ZYXEL-accessSwitch-MIB Table View

A table that contains rpm information about the fans.

accessSwitchFanRpmEntry row .1.3.6.1.4.1.890.1.5.1.1.4.1

A list of rpm information for each fan.

Indexes

accessSwitchFanRpmIndex

Column	Syntax	OID
accessSwitchFanRpmIndexmandatory The identity of the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.4.1.1
accessSwitchFanRpmCurValuemandatory The current rpm of the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.4.1.2
accessSwitchFanRpmMaxValuemandatory The maximum rpm ever performed by the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.4.1.3
accessSwitchFanRpmMinValuemandatory The minimum rpm ever performed by the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.4.1.4
accessSwitchFanRpmLowThreshmandatory The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.4.1.5
accessSwitchFanRpmDescrmandatory The description of the fan (e.g. location, function, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.1.1.4.1.6

A table that contains voltage information about the system.

accessSwitchVoltageEntry row .1.3.6.1.4.1.890.1.5.1.1.5.1

A list of voltage information for each sensor.

Indexes

accessSwitchVoltageIndex

Column	Syntax	OID
accessSwitchVoltageIndexmandatory The identity of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.1
accessSwitchVoltageCurValuemandatory The current voltage detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.2
accessSwitchVoltageMaxValuemandatory The maximum voltage ever detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.3
accessSwitchVoltageMinValuemandatory The minimum voltage ever detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.4
accessSwitchVoltageNominalValuemandatory The nominal voltage which the power should supply (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.5
accessSwitchVoltageLowThreshmandatory The low threshold of the voltage. If the current voltage is less than the threshold, the device will initiate the voltageLow trap.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.5.1.6
accessSwitchVoltageDescrmandatory The description of the voltage (e.g. location, nominal value, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.1.1.5.1.7

A table that contains temperature information about system.

accessSwitchSysTempEntry row .1.3.6.1.4.1.890.1.5.1.1.6.1

A list of temperature information for each sensor.

Indexes

accessSwitchSysTempIndex

Column	Syntax	OID
accessSwitchSysTempIndexmandatory The identity of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.6.1.1
accessSwitchSysTempCurValuemandatory The current temperature detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.6.1.2
accessSwitchSysTempMaxValuemandatory The maximum temperature ever detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.6.1.3
accessSwitchSysTempMinValuemandatory The minimum temperature ever detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.6.1.4
accessSwitchSysTempHighThreshmandatory The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.6.1.5
accessSwitchSysTempDescrmandatory The description of the temperature sensor (e.g. location, function, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.1.1.6.1.6

This table includes the configuration of packet forwarding.

asPacketForwardingEntry row .1.3.6.1.4.1.890.1.5.1.1.20.1

An entry in asPacketForwardingTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
asPacketForwardingPortListmandatory The list defines the ports to which the packets will be forwarded.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.1.1.20.1.1

A table that contains DHCP server information.

asDhcpServerEntry row .1.3.6.1.4.1.890.1.5.1.1.25.1

The entry of DHCP server table.

Indexes

asDhcpServerIp

Column	Syntax	OID
asDhcpServerIpmandatory The IP address of the DHCP server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.1.1.25.1.1
asDhcpServerRowStatusmandatory The row status of the DHCP server entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.1.1.25.1.2

A table that contains Radius Server information.

asRadiusServerEntry row .1.3.6.1.4.1.890.1.5.1.1.29.1

The entry of Radius Server table.

Indexes

asRadiusServerIndex

Column	Syntax	OID
asRadiusServerIndexmandatory The identity of the RADIUS server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.29.1.1
asRadiusServerIpmandatory The IP address of the Radius Server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.1.1.29.1.2
asRadiusServerPortmandatory The UDP port of the Radius Server.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.29.1.3
asRadiusSharedSecretmandatory The shared secret of the Radius Server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.1.1.29.1.4
asRadiusServerRowStatusmandatory The row status of the Radius Server entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.1.1.29.1.5

This table includes the configuration of 802.1x.

asDot1xPortEntry row .1.3.6.1.4.1.890.1.5.1.1.31.1

An entry in asDot1xPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
asDot1xPortEnablemandatory The option defines if the port enables 802.1x settings.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.1.1.31.1.1
asDot1xPortControlmandatory The configuration defines the 802.1x port control type.	Enumerationr/w Enumerated Values: 1 auto 2 forceAuth 3 forceUnAuth	.1.3.6.1.4.1.890.1.5.1.1.31.1.2
asDot1xPortReAuthEnablemandatory The option defines if the port enables 802.1x re-authentication.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.890.1.5.1.1.31.1.3
asDot1xPortReAuthPeriodmandatory The configuration defines the 802.1x re-authentication period for each port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.1.1.31.1.4