ZYXEL-XGS360026F-FUNCTION-MIB Table View

A list of trap host entry. The numbers of entries are given by the value of xgs360026fTrapHostConfNumber.

xgs360026fTrapHostConfEntry row .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1

This is the entry information for trap host.

Indexes

xgs360026fTrapHostConfIndex

Column	Syntax	OID
xgs360026fTrapHostConfIndex The index of the trap host entry.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.1
xgs360026fTrapHostConfVersion The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)	Integer32r/w Constraints: range: 2-3	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.2
xgs360026fTrapHostConfIPType Server IP Type. Default: 4, 4 : IPv4, 6 : IPv6.	Integer32r/w Constraints: range: 4-4 range: 6-6	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.3
xgs360026fTrapHostConfIP This is the IP of the trap host.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.4
xgs360026fTrapHostConfPort This is the receiving-port number of the trap host. range : 1 - 65535.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.5
xgs360026fTrapHostConfCommunity The community/security name for the trap PDU.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.6
xgs360026fTrapHostConfSeverityLevel The Severity Level. 0 : Emerg, 1 : Alert, 2 : Crit, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.7
xgs360026fTrapHostConfSecurityLevel The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv).	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.8
xgs360026fTrapHostConfAuthPtc Authentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.9
xgs360026fTrapHostConfAuthPassword Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SH…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.10
xgs360026fTrapHostConfPrivPtc This is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.11
xgs360026fTrapHostConfPrivPassword The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.12
xgs360026fTrapHostConfCurrentMode 0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.13

Show port configurations.

xgs360026fPortConfigurationEntry row .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1

Indexes

xgs360026fPortConfPort

Column	Syntax	OID
xgs360026fPortConfPort port, range : 1 - port number.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.1
xgs360026fPortConfPortMedia Show port media.	OctetString Constraints: range: 1-4	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.2
xgs360026fPortConfLink The current link state.	OctetString Constraints: range: 2-4	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.3
xgs360026fPortConfCurrentSpeed The current link speed of the port.	OctetString Constraints: range: 6-12	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.4
xgs360026fPortConfSpeed default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 100…	Integer32r/w Constraints: range: 0-11	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.5
xgs360026fPortConfCurrentFlowControlRx 0: disable 1: enable 2: not support.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.6
xgs360026fPortConfCurrentFlowControlTx 0: disable 1: enable 2: not support.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.7
xgs360026fPortConfFlowControl default: 0, 0: disable 1: enable 2: not support.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.8
xgs360026fPortConfMaxFrameSize default: 9600 , range : 1518 - 9600	Integer32r/w Constraints: range: 1518-9600	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.9
xgs360026fPortConfExcessiveCollisionMode default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: not support.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.10
xgs360026fPortConfPowerControl default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: not support.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.11
xgs360026fPortConfDescription Interface specific description. Up to 47 characters describing this interface.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.12

Show the basic GARP port statistics.

xgs360026fGARPStatisticsEntry row .1.3.6.1.4.1.890.1.5.8.77.2.3.2.1

Indexes

xgs360026fGARPStatisticsPort

Column	Syntax	OID
xgs360026fGARPStatisticsPort port, range : 1 - port number.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.1
xgs360026fGARPStatisticsPeerMAC Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.2
xgs360026fGARPStatisticsFailedCount explain Failed count here.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.3

Create ACL ACE entry.

xgs360026fACLACEEntry row .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1

Indexes

xgs360026fACLACEIndex

Column	Syntax	OID
xgs360026fACLACEIndex	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.1
xgs360026fACLACEID If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.2
xgs360026fACLACENextID If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.3
xgs360026fACLACEIngressPort Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: 1,3,6.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.4
xgs360026fACLACEPortPolicyNumber policy value. range : 0 - 255.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.5
xgs360026fACLACEPortPolicyBitmask policy bitmask. range : 0 - 255(0xff).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.6
xgs360026fACLACEFrameType 0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp.	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.7
xgs360026fACLACEAction default: 1, 0: Deny 1: Permit	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.8
xgs360026fACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.9
xgs360026fACLACELogging default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.10
xgs360026fACLACERateLimiter default: 0, 0: Disable range : 0 - 16	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.12
xgs360026fACLACEShutdown default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.13
xgs360026fACLACEVLANTagPriority Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.15
xgs360026fACLACEVLANVID Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4094	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.16
xgs360026fACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.17
xgs360026fACLACESMAC Configure source MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. Any: Don't care.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.18
xgs360026fACLACEDMACType DMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast. 4: mac address range : 0 - 4	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.19
xgs360026fACLACEDMAC Configure destination MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcast: Frame must be broadcast. Unicast: Frame must…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.20
xgs360026fACLACEArpOpcode Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 3	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.21
xgs360026fACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data. …	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.22
xgs360026fACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SM…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.23
xgs360026fACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the …	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.24
xgs360026fACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06)…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.25
xgs360026fACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is …	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.26
xgs360026fACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is …	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.27
xgs360026fACLACESIPType Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.28
xgs360026fACLACESIPIPAddress A frame that hits this ACE matches this source IP address value.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.29
xgs360026fACLACESIPNetworkPrefix Network prefix. default: 32, 0: No data. range : 1 - 32	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.30
xgs360026fACLACEDIPType Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.32
xgs360026fACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.33
xgs360026fACLACEDIPNetworkPrefix Network prefix. default: 32, 0: No data. range : 1 - 32	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.34
xgs360026fACLACEIPProtocol Configure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.36
xgs360026fACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field greater than zero. 2: Any - Don't care. 3: No data. range : 0…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.37
xgs360026fACLACEIPFlagsOptions Configure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.38
xgs360026fACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater t…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.39
xgs360026fACLACEICMPType Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.40
xgs360026fACLACEICMPCode Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.41
xgs360026fACLACESourcePortMin Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.42
xgs360026fACLACESourcePortMax Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.43
xgs360026fACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.44
xgs360026fACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.45
xgs360026fACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.46
xgs360026fACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.47
xgs360026fACLACETCPFlagsRst Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.48
xgs360026fACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.49
xgs360026fACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.50
xgs360026fACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data. range : 0 - 2	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.51
xgs360026fACLACERowStatus 1: active 2: notInservice 4: destroy 5: undo	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.66

ACL ACE Status entry.

xgs360026fACLACEStatusEntry row .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1

Indexes

xgs360026fACLACEStatusIndex

Column	Syntax	OID
xgs360026fACLACEStatusIndex	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.1
xgs360026fACLACEStatusUser Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.2
xgs360026fACLACEStatusID ACE ID. range : 1 - 256.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.3
xgs360026fACLACEStatusIngressPort Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.4
xgs360026fACLACEStatusFrameType Indicates the frame type of the ACE.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.5
xgs360026fACLACEStatusAction Indicates the forwarding action of the ACE.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.6
xgs360026fACLACEStatusRateLimiter Indicates the rate limiter number of the ACE.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.7
xgs360026fACLACEStatusPortCopy Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.8
xgs360026fACLACEStatusMirror Specify the mirror operation of this port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.9
xgs360026fACLACEStatusCPU Forward packet that matched the specific ACE to CPU.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.10
xgs360026fACLACEStatusCounter The counter indicates the number of times the ACE was hit by a frame.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.11
xgs360026fACLACEStatusConflict Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.12

Create one ERPS group.

xgs360026fERPSConfEntry row .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1

Indexes

xgs360026fERPSConfIndex

Column	Syntax	OID
xgs360026fERPSConfIndex	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.1
xgs360026fERPSConfERPSID Protection group ID. range : 1 - 64.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.2
xgs360026fERPSConfPort0 East port of the switch in the ring. range : 1 - 26.	Integer32r/w Constraints: range: 1-26	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.3
xgs360026fERPSConfPort1 West port of the switch in the Ring. As interconnected sub-ring will have only one ring port, W port is configured as 0 for interconnected sub-ring. 0: in this field indicates that no west port is associated with this…	Integer32r/w Constraints: range: 0-26	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.4
xgs360026fERPSConfPort0SFMEP The East Signal Fail reporting MEP. range : 1 - 32.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.5
xgs360026fERPSConfPort1SFMEP The West Signal Fail reporting MEP. As only one SF MEP is associated with interconnected sub-ring without virtual channel, it is configured as 0 for such ring instances. 0: in this field indicates that no west SF MEP is…	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.6
xgs360026fERPSConfPort0APSMEP The East APS PDU handling MEP. range : 1 - 32.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.7
xgs360026fERPSConfPort1APSMEP The West APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel, it is configured as 0 for such ring instances. 0: in this field indicates that no west APS MEP is as…	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.8
xgs360026fERPSConfRingType Type of Protectiong ring. It can be either major ring or sub-ring. default: 0, 0: Major 1: Sub	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.9
xgs360026fERPSConfInterconnectedNode Interconnected Node indicates that the ring instance is interconnected. default: 0, 0: No - indicates that the configured instance is not interconnected. 1: Yes - indicates it is an interconnected node for this insta…	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.10
xgs360026fERPSConfVirtualChannel Sub-rings can either have virtual channel or not on the interconnected node. default: 0, 0: No - indicates, sub-ring doesn't have virtual channel. 1: Yes - indicates it is a sub-ring with virtual channel.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.11
xgs360026fERPSConfMajorRingID Major ring group ID for the interconnected sub-ring. It is used to send topology change updates on major ring. If ring is major, this value is same as the protection group ID of this ring.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.12
xgs360026fERPSConfAlarm There is an active alarm on the ERPS.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.13
xgs360026fERPSInstanceConfConfigured Down: This ERPS is only created and has not yet been configured - is not active. Up: This ERPS is configured - is active.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.14
xgs360026fERPSInstanceConfGuardTime Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages. default : 500(ms). range : 10 - 2000(ms).	Integer32r/w Constraints: range: 10-2000	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.15
xgs360026fERPSInstanceConfWTRTime The Wait To Restore timing value to be used in revertive switching. default : 5(minutes). range : 1 - 12(minutes).	Integer32r/w Constraints: range: 1-12	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.16
xgs360026fERPSInstanceConfHoldOffTime The timing value to be used to make persistent check on Signal Fail before switching. default : 0(seconds). range : 0 - 10000(ms).	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.17
xgs360026fERPSInstanceConfVersion ERPS version of a group. default : 1. 0: v1 1: v2	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.18
xgs360026fERPSInstanceConfRevertive ERPS revertibility of a group. default : 1. 0: non-revertible 1: revertible	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.19
xgs360026fERPSInstanceConfVLANconfig VID of the protected vlan.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.20
xgs360026fERPSConfRowStatus 1: active 2: notInservice 3: edit 4: destroy 5: undo	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.21

show instance configuration.

xgs360026fMRSTPInstanceConfigurationEntry row .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1

Indexes

xgs360026fMRSTPInstanceConfigurationInstance

Column	Syntax	OID
xgs360026fMRSTPInstanceConfigurationInstance mrstp instance id, range : 1-12	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.1
xgs360026fMRSTPInstanceConfigurationState MRSTP instance state. To really enable an MRSTP instance, the MRSTP Global State must also be enabled. default: 0, 0: disable 1: enable	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.2
xgs360026fMRSTPInstanceConfigurationVersion The STP protocol version. default: 1, 0: stp 1: rstp	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.3
xgs360026fMRSTPInstanceConfigurationPriority The instance priority would be truncated to a multiple of 4096. range : 0 - 61440, default: 32768.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.4
xgs360026fMRSTPInstanceConfigurationHelloTime The interval between periodic transmissions of STP Configuration Messages by Designated Ports when the Bridge Instance is the Root Bridge. range : 1 - 10 (seconds), and (HelloTime+1)*2 must be <= MaxAge. default: 2.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.5
xgs360026fMRSTPInstanceConfigurationMaxAge The maximum age of the information transmitted by the Bridge Instance when it is the Root Bridge. range : 6 - 40 (seconds), and MaxAge must be <= (FwdDelay-1)*2. default: 20.	Integer32r/w Constraints: range: 6-40	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.6
xgs360026fMRSTPInstanceConfigurationFWDelay The delay used by an MRSTP Bridge Instance to transit Root and Designated Ports to Forwarding (used in STP compatible mode). range : 4 - 30 (seconds), and MaxAge must be <= (FwdDelay-1)*2. default: 15.	Integer32r/w Constraints: range: 4-30	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.7

show mrstp status of instance(s).

xgs360026fMRSTPInstanceStatusEntry row .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1

Indexes

xgs360026fMRSTPInstanceStatusInstance

Column	Syntax	OID
xgs360026fMRSTPInstanceStatusInstance mrstp instance id, range : 1-12	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.1
xgs360026fMRSTPInstanceStatusGlobalState The global state of MRSTP. If disabled,all instances won't be in an active state. 0: disable 1: enable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.2
xgs360026fMRSTPInstanceStatusInstanceConfigState The configured state of an MRSTP instance. 0: disable 1: enable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.3
xgs360026fMRSTPInstanceStatusInstanceCurrentState The operational state of an MRSTP Bridge Instance. 0: disable 1: enable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.4
xgs360026fMRSTPInstanceStatusBridgeID The Bridge ID of this Bridge instance.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.5
xgs360026fMRSTPInstanceStatusBridgePrioriry The Bridge Priority of this Bridge instance. Value is shown in decimal. range : 0 - 61440	Integer32 Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.6
xgs360026fMRSTPInstanceStatusRootID The Bridge ID of the currently elected root bridge.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.7
xgs360026fMRSTPInstanceStatusRootPriority The Bridge Priority of the currently elected root bridge. Value is shown in decimal. range : 0 - 61440	Integer32 Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.8
xgs360026fMRSTPInstanceStatusRootPort The switch port currently assigned the root port role.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.9
xgs360026fMRSTPInstanceStatusRootPathCost For the Root Bridge it is zero. For all other Bridges, it is the sum of the Port Path Costs on the least cost path to the Root Bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.10
xgs360026fMRSTPInstanceStatusCurrentMaxAge The Max Age inherited from the Root Bridge. range : 6 - 40 (seconds)	Integer32 Constraints: range: 6-40	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.11
xgs360026fMRSTPInstanceStatusCurrentForwardDelay The Forward Delay time inherited from the Root Bridge. range : 4 - 30 (seconds)	Integer32 Constraints: range: 4-30	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.12
xgs360026fMRSTPInstanceStatusHelloTime The Hello Time inherited from the Root Bridge. range : 1 - 10 (seconds)	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.13
xgs360026fMRSTPInstanceStatusTopologyChangeCount The Topology Change Count since the MRSTP Bridge Instance is actually enabled.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.14
xgs360026fMRSTPInstanceStatusTimeSinceLastTopologyChange The time since last Topology Change occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.15

current MRSTP port configurations.

xgs360026fMRSTPPortConfigurationEntry row .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1

Indexes

xgs360026fMRSTPPortConfigurationPort

Column	Syntax	OID
xgs360026fMRSTPPortConfigurationPort The switch port number of the MRSTP port.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.1
xgs360026fMRSTPPortConfigurationInstance MRSTP Bridge Instance. default: 0 range : 0 - 12, 0: None	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.2
xgs360026fMRSTPPortConfigurationPathCost port path cost;when the value is 0,path cost is determined by physical port speed. default: 0 range : 0 - 200000000, 0: Auto	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.3
xgs360026fMRSTPPortConfigurationPriority Port Priority; would be truncated to a multiple of 16. default: 128 range : 0 - 240	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.4
xgs360026fMRSTPPortConfigurationAdminEdge port(s) as edge or non-edge. default: 1 0: non-edge 1: edge	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.5
xgs360026fMRSTPPortConfigurationAdminP2P administrative point-to-point (p2p) port. range : 0 - 2, default: 2 0: force to be p2p port(s) 1: force to be non-p2p port(s) 2: auto-detected according to port duplex	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.6
xgs360026fMRSTPPortConfigurationMigrateCheck default: 0 0: none 1: perform migration check on port(s)	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.7

show mrstp port information.

xgs360026fMRSTPPortStatusEntry row .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1

Indexes

xgs360026fMRSTPPortStatusPort

Column	Syntax	OID
xgs360026fMRSTPPortStatusPort The switch port number of the MRSTP port.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.1
xgs360026fMRSTPPortStatusInstance MRSTP Bridge Instance.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.2
xgs360026fMRSTPPortStatusState The current RSTP port state. The port state can be one of the following values: DISCARDING LISTENING FORWARDING NON-MRSTP INST-DSBL. INST-DSBL indicates that the Bridge Instance the port belongs to is disabled.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.3
xgs360026fMRSTPPortStatusRole The current MRSTP port role. The port role can be one of the following values: disable alternate backup ROOT DSGN none. none indicates that the Bridge Instance the port belongs to is disabled or the port is not an MRST…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.4
xgs360026fMRSTPPortStatusPathCost path cost.	Integer32 Constraints: range: 0-200000000	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.5
xgs360026fMRSTPPortStatusPathCostConfig port path cost config.	Integer32 Constraints: range: 0-200000000	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.6
xgs360026fMRSTPPortStatusPriority port priority.	Integer32 Constraints: range: 0-240	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.7
xgs360026fMRSTPPortStatusAdminEdge port(s) as edge or non-edge.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.8
xgs360026fMRSTPPortStatusAdminP2P administrative point-to-point (p2p) port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.9