ZYXEL-VDSLLINE-MIB Table View

This table includes common attributes describing both ends of the line.

accessSwitchVdslLineEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1

An entry in the accessSwitchVdslLineTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslLineCodingmandatory Specifies the VDSL coding type used on this line.	Enumeration Enumerated Values: 1 other 2 dmt 3 cap 4 qam	.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.1
accessSwitchVdslLineDiscCountmandatory Count of the number of disconnection failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2
accessSwitchVdslLineConfProfilemandatory The value of this object identifies the row in the VDSL Line Configuration Profile Table, (accessSwitchVdslLineConfProfileTable), which applies for this VDSL line.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.3

This table provides one row for each VTU-O.
Each row contains the physical layer parameters for that VTU-O.

accessSwitchVdslVtuoPhysEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1

An entry in the accessSwitchVdslVtuoPhysTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoCurrSnrMgnmandatory Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1
accessSwitchVdslVtuoCurrMsemandatory Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Enumerated Values: 1 inService 2 outOfService Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2
accessSwitchVdslVtuoCurrPsdmandatory Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz.	Integer32 Enumerated Values: 1 operable 2 inoperable 3 standby 4 inoperableIsInProgress 5 inoperableOosInProgress Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3
accessSwitchVdslVtuoCurrRsErrmandatory Reed-Solomon error counted by this VTU with respect to its received signal.	RFC1155-SMICounter Enumerated Values: 1 noStandbyConfigured 2 configuredAndAvailable 3 configuredAndUnavailable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4
accessSwitchVdslVtuoCurrAtnmandatory Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	RFC1155-SMIGauge Constraints: range: 22-670	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5
accessSwitchVdslVtuoCurrOutputPwrmandatory Measured total output power in 0.01dBm transmitted by this VTU.	Integer32 Constraints: range: 0-670	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6
accessSwitchVdslVtuoCurrRatemandatory Actual transmission rate in bits-per-second on this line.	Integer32 Constraints: range: 0-899	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7
accessSwitchVdslVtuoCurrAttainableRatemandatory Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	RFC1155-SMIGauge Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8
accessSwitchVdslVtuoCurrStatusmandatory Indicates mandatory state of the VTU-O line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossO…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9

This table provides one row for each VTU-R.
Each row contains the physical layer parameters for that VTU-R.

accessSwitchVdslVturPhysEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1

An entry in the accessSwitchVdslVturPhysTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturCurrSnrMgnmandatory Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1
accessSwitchVdslVturCurrMsemandatory Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2
accessSwitchVdslVturCurrPsdmandatory Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz.	Integer32 Enumerated Values: 1 active 2 standby 3 outOfService Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3
accessSwitchVdslVturCurrRsErrmandatory Reed-Solomon error counted by this VTU with respect to its received signal.	RFC1155-SMICounter Enumerated Values: 1 active 2 standby 3 outOfService Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4
accessSwitchVdslVturCurrAtnmandatory Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	RFC1155-SMIGauge Constraints: range: 700-700 range: 1200-1200 range: 1700-1700 range: 2200-2200 range: 2700-2700 range: 3200-3200 range: 3700-3700 range: 4200-4200 range: 4700-4700	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5
accessSwitchVdslVturCurrOutputPwrmandatory Measured total output power in 0.01dBm transmitted by this VTU.	Integer32 Constraints: range: 700-700 range: 1700-1700 range: 2700-2700 range: 3700-3700 range: 4700-4700 range: 5700-5700 range: 6700-6700 range: 7700-7700 range: 8700-8700 range: 9700-9700 range: 10700-10700 range: 11700-11700 range: 12700-12700 range: 13700-13700 range: 14700-14700	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6
accessSwitchVdslVturCurrRatemandatory Actual transmission rate in bits-per-second on this line.	Integer32 Constraints: range: 1-7	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7
accessSwitchVdslVturCurrAttainableRatemandatory Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	RFC1155-SMIGauge Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8
accessSwitchVdslVturCurrStatusmandatory Indicates mandatory state of the VTU-R line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossO…	Integer32 Constraints: range: 100-100 range: 150-150 range: 200-200 range: 250-250 range: 300-300 range: 350-350	.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9

This table provides one row for each VTU-O.
Each row contains the inventory parameters for that VTU-O.

accessSwitchVdslVtuoInventoryEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1

An entry in the accessSwitchVdslVtuoInventoryTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoInvSerialNumbermandatory The vendor specific string that identifies the vendor equipment.	RFC1213-MIBDisplayString Constraints: range: 1-7	.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.1
accessSwitchVdslVtuoInvVendorIDmandatory The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.2
accessSwitchVdslVtuoInvVersionNumbermandatory The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Constraints: range: 100-100 range: 150-150 range: 200-200 range: 250-250 range: 300-300 range: 350-350	.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.3

This table provides one row for each VTU-R.
Each row contains the inventory parameters for that VTU-R.

accessSwitchVdslVturInventoryEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1

An entry in the accessSwitchVdslVturInventoryTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturInvSerialNumbermandatory The vendor specific string that identifies the vendor equipment.	RFC1213-MIBDisplayString Enumerated Values: 1 active 2 standby 3 outOfService	.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.1
accessSwitchVdslVturInvVendorIDmandatory The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Enumerated Values: 1 active 2 standby 3 outOfService	.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.2
accessSwitchVdslVturInvVersionNumbermandatory The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.3

This table provides one row for each VTU-O.

accessSwitchVdslVtuoPerfDataEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1

An entry in accessSwitchVdslVtuoPerfDataTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoPerfLofsmandatory Count of the number of Loss of Framing failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.1
accessSwitchVdslVtuoPerfLossmandatory Count of the number of Loss of Signal failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.2
accessSwitchVdslVtuoPerfLolsmandatory Count of the number of Loss of Link failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.3
accessSwitchVdslVtuoPerfLprsmandatory Count of the number of Loss of Power failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.4
accessSwitchVdslVtuoPerfESsmandatory Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.5
accessSwitchVdslVtuoPerfInitsmandatory Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.6
accessSwitchVdslVtuoPerfValidIntervalsmandatory The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7
accessSwitchVdslVtuoPerfInvalidIntervalsmandatory The number of intervals in the range from 0 to the value of accessSwitchVdslVtuoPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.8
accessSwitchVdslVtuoPerfCurr15MinTimeElapsedmandatory Total elapsed seconds in this interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.9
accessSwitchVdslVtuoPerfCurr15MinLofsmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.10
accessSwitchVdslVtuoPerfCurr15MinLossmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.11
accessSwitchVdslVtuoPerfCurr15MinLolsmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Link.	RFC1155-SMICounter Constraints: range: 1-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.12
accessSwitchVdslVtuoPerfCurr15MinLprsmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.13
accessSwitchVdslVtuoPerfCurr15MinESsmandatory Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.14
accessSwitchVdslVtuoPerfCurr15MinInitsmandatory Count of the line initialization attempts in the mandatory 15 minute interval. Includes both successful and failed attempts.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.15
accessSwitchVdslVtuoPerfCurr1DayTimeElapsedmandatory Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Unsigned32 Constraints: range: 0-86399	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.16
accessSwitchVdslVtuoPerfCurr1DayLofsmandatory Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.17
accessSwitchVdslVtuoPerfCurr1DayLossmandatory Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.18
accessSwitchVdslVtuoPerfCurr1DayLolsmandatory Count of the number of seconds when there was Loss of Link during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.19
accessSwitchVdslVtuoPerfCurr1DayLprsmandatory Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.20
accessSwitchVdslVtuoPerfCurr1DayESsmandatory Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21
accessSwitchVdslVtuoPerfCurr1DayInitsmandatory Count of the line initialization attempts in the day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.22
accessSwitchVdslVtuoPerfPrev1DayMoniSecsmandatory The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.23
accessSwitchVdslVtuoPerfPrev1DayLofsmandatory Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.24
accessSwitchVdslVtuoPerfPrev1DayLossmandatory Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.25
accessSwitchVdslVtuoPerfPrev1DayLolsmandatory Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.26
accessSwitchVdslVtuoPerfPrev1DayLprsmandatory Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.27
accessSwitchVdslVtuoPerfPrev1DayESsmandatory Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.28
accessSwitchVdslVtuoPerfPrev1DayInitsmandatory Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.29

This table provides one row for each VTU-R.

accessSwitchVdslVturPerfDataEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1

An entry in accessSwitchVdslVturPerfDataTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturPerfLofsmandatory Count of the number of Loss of Framing failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1
accessSwitchVdslVturPerfLossmandatory Count of the number of Loss of Signal failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2
accessSwitchVdslVturPerfLprsmandatory Count of the number of Loss of Power failures since agent reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3
accessSwitchVdslVturPerfESsmandatory Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4
accessSwitchVdslVturPerfValidIntervalsmandatory The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5
accessSwitchVdslVturPerfInvalidIntervalsmandatory The number of intervals in the range from 0 to the value of accessSwitchVdslVturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6
accessSwitchVdslVturPerfCurr15MinTimeElapsedmandatory Total elapsed seconds in this interval.	Unsigned32 Constraints: range: 0-899 range: 1-2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7
accessSwitchVdslVturPerfCurr15MinLofsmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	RFC1155-SMICounter Constraints: range: 1-28	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8
accessSwitchVdslVturPerfCurr15MinLossmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	RFC1155-SMICounter Enumerated Values: 1 payload 2 secondary 3 primary Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9
accessSwitchVdslVturPerfCurr15MinLprsmandatory Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10
accessSwitchVdslVturPerfCurr15MinESsmandatory Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11
accessSwitchVdslVturPerfCurr1DayTimeElapsedmandatory Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Unsigned32 Constraints: range: 0-86399 range: 1-28	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12
accessSwitchVdslVturPerfCurr1DayLofsmandatory Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13
accessSwitchVdslVturPerfCurr1DayLossmandatory Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14
accessSwitchVdslVturPerfCurr1DayLprsmandatory Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Constraints: range: 1-2048	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15
accessSwitchVdslVturPerfCurr1DayESsmandatory Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one …	RFC1155-SMICounter Enumerated Values: 1 inService 2 outOfService Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16
accessSwitchVdslVturPerfPrev1DayMoniSecsmandatory The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Enumerated Values: 1 inService 2 outOfService Constraints: range: 0-86400	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17
accessSwitchVdslVturPerfPrev1DayLofsmandatory Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	RFC1155-SMICounter Enumerated Values: 0 up 1 fault 2 manualOos 3 removedFromServiceBySwitch 4 unEquipped 5 notConnected Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18
accessSwitchVdslVturPerfPrev1DayLossmandatory Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	RFC1155-SMICounter Enumerated Values: 1 inService 2 permanentSignal Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19
accessSwitchVdslVturPerfPrev1DayLprsmandatory Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	RFC1155-SMICounter Enumerated Values: 2 loopstart 3 groundstart 4 loopreversebattery 5 electronicbusinessset Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20
accessSwitchVdslVturPerfPrev1DayESsmandatory Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21

This table provides one row for each VTU-O
performance data collection interval.

accessSwitchVdslVtuoIntervalEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1

An entry in the accessSwitchVdslVtuoIntervalTable.

Indexes

ifIndex accessSwitchVdslVtuoIntervalNumber

Column	Syntax	OID
accessSwitchVdslVtuoIntervalNumbermandatory Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.1
accessSwitchVdslVtuoIntervalLofsmandatory Count of seconds in the interval when there was Loss of Framing.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.2
accessSwitchVdslVtuoIntervalLossmandatory Count of seconds in the interval when there was Loss of Signal.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.3
accessSwitchVdslVtuoIntervalLolsmandatory Count of seconds in the interval when there was Loss of Link.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.4
accessSwitchVdslVtuoIntervalLprsmandatory Count of seconds in the interval when there was Loss of Power.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.5
accessSwitchVdslVtuoIntervalESsmandatory Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6
accessSwitchVdslVtuoIntervalInitsmandatory Count of the line initialization attempts during the interval. Includes both successful and failed attempts.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.7
accessSwitchVdslVtuoIntervalValidDatamandatory This variable indicates if the data for this interval is valid.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.8

This table provides one row for each VTU-R
performance data collection interval.

accessSwitchVdslVturIntervalEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1

An entry in the accessSwitchVdslVturIntervalTable.

Indexes

ifIndex accessSwitchVdslVturIntervalNumber

Column	Syntax	OID
accessSwitchVdslVturIntervalNumbermandatory Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.1
accessSwitchVdslVturIntervalLofsmandatory Count of seconds in the interval when there was Loss of Framing.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.2
accessSwitchVdslVturIntervalLossmandatory Count of seconds in the interval when there was Loss of Signal.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.3
accessSwitchVdslVturIntervalLprsmandatory Count of seconds in the interval when there was Loss of Power.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.4
accessSwitchVdslVturIntervalESsmandatory Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.5
accessSwitchVdslVturIntervalValidDatamandatory This variable indicates if the data for this interval is valid.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.6

This table contains information on the VDSL line
configuration. One entry in this table reflects a
profile which can be used to configure the VDSL line.

accessSwitchVdslLineConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1

Each entry consists of a list of parameters that
represents the configuration of an VDSL modem.

When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set…

Indexes

accessSwitchVdslLineConfProfileName

Column	Syntax	OID
accessSwitchVdslLineConfProfileNamemandatory This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always pro…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1
accessSwitchVdslLineConfModemandatory Specifies the VDSL mode type used on this line.	Enumeration Enumerated Values: 0 tenBase-S 1 ansi 2 etsi	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2
accessSwitchVdslVtuoConfRatemandatory Transmission rate in bits-per-second specified by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3
accessSwitchVdslVtuoConfTargetSnrMgnmandatory Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4
accessSwitchVdslVtuoConfMaxSnrMgnmandatory Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5
accessSwitchVdslVtuoConfMinSnrMgnmandatory Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initi…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6
accessSwitchVdslVturConfRatemandatory Transmission rate in bits-per-second specified by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7
accessSwitchVdslVturConfTargetSnrMgnmandatory Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8
accessSwitchVdslVturConfMaxSnrMgnmandatory Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9
accessSwitchVdslVturConfMinSnrMgnmandatory Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initi…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10
accessSwitchVdslLineConfProfileRowStatusmandatory This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11

This table provides one row for each VTU-O if QAM is used.
Each row contains the modulation parameters for that VTU-O.

accessSwitchVdslVtuoQamEntry row .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1

An entry in the accessSwitchVdslVtuoQamTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoQamConstellationmandatory Modulation method used by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.1
accessSwitchVdslVtuoQamInterpolationmandatory Modulation speed used by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.2
accessSwitchVdslVtuoQamFcmandatory Carrier frequency in Hz used by this ATU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.3

This table provides one row for each VTU-R if QAM is used.
Each row contains the modulation parameters for that VTU-R.

accessSwitchVdslVturQamEntry row .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1

An entry in the accessSwitchVdslVturQamTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturQamConstellationmandatory Modulation method used by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.1
accessSwitchVdslVturQamInterpolationmandatory Modulation speed used by this VTU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.2
accessSwitchVdslVturQamFcmandatory Carrier frequency in Hz used by this ATU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.3