activating the trunk will stop the alarm on the trunk.
notAvailable(0) appears when the trunk is…
Enumerationr/w
Enumerated Values:
0notAvailable
1deActivated
2activated
 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11

acTrunkLineTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkLineTable'
acTrunkLineEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1
Indexes
Column Syntax OID
acTrunkLineBuildOutLoss
Used to select the line build out loss to be used for this trunk.

0 = 0 dB
1 = 7.5 dB
2 = 15 dB
3 = 22.5 dB.
Access: Online.
AC INI-Param: LINEBUILDOUT.LOSS
Enumerationr/w
Enumerated Values:
0ac0DB
1ac7-5DB
2ac15DB
3ac22-5DB
 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.1
acTrunkLineBuildOutOverwrite
Used to overwrite the Framer's XPM registers values (these registers
control the line pulse shape).

0 = No overwrite
1 = Overwrite.
Access: Online.
AC INI-Param: LINEBUILDOUT.OVERWRITE
Enumerationr/w
Enumerated Values:
0acNO-OVER-WRITE
1acOVER-WRITE
 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.2
acTrunkLineBuildOutXPM0
Used to control the Framer's XPM0 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.

Should be used only by expert users.

Range = 0 to 25…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.3
acTrunkLineBuildOutXPM1
Used to control the Framer's XPM1 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.

Range = 0 to 255.
Access: Onlin…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.4
acTrunkLineBuildOutXPM2
Used to control the Framer's XPM2 register value (line pulse
shape control).
Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.

Should be used only by expert users.

Range = 0 to 25…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.5

acTrunkISDNCommonTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkISDNCommonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkISDNCommonTable'
acTrunkISDNCommonEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1
Indexes
Column Syntax OID
acTrunkISDNCommonTerminationSide
Used to set the ISDN Termination to either User or Network.
Termination = For ISDN only.
User side = 0
Network side = 1.
Access: Online.
AC INI-Param: TERMINATIONSIDE
Enumerationr/w
Enumerated Values:
0acUSER-TERMINATION-SIDE
1acNETWORK-TERMINATION-SIDE
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.1
acTrunkISDNCommonQ931LayerResponseBehavior
Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves.
Access: Online.
AC INI-Param: ISDNIBEHAVIOR
Integer32r/w
Constraints:
range: -2147483647-2147483647
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.2
acTrunkISDNCommonIncomingCallsBehavior
This is the bit-field used to determine several behavior options
that influence how the ISDN Stack INCOMING calls behave.
Refer to the Appendix A.8 'ISDN Flexible Behavior' in the
VoPLib Reference Library User's Manual …
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.3
acTrunkISDNCommonOutgoingCallsBehavior
This is the bit-field used to determine several behavior options
that influence how the ISDN Stack OUTGOING calls behave.
Refer to Appendix A.8 in the 'VoPLib Reference Library User's
Manual.
Access: Online.
AC INI-Para…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.4
acTrunkISDNCommonGeneralCCBehavior
This is the bit-field used to determine several general ISDN
behavior options. Refer to the Appendix A.8 'ISDN Flexible
Behavior' in the VoPLib Reference Library User's Manual Document
#: LTRT-00740.
Access: Online.
AC …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.5
acTrunkISDNCommonIuaInterfaceId
Defines the IUA trunk interface ID value - unsigned integer
- in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.6
acTrunkISDNCommonDuplicateQ931BuffMode
Activates / de-activates delivery of raw Q.931 messages. Refer
to the VoPLib documentation ('ISDN Flexible Behavior').
Access: Online.
AC INI-Param: ISDNDUPLICATEQ931BUFFMODE
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.7
acTrunkISDNCommonBRILayer2Mode
Indicates point to point or point to Multipoint mode for layer2.
Applicable in BRI trunks only. One of the following values:
Point to point = 0
Point to Multipoint = 1

.
Access: Online.
AC INI-Param: BriL…
Enumerationr/w
Enumerated Values:
0bRI-L2-MODE-P2P
1bRI-L2-MODE-P2MP
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.8

acTrunkISDNNfasTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkISDNNfasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkISDNNfasTable'
acTrunkISDNNfasEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1
Indexes
Column Syntax OID
acTrunkISDNNfasDchConfig
Defines D-channel configuration. This setting is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel
backup procedures.

0 = D-channel is Primary
1 = Backup
2 = NFAS.
Access: Online.
A…
Enumerationr/w
Enumerated Values:
0acDCH-CONFIG-PRIMARY
1acDCH-CONFIG-BACKUP
2acDCH-CONFIG-NFAS
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.1
acTrunkISDNNfasInterfaceId
Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID.
Refer to the VoPLib documentation(ISDN Flexible Behavior).

Default = (unsigned char)-1.

Range = 0 to 255.
Access: Online.
AC I…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.2
acTrunkISDNNfasGroupNumber
Relevant only for T1 ISDN NFAS trunks indicates the group number
of the NFAS group. ;Valid NFAS group numbers are only
1 to 9, 0 indicating that this trunk is not NFAS (in this
case the ISDNNFASInterfaceID and DchConfig…
Unsigned32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.3

acTrunkISDNDpnssTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkISDNDpnssTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkISDNDpnssTable'
acTrunkISDNDpnssEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1
Indexes
Column Syntax OID
acTrunkISDNDpnssBehavior
The DPNSSBehaviour parameter represents a Bit field parameter.
Each bit represents a specific type of DPNSS behavior. Currently
only the first 2 bits are in use.

- DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.1
acTrunkISDNDpnssNumRealChannels
This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of real channels. Default value is 30. Valid
range 1 to 30.
Access: Online.
AC INI-Param: DPNSSNumRealChannels
Unsigned32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.2
acTrunkISDNDpnssNumVirtualChannels
This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of virtual channels. Default value is 30. Valid
range 0 to 30.
Access: Online.
AC INI-Param: DPNSSNumVirtualChannels
Unsigned32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.3

acTrunkCASTable

table
.1.3.6.1.4.1.5003.9.10.9.1.1.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkCASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkCASTable'
acTrunkCASEntry row .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1
Indexes
Column Syntax OID
acTrunkCASTablesIndex
This parameter determines which CAS protocol file to use on
a specific trunk. The index value corresponds to the number
configured for the parameter CASFileName_X.
Range = not greater than the parameter defining the PST…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.1
acTrunkCASTablePerChannel
Sets the Cas protocol table index per channel.
User need to set each channel the table number 0-7, with comma
saperator between channels:
'1,3,1,3,1,3..'.
Access: Online.
AC INI-Param: CasChannelIndex
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.2

acTrunkV5Table

table
.1.3.6.1.4.1.5003.9.10.9.1.1.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkV5Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkV5Table'
acTrunkV5Entry row .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1
Indexes
Column Syntax OID
acTrunkV5NumberOfCChannels
Indicates the number of timeslots used as communication channels
in a V5 trunk.
0 - No C-channel, the trunk is voice only.
1 - Timeslot 16 is used for the V5 signaling

.
Access: Online.
AC INI-Param: V5Nu…
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.1
acTrunkV5ProtocolSide
Indicates the V5 side of the V5 protocol served by the trunk..
0 - AN side.
1 - LE side

.
Access: Online.
AC INI-Param: V5ProtocolSide
Enumerationr/w
Enumerated Values:
0an-Side
1le-Side
 .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.2

acCASFileTable

table
.1.3.6.1.4.1.5003.9.10.9.1.4.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acCASFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acCASFileTable'
acCASFileEntry row .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1
Indexes
Column Syntax OID
acCASFileIndex
Cas Table Indexd.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.1
acCASFileName
This is a pointer to the CAS filename index (0-7). The index
is CASFileName_X. CASFileName_0 through to CASFileName_7 are
the path and names of the CAS protocol configuration files.
AC INI-Param: CASFILENAME
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.2

acSonetSDHTable

table
.1.3.6.1.4.1.5003.9.10.9.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSonetSDHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acSonetSDHTable'
acSonetSDHEntry row .1.3.6.1.4.1.5003.9.10.9.1.5.1.1
Indexes
Column Syntax OID
acSonetSDHIndex
Fiber groupe index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.1
acSonetSDHFbrGrpMappingType
Selects SDH/SONET mapping type (signal label + payload mapping
type) for the PSTN interface.
Generally per Fiber Group.
Single Fiber Group supported in the PSTN interface of TP6310
and TP12610.
Applicable only to the TP…
Enumerationr/w
Enumerated Values:
0asynchronousVT15andDS1
1asynchronousTU12andE1
3sTS1asynchronousDS3
15undefined
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.2
acSonetSDHFbrGrpKlmNumberingScheme
Provides VC/VT numbering scheme for STM-1/OC3 fiber group.
Access: Offline.
AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme
Enumerationr/w
Enumerated Values:
0numberingScheme-MLK
1numberingScheme-LMK
2numberingScheme-KLM
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.3
acSonetSDHFbrGrpAPSDirectionMode
Sets the Automatic Protection Switch Unidir/Bidir mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_DirMode
Enumerationr/w
Enumerated Values:
0unidirectional
1bidirectional
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.4
acSonetSDHFbrGrpAPSRevertMode
Sets the Automatic Protection Switch Revertive mode for the
Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_RevertMode
Enumerationr/w
Enumerated Values:
0nonRevertive
1revertive
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.5
acSonetSDHFbrGrpAPSWaitToRestoreTime
Sets the APS Wait-to-restore time for the Fiber Group.
Access: Offline.
AC INI-Param: SDHFbrGrp_APS_WTR
Unsigned32r/w
Constraints:
range: 5-12
 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.6

acTrunkStatusTable

table
.1.3.6.1.4.1.5003.9.10.9.2.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acTrunkStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acTrunkStatusTable'
acTrunkStatusEntry row .1.3.6.1.4.1.5003.9.10.9.2.1.1.1
Indexes
Column Syntax OID
acTrunkStatusLedStatusColor
Trunk led status color.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0off
1red
2green
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.1
acTrunkStatusLedStatusState
Trunk led status blinking rate.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0steady
1blink
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.2
acTrunkStatusChannels
Reperesents Trunk's Channels-Status.
Each nibble (half Byte) presents one channel status, as following:
1 - invalid B-Channel.
2 - None.
3 - Open.
4 - Media.
5 - SS7.
6 - HDLC.
7 - DPNSS.
8 - CAS.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.3
acTrunkStatusV5InterfaceNum
V5.2 interface containing this trunk.
-1 means information not available or not relevant.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-31
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.4
acTrunkStatusV5LinkID
V5.2 link containing this trunk.
-1 means information not available or not relevant.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-62
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.5
acTrunkStatusDChannel
Describes the trunk's D channel status.
0 - dChannelEstablished
1 - dChannelNotEstablished
10 - dChannelNotApplicable.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0dChannelEstablished
1dChannelNotEstablished
10dChannelNotApplicable
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.6
acTrunkStatusAlarm
Describes the trunk's alarm status.
1 - Disabled.
2 - Active - OK.
3 - LOS/LOF Alarm.
4 - AIS Alarm.
5 - RAI Alram.
6 - D-Channel Alarm.
7 - Lower Layer Down.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0greyDisabled
1greenActive
2redLosLof
3blueAis
4yellowRai
5orangeDChannel
6purpleLowerLayerDown
 .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.7

acDigitalLegsTable

table
.1.3.6.1.4.1.5003.9.10.9.2.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acDigitalLegsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acDigitalLegsTable'
acDigitalLegsEntry row .1.3.6.1.4.1.5003.9.10.9.2.2.1.1
Indexes
Column Syntax OID
acDigitalLegsLegIndex
Decribes The Digital EndPoint In A Call.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.1
acDigitalLegsCallIndex
Decribes The Call which The Digital EndPoint Participant In
It.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.2
acDigitalLegsTrunk
Describes the Trunk the Leg belong to.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.3
acDigitalLegsBchannel
Describes the Bchannel the Leg belong to.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-76500
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.4
acDigitalLegsEchoCanceller
Enables or Disables the Echo Canceller.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.5
acDigitalLegsDTMFDetection
Enables or Disables the DTMF Detection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.6
acDigitalLegsVoiceVolume
Describs the volume of the voice in dB.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-20000
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.7
acDigitalLegsHighPassFilter
Enables or Disables theHigh Pass Filter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.8
acDigitalLegsInputGain
Describes the Input Gain on the leg in dB.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.9
acDigitalLegsDSPDevice
describes the DSP Device the Leg connected to.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-20000
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.10
acDigitalLegsLegName
Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.11

acSDHKLMNumberingSchemeTable

table
.1.3.6.1.4.1.5003.9.10.9.2.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acSDHKLMNumberingSchemeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PSTN-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PSTN-MIB::acSDHKLMNumberingSchemeTable'
acSDHKLMNumberingSchemeEntry row .1.3.6.1.4.1.5003.9.10.9.2.3.1.1
Indexes
Column Syntax OID
acSDHKLMNumberingSchemeTrunkIndex
Trunk Number.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.1
acSDHKLMNumberingSchemeTUG3OrSTS1
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-3
 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.2
acSDHKLMNumberingSchemeTUG2OrVTG
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-7
 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.3
acSDHKLMNumberingSchemeTU12OrVT15
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.4