SyncE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
21

fsSynceTable

table
.1.3.6.1.4.1.29601.2.79.1.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsSynceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SyncE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SyncE-MIB::fsSynceTable' 
This table contains information about SyncE module
at global level.
fsSynceEntry row .1.3.6.1.4.1.29601.2.79.1.1.2.1
Contains information about parameters of a switch/router
instance. The entry in this table is created using the
fsSynceContextRowStatus object only if the virtual context is
existing in the system and deleted using fsSy…
Indexes
Column Syntax OID
fsSynceContextId
This object is a unique context identifier for each entry.
Each virtual context will be able to run SyncE protocol individually
and will be distinguished by this object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.1
fsSynceTraceOption
This variable governs the trace levels in the SyncE module.

A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping bet…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.2
fsSynceQLMode
This object is used to configure QL Enable/Disable mode for
the selection process in SyncE module.
The default value of this object is Enabled.
In the disabled state, the quality level of the source will not
be consider…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.3
fsSynceQLValue
This object contains the QL value selected through the clock selection
process. The value of this object shall be used while transmitting the
SSM packets.
If this value is set by user, then automatic selection of clock …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.4
fsSynceSSMOptionMode
This object is used to select Option 1(Europe) or Option 2(America)
clocks in SyncE.
Enumerationr/w
Enumerated Values:
1option1
2option2Gen1
3option2Gen2
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.5
fsSynceSelectedInterface
This object represents the currently selected interface which QL value
is being used for transmitting QL in SSM packets.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.6
fsSynceContextRowStatus
Used for creation/deletion of entries in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.79.1.1.2.1.7

fsSynceIfTable

table
.1.3.6.1.4.1.29601.2.79.1.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the aricent variant from /opt/observium/mibs/aricent.
Command help
Walk fsSynceIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SyncE-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SyncE-MIB::fsSynceIfTable' 
Table containing configuration information on SyncE interfaces.
fsSynceIfEntry row .1.3.6.1.4.1.29601.2.79.1.2.1.1
This object contains SyncE configuration information of an interface.
Indexes
Column Syntax OID
fsSynceIfIndex
Uniquely identifies an interface in the system.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.1
fsSynceIfSynceMode
This object controls enabling/disabling of Synchronous Ethernet
feature on an interface. In the disabled state, SyncE
packets will not considered for synchronizing the system clock.
The default value of this object is d…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.2
fsSynceIfEsmcMode
This object represents the ESMC mode i.e. whether SSM is expected
to be received on this interface or SSM are to be transmitted on this
interface.
rx : SSM is expected to be received on this interface.
tx : SSM is expec…
Enumerationr/w
Enumerated Values:
0none
1rx
2tx
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.3
fsSynceIfPriority
This object contains the priority value of an interface. It is used
by the selection algorithm in order to select the best QL value
among all the interfaces. In the disabled mode, the port QL value will
not be a candida…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.4
fsSynceIfQLValue
This object contains the QL value for a SyncE interface.
The value of this object is not considered in QL disabled mode.
The default value on this object is DNU(5).
Enumerationr/w
Enumerated Values:
1qlPRC
2qlSSUA
3qlSSUB
4qlSEC
5qlDNU
6qlPRS
7qlSTU
8qlST2
9qlTNC
10qlST3E
11qlST3
12qlSMC
13qlRES
14qlPROV
15qlDUS
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.5
fsSynceIfIsRxQLForced
This object will be true if operator manually assigns the QL value to an
interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.6
fsSynceIfLockoutStatus
This object contains the lockout status for SyncE interface.
Lockout temporarily removes a timing source as available synchronization
source for the selection process. As defined in ITU-T G.781i, lockout
commands are ac…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.7
fsSynceIfSignalFail
If the hold off timer expires and no SyncE packet was received till
then by the port, then the status of the port changes to signal fail
status. As defined in ITU-T standard G.781 Signal fail for a
synchronization sourc…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.8
fsSynceIfPktsTx
This object contains the total number of transmitted SyncE packets on
an interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.9
fsSynceIfPktsRx
This object contains the total number of received SyncE packets on an
interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.10
fsSynceIfPktsRxDropped
This object contains the total number of dropped SyncE packets on an
interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.11
fsSynceIfPktsRxErrored
This object contains the total number of SyncE packets whose
processing(decoding) resulted into error.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.12
fsSynceIfRowStatus
Used for creation/deletion of entries in the SyncE interface table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.13
fsSynceIfConfigSwitch
When ForcedSwitch is enabled on an interface, it can override the
currently selected synchronization source, provided the synchronization
source is enabled and not locked out. The forced switch overrides the
manual …
Enumerationr/w
Enumerated Values:
0none
1forceSwitch
2manualSwitch
 .1.3.6.1.4.1.29601.2.79.1.2.1.1.14