ZYXEL-POLICY-ROUTE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

zyxelPolicyRouteProfileTable

table
.1.3.6.1.4.1.890.1.15.3.60.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPolicyRouteProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POLICY-ROUTE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POLICY-ROUTE-MIB::zyxelPolicyRouteProfileTable' 
The table contains policy route profile configuration.
zyxelPolicyRouteProfileEntry row .1.3.6.1.4.1.890.1.15.3.60.1.2.1
An entry contains policy route profile configuration.
Indexes
Column Syntax OID
zyPolicyRouteProfileState
Enable/Disable this policy routing profile and rule in the profile.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.60.1.2.1.1
zyPolicyRouteProfileName
A descriptive name for identification policy route profile.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.60.1.2.1.2
zyPolicyRouteProfileRowStatus
This object allows entries to be created and deleted from the policy route profile table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.60.1.2.1.3

zyxelPolicyRouteTable

table
.1.3.6.1.4.1.890.1.15.3.60.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPolicyRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POLICY-ROUTE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POLICY-ROUTE-MIB::zyxelPolicyRouteTable' 
The table contains policy route rule configuration.
zyxelPolicyRouteEntry row .1.3.6.1.4.1.890.1.15.3.60.1.4.1
An entry contains policy route rule configuration.
Indexes
Column Syntax OID
zyPolicyRouteProfile
The policy routing profile you configure.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.1
zyPolicyRouteSequence
The rule number from 1 to 64. The ordering of your rules is important as rules are applied in turn.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.2
zyPolicyRouteStatement
Statement of policy route rule.
Select Permit to forward traffic that matches this rule to the gateway specified in the rule.
Select Deny to disable the rule action and forward traffic that matches this rule according…
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.3
zyPolicyRouteCalssifier
The available active classifiers you configure, which are not used by any policy rule or policy routing rule.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.4
zyPolicyRouteNextHop
Next hop IP address if the incoming packets match the criteria. 0.0.0.0 means nothing be done.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.5
zyPolicyRouteRowStatus
This object allows entries to be created and deleted from the policy route rule table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.60.1.4.1.6