ALCATEL-STATIC-FRR-MIB Table View

This table contains a collection of incoming
segments to an LSR.

vRtrStaticFrrMplsInSegmentEntry row .1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1

An entry in this table represents one incoming
segment. An entry can be created by a network
administrator or an SNMP agent. The creator of the entry is
denoted by vRtrStaticFrrMplsInSegmentOwner. An entry in this…

Indexes

vRtrStaticFrrMplsInSegmentIfIndex vRtrStaticFrrMplsInSegmentLabel

Column	Syntax	OID
vRtrStaticFrrMplsInSegmentIfIndex This is a unique index for an entry in the StaticFrrMplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform lab…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.1
vRtrStaticFrrMplsInSegmentLabel The incoming label for this protected ingress segment.	MPLS-LSR-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.2
vRtrStaticFrrMplsInSegmentNPop The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.3
vRtrStaticFrrMplsInSegmentXCIndex Index into vRtrStaticFrrMplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect en…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.4
vRtrStaticFrrMplsInSegmentOwner Denotes the entity that created and is responsible for managing this segment.	MPLS-LSR-MIBMplsObjectOwnerr/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.5
vRtrStaticFrrMplsInSegmentRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.1.1.6

This table contains a representation of the outgoing
segments from an LSR.

vRtrStaticFrrMplsOutSegmentEntry row .1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1

An entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent. The object
vRtrStaticFrrMplsOutSegmentOwner indicates
the creator of this entry.

Indexes

vRtrStaticFrrMplsOutSegmentIndex

Column	Syntax	OID
vRtrStaticFrrMplsOutSegmentIndex This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index vRtrStaticFrrMplsXCTable to access entries for which no out-segment …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.1
vRtrStaticFrrMplsOutSegmentIfIndex This value contains the interface index of the outgoing protecting interface.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.2
vRtrStaticFrrMplsOutSegmentPushTopLabel This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.3
vRtrStaticFrrMplsOutSegmentTopLabel If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack.	MPLS-LSR-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.4
vRtrStaticFrrMplsOutSegmentNextHopIpAddrType Indicates whether the protecting next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.5
vRtrStaticFrrMplsOutSegmentNextHopIpv4Addr IPv4 Address of the protecting next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.6
vRtrStaticFrrMplsOutSegmentXCIndex Index into vRtrStaticFrrMplsXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect ent…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.7
vRtrStaticFrrMplsOutSegmentOwner Denotes the entity which created and is responsible for managing this segment.	MPLS-LSR-MIBMplsObjectOwnerr/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.8
vRtrStaticFrrMplsOutSegmentRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.3.1.9

This table specifies information for switching
between LSP segments.  It supports point-to-point
connections.  mplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from vRtrStaticFrrMplsXCTable.

vRtrStaticFrrMplsXCEntry row .1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1

A row in this table represents one backup cross-connect
entry. The following objects index it:

- cross-connect index vRtrStaticFrrMplsXCIndex that uniquely
identifies a backup cross-connect entry
- inter…

Indexes

vRtrStaticFrrMplsXCIndex vRtrStaticFrrMplsInSegmentIfIndex vRtrStaticFrrMplsInSegmentLabel vRtrStaticFrrMplsOutSegmentIndex

Column	Syntax	OID
vRtrStaticFrrMplsXCIndex Primary index for the conceptual row identifying a backing cross-connect segment on a transit LSR.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1.1
vRtrStaticFrrMplsXCOwner Denotes the entity that created and is responsible for managing this cross-connect.	MPLS-LSR-MIBMplsObjectOwnerr/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1.2
vRtrStaticFrrMplsXCRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1.3
vRtrStaticFrrMplsXCAdminStatus The desired operational status of this backup segment.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1.4
vRtrStaticFrrMplsXCOperStatus The actual operational status of this backup cross-connect.	Enumeration Enumerated Values: 1 up 2 down 4 unknown	.1.3.6.1.4.1.6486.800.1.2.1.53.1.1.5.1.5