ZhoneVdsl-MIB Table View

This table includes common attributes describing
both ends of the line.  It is required for all VDSL
physical interfaces.  VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97).

zhoneVdslLineEntry row .1.3.6.1.4.1.5504.5.13.1.1.1.1

An entry in the vdslLineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zhoneVdslLineCoding Specifies the VDSL coding type used on this line.	ZhoneVdslLineCodingType Type Values: 1 other 2 mcm 3 scm	.1.3.6.1.4.1.5504.5.13.1.1.1.1.1
zhoneVdslLineType Defines the type of VDSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object define…	Enumeration Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.4.1.5504.5.13.1.1.1.1.2
zhoneVdslLineConfProfile The value of this object identifies the row in the VDSL Line Configuration Profile Table, zhoneVdslLineConfProfileTable, which applies for this VDSL line, and channels if applicable. This object MUST be m…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.5504.5.13.1.1.1.1.3
zhoneVdslLineAlarmConfProfile The value of this object identifies the row in the VDSL Line Alarm Configuration Profile Table, zhoneVdslLineAlarmConfProfileTable, which applies to this VDSL line, and channels if applicable. This object…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.5504.5.13.1.1.1.1.4

This table provides one row for each Vtu.  Each row
contains the Physical Layer Parameters table for that
Vtu.  VDSL physical interfaces are those ifEntries where
ifType is equal to vdsl(97).

zhoneVdslPhysEntry row .1.3.6.1.4.1.5504.5.13.1.1.2.1

An entry in the vdslPhysTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide

Column	Syntax	OID
zhoneVdslPhysSide Identifies whether the transceiver is the Vtuc or Vtur.	ZhoneVdslLineEntity Type Values: 1 vtuc 2 vtur	.1.3.6.1.4.1.5504.5.13.1.1.2.1.1
zhoneVdslPhysInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.5504.5.13.1.1.2.1.2
zhoneVdslPhysInvVendorID The vendor ID code is a copy of the binary vendor identification field expressed as readable characters in hexadecimal notation.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.5504.5.13.1.1.2.1.3
zhoneVdslPhysInvVersionNumber The vendor specific version number sent by this Vtu as part of the initialization messages. It is a copy of the binary version number field expressed as readable characters in hexadecimal notation.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.5504.5.13.1.1.2.1.4
zhoneVdslPhysCurrSnrMgn Noise Margin as seen by this Vtu with respect to its received signal in 0.10dB. The effective range is -31.75 to +31.75 dB.	0.10dBmInteger32 Constraints: range: -127-127	.1.3.6.1.4.1.5504.5.13.1.1.2.1.5
zhoneVdslPhysCurrAtn Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu. The effective range is 0 to +63.75 dB.	0.10dBmUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.2.1.6
zhoneVdslPhysCurrStatus Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There are no defects on the line. 1 lossOfFram…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 lossOfSignalQuality 5 lossOfLink 6 dataInitFailure 7 configInitFailure 8 protocolInitFailure 9 noPeerVtuPresent	.1.3.6.1.4.1.5504.5.13.1.1.2.1.7
zhoneVdslPhysCurrOutputPwr Measured total output power transmitted by this VTU. This is the measurement that was reported during the last activation sequence.	0.1dBmInteger32 Constraints: range: 0-160	.1.3.6.1.4.1.5504.5.13.1.1.2.1.8
zhoneVdslPhysCurrAttainableRate Indicates the maximum currently attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are …	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.2.1.9
zhoneVdslPhysCurrLineRate Indicates the current data rate in steps of 1000 bits/second by the Vtu. This value will be less than or equal to vdslPhysCurrAttainableRate. Note: 1 kbps = 1000 bps.	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.2.1.10
zhoneVdslPhysCurrConnType Indicates current connection type. unknown(1) - could not determine connection type not-connected(2) - connection has not been established invalid(3) - unknown connection established adsl(4…	Enumeration Enumerated Values: 1 unknown 2 not-connected 3 invalid 4 adsl 5 adsl2 6 adsl2-annexm 7 adsl2plus 8 adsl2plus-annexm 9 vdsl1 10 vdsl2	.1.3.6.1.4.1.5504.5.13.1.1.2.1.12
zhoneVdslPhysCurrProfile Indicates current VDSL profile being used in the connection. This object is only valid for VDSL connections.	Enumeration Enumerated Values: 1 g993-2-8a 2 g993-2-8b 3 g993-2-8c 4 g993-2-8d 5 g993-2-12a 6 g993-2-12b 7 g993-2-17a 8 g993-2-30a 9 no-vdsl-connection	.1.3.6.1.4.1.5504.5.13.1.1.2.1.13
zhoneVdslPhysPhyRActive Phy Retransmit Rx Queue Active.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.13.1.1.2.1.14
zhoneVdslPhysGinpActive G.INP/ITU-G.998.4 feature active	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.13.1.1.2.1.15
zhoneVdslPhysTransportMode Transport mode, either ATM or PTM	Enumeration Enumerated Values: 1 atm 2 ptm	.1.3.6.1.4.1.5504.5.13.1.1.2.1.16

This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).

zhoneVdslChanEntry row .1.3.6.1.4.1.5504.5.13.1.1.3.1

An entry in the vdslChanTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide

Column	Syntax	OID
zhoneVdslChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent input bytes at the interleave…	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.3.1.1
zhoneVdslChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates.	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.3.1.2
zhoneVdslChanCurrTxRate Actual transmit data rate on this channel. Note: 1 kbps = 1000 bps.	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.3.1.3
zhoneVdslChanCurrTxSlowBurstProtect Actual level of impulse noise (burst) protection for an interleaved (slow) channel. This parameter is not applicable to fast channels. For fast channels, a value of zero shall be returned.	microsecondsUnsigned32 Constraints: range: 0-1275	.1.3.6.1.4.1.5504.5.13.1.1.3.1.4
zhoneVdslChanCurrTxFastFec Actual Forward Error Correction (FEC) redundancy related overhead for a fast channel. This parameter is not applicable to an interleaved (slow) channel. For interleaved channels, a value of zero shall be returned.	%Unsigned32 Constraints: range: 0-50	.1.3.6.1.4.1.5504.5.13.1.1.3.1.5

This table provides one row for each VDSL physical
interface.  VDSL physical interfaces are those ifEntries
where ifType is equal to vdsl(97).

zhoneVdslPerfDataEntry row .1.3.6.1.4.1.5504.5.13.1.1.4.1

An entry in the vdslPerfDataTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide

Column	Syntax	OID
zhoneVdslPerfDataValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.4.1.1
zhoneVdslPerfDataInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.4.1.2
zhoneVdslPerfDataLofs Count of seconds since the unit was last reset that there was Loss of Framing.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.3
zhoneVdslPerfDataLoss Count of seconds since the unit was last reset that there was Loss of Signal.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.4
zhoneVdslPerfDataLprs Count of seconds since the unit was last reset that there was Loss of Power.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.5
zhoneVdslPerfDataLols Count of seconds since the unit was last reset that there was Loss of Link.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.6
zhoneVdslPerfDataESs Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defects.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.7
zhoneVdslPerfDataSESs Count of Severely Errored Seconds since the unit was last reset.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.8
zhoneVdslPerfDataUASs Count of Unavailable Seconds since the unit was last reset.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.9
zhoneVdslPerfDataInits Count of the line initialization attempts since the unit was last reset. This count includes both successful and failed attempts.	occurrencesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.10
zhoneVdslPerfDataCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsInteger32 Constraints: range: 0-86399	.1.3.6.1.4.1.5504.5.13.1.1.4.1.11
zhoneVdslPerfDataCurr15MinLofs Count of seconds during this interval that there was Loss of Framing.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.12
zhoneVdslPerfDataCurr15MinLoss Count of seconds during this interval that there was Loss of Signal.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.13
zhoneVdslPerfDataCurr15MinLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.14
zhoneVdslPerfDataCurr15MinLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.15
zhoneVdslPerfDataCurr15MinESs Count of Errored Seconds during this interval. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defects.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.16
zhoneVdslPerfDataCurr15MinSESs Count of Severely Errored Seconds during this interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.17
zhoneVdslPerfDataCurr15MinUASs Count of Unavailable Seconds during this interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.18
zhoneVdslPerfDataCurr15MinInits Count of the line initialization attempts during this interval. This count includes both successful and failed attempts.	occurrencesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.19
zhoneVdslPerfData1DayValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.4.1.20
zhoneVdslPerfData1DayInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.4.1.21
zhoneVdslPerfDataCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsInteger32 Constraints: range: 0-86399	.1.3.6.1.4.1.5504.5.13.1.1.4.1.22
zhoneVdslPerfDataCurr1DayLofs Count of Loss of Framing (LOF) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.23
zhoneVdslPerfDataCurr1DayLoss Count of Loss of Signal (LOS) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.24
zhoneVdslPerfDataCurr1DayLprs Count of Loss of Power (LPR) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.25
zhoneVdslPerfDataCurr1DayLols Count of Loss of Link (LOL) Seconds since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.26
zhoneVdslPerfDataCurr1DayESs Count of Errored Seconds (ES) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.27
zhoneVdslPerfDataCurr1DaySESs Count of Severely Errored Seconds (SES) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.28
zhoneVdslPerfDataCurr1DayUASs Count of Unavailable Seconds (UAS) since the beginning of the current 1-day interval.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.29
zhoneVdslPerfDataCurr1DayInits Count of the line initialization attempts since the beginning of the current 1-day interval. This count includes both successful and failed attempts.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.30
zhoneVdslPhyrRetransmittedCodewords Retransmitted Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.31
zhoneVdslPhyrCorrectedRetransmittedCodewords Retransmitted corrected Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.32
zhoneVdslPhyrUncorrectableRetransmittedCodewords Retransmitted uncorrectable Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.33
zhoneVdslPhyrCurr15MinRetransmittedCodewords Current 15 minutes Retransmitted Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.34
zhoneVdslPhyrCurr15MinCorrectedRetransmittedCodewords Current 15 minutes Retransmitted Corrected Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.35
zhoneVdslPhyrCurr15MinUncorrectableRetransmittedCodewords Current 15 minutes Retransmitted Uncorrectable Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.36
zhoneVdslPhyrCurr1DayRetransmittedCodewords Current Day Retransmitted Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.37
zhoneVdslPhyrCurr1DayCorrectedRetransmittedCodewords Current Day Retransmitted Corrected Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.38
zhoneVdslPhyrCurr1DayUncorrectableRetransmittedCodewords Current Day Retransmitted Uncorrectable Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.39
zhoneVdslPhyrPrev1DayRetransmittedCodewords Previous Day Retransmitted Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.40
zhoneVdslPhyrPrev1DayCorrectedRetransmittedCodewords Previous Day Retransmitted Corrected Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.41
zhoneVdslPhyrPrev1DayUncorrectableRetransmittedCodewords Previous Day Retransmitted Uncorrectable Codewords	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.42
zhoneVdslGinpLeftrSecs LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Throughput dropped below the configured threshold.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.43
zhoneVdslGinpErrorFreeBits errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.44
zhoneVdslGinpMinEftr minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.45
zhoneVdslGinpCurr15MinLeftrSecs LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Throughput dropped below the configured threshold. This is the coun…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.46
zhoneVdslGinpCurr15MinErrorFreeBits errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for the current 15 minutes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.47
zhoneVdslGinpCurr15MinMinEftr minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the current 15 minutes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.48
zhoneVdslGinpCurr1DayLeftrSecs LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Throughput dropped below the configured threshold. This is the coun…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.49
zhoneVdslGinpCurr1DayErrorFreeBits errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for the current day.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.50
zhoneVdslGinpCurr1DayMinEftr minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the current day.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.4.1.51
zhoneVdslGinpPrev1DayLeftrSecs LEFTRS - This counter counts the number of seconds that experienced a Low Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error Free Throughput dropped below the configured threshold. This is the coun…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.4.1.52
zhoneVdslGinpPrev1DayErrorFreeBits errorFreeBits - This counter counts the number of bits that crossed the alpha1/beta1 interface (bits available to carry user payload). This is the count for the previous day.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.4.1.53
zhoneVdslGinpPrev1DayMinEftr minEFTR - This performance monitoring parameter records the lowest value of Error Free Throughput during the current interval. This is the count for the previous day.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.4.1.54

This table provides one row for each Vtu performance
data collection interval.  VDSL physical interfaces are
          
those ifEntries where ifType is equal to vdsl(97).

zhoneVdslPerfIntervalEntry row .1.3.6.1.4.1.5504.5.13.1.1.5.1

An entry in the vdslPerfIntervalTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide zhoneVdslPerfIntervalNumber

Column	Syntax	OID
zhoneVdslPerfIntervalNumber Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.5504.5.13.1.1.5.1.1
zhoneVdslPerfIntervalLofs Count of seconds in the interval when there was Loss of Framing.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.2
zhoneVdslPerfIntervalLoss Count of seconds in the interval when there was Loss of Signal.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.3
zhoneVdslPerfIntervalLprs Count of seconds in the interval when there was Loss of Power.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.4
zhoneVdslPerfIntervalLols Count of seconds in the interval when there was Loss of Link.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.5
zhoneVdslPerfIntervalESs Count of Errored Seconds (ES) in the interval. An Errored Second is a one-second interval containing one or more CRC anomalies, one or more LOS or LOF defects.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.6
zhoneVdslPerfIntervalSESs Count of Severely Errored Seconds in the interval.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.7
zhoneVdslPerfIntervalUASs Count of Unavailable Seconds in the interval.	secondsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.8
zhoneVdslPerfIntervalInits Count of the line initialization attempts during this interval. This count includes both successful and failed attempts.	HC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.5.1.9

This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.

zhoneVdslPerf1DayIntervalEntry row .1.3.6.1.4.1.5504.5.13.1.1.6.1

An entry in the vdslPerf1DayIntervalTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide zhoneVdslPerf1DayIntervalNumber

Column	Syntax	OID
zhoneVdslPerf1DayIntervalNumber History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.4.1.5504.5.13.1.1.6.1.1
zhoneVdslPerf1DayIntervalMoniSecs The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring dat…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.4.1.5504.5.13.1.1.6.1.2
zhoneVdslPerf1DayIntervalLofs Count of Loss of Frame (LOF) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.3
zhoneVdslPerf1DayIntervalLoss Count of Loss of Signal (LOS) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.4
zhoneVdslPerf1DayIntervalLprs Count of Loss of Power (LPR) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.5
zhoneVdslPerf1DayIntervalLols Count of Loss of Link (LOL) Seconds during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.6
zhoneVdslPerf1DayIntervalESs Count of Errored Seconds (ES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.7
zhoneVdslPerf1DayIntervalSESs Count of Severely Errored Seconds (SES) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.8
zhoneVdslPerf1DayIntervalUASs Count of Unavailable Seconds (UAS) during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.9
zhoneVdslPerf1DayIntervalInits Count of the line initialization attempts during the 1-day interval as measured by vdslPerf1DayIntervalMoniSecs. This count includes both successful and failed attempts.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.6.1.10

This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).

zhoneVdslChanPerfDataEntry row .1.3.6.1.4.1.5504.5.13.1.1.7.1

An entry in the vdslChanPerfDataTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide

Column	Syntax	OID
zhoneVdslChanValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.7.1.1
zhoneVdslChanInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	intervalsInteger32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.7.1.2
zhoneVdslChanFixedOctets Count of corrected octets since the unit was last reset.	octetsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.3
zhoneVdslChanBadBlks Count of uncorrectable blocks since the unit was last reset.	blocksSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.4
zhoneVdslChanCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsInteger32 Constraints: range: 0-86399	.1.3.6.1.4.1.5504.5.13.1.1.7.1.5
zhoneVdslChanCurr15MinFixedOctets Count of corrected octets in this interval.	octetsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.6
zhoneVdslChanCurr15MinBadBlks Count of uncorrectable blocks in this interval.	blocksSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.7
zhoneVdslChan1DayValidIntervals Valid Intervals per definition found in HC-PerfHist-TC-MIB.	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.7.1.8
zhoneVdslChan1DayInvalidIntervals Invalid Intervals per definition found in HC-PerfHist-TC-MIB.	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.13.1.1.7.1.9
zhoneVdslChanCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsInteger32 Constraints: range: 0-86399	.1.3.6.1.4.1.5504.5.13.1.1.7.1.10
zhoneVdslChanCurr1DayFixedOctets Count of corrected octets since the beginning of the current 1-day interval.	octetsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.11
zhoneVdslChanCurr1DayBadBlks Count of uncorrectable blocks since the beginning of the current 1-day interval.	blocksSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.13.1.1.7.1.12

This table provides one row for each Vtu channel data
collection interval.  VDSL channel interfaces are those
ifEntries where ifType is equal to interleave(124) or
fast(125).

zhoneVdslChanIntervalEntry row .1.3.6.1.4.1.5504.5.13.1.1.8.1

An entry in the vdslChanIntervalTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide zhoneVdslChanIntervalNumber

Column	Syntax	OID
zhoneVdslChanIntervalNumber Performance Data Interval number 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2 to 96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.5504.5.13.1.1.8.1.1
zhoneVdslChanIntervalFixedOctets Count of corrected octets in this interval.	octetsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.8.1.2
zhoneVdslChanIntervalBadBlks Count of uncorrectable blocks in this interval.	blocksHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.4.1.5504.5.13.1.1.8.1.3

This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.

zhoneVdslChan1DayIntervalEntry row .1.3.6.1.4.1.5504.5.13.1.1.9.1

An entry in the vdslChan1DayIntervalTable.

Indexes

IF-MIBifIndex zhoneVdslPhysSide zhoneVdslChan1DayIntervalNumber

Column	Syntax	OID
zhoneVdslChan1DayIntervalNumber History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2 to 30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.4.1.5504.5.13.1.1.9.1.1
zhoneVdslChan1DayIntervalMoniSecs The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring dat…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.4.1.5504.5.13.1.1.9.1.2
zhoneVdslChan1DayIntervalFixedOctets Count of corrected octets in this interval.	octetsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.4.1.5504.5.13.1.1.9.1.3
zhoneVdslChan1DayIntervalBadBlks Count of uncorrectable blocks in this interval.	blocksHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.4.1.5504.5.13.1.1.9.1.4

This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
          
Entries in this table MUST be maintained in a
persistent manner.

zhoneVdslLineConfProfileEntry row .1.3.6.1.4.1.5504.5.13.1.1.11.1

Each entry consists of a list of parameters that
represents the configuration of a VDSL line.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific…

Indexes

IF-MIBifIndex

Column	Syntax	OID
zhoneVdslLineConfProfileName This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this docu…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.5504.5.13.1.1.11.1.1
zhoneVdslLineConfDownRateMode Specifies the rate selection behavior for the line in the downstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line at initialization only dynamic(3) …	Enumerationr/w Enumerated Values: 1 manual 2 adapt-at-init 3 dynamic	.1.3.6.1.4.1.5504.5.13.1.1.11.1.2
zhoneVdslLineConfUpRateMode Specifies the rate selection behavior for the line in the upstream direction. manual(1) forces the rate to the configured rate adaptAtInit(2) adapts the line at initialization only dynamic(3) …	Enumerationr/w Enumerated Values: 1 manual 2 adapt-at-init 3 dynamic	.1.3.6.1.4.1.5504.5.13.1.1.11.1.3
zhoneVdslLineConfDownMaxPwr Specifies the maximum aggregate downstream power level in the range -5.0 to 20.0 dBm.	0.10dBmInteger32r/w Constraints: range: -50-200	.1.3.6.1.4.1.5504.5.13.1.1.11.1.4
zhoneVdslLineConfUpMaxPwr Specifies the maximum aggregate upstream power level in the range -13.0 to 20.0 dBm.	0.10dBmInteger32r/w Constraints: range: -130-200	.1.3.6.1.4.1.5504.5.13.1.1.11.1.5
zhoneVdslLineConfDownMaxSnrMgn Specifies the maximum downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB.	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.6
zhoneVdslLineConfDownMinSnrMgn Specifies the minimum downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB.	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.7
zhoneVdslLineConfDownTargetSnrMgn Specifies the target downstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initial…	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.8
zhoneVdslLineConfUpMaxSnrMgn Specifies the maximum upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB.	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.9
zhoneVdslLineConfUpMinSnrMgn Specifies the minimum upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB.	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.10
zhoneVdslLineConfUpTargetSnrMgn Specifies the target upstream Signal/Noise Margin in units of 0.10 dB, for a range of 0 to 31.0 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initiali…	0.10dBmUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.11
zhoneVdslLineConfDownFastMaxDataRate Specifies the maximum downstream fast channel data rate in steps of 1000 bits/second.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.12
zhoneVdslLineConfDownFastMinDataRate Specifies the minimum downstream fast channel data rate in steps of 1000 bits/second.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.13
zhoneVdslLineConfDownSlowMaxDataRate Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and…	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.14
zhoneVdslLineConfDownSlowMinDataRate Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and…	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.15
zhoneVdslLineConfUpFastMaxDataRate Specifies the maximum upstream fast channel data rate in steps of 1000 bits/second. The maximum aggregate upstream transmit speed of the line can be derived from the sum of maximum upstream fast and slow …	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.16
zhoneVdslLineConfUpFastMinDataRate Specifies the minimum upstream fast channel data rate in steps of 1000 bits/second. The minimum aggregate upstream transmit speed of the line can be derived from the sum of minimum upstream fast and slow …	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.17
zhoneVdslLineConfUpSlowMaxDataRate Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.18
zhoneVdslLineConfUpSlowMinDataRate Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.19
zhoneVdslLineConfDownRateRatio For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This object specifies the ratio of the allocation of the excess data …	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.5504.5.13.1.1.11.1.20
zhoneVdslLineConfUpRateRatio For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is controlled by the object. This object specifies the ratio of the allocation of the excess data …	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.5504.5.13.1.1.11.1.21
zhoneVdslLineConfDownMaxInterDelay Specifies the maximum interleave delay for the downstream slow channel.	millisecondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.22
zhoneVdslLineConfUpMaxInterDelay Specifies the maximum interleave delay for the upstream slow channel.	millisecondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.23
zhoneVdslLineConfDownPboControl Downstream power backoff (PBO) control for this line. For transceivers which do not support downstream PBO control, this object MUST be fixed at disabled(1). If auto(2) is selected, the transceiver will automatically a…	Enumerationr/w Enumerated Values: 1 disabled 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.24
zhoneVdslLineConfUpPboControl Upstream power backoff (PBO) control for this line. For transceivers which do not support upstream PBO control, this object MUST be fixed at disabled(1). If auto(2) is selected, the transceiver will automatically adjus…	Enumerationr/w Enumerated Values: 1 disabled 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.25
zhoneVdslLineConfDownPboLevel Specifies the downstream backoff level to be used when vdslLineConfDownPboControl = manual(3).	0.25dBUnsigned32r/w Constraints: range: 0-160	.1.3.6.1.4.1.5504.5.13.1.1.11.1.26
zhoneVdslLineConfUpPboLevel Specifies the upstream backoff level to be used when vdslLineConfUpPboControl = manual(3).	0.25dBUnsigned32r/w Constraints: range: 0-160	.1.3.6.1.4.1.5504.5.13.1.1.11.1.27
zhoneVdslLineConfDeploymentScenario The VDSL line deployment scenario. When using fttCab(1), the VTU-C is located in a street cabinet. When using fttEx(2), the VTU-C is located at the central office. Changes to this value will have no effect on the tran…	Enumerationr/w Enumerated Values: 1 fttCab 2 fttEx 3 other	.1.3.6.1.4.1.5504.5.13.1.1.11.1.28
zhoneVdslLineConfAdslPresence Indicates presence of ADSL service in the associated cable bundle/binder. none(1) indicates no ADSL service in the bundle adslOverPots(2) indicates ADSL service over POTS is presen…	Enumerationr/w Enumerated Values: 1 none 2 adslOverPots 3 adslOverISDN	.1.3.6.1.4.1.5504.5.13.1.1.11.1.29
zhoneVdslLineConfApplicableStandard The VDSL standard to be used for the line. ansi(1) indicates ANSI standard etsi(2) indicates ETSI standard itu(3) indicates ITU standard other(4) indicates a standard other than the ab…	Enumerationr/w Enumerated Values: 1 ansi 2 etsi 3 itu 4 other	.1.3.6.1.4.1.5504.5.13.1.1.11.1.30
zhoneVdslLineConfBandPlan The VDSL band plan to be used for the line. bandPlan997(1) is to be used for ITU-T G.993.1 Bandplan-B ETSI Bandplan ANSI Plan 997 bandPlan998(2) is to be used for ITU-T …	Enumerationr/w Enumerated Values: 1 bandPlan997 2 bandPlan998 3 bandPlanFx 4 other 5 bandPlan997-2 6 bandPlan997-3 7 bandPlan998-2 8 bandPlan998-3 9 bandPlan998-17-6 10 fx-2 11 fx-3 12 china-a-2 13 china-a-3 14 china-b-2 15 china-b-3	.1.3.6.1.4.1.5504.5.13.1.1.11.1.31
zhoneVdslLineConfBandPlanFx The frequency limit between bands D2 and U2 when zhoneVdslLineConfBandPlan is set to bandPlanFx(3).	kHzUnsigned32r/w Constraints: range: 3750-12000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.32
zhoneVdslLineConfBandOptUsage Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). unused(1) indicates Opt is unused upstream(2) indicates Opt usage is for upstream downstream(3) indicates Opt usage …	Enumerationr/w Enumerated Values: 1 unused 2 upstream 3 downstream 4 upstream-forced	.1.3.6.1.4.1.5504.5.13.1.1.11.1.33
zhoneVdslLineConfUpPsdTemplate This object has been modified by Zhone. The upstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted PSD within the internationally standa…	Enumerationr/w Enumerated Values: 3 ansi-fftex-m1 4 ansi-fftex-m2 5 ansi-fftcab-m1 6 fftcab-m2 7 etsi-m1 8 etsi-m2 9 psd-custom	.1.3.6.1.4.1.5504.5.13.1.1.11.1.34
zhoneVdslLineConfDownPsdTemplate This object has been modified by Zhone. The downstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted PSD within the internationally stan…	Enumerationr/w Enumerated Values: 3 ansi-fftex-m1 4 ansi-fftex-m2 5 ansi-fftcab-m1 6 fftcab-m2 7 fftcab-m1-adsl 8 fftcab-m1-adslplus 9 fftcab-m2-adsl 10 fftcab-m2-adslplus 11 etsi-pexp1-m1 12 etsi-pexp1-m2 13 etsi-pexp2-m1 14 etsi-pexp2-m2 15 psd-custom 16 etsi-pexm2-sample1 17 etsi-pexm2-sample2 18 etsi-pexm2-sample3 19 etsi-pexm2-sample4 20 etsi-pcab-m1 21 etsi-pcab-m2	.1.3.6.1.4.1.5504.5.13.1.1.11.1.35
zhoneVdslLineConfHamBandMask The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio…	Bitsr/w Enumerated Values: 0 customNotch1 1 customNotch2 2 amateurBand30m 3 amateurBand40m 4 amateurBand80m 5 amateurBand160m	.1.3.6.1.4.1.5504.5.13.1.1.11.1.36
zhoneVdslLineConfCustomNotch1Start Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Start MUST be less than or equal to vdslLineConfCustomNotch1Stop.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.11.1.37
zhoneVdslLineConfCustomNotch1Stop Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Stop MUST be greater than or equal to vdslLineConfCustomNotch1Start.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.11.1.38
zhoneVdslLineConfCustomNotch2Start Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Start MUST be less than or equal to vdslLineConfCustomNotch2Stop.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.11.1.39
zhoneVdslLineConfCustomNotch2Stop Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Stop MUST be greater than or equal to vdslLineConfCustomNotch2Start.	kHzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.13.1.1.11.1.40
zhoneVdslLineConfDownTargetSlowBurst Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel.	microsecondsUnsigned32r/w Constraints: range: 0-1275	.1.3.6.1.4.1.5504.5.13.1.1.11.1.41
zhoneVdslLineConfUpTargetSlowBurst Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel.	microsecondsUnsigned32r/w Constraints: range: 0-1275	.1.3.6.1.4.1.5504.5.13.1.1.11.1.42
zhoneVdslLineConfDownMaxFastFec This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel.	%Unsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.5504.5.13.1.1.11.1.43
zhoneVdslLineConfUpMaxFastFec This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a fast channel.	%Unsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.5504.5.13.1.1.11.1.44
zhoneVdslLineConfLineType This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be oth…	Enumerationr/w Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.4.1.5504.5.13.1.1.11.1.45
zhoneVdslLineConfProfRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profil…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5504.5.13.1.1.11.1.47
zhoneVdslLineConfTransmissionMode The transmission standard to be used for the line.	Enumerationr/w Enumerated Values: 1 autoNegotiateMode 2 vdslMode 3 vdsl2Mode 4 adsl2PlusMode 5 adsl2Mode 6 gdmtMode	.1.3.6.1.4.1.5504.5.13.1.1.11.1.48
zhoneVdslLineConfVdsl2Profile The VDSL2 standard to be used for the line.	Enumerationr/w Enumerated Values: 1 g993-2-8a 2 g993-2-8b 3 g993-2-8c 4 g993-2-8d 5 g993-2-12a 6 g993-2-12b 7 g993-2-17a 8 g993-2-30a	.1.3.6.1.4.1.5504.5.13.1.1.11.1.49
zhoneVdslLineConfVdslMode Controls which VDSL modes are available on the line.	Enumerationr/w Enumerated Values: 1 standard 2 long-reach-8k 3 r8k 4 std-8k 5 lr-8k 6 std-lr 7 std-lr-8k	.1.3.6.1.4.1.5504.5.13.1.1.11.1.50
zhoneVdslLineConfPboElectricalOverride Override electrical length estimated by VUTU_C. The special value 256 means do not perform override.	.5 dBm/MhzInteger32r/w Constraints: range: 0-256	.1.3.6.1.4.1.5504.5.13.1.1.11.1.51
zhoneVdslLineConfAutoModeCrtrn Determines the policy to select optimal mode of oepration.	Enumerationr/w Enumerated Values: 1 crtrn-chip-prop 2 optimize-us 3 optimize-ds	.1.3.6.1.4.1.5504.5.13.1.1.11.1.52
zhoneVdslLineConfNetworkTimingRef Enable/disable reference clock source.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.53
zhoneVdslLineConfAdslBandMode Specifies whether the XDSL can use the ADSL spectrum or not.	Enumerationr/w Enumerated Values: 1 allowed 2 not-allowed	.1.3.6.1.4.1.5504.5.13.1.1.11.1.54
zhoneVdslLineConfAdslBandModeEndFreq Specifies the ADSL band end frequency when the ADSL band usage is not allowed.	kHzInteger32r/w Constraints: range: 276-2208	.1.3.6.1.4.1.5504.5.13.1.1.11.1.55
zhoneVdslLineConfSeltEchoMeasurementTime Contains the SELT echo measurement time	secsInteger32r/w Constraints: range: 5-240	.1.3.6.1.4.1.5504.5.13.1.1.11.1.56
zhoneVdslLineConfSeltNoiseMeasurementTime Contains the SELT noise measurement time.	secsInteger32r/w Constraints: range: 5-240	.1.3.6.1.4.1.5504.5.13.1.1.11.1.57
zhoneVdslLineConfSeltAgc Contains the SELT AGC gain value.	1 dBmInteger32r/w Constraints: range: -100-100	.1.3.6.1.4.1.5504.5.13.1.1.11.1.58
zhoneVdslLineConfDownTrellis Enables/disables downstream Trellis coding.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.59
zhoneVdslLineConfUpTrellis Enables/disables upstream Trellis coding.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.60
zhoneVdslLineConfDownMaxAggregateTxPwr Maximum total power that is allowed to be transmitted in the downstream direction.	Enumerationr/w Enumerated Values: 4 unlimited	.1.3.6.1.4.1.5504.5.13.1.1.11.1.61
zhoneVdslLineConfUpMaxAggregateTxPwr Maximum total power that is allowed to be transmitted in the upstream direction.	Enumerationr/w Enumerated Values: 4 unlimited	.1.3.6.1.4.1.5504.5.13.1.1.11.1.62
zhoneVdslLineConfDownMaxPsd The maximum power spectral density level allowed on the line at the transmitter output downstream for initialization and showtime signals.	.1 dBm/HzInteger32r/w Constraints: range: -955-0	.1.3.6.1.4.1.5504.5.13.1.1.11.1.63
zhoneVdslLineConfUpMaxPsd The maximum power spectral density level allowed on the line at the transmitter output upstream for initialization and showtime signals.	.1 dBm/HzInteger32r/w Constraints: range: -955-0	.1.3.6.1.4.1.5504.5.13.1.1.11.1.64
zhoneVdslLineConfDownPsdShape Maximum transmit PSD allowed in the downstream channel on a VDSL2 line.	Enumerationr/w Enumerated Values: 1 custom-psd 2 region-a-psd 3 region-c-psd 4 region-b-m1-a-psd 5 region-b-m1-b-psd 6 region-b-m1-us0-psd 7 region-b-m2-a-psd 8 region-b-m2-m-psd 9 region-b-m2-b-psd 10 region-b-m2-us0-psd	.1.3.6.1.4.1.5504.5.13.1.1.11.1.65
zhoneVdslLineConfUpPsdShape Maximum transmit PSD allowed in the upstream channel on a VDSL2 line.	Enumerationr/w Enumerated Values: 1 custom-psd 2 region-a-psd 3 region-c-psd 4 region-b-m1-a-psd 5 region-b-m1-b-psd 6 region-b-m1-us0-psd 7 region-b-m2-a-psd 8 region-b-m2-m-psd 9 region-b-m2-b-psd 10 region-b-m2-us0-psd	.1.3.6.1.4.1.5504.5.13.1.1.11.1.66
zhoneVdslLineConfDownVirtualNoiseSnrMode Downstream virtual noise SNR mode on a VDSL2 line.	Enumerationr/w Enumerated Values: 1 mode1 2 mode2 3 mode3	.1.3.6.1.4.1.5504.5.13.1.1.11.1.67
zhoneVdslLineConfUpVirtualNoiseSnrMode Upstream virtual noise SNR mode on a VDSL2 line.	Enumerationr/w Enumerated Values: 1 mode1 2 mode2 3 mode3	.1.3.6.1.4.1.5504.5.13.1.1.11.1.68
zhoneVdslLineConfDownErasureDetectionFast Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream fast channel.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.69
zhoneVdslLineConfUpErasureDetectionFast Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream fast channel.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.70
zhoneVdslLineConfDownErasureDetectionInterleave Indicates whether the erasure detection mechanism should be enabled or disabled in the downstream slow channel (interleave).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.71
zhoneVdslLineConfUpErasureDetectionInterleave Indicates whether the erasure detection mechanism should be enabled or disabled in the uptream slow channel (interleave).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.72
zhoneVdslLineConfDownGhsA43TonePwr Determines the mode of the downstream tones power used during handshake, during A43 mode.	Enumerationr/w Enumerated Values: 1 default 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.73
zhoneVdslLineConfDownGhsB43TonePwr Determines the mode of the downstream tones power used during handshake, during B43 mode.	Enumerationr/w Enumerated Values: 1 default 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.74
zhoneVdslLineConfDownGhsA43cTonePwr Determines the mode of the downstream tones power used during handshake, during A43c mode.	Enumerationr/w Enumerated Values: 1 default 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.75
zhoneVdslLineConfDownGhsV43TonePwr Determines the mode of the downstream tone power used during handshake, during V43 mode.	Enumerationr/w Enumerated Values: 1 default 2 auto 3 manual	.1.3.6.1.4.1.5504.5.13.1.1.11.1.76
zhoneVdslLineConfDownGhsA43TonePwrMaxLvl Determines the maximum power of downstream tones used, in manual mode, during handshake in A43 mode. A value of -99 indicates no power used.	0.5 dBm/HzInteger32r/w Constraints: range: -99--40	.1.3.6.1.4.1.5504.5.13.1.1.11.1.77
zhoneVdslLineConfDownGhsB43TonePwrMaxLvl Determines the maximum power of downstream tones used, in manual mode, during handshake in B43 mode. A value of -99 indicates no power used.	0.5 dBm/HzInteger32r/w Constraints: range: -99--40	.1.3.6.1.4.1.5504.5.13.1.1.11.1.78
zhoneVdslLineConfDownGhsA43cTonePwrMaxLvl Determines the maximum power of downstream tones used, in manual mode, during handshake in A43c mode. A value of -99 indicates no power used.	0.5 dBm/HzInteger32r/w Constraints: range: -99--40	.1.3.6.1.4.1.5504.5.13.1.1.11.1.79
zhoneVdslLineConfDownGhsV43TonePwrMaxLvl Determines the maximum power of downstream tones used, in manual mode, during handshake in V43 mode. A value of -99 indicates no power used.	0.5 dBm/HzInteger32r/w Constraints: range: -99--40	.1.3.6.1.4.1.5504.5.13.1.1.11.1.80
zhoneVdslLineConfDownRsCoding Parameter to enable/disable RS Coding in downstream channel.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.81
zhoneVdslLineConfUpRsCoding Parameter to enable/disable RS Coding in upsream channel.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.82
zhoneVdslLineConfUpPboPsdTemplate Specifies the maximum received PSD allowed in the upstream channel on the VDSLx line.	Enumerationr/w Enumerated Values: 1 ansi-a 2 ansi-f 3 etsi-a 4 etsi-b 5 etsi-c 6 etsi-d 7 etsi-e 8 etsi-f 9 custom 10 ab-param	.1.3.6.1.4.1.5504.5.13.1.1.11.1.83
zhoneVdslLineConfUpPboPsdParamA1 Upstream power backoff PSD parameter A1. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 4000-8589	.1.3.6.1.4.1.5504.5.13.1.1.11.1.84
zhoneVdslLineConfUpPboPsdParamA2 Upstream power backoff PSD parameter A2. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 4000-8589	.1.3.6.1.4.1.5504.5.13.1.1.11.1.85
zhoneVdslLineConfUpPboPsdParamB1 Upstream power backoff PSD parameter B1. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 0-8589	.1.3.6.1.4.1.5504.5.13.1.1.11.1.86
zhoneVdslLineConfUpPboPsdParamB2 Upstream power backoff PSD parameter B2. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 0-8589	.1.3.6.1.4.1.5504.5.13.1.1.11.1.87
zhoneVdslLineConfDownDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.88
zhoneVdslLineConfDownUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.89
zhoneVdslLineConfDownMinDownshiftTime Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.5504.5.13.1.1.11.1.90
zhoneVdslLineConfDownMinUpshiftTime Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.5504.5.13.1.1.11.1.91
zhoneVdslLineConfUpDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.92
zhoneVdslLineConfUpUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.5504.5.13.1.1.11.1.93
zhoneVdslLineConfUpMinDownshiftTime Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.5504.5.13.1.1.11.1.94
zhoneVdslLineConfUpMinUpshiftTime Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.5504.5.13.1.1.11.1.95
zhoneVdslLineConfDownMinTxThresholdAlarm Minimum CO Tx Sync rate threshold alarm. If set to 0, this field is disregarded. Otherwise, if Tx Sync rate falls below this value, a trap and alarm will be issued	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.96
zhoneVdslLineConfUpMinTxThresholdAlarm Minimum CPE Tx Sync rate threshold alarm. If set to 0, this field is disregarded. Otherwise, if Tx Sync rate falls below this value, a trap and alarm will be issued	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.97
zhoneVdslLineConfPotsBypassRelayMaxDuration The maximum duration in seconds that an Adsl Pots Low Pass Filter Bypass Relay will remain active (meaning closed/energized). As a fail-safe mechanism, the relay will automatically return a line back to normal operation…	secsInteger32r/w Constraints: range: 1-300	.1.3.6.1.4.1.5504.5.13.1.1.11.1.98
zhoneVdslLineConfDMTConfMode Discrete Multi-Tone parameter that selects whether there is overlap (echoCancel) or no overlap (freqDivMux) of bins.	Enumerationr/w Enumerated Values: 1 echocancel 2 freqdivmux	.1.3.6.1.4.1.5504.5.13.1.1.11.1.99
zhoneVdslLineConfDownBitSwap Enable or disable downstream bit swap.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.5504.5.13.1.1.11.1.100
zhoneVdslLineConfUpBitSwap Enable or disable upstream bit swap.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.5504.5.13.1.1.11.1.101
zhoneVdslLineConfAdslAnnexMModeEnabled This object indicates whether Annex-M mode is enabled on the Adsl modem. If this object is set to 'true' then Annex-M mode is enabled. If it is set to 'false then Annex-M mode is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.13.1.1.11.1.102
zhoneVdslLineConfAdslAnnexMPsdMask This object specifies the maximum transmit PSD allowed in the downstream channel on an BIS Annex-M line.	Enumerationr/w Enumerated Values: 1 eu64 2 eu60 3 eu56 4 eu52 5 eu48 6 eu44 7 eu40 8 eu36 9 eu32 10 all	.1.3.6.1.4.1.5504.5.13.1.1.11.1.103
zhoneVdslLineConfUs0BoundaryTone This object configures the upper boundary of US0. US0 is used in long reach mode when there is no more capacity in US1. The switchover is typically around 3500 feet.	Enumerationr/w Enumerated Values: 1 d32 2 d36 3 d40 4 d44 5 d48 6 d52 7 d56 8 d64	.1.3.6.1.4.1.5504.5.13.1.1.11.1.104
zhoneVdslLineConfDownInp The minimum impulse noise protection for the downstream bearer channel expressed in symbols. One symbol equals 250 uS.	Enumerationr/w Enumerated Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteenSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.5504.5.13.1.1.11.1.105
zhoneVdslLineConfUpInp The minimum impulse noise protection for the upstream bearer channel expressed in symbols. One symbol equals 250 uS.	Enumerationr/w Enumerated Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 fourSymbols 6 eightSymbols 7 sixteenSymbols 8 threeSymbols 9 fiveSymbols 10 sixSymbols 11 sevenSymbols 12 nineSymbols 13 tenSymbols 14 elevenSymbols 15 twelveSymbols 16 thirteenSymbols 17 fourteenSymbols 18 fifteenSymbols	.1.3.6.1.4.1.5504.5.13.1.1.11.1.106
zhoneVdslLineConfDownMaxInterleavingDelay The maximum inteleaving delay in the downstream direction. A value of zero indicates no delay introduced.	millisecondsInteger32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.107
zhoneVdslLineConfUpMaxInterleavingDelay The maximum inteleaving delay in the upstream direction. A value of zero indicates no delay introduced.	millisecondsInteger32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.108
zhoneVdslLineConfDownPsdMaskEnable This object selects the Psd Mask in the downstream direction. 'standard' : use the PSD Mask specified in the object zhoneVdslLineConfDownPsdSelect 'mod' : use the pr…	Enumerationr/w Enumerated Values: 2 standard 3 mod 4 modFallback	.1.3.6.1.4.1.5504.5.13.1.1.11.1.109
zhoneVdslLineConfUpPsdMaskEnable This object selects the Psd Mask in the upstream direction. 'standard' : use the PSD Mask specified in the object zhoneVdslLineConfDownPsdSelect 'mod' : use the pre-…	Enumerationr/w Enumerated Values: 2 standard 3 mod 4 modFallback	.1.3.6.1.4.1.5504.5.13.1.1.11.1.110
zhoneVdslLineConfDownPsdMaskSelect This object selects one of the standards based PSD mask for the downstream direction. The object zhoneVdslLineConfDownPsdMaskEnable must be set to 'standard' for this object to be active.	Enumerationr/w Enumerated Values: 1 custom 2 customMOD 3 dmtPSDCOMSK2 4 dmtPSDFLATMSK 5 dmtPSDCABMSK2 6 dmtPSDCOMSK2RFI 7 dmtPSDFLATMSKRFI 8 dmtPSDCABMSK2RFI 9 dmtPSDADSL2NONOVLPM1 10 dmtPSDADSL2NONOVLPM2 11 dmtPSDADSL2NONOVLPFLAT 12 g993RegionC 13 g993RegionA 14 g993RegionA-E17a-D-32 15 g993RegionA-E17a-D-48 16 g993RegionA-E17a-D-64 17 g993RegionA-E17a-D-128 18 g998RegionB-M1x-A 19 g998RegionB-M1x-B 20 g998RegionB-M1x-NUS0 21 g998RegionB-M2x-A 22 g998RegionB-M2x-M 23 g998RegionB-M2x-B 24 g998RegionB-M2x-NUS0 25 g998RegionB-E17-M2x-NUS0 26 g998RegionB-E17-M2x-NUS0-M 27 g998RegionB-ADE17-M2x-NUS0-M 28 g998RegionB-ADE17-M2x-A 29 g998RegionB-ADE17-M2x-B 30 g998RegionB-E30-M2x-NUS0 31 g998RegionB-E30-M2x-NUS0-M 32 g998RegionB-ADE30-M2x-NUS0-M 33 g998RegionB-ADE30-M2x-NUS0-A 34 g998RegionB-NONSTD-E17-M2x 35 g998RegionB-NONSTD-E17-M2x-M 36 g997RegionB-M1c-A-7 37 g997RegionB-M1x-M-8 38 g997RegionB-M1x-M 39 g997RegionB-M2x-M-8 40 g997RegionB-M2x-A 41 g997RegionB-M2x-M 42 g997RegionB-HPE17-M1-NUS0 43 g997RegionB-HPE30-M1-NUS0 44 g997RegionB-E17-M2x-A 45 g997RegionB-E30-M2x-NUS0	.1.3.6.1.4.1.5504.5.13.1.1.11.1.111
zhoneVdslLineConfUpPsdMaskSelect This object selects one of the standards based PSD mask for the upstream direction. The object zhoneVdslLineConfUpPsdMaskEnable must be set to 'standard' for this object to be active.	Enumerationr/w Enumerated Values: 1 custom 2 g993J-ADLU-32 3 g993J-ADLU-36 4 g993J-ADLU-40 5 g993J-ADLU-44 6 g993J-ADLU-48 7 g993J-ADLU-52 8 g993J-ADLU-60 9 g993J-ADLU-64 10 g993JM-EU-32 11 g993JM-EU-36 12 g993JM-EU-40 13 g993JM-EU-44 14 g993JM-EU-48 15 g993JM-EU-52 16 g993JM-EU-60 17 g993JM-EU-64 18 dmtExtended 19 dmtJJ100 20 dmtStandard 21 g993RegionA-EU-32 22 g993RegionA-EU-36 23 g993RegionA-EU-40 24 g993RegionA-EU-44 25 g993RegionA-EU-48 26 g993RegionA-EU-52 27 g993RegionA-EU-56 28 g993RegionA-EU-60 29 g993RegionA-EU-64 30 g998RegionB-M1x-A 31 g998RegionB-M1x-B 32 g998RegionB-M1x-NUS0 33 g998RegionB-M2x-A 34 g998RegionB-M2x-M 35 g998RegionB-M2x-B 36 g998RegionB-M2x-NUS0 37 g998RegionB-E17-M2x-NUS0 38 g998RegionB-E17-M2x-NUS0-M 39 g998RegionB-ADE17-M2x-NUS0-M 40 g998RegionB-ADE17-M2x-A 41 g998RegionB-ADE17-M2x-B 42 g998RegionB-E30-M2x-NUS0 43 g998RegionB-E30-M2x-NUS0-M 44 g998RegionB-ADE30-M2x-NUS0-M 45 g998RegionB-ADE30-M2x-NUS0-A 46 g998RegionB-NONSTD-E17-M2x 47 g998RegionB-NONSTD-E17-M2x-M 48 g997RegionB-M1c-A-7 49 g997RegionB-M1x-M-8 50 g997RegionB-M1x-M 51 g997RegionB-M2x-M-8 52 g997RegionB-M2x-A 53 g997RegionB-M2x-M 54 g997RegionB-HPE17-M1-NUS0 55 g997RegionB-HPE30-M1-NUS0 56 g997RegionB-E17-M2x-A 57 g997RegionB-E30-M2x-NUS0	.1.3.6.1.4.1.5504.5.13.1.1.11.1.112
zhoneVdslLineEnableTrellisCoding Enables/disables Trellis coding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.13.1.1.11.1.113
zhoneVdslLineEnableRsCoding Enables/disables Rs coding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.13.1.1.11.1.114
zhoneVdslLineConfPsdShape Maximum transmit PSD allowed on a VDSL2 line.	Enumerationr/w Enumerated Values: 1 region-a-nus0 2 region-a-eu-32 3 region-a-eu-36 4 region-a-eu-40 5 region-a-eu-44 6 region-a-eu-48 7 region-a-eu-52 8 region-a-eu-56 9 region-a-eu-60 10 region-a-eu-64 11 region-a-eu-128 12 region-a-adlu-32 13 region-a-adlu-36 14 region-a-adlu-40 15 region-a-adlu-44 16 region-a-adlu-48 17 region-a-adlu-52 18 region-a-adlu-56 19 region-a-adlu-60 20 region-a-adlu-64 21 region-a-adlu-128 22 region-b-998-m1x-a 23 region-b-998-m1x-b 24 region-b-998-m1x-nus0 25 region-b-998-m2x-a 26 region-b-998-m2x-m 27 region-b-998-m2x-b 28 region-b-998-m2x-nus0 29 region-b-998-e17-m2x-nus0 30 region-b-998-e17-m2x-nus0-m 31 region-b-998-ade17-m2x-nus0-m 32 region-b-998-ade17-m2x-a 33 region-b-998-ade17-m2x-b 34 region-b-998-e30-m2x-nus0 35 region-b-998-e30-m2x-nus0-m 36 region-b-998-ade30-m2x-nus0-m 37 region-b-998-ade30-m2x-nus0-a 38 region-b-997-m1c-a-7 39 region-b-997-m1x-m-8 40 region-b-997-m1x-m 41 region-b-997-m2x-m-8 42 region-b-997-m2x-a 43 region-b-997-m2x-m 44 region-b-997-hpe17-m1-nus0 45 region-b-997-hpe30-m1-nus0 46 region-b-997-e17-m2x-a 47 region-b-997-e30-m2x-nus0 48 region-b-997-bt-anfp 49 region-c-138-b 50 region-c-276-b 51 region-c-138-co 52 region-c-276-co 53 region-c-tcmisdn 54 region-c-1104-co-17a 55 region-c-1104-co-30a	.1.3.6.1.4.1.5504.5.13.1.1.11.1.115
zhoneVdslLineConfDownPhyRSupport Enable or disable downstream PHYR. Only supported by Broadcom PHYR ports.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.116
zhoneVdslLineConfUpPhyRSupport Enable or disable upstream PHYR. Only supported by Broadcom PHYR ports.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.117
zhoneVdslLineConfDownPhyRmaxINP PHYR maximum downstream impulse noise protection. A value of 0 specifies no protection. The values 5 through 160 specify the number of symbols in 1/10 increments. On…	Integer32r/w Constraints: range: 0-0 range: 5-160	.1.3.6.1.4.1.5504.5.13.1.1.11.1.118
zhoneVdslLineConfUpPhyRmaxINP PHYR maximum upstream impulse noise protection. A value of 0 specifies no protection. The values 5 through 160 specify the number of symbols in 1/10 increments. Only…	Integer32r/w Constraints: range: 0-0 range: 5-160	.1.3.6.1.4.1.5504.5.13.1.1.11.1.119
zhoneVdslLineConfDownPhyRminRSoverhead PHYR minimum downstream RS overhead. Only supported by Broadcom PHYR ports.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.120
zhoneVdslLineConfUpPhyRminRSoverhead PHYR minimum upstream RS overhead. Only supported by Broadcom PHYR ports.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.121
zhoneVdslLineConfDownPhyRRtxRatio PHYR minimum downstream fraction of the line rate allocated for retransmission. Only supported by Broadcom PHYR ports.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.122
zhoneVdslLineConfUpPhyRRtxRatio PHYR minimum upstream fraction of the line rate allocated for retransmission. Only supported by Broadcom PHYR ports.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.123
zhoneVdslLineConfUpPboPsdParamA3 Upstream power backoff PSD parameter A3. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 4000-8096	.1.3.6.1.4.1.5504.5.13.1.1.11.1.124
zhoneVdslLineConfUpPboPsdParamA4 Upstream power backoff PSD parameter A4. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 4000-8096	.1.3.6.1.4.1.5504.5.13.1.1.11.1.125
zhoneVdslLineConfUpPboPsdParamB3 Upstream power backoff PSD parameter B3. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.5504.5.13.1.1.11.1.126
zhoneVdslLineConfUpPboPsdParamB4 Upstream power backoff PSD parameter B4. This parameter is only used if the mask selection is set to PSDMaskABParameters	.01 dBm/HzInteger32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.5504.5.13.1.1.11.1.127
zhoneVdslLineConfFallbackDefaultVpi ATM VPI to be used by the line when it trains in ADSL/ATM mode and bridges are configured for single-vc mode	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.128
zhoneVdslLineConfFallbackDefaultVci ATM VCI to be used by the line when it trains in ADSL/ATM mode and bridges are configured for single-vc mode	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5504.5.13.1.1.11.1.129
zhoneVdslLineConfDownGinpSupport Enable or disable downstream G.INP / ITU-G.998.4. Only supported by Broadcom ports.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.130
zhoneVdslLineConfUpGinpSupport Enable or disable upstream G.INP / ITU-G.998.4. Only supported by Broadcom ports.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5504.5.13.1.1.11.1.131
zhoneVdslLineConfDownGinpEtrMax gInpEtrMax - Maximum allowed value for downstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the maximum net data rate specified in the a…	kbpsUnsigned32r/w Constraints: range: 64-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.132
zhoneVdslLineConfUpGinpEtrMax gInpEtrMax - Maximum allowed value for upstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the maximum net data rate specified in the ass…	kbpsUnsigned32r/w Constraints: range: 64-2000000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.133
zhoneVdslLineConfDownGinpEtrMin gInpEtrMin - Minimum allowed value for downstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the minimum net data rate specified in the ass…	kbpsUnsigned32r/w Constraints: range: 64-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.134
zhoneVdslLineConfUpGinpEtrMin gInpEtrMin - Minimum allowed value for upstream expected throughput (ETR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the minimum net data rate specified in the assoc…	kbpsUnsigned32r/w Constraints: range: 64-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.135
zhoneVdslLineConfDownGinpNdrMax gInpNdrMax - Maximum allowed value for downstream net data rate (NDR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the maximum net data rate specified in the associat…	kbpsUnsigned32r/w Constraints: range: 64-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.136
zhoneVdslLineConfUpGinpNdrMax gInpNdrMax - Maximum allowed value for upstream net data rate (NDR) in kbit/s. The valid values are all multiples of 8 from 0 to the maximum of the valid values of the maximum net data rate specified in the associated…	kbpsUnsigned32r/w Constraints: range: 64-200000	.1.3.6.1.4.1.5504.5.13.1.1.11.1.137
zhoneVdslLineConfDownGinpShineRatio gInpShineRatio - The downstream loss of rate in a 1 second interval expressed as a fraction of NDR due to a single high impulse noise event (SHINE) impulse noise environment expected by the operator to occur at a pro…	ratioUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.138
zhoneVdslLineConfUpGinpShineRatio gInpShineRatio - The upstream loss of rate in a 1 second interval expressed as a fraction of NDR due to a single high impulse noise event (SHINE) impulse noise environment expected by the operator to occur at a proba…	ratioUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.5.13.1.1.11.1.139
zhoneVdslLineConfDownGinpLeftrThreshold gInpLeftrThreshold - The downstream rate Threshold below which the Low Error Free Rate (LEFTR) defect is declared. The threshold used to declare leftr defects is expressed in fraction of the net data rate (NDR). The …	ratioUnsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.5504.5.13.1.1.11.1.140
zhoneVdslLineConfUpGinpLeftrThreshold gInpLeftrThreshold - The upstream rate Threshold below which the Low Error Free Rate (LEFTR) defect is declared. The threshold used to declare leftr defects is expressed in fraction of the net data rate (NDR). The va…	ratioUnsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.5504.5.13.1.1.11.1.141
zhoneVdslLineConfDownGinpMaxDelay gInpMaxDelay - The maximum downstream delay in ms. This is the upper limit for the delay that is added to the transmission delay only caused by retransmissions. Here the receiver and/or the transmitter shall identify…	mSecsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.142
zhoneVdslLineConfUpGinpMaxDelay gInpMaxDelay - The maximum upstream delay in ms. This is the upper limit for the delay that is added to the transmission delay only caused by retransmissions. Here the receiver and/or the transmitter shall identify a…	mSecsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.143
zhoneVdslLineConfDownGinpMinDelay gInpMinDelay - The minimum downstream delay in ms. This is the lower limit for the delay that is added to the transmission delay caused by retransmissions only. The time stamp shall be used by the outlet shaping func…	mSecsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.144
zhoneVdslLineConfUpGinpMinDelay gInpMinDelay - The minimum upstream delay in ms. This is the lower limit for the delay that is added to the transmission delay caused by retransmissions only. The time stamp shall be used by the outlet shaping functi…	mSecsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.5504.5.13.1.1.11.1.145
zhoneVdslLineConfDownGinpMin ginpMin - The minimum downstream impulse noise protection (INP) against single high impulse noise event (SHINE) in discrete multitone (DMT) symbols. The valid values are all integers from 0 to 63 for system with a su…	symbolsUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.4.1.5504.5.13.1.1.11.1.146
zhoneVdslLineConfUpGinpMin ginpMin - The minimum upstream impulse noise protection (INP) against single high impulse noise event (SHINE) in discrete multitone (DMT) symbols. The valid values are all integers from 0 to 63 for system with a sub-…	symbolsUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.4.1.5504.5.13.1.1.11.1.147
zhoneVdslLineConfDownGinpMinRSoverhead gInpMinRSoverhead - This value specifies the downstream bandwidth reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N ratio. The unit is 1/256th and the range is 0..64 (0 to 25%).	ratioUnsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.5504.5.13.1.1.11.1.148
zhoneVdslLineConfUpGinpMinRSoverhead gInpMinRSoverhead - This value specifies the upstream bandwidth reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N ratio. The unit is 1/256th and the range is 0..64 (0 to 25%).	ratioUnsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.5504.5.13.1.1.11.1.149
zhoneVdslLineConfDownGinpReinCfg gInpReinCfg - The minimum downstream impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The valid values are all integers from 0 to 7 for system with a sub-carrier spacing of 4.3125…	symbolsUnsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.5504.5.13.1.1.11.1.150
zhoneVdslLineConfUpGinpReinCfg gInpReinCfg - The minimum upstream impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The valid values are all integers from 0 to 7 for system with a sub-carrier spacing of 4.3125 k…	symbolsUnsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.5504.5.13.1.1.11.1.151
zhoneVdslLineConfDownGinpReinFreq ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used in the Channel Initialization Policy and on-line reconfiguration procedures. REIN is commonly coupled from electrical power cables appliances…	HzEnumerationr/w Enumerated Values: 1 freq100hz 2 freq120hz	.1.3.6.1.4.1.5504.5.13.1.1.11.1.152
zhoneVdslLineConfUpGinpReinFreq ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used in the Channel Initialization Policy and on-line reconfiguration procedures. REIN is commonly coupled from electrical power cables appliances…	HzEnumerationr/w Enumerated Values: 1 freq100hz 2 freq120hz	.1.3.6.1.4.1.5504.5.13.1.1.11.1.153
zhoneVdslLineConfDownGinpRtxMode gInpRtxMode - Downstream retransmission Mode (RTX MODE). The RTX_MODE is a configuration parameter used to control activation of retransmission during initialization. This parameter has 4 valid values: FORBIDDEN: ITU-…	Enumerationr/w Enumerated Values: 1 forbidden 2 preferred 3 forced 4 testmode	.1.3.6.1.4.1.5504.5.13.1.1.11.1.154
zhoneVdslLineConfUpGinpRtxMode gInpRtxMode - Upstream retransmission Mode (RTX MODE). The RTX_MODE is a configuration parameter used to control activation of retransmission during initialization. This parameter has 4 valid values: FORBIDDEN: ITU-T …	Enumerationr/w Enumerated Values: 1 forbidden 2 preferred 3 forced 4 testmode	.1.3.6.1.4.1.5504.5.13.1.1.11.1.155