ALTIGA-SSL-STATS-MIB
The Altiga SSL Statistics MIB models counters and objects that are
of management interest for SSL.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
SSL: Secure Sockets Layer
- Source file
ALTIGA-SSL-STATS-MIB- Last revised
- Identity
altigaSslStatsMibModule- Base OID
1.3.6.1.4.1.3076.1.1.31.2
Imported Objects
| ALTIGA-GLOBAL-REG | alSslMibModule |
| ALTIGA-MIB | alSslGroup alStatsSsl |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the altiga MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALTIGA-SSL-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALTIGA-SSL-STATS-MIB::altigaSslStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTIGA-SSL-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTIGA-SSL-STATS-MIB::altigaSslStatsMibModule'
Objects (11)
Showing 11 of 11 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.3076.1.1.31.2 |
||
.1.3.6.1.4.1.3076.1.1.31.2.1 |
||
.1.3.6.1.4.1.3076.1.1.31.2.1.1 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.1 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.2 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.3 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.4 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.5 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.6 |
||
.1.3.6.1.4.1.3076.2.1.2.26.1.7 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ALTIGA-GLOBAL-REGaltiga
- ALTIGA-MIBaltiga
- SNMPv2-CONFrfc
- ALTIGA-SSL-STATS-MIBaltigaselected
Conformance Groups (1)
|
alSslStatsTotalSessions alSslStatsActiveSessions alSslStatsMaxSessions alSslStatsPreDecryptOctets alSslStatsPostDecryptOctets alSslStatsPreEncryptOctets alSslStatsPostEncryptOctets
The objects for SSL statistics.
|
.1.3.6.1.4.1.3076.2.1.1.1.26.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.3076.1.1.31.2.1.1.1The compliance statement for agents which
implement the Altiga SSL Statistics MIB.
implement the Altiga SSL Statistics MIB.
Required groups
| mandatory | altigaSslStatsGroup |