Standard view Table view

ALTIGA-FILTER-STATS-MIB

        The Altiga Filter Statistics MIB models counters and objects that are
of management interest for filters.
        
Acronyms
The following acronyms are used in this document:
        
  ICMP:       Internet Control Message Protocol
        
  MIB:        Management Information Base
        
  Rx:         Received
        
  TCP:        Transmission Control Protocol
        
  Tx:         Transmitted
        
  UDP:        User Datagram Protocol
Source file
ALTIGA-FILTER-STATS-MIB
Last revised
Identity
altigaFilterStatsMibModule
Base OID
1.3.6.1.4.1.3076.1.1.14.2
Imported Objects
ALTIGA-GLOBAL-REG alFilterMibModule
ALTIGA-MIB alFilterGroup alStatsFilter
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks
Net-SNMP examples using the altiga MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALTIGA-FILTER-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALTIGA-FILTER-STATS-MIB::altigaFilterStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTIGA-FILTER-STATS-MIB' -M '/opt/observium/mibs/altiga:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTIGA-FILTER-STATS-MIB::altigaFilterStatsMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (22)
altigaFilterStatsMibModule
.1.3.6.1.4.1.3076.1.1.14.2
altigaFilterStatsMibConformance
.1.3.6.1.4.1.3076.1.1.14.2.1
altigaFilterStatsMibCompliances
.1.3.6.1.4.1.3076.1.1.14.2.1.1
alStatsFilterGlobal
.1.3.6.1.4.1.3076.2.1.2.9.1
alFilterStatsTable
.1.3.6.1.4.1.3076.2.1.2.9.2
alFilterStatsEntry
alFilterStatsInterfaceId
 .1.3.6.1.4.1.3076.2.1.2.9.2.1
alFilterStatsInterfaceId
Integer32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.1
alFilterStatsOutShortTcpHdr
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.10
alFilterStatsInShortUdpHdr
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.11
alFilterStatsOutShortUdpHdr
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.12
alFilterStatsInTcpFragDiscard
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.13
alFilterStatsOutTcpFragDiscard
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.14
alFilterStatsInIcmpFragDiscard
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.15
alFilterStatsOutIcmpFragDiscard
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.16
alFilterStatsStartTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.2
alFilterStatsInPktsFiltered
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.3
alFilterStatsOutPktsFiltered
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.4
alFilterStatsInPktsRx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.5
alFilterStatsOutPktsRx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.6
alFilterStatsInPktsTx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.7
alFilterStatsOutPktsTx
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.8
alFilterStatsInShortTcpHdr
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3076.2.1.2.9.2.1.9
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ALTIGA-GLOBAL-REGaltiga
  3. ALTIGA-MIBaltiga
  4. SNMPv2-CONFrfc
  5. ALTIGA-FILTER-STATS-MIBaltigaselected
Conformance Groups (1)
altigaFilterStatsGroup
alFilterStatsInterfaceId alFilterStatsStartTime alFilterStatsInPktsFiltered alFilterStatsOutPktsFiltered alFilterStatsInPktsRx alFilterStatsOutPktsRx alFilterStatsInPktsTx alFilterStatsOutPktsTx alFilterStatsInShortTcpHdr alFilterStatsOutShortTcpHdr alFilterStatsInShortUdpHdr alFilterStatsOutShortUdpHdr alFilterStatsInTcpFragDiscard alFilterStatsOutTcpFragDiscard alFilterStatsInIcmpFragDiscard alFilterStatsOutIcmpFragDiscard
The objects for filter statistics.
 .1.3.6.1.4.1.3076.2.1.1.1.9.2
Compliance Statements (1)

OID .1.3.6.1.4.1.3076.1.1.14.2.1.1.1
The compliance statement for agents which
implement the Altiga Filter Statistics MIB.
Required groups
mandatory altigaFilterStatsGroup