ZYXEL-OSPF-MIB Table View

The table contains OSPF interface configuration.

zyxelOspfIfEntry row .1.3.6.1.4.1.890.1.15.3.57.1.1.1

An entry contains OSPF interface configuration

Indexes

OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf

Column	Syntax	OID
zyOspfIfKeyId Specify the identification number of the authentication if you want to use.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.1.1.1

The table contains OSPF area configuration.

zyxelOspfAreaEntry row .1.3.6.1.4.1.890.1.15.3.57.1.2.1

An entry contains OSPF area configuration.

Indexes

OSPF-MIBospfAreaId

Column	Syntax	OID
zyOspfAreaName Specify a descriptive name (up to 32 printable ASCII characters) for identification purposes.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.57.1.2.1.1
zyOspfAreaDefaultRouteMetric The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.2.1.2

The table contains OSPF redistribute route configuration.

zyxelOspfRedistributeRouteEntry row .1.3.6.1.4.1.890.1.15.3.57.1.3.1

An entry contains OSPF redistribute route configuration.

Indexes

zyOspfRedistributeRouteProtocol

Column	Syntax	OID
zyOspfRedistributeRouteProtocol Route redistribution allows your switch to import and translate external routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently.	Enumeration Enumerated Values: 1 rip 2 static	.1.3.6.1.4.1.890.1.15.3.57.1.3.1.1
zyOspfRedistributeRouteState Enable/Disable the routing protocol to activate route redistribution for routes learned.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.57.1.3.1.2
zyOspfRedistributeRouteType Select 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is added to the AB boundary router to the external me…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.3.1.3
zyOspfRedistributeRouteMetric Specify a route cost (between 0 and 16777215).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.3.1.4

The table contains OSPF virtual link configuration.

zyxelOspfVirtualLinkEntry row .1.3.6.1.4.1.890.1.15.3.57.1.4.1

An entry contains OSPF virtual link configuration.

Indexes

OSPF-MIBospfVirtIfAreaId OSPF-MIBospfVirtIfNeighbor

Column	Syntax	OID
zyOspfVirtualLinkName Specify a descriptive name (up to 32 printable ASCII characters) for identification purpose.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.57.1.4.1.1
zyOspfVirtualLinkKeyId Specify the identification number of the authentication you want to use.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.4.1.2

The table contains OSPF summary address configuration.

zyxelOspfSummaryAddressEntry row .1.3.6.1.4.1.890.1.15.3.57.1.6.1

An entry contains OSPF summary address configuration.

Indexes

zyOspfSummaryAddressIpAddress zyOspfSummaryAddressMaskBits

Column	Syntax	OID
zyOspfSummaryAddressIpAddress Specify a network IP address which can cover more than one network in order to reduce the routing table size. For example, you can use 192.168.8.0/22 instead of using 192.168.8.0/24, 192.168.9.0/24, 192.168.10.0/24, an…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.57.1.6.1.1
zyOspfSummaryAddressMaskBits Specify the subnet mask for this summary IP address which can cover multiple networks.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.1.6.1.2
zyOspfSummaryAddressRowStatus This object allow entries to be created and deleted from the summary address table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.15.3.57.1.6.1.3

The table contains OSPF interface information.

zyxelOspfIfInfoEntry row .1.3.6.1.4.1.890.1.15.3.57.2.1.1

An entry contains OSPF interface information.

Indexes

OSPF-MIBospfIfIpAddress OSPF-MIBospfAddressLessIf

Column	Syntax	OID
zyOspfIfInfoMaskbits The subnet mask bits of an IP routing domain that is associated to this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.1
zyOspfIfInfoDesignatedRouterID The IP Address of the Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.2
zyOspfIfInfoBackupDesignatedRouterID The IP Address of the Backup Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.3
zyOspfIfInfoNbrCount Regardless of state, counting all adjacent neighbors.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.4
zyOspfIfInfoAdjacentNbrCount Counting the adjacent neighbor if its state is full.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.5
zyOspfIfInfoHelloDueTime The interface would send hello packet when the due time is timeout.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.57.2.1.1.6

The table contains OSPF neighbor information.

zyxelOspfNbrEntry row .1.3.6.1.4.1.890.1.15.3.57.2.2.1

An entry contains OSPF neighbor information.

Indexes

OSPF-MIBospfNbrIpAddr OSPF-MIBospfNbrAddressLessIndex

Column	Syntax	OID
zyOspfNbrRole This variable display the neighbor role.	Enumeration Enumerated Values: 1 dr 2 backup 3 drOther	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.1
zyOspfNbrDeadtime The neighbor would be disconnect when the dead time is timeout. The dead time would be reset when the switch receives hello packet from the neighbor.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.2
zyOspfNbrInterface The interface is connected with the neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.3
zyOspfNbrRetransmitLSA The list of LSAs that have been flooded but not acknowledged on this adjacency. These will be retransmitted at intervals until they are acknowledged, or until the adjacency is destroyed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.4
zyOspfNbrRequestLSA The list of LSAs that need to be received from this neighbor in order to synchronize the two neighbors' link-state databases. This list is created as Database Description packets are received, and is then sent to the …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.5
zyOspfNbrDatabaseSummaryLSA The complete list of LSAs that make up the area link-state database, at the moment the neighbor goes into Database Exchange state. This list is sent to the neighbor in DatabaseDescription packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.2.1.6

The table contains OSPF link state database information.

zyxelOspfLsdbEntry row .1.3.6.1.4.1.890.1.15.3.57.2.3.1

An entry contains OSPF link state database information.

Indexes

OSPF-MIBospfLsdbAreaId OSPF-MIBospfLsdbType OSPF-MIBospfLsdbLsid OSPF-MIBospfLsdbRouterId

Column	Syntax	OID
zyOspfLsdbLinkCount Display how many link in this Link State Database.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.3.1.1
zyOspfLsdbRouteIpAddress Display the ip address of routing domain in this Link State Database.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.57.2.3.1.2
zyOspfLsdbRouteMaskBits Display the mask bits of routing domain in this Link State Database.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.57.2.3.1.3