Standard view Table view

ALTIGA-PPPOE-STATS-MIB

        The Altiga PPPoE Statistics MIB models counters and objects that are
of management interest for PPPoE.
        
Acronyms
The following acronyms are used in this document:
        
  MIB:        Management Information Base
        
  PADI:       PPPoE Active Discovery Initiation
        
  PADO:       PPPoE Active Discovery Offer
        
  PADS:       PPPoE Active Discovery Session-confirmation
        
  PADT:       PPPoE Active Discovery Terminate
        
  PPPoE:      Point-to-Point Protocol over Ethernet
Source file
ALTIGA-PPPOE-STATS-MIB
Last revised
Identity
altigaPPPoEStatsMibModule
Base OID
1.3.6.1.4.1.3076.1.1.45.2
Imported Objects
ALTIGA-GLOBAL-REG alPPPoEMibModule
ALTIGA-MIB alPPPoEGroup alStatsPPPoE
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString MacAddress
Net-SNMP examples using the altiga MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALTIGA-PPPOE-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALTIGA-PPPOE-STATS-MIB::altigaPPPoEStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTIGA-PPPOE-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTIGA-PPPOE-STATS-MIB::altigaPPPoEStatsMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (28)
altigaPPPoEStatsMibModule
.1.3.6.1.4.1.3076.1.1.45.2
altigaPPPoEStatsMibConformance
.1.3.6.1.4.1.3076.1.1.45.2.1
altigaPPPoEStatsMibCompliances
.1.3.6.1.4.1.3076.1.1.45.2.1.1
alStatsPPPoEGlobal
.1.3.6.1.4.1.3076.2.1.2.40.1
alPPPoEStatsActiveSessions
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.3076.2.1.2.40.1.1
alPPPoEStatsTotalSessions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.1.2
alPPPoEStatsMaxSessions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.1.3
alPPPoEStatsIfTable
.1.3.6.1.4.1.3076.2.1.2.40.2
alPPPoEStatsIfEntry
alPPPoEStatsIfIndex
 .1.3.6.1.4.1.3076.2.1.2.40.2.1
alPPPoEStatsIfIndex
Integer32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.1
alPPPoEStatsIfPeerAddr
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.10
alPPPoEStatsIfSessionState
Enumeration
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.11
alPPPoEStatsIfVersion
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.12
alPPPoEStatsIfType
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.13
alPPPoEStatsIfConnectTime
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.14
alPPPoEStatsIfDuration
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.15
alPPPoEStatsIfPeerName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.16
alPPPoEStatsIfACCookie
OctetString
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.17
alPPPoEStatsIfHostUnique
OctetString
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.18
alPPPoEStatsIfRelaySessID
OctetString
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.19
alPPPoEStatsIfPADTRx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.2
alPPPoEStatsIfPADTTx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.3
alPPPoEStatsIfGenericErrorsRx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.4
alPPPoEStatsIfMalformedPacketsRx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.5
alPPPoEStatsIfPADITimeouts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.6
alPPPoEStatsIfPADRTimeouts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.7
alPPPoEStatsIfMultPADORx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.8
alPPPoEStatsIfSessionID
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3076.2.1.2.40.2.1.9
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ALTIGA-GLOBAL-REGaltiga
  3. ALTIGA-MIBaltiga
  4. SNMPv2-CONFrfc
  5. SNMPv2-TCrfc
  6. ALTIGA-PPPOE-STATS-MIBaltigaselected
Conformance Groups (1)
altigaPPPoEStatsGroup
alPPPoEStatsActiveSessions alPPPoEStatsTotalSessions alPPPoEStatsMaxSessions alPPPoEStatsIfIndex alPPPoEStatsIfPADTRx alPPPoEStatsIfPADTTx alPPPoEStatsIfGenericErrorsRx alPPPoEStatsIfMalformedPacketsRx alPPPoEStatsIfPADITimeouts alPPPoEStatsIfPADRTimeouts alPPPoEStatsIfMultPADORx alPPPoEStatsIfSessionID alPPPoEStatsIfPeerAddr alPPPoEStatsIfSessionState alPPPoEStatsIfVersion alPPPoEStatsIfType alPPPoEStatsIfConnectTime alPPPoEStatsIfDuration alPPPoEStatsIfPeerName alPPPoEStatsIfACCookie alPPPoEStatsIfHostUnique alPPPoEStatsIfRelaySessID
The objects for PPPoE Statistics.
 .1.3.6.1.4.1.3076.2.1.1.1.40.2
Compliance Statements (1)

OID .1.3.6.1.4.1.3076.1.1.45.2.1.1.1
The compliance statement for agents which
implement the Altiga PPPoE Statistics MIB.
Required groups
mandatory altigaPPPoEStatsGroup