AC-PM-Control-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
48
Rows
48
Columns
183

acPMCPConnectionLifetimeTable

table
.1.3.6.1.4.1.5003.10.8.2.31.1 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPConnectionLifetimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPConnectionLifetimeTable' 
Connection lifetime in seconds.
acPMCPConnectionLifetimeEntry row .1.3.6.1.4.1.5003.10.8.2.31.1.1
Indexes
Column Syntax OID
acPMCPConnectionLifetimeInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last
3 - Two before last
4 - Three before last.
Unsigned32
Constraints:
range: 0-4
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.1
acPMCPConnectionLifetimeVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.2
acPMCPConnectionLifetimeAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.3
acPMCPConnectionLifetimeMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.4
acPMCPConnectionLifetimeMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.5
acPMCPConnectionLifetimeVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.6
acPMCPConnectionLifetimeTimeBelowLowThreshold
Percent of interval time for which gauge is below what was determined
as the low threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.7
acPMCPConnectionLifetimeTimeBetweenThresholds
Percent of interval time for which gauge is above what was determined
as the high threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.8
acPMCPConnectionLifetimeTimeAboveHighThreshold
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.9
acPMCPConnectionLifetimeFullDayAverage
The average of full 24 hours.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.10
acPMCPConnectionLifetimeTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.1.1.11

acPMCPConnectionStateTable

table
.1.3.6.1.4.1.5003.10.8.2.31.2 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPConnectionStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPConnectionStateTable' 
MGC connection activity indicator.
acPMCPConnectionStateEntry row .1.3.6.1.4.1.5003.10.8.2.31.2.1
Indexes
Column Syntax OID
acPMCPConnectionStateInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.2.1.1
acPMCPConnectionStateChanges
Activity volume.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.2.1.2
acPMCPConnectionStateActiveTime
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.2.1.3

acPMCPCommandCounterTable

table
.1.3.6.1.4.1.5003.10.8.2.31.3 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCommandCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCommandCounterTable' 
MGC command/response counters. Index: 0=sent commands, 1=received commands
acPMCPCommandCounterEntry row .1.3.6.1.4.1.5003.10.8.2.31.3.1
Indexes
Column Syntax OID
acPMCPCommandCounterDirection
Direction index.
0 - transmit
1 - receive.
Enumeration
Enumerated Values:
0tx
1rx
 .1.3.6.1.4.1.5003.10.8.2.31.3.1.1
acPMCPCommandCounterInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.3.1.2
acPMCPCommandCounterVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.3.1.3
acPMCPCommandCounterTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.3.1.4

acPMCPRetransmissionCountTable

table
.1.3.6.1.4.1.5003.10.8.2.31.4 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPRetransmissionCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPRetransmissionCountTable' 
Number of transaction retransmissions.
The first direction (tx(0)) counts the transactions sent from the board, 
while the second direction (rx(1)) counts the incoming retransmissions.
acPMCPRetransmissionCountEntry row .1.3.6.1.4.1.5003.10.8.2.31.4.1
Indexes
Column Syntax OID
acPMCPRetransmissionCountDirection
Direction index.
0 - transmit
1 - receive.
Enumeration
Enumerated Values:
0tx
1rx
 .1.3.6.1.4.1.5003.10.8.2.31.4.1.1
acPMCPRetransmissionCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.4.1.2
acPMCPRetransmissionCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.4.1.3
acPMCPRetransmissionCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.4.1.4

acPMActiveContextCountTable

table
.1.3.6.1.4.1.5003.10.8.2.31.5 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMActiveContextCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMActiveContextCountTable' 
Number of active contexts
acPMActiveContextCountEntry row .1.3.6.1.4.1.5003.10.8.2.31.5.1
Indexes
Column Syntax OID
acPMActiveContextCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.1
acPMActiveContextCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.2
acPMActiveContextCountAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.3
acPMActiveContextCountMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.4
acPMActiveContextCountMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.5
acPMActiveContextCountVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.6
acPMActiveContextCountTimeBelowLowThreshold
Percent of interval time for which gauge is below what was determined
as the low threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.7
acPMActiveContextCountTimeBetweenThresholds
Percent of interval time for which gauge is above what was determined
as the high threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.8
acPMActiveContextCountTimeAboveHighThreshold
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.9
acPMActiveContextCountFullDayAverage
The average of full 24 hours.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.10
acPMActiveContextCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.5.1.11

acPMCPCommandSuccessCountTable

table obsolete
.1.3.6.1.4.1.5003.10.8.2.31.6 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCommandSuccessCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCommandSuccessCountTable' 
Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify
acPMCPCommandSuccessCountEntry row .1.3.6.1.4.1.5003.10.8.2.31.6.1
Indexes
Column Syntax OID
acPMCPCommandSuccessCountCommandTypeobsolete
Command type:
0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities,
7=Notify.
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.31.6.1.1
acPMCPCommandSuccessCountIntervalobsolete
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.6.1.2
acPMCPCommandSuccessCountValobsolete
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.6.1.3
acPMCPCommandSuccessCountTotalobsolete
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.6.1.4

acPMCPCommandFailureCountTable

table obsolete
.1.3.6.1.4.1.5003.10.8.2.31.7 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCommandFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCommandFailureCountTable' 
Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify
acPMCPCommandFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.31.7.1
Indexes
Column Syntax OID
acPMCPCommandFailureCountCommandTypeobsolete
Command type:
0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities,
7=Notify.
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.31.7.1.1
acPMCPCommandFailureCountIntervalobsolete
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.7.1.2
acPMCPCommandFailureCountValobsolete
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.7.1.3
acPMCPCommandFailureCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.7.1.4

acPMcpCmdProcessTimeTable

table
.1.3.6.1.4.1.5003.10.8.2.31.8 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMcpCmdProcessTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMcpCmdProcessTimeTable' 
Processing time (in Microseconds), per command type.
acPMcpCmdProcessTimeEntry row .1.3.6.1.4.1.5003.10.8.2.31.8.1
Indexes
Column Syntax OID
acPMcpCmdProcessTimeInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.1
acPMcpCmdProcessTimeVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.2
acPMcpCmdProcessTimeAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.3
acPMcpCmdProcessTimeMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.4
acPMcpCmdProcessTimeMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.5
acPMcpCmdProcessTimeVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.6
acPMcpCmdProcessTimeTimeBelowLowThreshold
Percent of interval time for which gauge is below what was determined
as the low threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.7
acPMcpCmdProcessTimeTimeBetweenThresholds
Percent of interval time for which gauge is above what was determined
as the high threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.8
acPMcpCmdProcessTimeTimeAboveHighThreshold
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.9
acPMcpCmdProcessTimeFullDayAverage
The average of full 24 hours.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.10
acPMcpCmdProcessTimeTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.8.1.11

acPMcpTransactionProcessTimerTable

table
.1.3.6.1.4.1.5003.10.8.2.31.9 · 1 row entry · 11 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMcpTransactionProcessTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMcpTransactionProcessTimerTable' 
Processing time (in Microseconds), For transaction request.
acPMcpTransactionProcessTimerEntry row .1.3.6.1.4.1.5003.10.8.2.31.9.1
Indexes
Column Syntax OID
acPMcpTransactionProcessTimerInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.1
acPMcpTransactionProcessTimerVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.2
acPMcpTransactionProcessTimerAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.3
acPMcpTransactionProcessTimerMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.4
acPMcpTransactionProcessTimerMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.5
acPMcpTransactionProcessTimerVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.6
acPMcpTransactionProcessTimerTimeBelowLowThreshold
Percent of interval time for which gauge is below what was determined
as the low threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.7
acPMcpTransactionProcessTimerTimeBetweenThresholds
Percent of interval time for which gauge is above what was determined
as the high threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.8
acPMcpTransactionProcessTimerTimeAboveHighThreshold
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.9
acPMcpTransactionProcessTimerFullDayAverage
The average of full 24 hours.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.10
acPMcpTransactionProcessTimerTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.9.1.11

acPMCPCallAttemptsPerSecTable

table
.1.3.6.1.4.1.5003.10.8.2.31.10 · 1 row entry · 6 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCallAttemptsPerSecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCallAttemptsPerSecTable' 
Number of Call attempts (successful and unsuccessful)  for second
acPMCPCallAttemptsPerSecEntry row .1.3.6.1.4.1.5003.10.8.2.31.10.1
Indexes
Column Syntax OID
acPMCPCallAttemptsPerSecInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.1
acPMCPCallAttemptsPerSecVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.2
acPMCPCallAttemptsPerSecAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.3
acPMCPCallAttemptsPerSecMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.4
acPMCPCallAttemptsPerSecMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.5
acPMCPCallAttemptsPerSecVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.31.10.1.6

acPMMegacoServiceChangeCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.1 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoServiceChangeCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoServiceChangeCountTable' 
Number of service changes, per method. Index: 0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected, 5=Handoff
acPMMegacoServiceChangeCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.1.1
Indexes
Column Syntax OID
acPMMegacoServiceChangeCountMethod
Method:
0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected,
5=Handoff.
Enumeration
Enumerated Values:
0failOver
1forced
2graceful
3restart
4disconnected
5handoff
 .1.3.6.1.4.1.5003.10.8.2.41.1.1.1
acPMMegacoServiceChangeCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.1.1.2
acPMMegacoServiceChangeCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.1.1.3

acPMCPCmdSuccessCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.2 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCmdSuccessCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCmdSuccessCountTable' 
Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify
acPMCPCmdSuccessCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.2.1
Indexes
Column Syntax OID
acPMCPCmdSuccessCountCommandType
Command type:
0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities,
7=Notify.
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.41.2.1.1
acPMCPCmdSuccessCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.2.1.2
acPMCPCmdSuccessCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.2.1.3
acPMCPCmdSuccessCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.41.2.1.4

acPMCPCmdFailureCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.3 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMCPCmdFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMCPCmdFailureCountTable' 
Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify
acPMCPCmdFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.3.1
Indexes
Column Syntax OID
acPMCPCmdFailureCountCommandType
Command type:
0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities,
7=Notify.
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.41.3.1.1
acPMCPCmdFailureCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.3.1.2
acPMCPCmdFailureCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.3.1.3
acPMCPCmdFailureCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.41.3.1.4

acPMcpUMTSHandOverCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.4 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMcpUMTSHandOverCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMcpUMTSHandOverCountTable' 
Number of active channels per trunk (index: trunk number).
acPMcpUMTSHandOverCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.4.1
Indexes
Column Syntax OID
acPMcpUMTSHandOverCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.4.1.1
acPMcpUMTSHandOverCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.4.1.2

acPMMegacoAddFailureCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.5 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoAddFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoAddFailureCountTable' 
Number of Megaco failures for Add
acPMMegacoAddFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.5.1
Indexes
Column Syntax OID
acPMMegacoAddFailureCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.5.1.1
acPMMegacoAddFailureCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.5.1.2

acPMMegacoModifyFailureCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.6 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoModifyFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoModifyFailureCountTable' 
Number of Megaco failures for Modify
acPMMegacoModifyFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.6.1
Indexes
Column Syntax OID
acPMMegacoModifyFailureCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.6.1.1
acPMMegacoModifyFailureCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.6.1.2

acPMMegacoSuccessfulAddWithLoopbackTable

table
.1.3.6.1.4.1.5003.10.8.2.41.7 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoSuccessfulAddWithLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoSuccessfulAddWithLoopbackTable' 
Number of successful Megaco Add commands with  loopback.
acPMMegacoSuccessfulAddWithLoopbackEntry row .1.3.6.1.4.1.5003.10.8.2.41.7.1
Indexes
Column Syntax OID
acPMMegacoSuccessfulAddWithLoopbackInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.7.1.1
acPMMegacoSuccessfulAddWithLoopbackVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.7.1.2

acPMMegacoFailedAddWithLoopbackTable

table
.1.3.6.1.4.1.5003.10.8.2.41.8 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoFailedAddWithLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoFailedAddWithLoopbackTable' 
Number of failed  Megaco Add commands with  loopback.
acPMMegacoFailedAddWithLoopbackEntry row .1.3.6.1.4.1.5003.10.8.2.41.8.1
Indexes
Column Syntax OID
acPMMegacoFailedAddWithLoopbackInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.8.1.1
acPMMegacoFailedAddWithLoopbackVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.8.1.2

acPMMegacoOutgoingCommandSuccessCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.9 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoOutgoingCommandSuccessCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoOutgoingCommandSuccessCountTable' 
Number of successful Megaco outgoing commands.
acPMMegacoOutgoingCommandSuccessCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.9.1
Indexes
Column Syntax OID
acPMMegacoOutgoingCommandSuccessCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.9.1.1
acPMMegacoOutgoingCommandSuccessCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.9.1.2

acPMMegacoOutgoingCommandFailureCountTable

table
.1.3.6.1.4.1.5003.10.8.2.41.10 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMegacoOutgoingCommandFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMegacoOutgoingCommandFailureCountTable' 
Number of failed  Megaco  outgoing commands .
acPMMegacoOutgoingCommandFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.41.10.1
Indexes
Column Syntax OID
acPMMegacoOutgoingCommandFailureCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.41.10.1.1
acPMMegacoOutgoingCommandFailureCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.41.10.1.2

acPMMGCPRsipReasonCountTable

table
.1.3.6.1.4.1.5003.10.8.2.51.1 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPRsipReasonCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPRsipReasonCountTable' 
Number of RSIPs, per reason code.
acPMMGCPRsipReasonCountEntry row .1.3.6.1.4.1.5003.10.8.2.51.1.1
Indexes
Column Syntax OID
acPMMGCPRsipReasonCountReasonCode
Reason code. Index: 0=Restart, 1=Forced, 2=Disconnected, 3=KeepAlive,
4=Graceful, 5=CancelGraceful, 6=ResetBoard, 7=NonVoice.
Enumeration
Enumerated Values:
0restart
1forced
2disconnected
3keepAlive
4graceful
5cancelGraceful
6resetBoard
7nonVoice
 .1.3.6.1.4.1.5003.10.8.2.51.1.1.1
acPMMGCPRsipReasonCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.1.1.2
acPMMGCPRsipReasonCountVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.1.1.3

acPMMGCPGeneratedDLCXTable

table
.1.3.6.1.4.1.5003.10.8.2.51.2 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPGeneratedDLCXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPGeneratedDLCXTable' 
This parameter counts the number of gateway-generated DLCX commands (as opposed to DLCX commands received from the call-agent).
acPMMGCPGeneratedDLCXEntry row .1.3.6.1.4.1.5003.10.8.2.51.2.1
Indexes
Column Syntax OID
acPMMGCPGeneratedDLCXInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.2.1.1
acPMMGCPGeneratedDLCXVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.2.1.2

acPMMGCPCommandSuccessCountTable

table
.1.3.6.1.4.1.5003.10.8.2.51.3 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPCommandSuccessCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPCommandSuccessCountTable' 
Number of successful commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8).
acPMMGCPCommandSuccessCountEntry row .1.3.6.1.4.1.5003.10.8.2.51.3.1
Indexes
Column Syntax OID
acPMMGCPCommandSuccessCountCommandType
Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY
(5),AUEP(6),AUCX (7),RSIP(8).
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.51.3.1.1
acPMMGCPCommandSuccessCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.3.1.2
acPMMGCPCommandSuccessCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.3.1.3
acPMMGCPCommandSuccessCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.51.3.1.4

acPMMGCPCommandFailureCountTable

table
.1.3.6.1.4.1.5003.10.8.2.51.4 · 1 row entry · 4 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPCommandFailureCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPCommandFailureCountTable' 
Number of failing commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8).
acPMMGCPCommandFailureCountEntry row .1.3.6.1.4.1.5003.10.8.2.51.4.1
Indexes
Column Syntax OID
acPMMGCPCommandFailureCountCommandType
Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY
(5),AUEP(6),AUCX (7),RSIP(8).
Enumeration
Enumerated Values:
0add
1move
2modify
3subtract
4sc
5auditValue
6auditCapabilities
7notify
 .1.3.6.1.4.1.5003.10.8.2.51.4.1.1
acPMMGCPCommandFailureCountInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.4.1.2
acPMMGCPCommandFailureCountVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.4.1.3
acPMMGCPCommandFailureCountTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.51.4.1.4

acPMMGCPLoopbackCRCXTable

table
.1.3.6.1.4.1.5003.10.8.2.51.5 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPLoopbackCRCXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPLoopbackCRCXTable'
acPMMGCPLoopbackCRCXEntry row .1.3.6.1.4.1.5003.10.8.2.51.5.1
Indexes
Column Syntax OID
acPMMGCPLoopbackCRCXInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.5.1.1
acPMMGCPLoopbackCRCXVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.5.1.2

acPMMGCPFailedLoopbackCRCXTable

table
.1.3.6.1.4.1.5003.10.8.2.51.6 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPFailedLoopbackCRCXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPFailedLoopbackCRCXTable'
acPMMGCPFailedLoopbackCRCXEntry row .1.3.6.1.4.1.5003.10.8.2.51.6.1
Indexes
Column Syntax OID
acPMMGCPFailedLoopbackCRCXInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.6.1.1
acPMMGCPFailedLoopbackCRCXVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.6.1.2

acPMMGCPGeneratedNTFYTable

table
.1.3.6.1.4.1.5003.10.8.2.51.7 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPGeneratedNTFYTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPGeneratedNTFYTable'
acPMMGCPGeneratedNTFYEntry row .1.3.6.1.4.1.5003.10.8.2.51.7.1
Indexes
Column Syntax OID
acPMMGCPGeneratedNTFYInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.7.1.1
acPMMGCPGeneratedNTFYVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.7.1.2

acPMMGCPFailedNTFYResponsesTable

table
.1.3.6.1.4.1.5003.10.8.2.51.8 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPFailedNTFYResponsesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPFailedNTFYResponsesTable'
acPMMGCPFailedNTFYResponsesEntry row .1.3.6.1.4.1.5003.10.8.2.51.8.1
Indexes
Column Syntax OID
acPMMGCPFailedNTFYResponsesInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.8.1.1
acPMMGCPFailedNTFYResponsesVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.8.1.2

acPMMGCPFailedRSIPResponsesTable

table
.1.3.6.1.4.1.5003.10.8.2.51.9 · 1 row entry · 2 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPFailedRSIPResponsesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPFailedRSIPResponsesTable'
acPMMGCPFailedRSIPResponsesEntry row .1.3.6.1.4.1.5003.10.8.2.51.9.1
Indexes
Column Syntax OID
acPMMGCPFailedRSIPResponsesInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.9.1.1
acPMMGCPFailedRSIPResponsesVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.9.1.2

acPMMGCPFailedCRCXResponsesTable

table
.1.3.6.1.4.1.5003.10.8.2.51.10 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPFailedCRCXResponsesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPFailedCRCXResponsesTable' 
Number of failed responses to CRCX commands, per reason code.
acPMMGCPFailedCRCXResponsesEntry row .1.3.6.1.4.1.5003.10.8.2.51.10.1
Indexes
Column Syntax OID
acPMMGCPFailedCRCXResponsesReasonCode
Reason code Index. The Numbers at the values are as in the RFC.
Enumeration
Enumerated Values:
0reasoncode-400
1reasoncode-401
2reasoncode-402
3reasoncode-403
4reasoncode-404
5reasoncode-405
6reasoncode-406
7reasoncode-407
8reasoncode-409
9reasoncode-410
10reasoncode-500
11reasoncode-501
12reasoncode-502
13reasoncode-503
14reasoncode-504
15reasoncode-505
16reasoncode-506
17reasoncode-507
18reasoncode-508
19reasoncode-509
20reasoncode-510
21reasoncode-511
22reasoncode-512
23reasoncode-513
24reasoncode-514
25reasoncode-515
26reasoncode-516
27reasoncode-517
28reasoncode-518
29reasoncode-519
30reasoncode-520
31reasoncode-521
32reasoncode-522
33reasoncode-523
34reasoncode-524
35reasoncode-525
36reasoncode-526
37reasoncode-527
38reasoncode-528
39reasoncode-529
40reasoncode-530
41reasoncode-531
42reasoncode-532
43reasoncode-533
44reasoncode-534
45reasoncode-535
46reasoncode-536
47reasoncode-537
48reasoncode-538
49reasoncode-539
50reasoncode-540
51reasoncode-541
 .1.3.6.1.4.1.5003.10.8.2.51.10.1.1
acPMMGCPFailedCRCXResponsesInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.10.1.2
acPMMGCPFailedCRCXResponsesVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.10.1.3

acPMMGCPFailedMDCXResponsesTable

table
.1.3.6.1.4.1.5003.10.8.2.51.11 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPFailedMDCXResponsesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPFailedMDCXResponsesTable' 
Number of failed responses to CRCX commands, per reason code.
acPMMGCPFailedMDCXResponsesEntry row .1.3.6.1.4.1.5003.10.8.2.51.11.1
Indexes
Column Syntax OID
acPMMGCPFailedMDCXResponsesReasonCode
Reason code Index. The Numbers at the values are as in the RFC.
Enumeration
Enumerated Values:
0reasoncode-400
1reasoncode-401
2reasoncode-402
3reasoncode-403
4reasoncode-404
5reasoncode-405
6reasoncode-406
7reasoncode-407
8reasoncode-409
9reasoncode-410
10reasoncode-500
11reasoncode-501
12reasoncode-502
13reasoncode-503
14reasoncode-504
15reasoncode-505
16reasoncode-506
17reasoncode-507
18reasoncode-508
19reasoncode-509
20reasoncode-510
21reasoncode-511
22reasoncode-512
23reasoncode-513
24reasoncode-514
25reasoncode-515
26reasoncode-516
27reasoncode-517
28reasoncode-518
29reasoncode-519
30reasoncode-520
31reasoncode-521
32reasoncode-522
33reasoncode-523
34reasoncode-524
35reasoncode-525
36reasoncode-526
37reasoncode-527
38reasoncode-528
39reasoncode-529
40reasoncode-530
41reasoncode-531
42reasoncode-532
43reasoncode-533
44reasoncode-534
45reasoncode-535
46reasoncode-536
47reasoncode-537
48reasoncode-538
49reasoncode-539
50reasoncode-540
51reasoncode-541
 .1.3.6.1.4.1.5003.10.8.2.51.11.1.1
acPMMGCPFailedMDCXResponsesInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.11.1.2
acPMMGCPFailedMDCXResponsesVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.11.1.3

acPMMGCPGeneratedDLCXPerReasonCodeTable

table
.1.3.6.1.4.1.5003.10.8.2.51.12 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMMGCPGeneratedDLCXPerReasonCodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMMGCPGeneratedDLCXPerReasonCodeTable' 
Number of gateway-generated DLCX commands per reason code. when you choose 0 its 900(ENDPOINT_MALFUNCTIONING) and so on.
acPMMGCPGeneratedDLCXPerReasonCodeEntry row .1.3.6.1.4.1.5003.10.8.2.51.12.1
Indexes
Column Syntax OID
acPMMGCPGeneratedDLCXPerReasonCodeReasonCode
Reason code Index. The Numbers at the values are as in the RFC.
Enumeration
Enumerated Values:
0eNDPOINT-MALFUNCTIONING-900
1eNDPOINT-TAKEN-OUT-OF-SERVICE-901
2lOSS-OF-LOWER-LAYER-CONNECTIVITY-902
3qOS-RESOURCE-RESERVATION-WAS-LOST-903
4mANUAL-INTERVENTION-904
5fACILITY-FAILURE-905
 .1.3.6.1.4.1.5003.10.8.2.51.12.1.1
acPMMGCPGeneratedDLCXPerReasonCodeInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.51.12.1.2
acPMMGCPGeneratedDLCXPerReasonCodeVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.51.12.1.3

acPMSIPAttemptedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.1 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPAttemptedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPAttemptedCallsTable' 
Number of attempted calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPAttemptedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.1.1
Indexes
Column Syntax OID
acPMSIPAttemptedCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.1.1.1
acPMSIPAttemptedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.1.1.2
acPMSIPAttemptedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.1.1.3

acPMSIPCallDurationTable

table
.1.3.6.1.4.1.5003.10.8.2.52.2 · 1 row entry · 12 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPCallDurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPCallDurationTable' 
Call Duration (Index 0 for Tel2IP and Index 1 for IP2Tel);The Total preprty gives the sum of all calls duration, while the Value property is for the last call only
acPMSIPCallDurationEntry row .1.3.6.1.4.1.5003.10.8.2.52.2.1
Indexes
Column Syntax OID
acPMSIPCallDurationDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.1
acPMSIPCallDurationInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.2
acPMSIPCallDurationVal
Value of gauge or counter.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.3
acPMSIPCallDurationAverage
Average value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.4
acPMSIPCallDurationMax
Maximum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.5
acPMSIPCallDurationMin
Minimum value with in the period time.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.6
acPMSIPCallDurationVolume
Activity volume.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.7
acPMSIPCallDurationTimeBelowLowThreshold
Percent of interval time for which gauge is below what was determined
as the low threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.8
acPMSIPCallDurationTimeBetweenThresholds
Percent of interval time for which gauge is above what was determined
as the high threshold.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.9
acPMSIPCallDurationTimeAboveHighThreshold
Percent of interval time for which gauge is between what were
determined as the low and high thresholds.
Integer32
Constraints:
range: -1-100
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.10
acPMSIPCallDurationFullDayAverage
The average of full 24 hours.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.11
acPMSIPCallDurationTotal
Total since last reset.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.5003.10.8.2.52.2.1.12

acPMSIPNoMatchCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.3 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPNoMatchCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPNoMatchCallsTable' 
Number of no match calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPNoMatchCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.3.1
Indexes
Column Syntax OID
acPMSIPNoMatchCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.3.1.1
acPMSIPNoMatchCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.3.1.2
acPMSIPNoMatchCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.3.1.3

acPMSIPBusyCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.4 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPBusyCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPBusyCallsTable' 
Number of busy calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPBusyCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.4.1
Indexes
Column Syntax OID
acPMSIPBusyCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.4.1.1
acPMSIPBusyCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.4.1.2
acPMSIPBusyCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.4.1.3

acPMSIPNoAnswerCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.5 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPNoAnswerCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPNoAnswerCallsTable' 
Number of no answer calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPNoAnswerCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.5.1
Indexes
Column Syntax OID
acPMSIPNoAnswerCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.5.1.1
acPMSIPNoAnswerCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.5.1.2
acPMSIPNoAnswerCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.5.1.3

acPMSIPNoRouteCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.6 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPNoRouteCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPNoRouteCallsTable' 
Number of no route calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPNoRouteCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.6.1
Indexes
Column Syntax OID
acPMSIPNoRouteCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.6.1.1
acPMSIPNoRouteCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.6.1.2
acPMSIPNoRouteCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.6.1.3

acPMSIPFailCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.7 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPFailCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPFailCallsTable' 
Number of calls that failed because of other reasons (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPFailCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.7.1
Indexes
Column Syntax OID
acPMSIPFailCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.7.1.1
acPMSIPFailCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.7.1.2
acPMSIPFailCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.7.1.3

acPMSIPEstablishedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.8 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPEstablishedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPEstablishedCallsTable' 
Number of established calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPEstablishedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.8.1
Indexes
Column Syntax OID
acPMSIPEstablishedCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.8.1.1
acPMSIPEstablishedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.8.1.2
acPMSIPEstablishedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.8.1.3

acPMSIPFaxAttemptedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.9 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPFaxAttemptedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPFaxAttemptedCallsTable' 
Number of attempted fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPFaxAttemptedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.9.1
Indexes
Column Syntax OID
acPMSIPFaxAttemptedCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.9.1.1
acPMSIPFaxAttemptedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.9.1.2
acPMSIPFaxAttemptedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.9.1.3

acPMSIPFaxSuccessCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.10 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPFaxSuccessCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPFaxSuccessCallsTable' 
Number of success fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPFaxSuccessCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.10.1
Indexes
Column Syntax OID
acPMSIPFaxSuccessCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.10.1.1
acPMSIPFaxSuccessCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.10.1.2
acPMSIPFaxSuccessCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.10.1.3

acPMSIPForwardedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.11 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPForwardedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPForwardedCallsTable' 
Number of calls released due to forwarding (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPForwardedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.11.1
Indexes
Column Syntax OID
acPMSIPForwardedCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.11.1.1
acPMSIPForwardedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.11.1.2
acPMSIPForwardedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.11.1.3

acPMSIPNoResourcesCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.12 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPNoResourcesCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPNoResourcesCallsTable' 
Number of calls released because of no resources (Index 0 for TEL2IP and Index 1 for IP2TEL)
acPMSIPNoResourcesCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.12.1
Indexes
Column Syntax OID
acPMSIPNoResourcesCallsDirection
Direction index - TEL2IP(0), IP2TEL(1).
Enumeration
Enumerated Values:
0tel2IP
1iP2Tel
 .1.3.6.1.4.1.5003.10.8.2.52.12.1.1
acPMSIPNoResourcesCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.12.1.2
acPMSIPNoResourcesCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.12.1.3

acPMSIPTel2IPTrunkEstablishedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.13 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPTel2IPTrunkEstablishedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPTel2IPTrunkEstablishedCallsTable' 
Number of Tel2IP established calls per trunk.
acPMSIPTel2IPTrunkEstablishedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.13.1
Indexes
Column Syntax OID
acPMSIPTel2IPTrunkEstablishedCallsTrunkNum
Trunk number.
0 is the first trunk.
Unsigned32
Constraints:
range: 0-83
 .1.3.6.1.4.1.5003.10.8.2.52.13.1.1
acPMSIPTel2IPTrunkEstablishedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.13.1.2
acPMSIPTel2IPTrunkEstablishedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.13.1.3

acPMSIPIP2TelTrunkEstablishedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.14 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPIP2TelTrunkEstablishedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPIP2TelTrunkEstablishedCallsTable' 
Number of IP2Tel established calls per trunk.
acPMSIPIP2TelTrunkEstablishedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.14.1
Indexes
Column Syntax OID
acPMSIPIP2TelTrunkEstablishedCallsTrunkNum
Trunk number.
0 is the first trunk.
Unsigned32
Constraints:
range: 0-83
 .1.3.6.1.4.1.5003.10.8.2.52.14.1.1
acPMSIPIP2TelTrunkEstablishedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.14.1.2
acPMSIPIP2TelTrunkEstablishedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.14.1.3

acPMSIPTel2IPTrunkGroupEstablishedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.15 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPTel2IPTrunkGroupEstablishedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPTel2IPTrunkGroupEstablishedCallsTable' 
Number of Tel2IP established calls per trunk group.
acPMSIPTel2IPTrunkGroupEstablishedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.15.1
Indexes
Column Syntax OID
acPMSIPTel2IPTrunkGroupEstablishedCallsGroupNum
Trunk Group number.
0 is the first trunk group.
Unsigned32
Constraints:
range: 0-83
 .1.3.6.1.4.1.5003.10.8.2.52.15.1.1
acPMSIPTel2IPTrunkGroupEstablishedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.15.1.2
acPMSIPTel2IPTrunkGroupEstablishedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.15.1.3

acPMSIPIP2TelTrunkGroupEstablishedCallsTable

table
.1.3.6.1.4.1.5003.10.8.2.52.16 · 1 row entry · 3 columns
Open in standard view
Uses the audiocodes variant from /opt/observium/mibs/audiocodes.
Command help
Walk acPMSIPIP2TelTrunkGroupEstablishedCallsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-PM-Control-MIB' -M '/opt/observium/mibs/audiocodes:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-PM-Control-MIB::acPMSIPIP2TelTrunkGroupEstablishedCallsTable' 
Number of IP2Tel established calls per trunk group.
acPMSIPIP2TelTrunkGroupEstablishedCallsEntry row .1.3.6.1.4.1.5003.10.8.2.52.16.1
Indexes
Column Syntax OID
acPMSIPIP2TelTrunkGroupEstablishedCallsGroupNum
Trunk Group number.
0 is the first trunk group.
Unsigned32
Constraints:
range: 0-83
 .1.3.6.1.4.1.5003.10.8.2.52.16.1.1
acPMSIPIP2TelTrunkGroupEstablishedCallsInterval
Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.5003.10.8.2.52.16.1.2
acPMSIPIP2TelTrunkGroupEstablishedCallsVal
Value of gauge or counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5003.10.8.2.52.16.1.3