ZYXEL-MES3728-MIB Table View

Column Syntax OID

brLimitPortBrState

Broadcast rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.1

brLimitPortBrRate

Allowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.2

brLimitPortMcState

Multicast rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.3

brLimitPortMcRate

AAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.4

brLimitPortDlfState

Destination lookup failure frames rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.5

brLimitPortDlfRate

Allowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.3.2.1.6

portSecurityPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portSecurityPortTable'

portSecurityPortEntry row .1.3.6.1.4.1.890.1.5.8.45.4.2.1

An entry in portSecurityPortTable.

Indexes

Column Syntax OID

portSecurityPortState

Port Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSec…

portSecurityPortLearnState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.4.2.1.1

MAC address learning enabled/disable on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.4.2.1.2

portSecurityPortCount

Number of (dynamic) MAC addresses that may be learned on the port.

portSecurityVMLPort portSecurityVMLVID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.4.2.1.3

portSecurityVMLTable

table

.1.3.6.1.4.1.890.1.5.8.45.4.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityVMLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portSecurityVMLTable'

portSecurityVMLEntry row .1.3.6.1.4.1.890.1.5.8.45.4.4.1

An entry in portSecurityVMLTable.

Indexes

Column Syntax OID

portSecurityVMLPort

The configured port number of VLAN MAC Limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.4.4.1.1

portSecurityVMLVID

The configured VLAN number of VLAN MAC Limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.4.4.1.2

portSecurityVMLMacLimit

The MAC limit of specific port and VLAN.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.4.4.1.3

portSecurityVMLRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.890.1.5.8.45.4.4.1.4

vlanTrunkPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::vlanTrunkPortTable'

vlanTrunkPortEntry row .1.3.6.1.4.1.890.1.5.8.45.5.1.1

An entry in vlanTrunkPortTable.

Indexes

Column Syntax OID

vlanTrunkPortState

VlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.5.1.1.1

ctlProtTransTunnelPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.6.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ctlProtTransTunnelPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::ctlProtTransTunnelPortTable'

ctlProtTransTunnelPortEntry row .1.3.6.1.4.1.890.1.5.8.45.6.2.1

An entry in ctlProtTransTunnelPortTable.

Indexes

Column Syntax OID

ctlProtTransTunnelMode

Bridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)

Enumerationr/w

Enumerated Values:

0	peer
1	tunnel
2	discard
3	network

.1.3.6.1.4.1.890.1.5.8.45.6.2.1.1

vlanStackPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.7.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanStackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::vlanStackPortTable'

vlanStackPortEntry row .1.3.6.1.4.1.890.1.5.8.45.7.3.1

An entry in vlanStackPortTable.

Indexes

Column Syntax OID

vlanStackPortMode

Mode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the swit…

Enumerationr/w

Enumerated Values:

1	normal
2	access
3	tunnel

.1.3.6.1.4.1.890.1.5.8.45.7.3.1.1

vlanStackPortVid

VLAN ID used in service provider tag.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.7.3.1.2

vlanStackPortPrio

Priority value for service provider tag.
0 is the lowest priority level and 7 is the highest.

Enumerationr/w

Enumerated Values:

0	prioriry-0
1	prioriry-1
2	prioriry-2
3	prioriry-3
4	prioriry-4
5	prioriry-5
6	prioriry-6
7	prioriry-7

.1.3.6.1.4.1.890.1.5.8.45.7.3.1.3

vlanStackTunnelPortTpid

Tunnel Port TPID in hex format, e.g. 8100.

selectiveQinQPort selectiveQinQCvid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.7.3.1.4

selectiveQinQTable

table

.1.3.6.1.4.1.890.1.5.8.45.7.4 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk selectiveQinQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::selectiveQinQTable'

selectiveQinQEntry row .1.3.6.1.4.1.890.1.5.8.45.7.4.1

An entry in selective qinq table

Indexes

Column Syntax OID

selectiveQinQName

The name of selective qinq entry

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.1

selectiveQinQPort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.2

selectiveQinQCvid

inner vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.3

selectiveQinQSpvid

outer vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.4

selectiveQinQPriority

priority

Enumerationr/w

Enumerated Values:

0	prioriry-0
1	prioriry-1
2	prioriry-2
3	prioriry-3
4	prioriry-4
5	prioriry-5
6	prioriry-6
7	prioriry-7

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.5

selectiveQinQRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.7.4.1.6

portAuthTable

table

.1.3.6.1.4.1.890.1.5.8.45.8.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portAuthTable'

portAuthEntry row .1.3.6.1.4.1.890.1.5.8.45.8.4.1

An entry in portAuthTable.

Indexes

Column Syntax OID

portAuthEntryState

802.1x port authentication enabled or disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.8.4.1.1

portReAuthEntryState

802.1x port re-authentication enabled or disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.8.4.1.2

portReAuthEntryTimer

Re-authentication timer in seconds.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.8.4.1.3

fanRpmTable

table

.1.3.6.1.4.1.890.1.5.8.45.9.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanRpmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::fanRpmTable'

fanRpmEntry row .1.3.6.1.4.1.890.1.5.8.45.9.1.1

An entry in fanRpmTable.

Indexes

fanRpmIndex

Column	Syntax	OID
fanRpmIndex Index of FAN.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.1`
fanRpmCurValue Current speed in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.2`
fanRpmMaxValue Maximum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.3`
fanRpmMinValue Minimum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.4`
fanRpmLowThresh The minimum speed at which a normal fan should work.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.5`
fanRpmDescr 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.8.45.9.1.1.6`

tempTable

table

.1.3.6.1.4.1.890.1.5.8.45.9.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tempTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::tempTable'

tempEntry row .1.3.6.1.4.1.890.1.5.8.45.9.2.1

An entry in tempTable.

Indexes

tempIndex

Column Syntax OID

tempIndex

Index of temperature unit. 1:MAC, 2:CPU, 3:PHY

Enumeration

Enumerated Values:

1	mac
2	cpu
3	phy

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.1

tempCurValue

The current temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.2

tempMaxValue

The maximum temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.3

tempMinValue

The minimum temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.4

tempHighThresh

The upper temperature limit at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.5

tempDescr

'Normal' indicates temperatures below the threshold and 'Error' for those above.

.1.3.6.1.4.1.890.1.5.8.45.9.2.1.6

voltageTable

table

.1.3.6.1.4.1.890.1.5.8.45.9.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::voltageTable'

voltageEntry row .1.3.6.1.4.1.890.1.5.8.45.9.3.1

An entry in voltageTable.

Indexes

voltageIndex

Column	Syntax	OID
voltageIndex Index of voltage.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.1`
voltageCurValue The current voltage reading.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.2`
voltageMaxValue The maximum voltage measured at this point.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.3`
voltageMinValue The minimum voltage measured at this point.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.4`
voltageNominalValue The normal voltage at wchich the switch work.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.5`
voltageLowThresh The minimum voltage at which the switch should work.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.6`
voltageDescr 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.8.45.9.3.1.7`

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.8.45.10.4 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::snmpTrapDestTable'

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.8.45.10.4.1

An entry in snmpTrapDestTable.

Indexes

snmpTrapDestIP

Column Syntax OID

snmpTrapDestIP

IP address of trap destination.

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.10.4.1.1

snmpTrapDestRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.10.4.1.2

snmpTrapDestPort

The UDP port of the trap destination.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.10.4.1.3

snmpTrapVersion

The SNMP protocol version to send traps.

Enumerationr/w

Enumerated Values:

0	v1
1	v2c
2	v3

.1.3.6.1.4.1.890.1.5.8.45.10.4.1.4

snmpTrapUserName

The user name for sending SNMPv3 traps.

.1.3.6.1.4.1.890.1.5.8.45.10.4.1.5

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.8.45.10.6 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::snmpUserTable'

A table that contains SNMPv3 user information.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.8.45.10.6.1

An entry of snmpUserTable.

Indexes

snmpUserName

Column Syntax OID

snmpUserName

The user name.

.1.3.6.1.4.1.890.1.5.8.45.10.6.1.1

snmpUserSecurityLevel

The level of security at which SNMP messages can be sent or
with which operations are being processed.

Enumerationr/w

Enumerated Values:

0	noAuthNoPriv
1	authNoPriv
2	authPriv

.1.3.6.1.4.1.890.1.5.8.45.10.6.1.2

snmpUserAuthProtocol

The type of authentication protocol to be used.

Enumerationr/w

Enumerated Values:

0	md5
1	sha

.1.3.6.1.4.1.890.1.5.8.45.10.6.1.3

snmpUserPrivProtocol

The type of privacy protocol to be used.

Enumerationr/w

Enumerated Values:

0	des
1	aes

.1.3.6.1.4.1.890.1.5.8.45.10.6.1.4

snmpTrapGroupTable

table

.1.3.6.1.4.1.890.1.5.8.45.10.7 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::snmpTrapGroupTable'

snmpTrapGroupEntry row .1.3.6.1.4.1.890.1.5.8.45.10.7.1

An entry in snmpTrapGroupTable.

Indexes

snmpTrapDestIP

Column Syntax OID

snmpTrapSystemGroup

Bitsr/w

Enumerated Values:

0	coldStart
1	warmStart
2	fanSpeed
3	temperature
4	voltage
5	reset
6	timeSync
7	intrusionlock
10	externalalarm
13	loopGuard

.1.3.6.1.4.1.890.1.5.8.45.10.7.1.1

snmpTrapInterfaceGroup

Bitsr/w

Enumerated Values:

0	linkup
1	linkdown
2	autonegotiation
3	lldp
4	transceiver-ddm

.1.3.6.1.4.1.890.1.5.8.45.10.7.1.2

snmpTrapAAAGroup

Bitsr/w

Enumerated Values:

0	authentication
1	accounting

.1.3.6.1.4.1.890.1.5.8.45.10.7.1.3

snmpTrapIPGroup

Bitsr/w

Enumerated Values:

0	ping
1	traceroute

.1.3.6.1.4.1.890.1.5.8.45.10.7.1.4

snmpTrapSwitchGroup

Bitsr/w

Enumerated Values:

0	stp
1	mactable
2	rmon
3	cfm

.1.3.6.1.4.1.890.1.5.8.45.10.7.1.5

igmpsnpVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.13.13 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpsnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::igmpsnpVlanTable'

igmpsnpVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.13.13.1

An entry in IgmpsnpVlanTable.

Indexes

igmpsnpVid

Column Syntax OID

igmpsnpVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.13.13.1.1

igmpsnpVlanName

.1.3.6.1.4.1.890.1.5.8.45.13.13.1.2

igmpsnpVlanRowStatus

inbandEntryIp inbandEntryVid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.13.13.1.3

inbandIpTable

table

.1.3.6.1.4.1.890.1.5.8.45.14.6 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::inbandIpTable'

inbandIpEntry row .1.3.6.1.4.1.890.1.5.8.45.14.6.1

An entry in inbandIpTable.

Indexes

Column Syntax OID

inbandEntryIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.1

inbandEntrySubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.2

inbandEntryGateway

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.3

inbandEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.4

inbandEntryManageable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.5

inbandEntryRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.14.6.1.6

filterTable

table

.1.3.6.1.4.1.890.1.5.8.45.15.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk filterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::filterTable'

filterEntry row .1.3.6.1.4.1.890.1.5.8.45.15.1.1

An entry in filterTable.

Indexes

filterMacAddr filterVid

Column Syntax OID

filterName

.1.3.6.1.4.1.890.1.5.8.45.15.1.1.1

filterActionState

Enumerationr/w

Enumerated Values:

1	discard_source
2	discard_destination
3	both

.1.3.6.1.4.1.890.1.5.8.45.15.1.1.2

filterMacAddr

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.890.1.5.8.45.15.1.1.3

filterVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.15.1.1.4

filterRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.15.1.1.5

mirrorTable

table

.1.3.6.1.4.1.890.1.5.8.45.16.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mirrorTable'

mirrorEntry row .1.3.6.1.4.1.890.1.5.8.45.16.3.1

An entry in mirrorTable.

Indexes

Column Syntax OID

mirrorMirroredState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.16.3.1.1

mirrorDirection

Enumerationr/w

Enumerated Values:

0	ingress
1	egress
2	both

.1.3.6.1.4.1.890.1.5.8.45.16.3.1.2

aggrGroupTable

table

.1.3.6.1.4.1.890.1.5.8.45.17.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::aggrGroupTable'

aggrGroupEntry row .1.3.6.1.4.1.890.1.5.8.45.17.3.1

An entry in aggrGroupTable.

Indexes

aggrGroupIndex

Column Syntax OID

aggrGroupIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.17.3.1.1

aggrGroupState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.17.3.1.2

aggrGroupDynamicState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.17.3.1.3

aggrGroupCriteria

Enumerationr/w

Enumerated Values:

1	src-mac
2	dst-mac
3	src-dst-mac
4	src-ip
5	dst-ip
6	src-dst-ip

.1.3.6.1.4.1.890.1.5.8.45.17.3.1.4

aggrPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.17.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::aggrPortTable'

aggrPortEntry row .1.3.6.1.4.1.890.1.5.8.45.17.4.1

An entry in aggrPortTable.

Indexes

aggrPortDynamicStateTimeout

Column Syntax OID

aggrPortGroup

Enumerationr/w

Enumerated Values:

0	none
1	t1
2	t2
3	t3
4	t4
5	t5
6	t6

.1.3.6.1.4.1.890.1.5.8.45.17.4.1.1

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.17.4.1.2

accessCtlTable

table

.1.3.6.1.4.1.890.1.5.8.45.18.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accessCtlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::accessCtlTable'

accessCtlEntry row .1.3.6.1.4.1.890.1.5.8.45.18.1.1

An entry in accessCtlTable.

Indexes

accessCtlService

Column Syntax OID

accessCtlService

Enumeration

Enumerated Values:

1	telnet
2	ssh
3	ftp
4	http
5	https
6	icmp
7	snmp

.1.3.6.1.4.1.890.1.5.8.45.18.1.1.1

accessCtlEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.18.1.1.2

accessCtlServicePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.18.1.1.3

accessCtlTimeout

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.18.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.8.45.18.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::securedClientTable'

securedClientEntry row .1.3.6.1.4.1.890.1.5.8.45.18.2.1

An entry in securedClientTable.

Indexes

securedClientIndex

Column Syntax OID

securedClientIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.18.2.1.1

securedClientEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.18.2.1.2

securedClientStartIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.18.2.1.3

securedClientEndIp

BRIDGE-MIBdot1dBasePort portQueuingMethodQueue

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.18.2.1.4

securedClientService

Bitsr/w

Enumerated Values:

0	telnet
1	ftp
2	http
3	icmp
4	snmp
5	ssh
6	https

.1.3.6.1.4.1.890.1.5.8.45.18.2.1.5

portQueuingMethodTable

table

.1.3.6.1.4.1.890.1.5.8.45.19.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portQueuingMethodTable'

portQueuingMethodEntry row .1.3.6.1.4.1.890.1.5.8.45.19.2.1

An entry in portQueuingMethodTable.

Indexes

Column	Syntax	OID
portQueuingMethodQueue 0...7	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.19.2.1.1`
portQueuingMethodWeight 0...15	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.19.2.1.2`

portQueuingMethodGeSpqTable

table

.1.3.6.1.4.1.890.1.5.8.45.19.4 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodGeSpqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portQueuingMethodGeSpqTable'

portQueuingMethodGeSpqEntry row .1.3.6.1.4.1.890.1.5.8.45.19.4.1

An entry in portQueuingMethodGeSpqTable.

Indexes

globalDhcpRelayRemoteServerIp

Column Syntax OID

portQueuingMethodGeSpq

GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.

Enumerationr/w

Enumerated Values:

0	none
1	q0
2	q1
3	q2
4	q3
5	q4
6	q5
7	q6
8	q7

.1.3.6.1.4.1.890.1.5.8.45.19.4.1.1

globalDhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.20.1.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk globalDhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::globalDhcpRelayRemoteServerTable'

globalDhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.8.45.20.1.6.1

An entry in globalDhcpRelayRemoteServerTable.

Indexes

Column Syntax OID

globalDhcpRelayRemoteServerIp

globalDhcpRelayRemoteServerRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.20.1.6.1.1

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.20.1.6.1.2

dhcpRelayTable

table

.1.3.6.1.4.1.890.1.5.8.45.20.3.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::dhcpRelayTable'

dhcpRelayEntry row .1.3.6.1.4.1.890.1.5.8.45.20.3.4.1

An entry in dhcpRelayTable.

Indexes

dhcpRelayVid

Column Syntax OID

dhcpRelayOption82Enable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.20.3.4.1.1

dhcpRelayInfoEnable

dhcpRelayVid dhcpRelayRemoteServerIp

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.20.3.4.1.2

dhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.20.3.5 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::dhcpRelayRemoteServerTable'

dhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.8.45.20.3.5.1

An entry in dhcpRelayRemoteServerTable.

Indexes

Column Syntax OID

dhcpRelayVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.20.3.5.1.1

dhcpRelayRemoteServerIp

dhcpRelayRemoteServerRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.20.3.5.1.2

staticRouteIp staticRouteMask

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.20.3.5.1.3

staticRouteTable

table

.1.3.6.1.4.1.890.1.5.8.45.21.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::staticRouteTable'

staticRouteEntry row .1.3.6.1.4.1.890.1.5.8.45.21.2.1

An entry in staticRouteTable.

Indexes

Column Syntax OID

staticRouteName

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.1

staticRouteIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.2

staticRouteMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.3

staticRouteGateway

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.4

staticRouteMetric

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.5

staticRouteRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.21.2.1.6

arpTable

table

.1.3.6.1.4.1.890.1.5.8.45.22.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpTable'

arpEntry row .1.3.6.1.4.1.890.1.5.8.45.22.1.1

An entry in arpTable.

Indexes

arpIpAddr arpMacVid

Column Syntax OID

arpIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.22.1.1.1

arpIpAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.22.1.1.2

arpMacAddr

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.22.1.1.3

arpMacVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.22.1.1.4

arpType

1-static, 2-dynamic

Enumeration

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.890.1.5.8.45.22.1.1.5

portOpModePortTable

table

.1.3.6.1.4.1.890.1.5.8.45.24.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portOpModePortTable'

portOpModePortEntry row .1.3.6.1.4.1.890.1.5.8.45.24.1.1

An entry in portOpModePortTable.

Indexes

portOpModePortSpeedDuplex

Column Syntax OID

Enumerationr/w

Enumerated Values:

0	auto
1	speed_10_half
2	speed_10_full
3	speed_100_half
4	speed_100_full
5	speed_1000_full

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.1

portOpModePortFlowCntl

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.2

portOpModePortName

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.3

portOpModePortModuleType

Enumeration

Enumerated Values:

0	fast_ethernet_10_100
1	gigabit_ethernet_100_1000

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.4

portOpModePortLinkUpType

Enumeration

Enumerated Values:

0	down
1	copper
2	fiber

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.5

portOpModePortIntrusionLock

portOpModePortLBTestStatus

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.6

This entry display latest loopback test status of port while performing loopback test.

Enumeration

Enumerated Values:

0	none
1	under_testing
2	success
3	fail

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.7

portOpModePortCounterReset

This entry resets port counter.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.8.45.24.1.1.8

portBasedVlanPortListTable

table

.1.3.6.1.4.1.890.1.5.8.45.25.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedVlanPortListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portBasedVlanPortListTable'

portBasedVlanPortListEntry row .1.3.6.1.4.1.890.1.5.8.45.25.1.1

An entry in portBasedVlanPortListTable.

Indexes

Column	Syntax	OID
portBasedVlanPortListMembers	Q-BRIDGE-MIBPortListr/w	`.1.3.6.1.4.1.890.1.5.8.45.25.1.1.1`

eventTable

table

.1.3.6.1.4.1.890.1.5.8.45.26.1.1 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::eventTable'

A list of currently active fault events. All faults 
of normal type regardless of their severity level 
are recorded in the event table. When a normal 
type fault is cleared it is deleted from the event 
table.

eventEntry row .1.3.6.1.4.1.890.1.5.8.45.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column Syntax OID

eventSeqNum

This variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.

Sequence number is increm…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.1

eventEventId

This variable represents the event ID which uniquely
identifies the event in the entire system.

EventIdNumber

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.2

eventName

This variable represents the name of the event, for
example 'Ethernet Link Down'

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.3

eventInstanceType

This variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For…

InstanceType

Type Values:

1	unknown
2	node
3	shelf
4	line
5	switch
6	lsp
7	l2Interface
8	l3Interface
9	rowIndex

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.4

eventInstanceId

This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more …

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.5

eventInstanceName

This variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.

DEPENDS ON: eventInstance…

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.6

eventSeverity

This variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention t…

EventSeverity

Type Values:

1	critical
2	major
3	minor
4	informational

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.7

eventSetTime

This table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.

UtcTimeStamp

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.8

eventDescription

This variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no us…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.9

eventServAffective

This variable indicates whether the event is service affective or not

EventServiceAffective

Type Values:

1	noServiceAffected
2	serviceAffected

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.10

eventInstanceIdNumber

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.26.1.1.1.11

multicastPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.28.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::multicastPortTable'

multicastPortEntry row .1.3.6.1.4.1.890.1.5.8.45.28.1.1

An entry in multicastPortTable.

Indexes

multicastPortMaxGroupLimited

Column Syntax OID

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.2

multicastPortMaxOfGroup

0..255

multicastPortIgmpFilteringProfile

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.3

multicastPortThrottlingAction

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.4

multicastPortQuerierMode

Enumerationr/w

Enumerated Values:

1	auto
2	fixed
3	edge

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.5

Specify throttling action for each port

Enumerationr/w

Enumerated Values:

1	deny
2	replace

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.6

multicastPortLeaveMode

Enumerationr/w

Enumerated Values:

0	normal
1	immediate
2	fast

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.7

multicastPortLeaveTimeout

200..6348800

multicastPortFastLeaveTimeout

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.8

200..6348800

multicastStatusVlanID multicastStatusPort multicastStatusGroup

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.28.1.1.9

multicastStatusTable

table

.1.3.6.1.4.1.890.1.5.8.45.29.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::multicastStatusTable'

multicastStatusEntry row .1.3.6.1.4.1.890.1.5.8.45.29.1.1

An entry in multicastStatusTable.

Indexes

Column	Syntax	OID
multicastStatusIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.1.1.1`
multicastStatusVlanID	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.1.1.2`
multicastStatusPort	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.1.1.3`
multicastStatusGroup	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.8.45.29.1.1.4`

igmpSnpCountTable

table

.1.3.6.1.4.1.890.1.5.8.45.29.2 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::igmpSnpCountTable'

A count table of igmp query/report/leave message.

igmpSnpCountEntry row .1.3.6.1.4.1.890.1.5.8.45.29.2.1

An entry in igmpSnpCountTable.

Indexes

igmpSnpCountIndex

Column	Syntax	OID
igmpSnpCountIndex Index of IgmpCountEntry. 0 means total count in whole system	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.1`
igmpSnpV2CountQueryRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.2`
igmpSnpV2CountReportRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.3`
igmpSnpV2CountLeaveRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.4`
igmpSnpV2CountQueryRxDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.5`
igmpSnpV2CountReportRxDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.6`
igmpSnpV2CountLeaveRxDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.7`
igmpSnpV2CountQueryTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.8`
igmpSnpV2CountReportTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.9`
igmpSnpV2CountLeaveTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.10`
igmpSnpV3CountQueryRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.11`
igmpSnpV3CountReportRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.12`
igmpSnpV3CountQueryRxDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.13`
igmpSnpV3CountReportRxDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.14`
igmpSnpV3CountQueryTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.15`
igmpSnpV3CountReportTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.29.2.1.16`

multicastVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.8.45.29.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::multicastVlanStatusTable'

multicastVlanStatusEntry row .1.3.6.1.4.1.890.1.5.8.45.29.3.1

An entry in multicastVlanStatusTable.

Indexes

multicastVlanStatusVlanID

Column Syntax OID

multicastVlanStatusVlanID

igmpFilteringProfileName igmpFilteringProfileStartAddress igmpFilteringProfileEndAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.29.3.1.1

multicastVlanStatusType

Enumeration

Enumerated Values:

1	dynamic
2	mvr
3	static

.1.3.6.1.4.1.890.1.5.8.45.29.3.1.2

multicastVlanQueryPort

Q-BRIDGE-MIBPortList

.1.3.6.1.4.1.890.1.5.8.45.29.3.1.3

igmpFilteringProfileTable

table

.1.3.6.1.4.1.890.1.5.8.45.30.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpFilteringProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::igmpFilteringProfileTable'

igmpFilteringProfileEntry row .1.3.6.1.4.1.890.1.5.8.45.30.2.1

An entry in igmpFilteringProfileTable.

Indexes

Column Syntax OID

igmpFilteringProfileName

igmpFilteringProfileStartAddress

.1.3.6.1.4.1.890.1.5.8.45.30.2.1.1

igmpFilteringProfileEndAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.30.2.1.2

igmpFilteringProfileRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.30.2.1.3

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.30.2.1.4

mvrTable

table

.1.3.6.1.4.1.890.1.5.8.45.31.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mvrTable'

mvrEntry row .1.3.6.1.4.1.890.1.5.8.45.31.2.1

An entry in mvrTable.

Indexes

mvrVlanID

Column Syntax OID

mvrVlanID

1..4094

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.31.2.1.1

mvrName

.1.3.6.1.4.1.890.1.5.8.45.31.2.1.2

mvrMode

Enumerationr/w

Enumerated Values:

0	dynamic
1	compatible

.1.3.6.1.4.1.890.1.5.8.45.31.2.1.3

mvrRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.31.2.1.4

mvr8021pPriority

Set the 802.1p priority of control messages within MVR (0~7)

mvrVlanID BRIDGE-MIBdot1dBasePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.31.2.1.5

mvrPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.31.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mvrPortTable'

mvrPortEntry row .1.3.6.1.4.1.890.1.5.8.45.31.3.1

An entry in mvrPortTable.

Indexes

Column Syntax OID

mvrPortRole

Enumerationr/w

Enumerated Values:

1	none
2	source_port
3	receiver_port

.1.3.6.1.4.1.890.1.5.8.45.31.3.1.1

mvrPortTagging

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.31.3.1.2

mvrGroupTable

table

.1.3.6.1.4.1.890.1.5.8.45.31.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mvrGroupTable'

mvrGroupEntry row .1.3.6.1.4.1.890.1.5.8.45.31.5.1

An entry in mvrGroupTable.

Indexes

mvrVlanID mvrGroupName

Column Syntax OID

mvrGroupName

.1.3.6.1.4.1.890.1.5.8.45.31.5.1.1

mvrGroupStartAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.31.5.1.2

mvrGroupEndAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.31.5.1.3

mvrGroupRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.31.5.1.4

clusterManagerTable

table

.1.3.6.1.4.1.890.1.5.8.45.32.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterManagerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::clusterManagerTable'

clusterManagerEntry row .1.3.6.1.4.1.890.1.5.8.45.32.1.2.1

An entry in clusterManagerTable.

Indexes

clusterManagerVid

Column Syntax OID

clusterManagerVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.32.1.2.1.1

clusterManagerName

.1.3.6.1.4.1.890.1.5.8.45.32.1.2.1.2

clusterManagerRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.32.1.2.1.3

clusterMemberTable

table

.1.3.6.1.4.1.890.1.5.8.45.32.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::clusterMemberTable'

clusterMemberEntry row .1.3.6.1.4.1.890.1.5.8.45.32.2.2.1

An entry in clusterMemberTable.

Indexes

clusterMemberMac

Column Syntax OID

clusterMemberMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.32.2.2.1.1

clusterMemberName

.1.3.6.1.4.1.890.1.5.8.45.32.2.2.1.2

clusterMemberModel

.1.3.6.1.4.1.890.1.5.8.45.32.2.2.1.3

clusterMemberPassword

.1.3.6.1.4.1.890.1.5.8.45.32.2.2.1.4

clusterMemberRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.32.2.2.1.5

clusterCandidateTable

table

.1.3.6.1.4.1.890.1.5.8.45.32.3.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterCandidateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::clusterCandidateTable'

clusterCandidateEntry row .1.3.6.1.4.1.890.1.5.8.45.32.3.1.1

An entry in clusterCandidateTable.

Indexes

clusterCandidateMac

Column	Syntax	OID
clusterCandidateMac	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.8.45.32.3.1.1.1`
clusterCandidateName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.8.45.32.3.1.1.2`
clusterCandidateModel	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.8.45.32.3.1.1.3`

clusterStatusMemberTable

table

.1.3.6.1.4.1.890.1.5.8.45.32.4.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterStatusMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::clusterStatusMemberTable'

clusterStatusMemberEntry row .1.3.6.1.4.1.890.1.5.8.45.32.4.4.1

An entry in clusterStatusMemberTable.

Indexes

clusterStatusMemberMac

Column Syntax OID

clusterStatusMemberMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.32.4.4.1.1

clusterStatusMemberName

.1.3.6.1.4.1.890.1.5.8.45.32.4.4.1.2

clusterStatusMemberModel

clusterStatusMemberStatus

.1.3.6.1.4.1.890.1.5.8.45.32.4.4.1.3

Enumeration

Enumerated Values:

0	error
1	online
2	offline

.1.3.6.1.4.1.890.1.5.8.45.32.4.4.1.4

sysLogTypeTable

table

.1.3.6.1.4.1.890.1.5.8.45.33.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::sysLogTypeTable'

sysLogTypeEntry row .1.3.6.1.4.1.890.1.5.8.45.33.2.1

An entry in sysLogTypeTable.

Indexes

sysLogTypeIndex

Column Syntax OID

sysLogTypeIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.33.2.1.1

sysLogTypeName

.1.3.6.1.4.1.890.1.5.8.45.33.2.1.2

sysLogTypeState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.33.2.1.3

sysLogTypeFacility

Enumerationr/w

Enumerated Values:

0	local_user0
1	local_user1
2	local_user2
3	local_user3
4	local_user4
5	local_user5
6	local_user6
7	local_user7

.1.3.6.1.4.1.890.1.5.8.45.33.2.1.4

sysLogServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.33.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::sysLogServerTable'

sysLogServerEntry row .1.3.6.1.4.1.890.1.5.8.45.33.3.1

An entry in sysLogServerTable.

Indexes

sysLogServerAddress

Column Syntax OID

sysLogServerAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.33.3.1.1

sysLogServerLogLevel

Enumerationr/w

Enumerated Values:

0	level0
1	level0-1
2	level0-2
3	level0-3
4	level0-4
5	level0-5
6	level0-6
7	level0-7

.1.3.6.1.4.1.890.1.5.8.45.33.3.1.2

sysLogServerRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.33.3.1.3

diffservMapTable

table

.1.3.6.1.4.1.890.1.5.8.45.34.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::diffservMapTable'

diffservMapEntry row .1.3.6.1.4.1.890.1.5.8.45.34.2.1

An entry in diffservMapTable.

Indexes

diffservMapDscp

Column	Syntax	OID
diffservMapDscp 0-63	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.34.2.1.1`
diffservMapPriority 0-7	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.34.2.1.2`

diffservPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.34.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::diffservPortTable'

diffservPortEntry row .1.3.6.1.4.1.890.1.5.8.45.34.3.1

An entry in diffservPortTable.

Indexes

Column Syntax OID

diffservPortState

protoBasedVlanPort protoBasedVlanPacketType protoBasedVlanEtherType

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.34.3.1.1

protoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.35.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk protoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::protoBasedVlanTable'

protoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.35.1.1

An entry in protoBasedVlanTable.

Indexes

Column Syntax OID

protoBasedVlanPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.1

protoBasedVlanPacketType

Enumeration

Enumerated Values:

1	etherII
2	snap
3	llc

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.2

protoBasedVlanEtherType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.3

protoBasedVlanName

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.4

protoBasedVlanVid

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.5

protoBasedVlanPriority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.6

protoBasedVlanState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.35.1.1.7

mrstpBridgeTable

table

.1.3.6.1.4.1.890.1.5.8.45.36.1.1 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mrstpBridgeTable'

mrstpBridgeEntry row .1.3.6.1.4.1.890.1.5.8.45.36.1.1.1

An entry in mrstpBridgeTable.

Indexes

mrstpBridgeIndex

Column Syntax OID

mrstpBridgeIndex

The tree index of the MRSTP.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.1

mrstpState

Enabled/disabled on the mrstp bridge.

mrstpProtocolSpecification

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.2

An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…

Enumeration

Enumerated Values:

1	unknown
2	decLb100
3	ieee8021d

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.3

mrstpPriority

The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.4

mrstpTimeSinceTopologyChange

The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.

RFC1155-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.5

mrstpTopChanges

The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.6

mrstpDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originat…

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.7

mrstpRootCost

The cost of the path to the root as seen from
this bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.8

mrstpRootPort

The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.9

mrstpMaxAge

The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.10

mrstpHelloTime

The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.11

mrstpHoldTime

This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.12

mrstpForwardDelay

This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.13

mrstpBridgeMaxAge

The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeHelloTime. The granularity of th…

Integer32r/w

Constraints:
range: 600-4000

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.14

mrstpBridgeHelloTime

The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempte…

Integer32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.15

mrstpBridgeForwardDelay

The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeMaxAge. The granularity o…

Integer32r/w

Constraints:
range: 400-3000

.1.3.6.1.4.1.890.1.5.8.45.36.1.1.1.16

mrstpPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.36.1.2 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mrstpPortTable'

A table that contains port-specific information
for the Spanning Tree Protocol.

mrstpPortEntry row .1.3.6.1.4.1.890.1.5.8.45.36.1.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

mrstpPort

Column Syntax OID

mrstpPort

The port number of the port for which this entry
contains Spanning Tree Protocol management
information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.1

mrstpPortPriority

The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mrstpPort.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.2

mrstpPortState

The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.3

mrstpPortEnable

The enabled/disabled status of the port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.4

mrstpPortPathCost

The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.5

mrstpPortDesignatedRoot

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.6

mrstpPortDesignatedCost

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

mrstpPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.7

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

mrstpPortForwardTransitions

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.8

mrstpPortDesignatedPort

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.9

The number of times this port has transitioned
from the Learning state to the Forwarding state.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.10

mrstpPortOnBridgeIndex

Indetify the bridge index that this port joined to in MRSTP.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.36.1.2.1.11

classifierRuleTable

table

.1.3.6.1.4.1.890.1.5.8.45.37.1 · 1 row entry · 19 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk classifierRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::classifierRuleTable'

classifierRuleEntry row .1.3.6.1.4.1.890.1.5.8.45.37.1.1

An entry in classifierRuleTable.

Indexes

classifierName

Column Syntax OID

classifierName

Name of classifier rule.

P-BRIDGE-MIBEnabledStatus

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.1

classifierEnable

Classifier rule enabled/disabled.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.2

classifierPacketFormat

Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).

Enumeration

Enumerated Values:

1	all
2	ethernetII-untagged
3	ethernetII-tagged
4	ethernet802_3-untagged
5	ethernet802_3-tagged

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.3

classifierVlanId

Vlan id for classifer rule, 1~4094. Value 0 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.4

classifier8021pPriority

802.1p priority for classifier rule, 0~7. Value -1 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.5

classifierEtherType

Ether type for classifier rule, in decimal expression. Value 65535 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.6

classifierSrcMAC

Source mac address for classifier rule. 00:00:00:00:00:00 means any

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.7

classifierIncomingPort

Incoming Port for classifier rule. Value 65536 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.8

classifierDstMAC

Destination mac address for classifier rule. 00:00:00:00:00:00 means any

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.9

classifierDSCP

DSCP for classifier rule. Value -1 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.10

classifierIpProtocol

IP Protocol for classifier rule. Value 255 means any

P-BRIDGE-MIBEnabledStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.11

classifierEstablishOnly

IP Protocol for EstablishOnly in classifier rule

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.12

classifierSrcIp

Source IP address for classifier rule. 0.0.0.0 means any

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.13

classifierSrcIpMask

Source IP Mask for classifier rule.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.14

classifierSrcSocket

Source Socket Number for classifier rule. Value 0 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.15

classifierDstIp

Destination IP address for classifier rule. 0.0.0.0 means any

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.16

classifierDstIpMask

Destination IP Mask for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.17

classifierDstSocket

Destination Socket Number for classifier rule. Value 0 means any

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.18

classifierRowstatus

Row Status for classifier rule

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.37.1.1.19

policyTable

table

.1.3.6.1.4.1.890.1.5.8.45.38.1 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk policyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::policyTable'

policyEntry row .1.3.6.1.4.1.890.1.5.8.45.38.1.1

An entry in policyTable.

Indexes

policyName

Column Syntax OID

policyName

Name of policy rule.

P-BRIDGE-MIBEnabledStatus

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.1

policyEnable

Policy rule enabled/disabled.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.2

policyClassifier

Classifier of policy rule.

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.3

policyEgressPort

Egress Port for policy rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.5

policy8021pPriority

802.1p priority for policy rule, 0~7.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.7

policyDSCP

DSCP for policy rule.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.8

policyTOS

TOS for policy rule, 0~7

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.9

policyBandwidth

Bandwidth for policy rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.10

policyOutOfProfileDSCP

Out Of Profile DSCP for policy rule.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.11

policyForwardingAction

Forwarding Action for policy rule

Enumeration

Enumerated Values:

1	no-change
2	discard-the-packet
3	do-not-drop-the-matching-frame-previously-marked-for-dopping

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.12

policyPriorityAction

Priority Action for policy rule

Enumeration

Enumerated Values:

1	no-change
2	set-the-packets-802_1-priority
3	send-the-packet-to-priority-queue
4	replace-the-802_1-priority-field-with-the-IP-TOS-value

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.13

policyDiffServAction

DiffServ Action for policy rule

Enumeration

Enumerated Values:

1	no-change
2	set-the-packets-TOS-field
3	replace-the-IP-TOS-field-with-the-802_1-priority-value
4	set-the-Diffserv-Codepoint-field-in-the-frame

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.14

policyOutgoingAction

Outgoing Action for policy rule. Started bit is from MSB bit7 (bit7~bit0).

Bitsr/w

Enumerated Values:

0	send-the-packet-to-the-mirror-port
1	send-the-packet-to-the-egress-port
2	send-the-matching-frames-to-the-egress-port
3	set-the-packets-VLAN-ID

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.15

policyMeteringEnable

Metering for Policy rule enabled/disabled.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.16

policyOutOfProfileAction

Out Of Profile Action for policy rule. Started bit is from MSB bit7 (bit7~bit0).

Bitsr/w

Enumerated Values:

0	drop-the-packet
1	change-the-DSCP-value
2	set-Out-Drop-Precedence
3	do-not-drop-the-matching-frame-previously-marked-for-dropping

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.17

policyRowstatus

Row Status for policy rule

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.38.1.1.18

dhcpSnpVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.100.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::dhcpSnpVlanTable'

dhcpSnpVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.100.1.1

Indexes

dhcpSnpVlanEntryVid

Column Syntax OID

dhcpSnpVlanEntryVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.100.1.1.1

dhcpSnpVlanEntryEnable

dhcpSnpVlanEntryOption82Enable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.100.1.1.2

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.100.1.1.3

dhcpSnpVlanEntryInfo

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.100.1.1.4

dhcpSnpPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.100.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::dhcpSnpPortTable'

dhcpSnpPortEntry row .1.3.6.1.4.1.890.1.5.8.45.100.2.1

Indexes

dhcpSnpPortEntryPort

Column Syntax OID

dhcpSnpPortEntryPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.100.2.1.1

dhcpSnpPortEntryTrust

dhcpSnpBindEntryMac dhcpSnpBindEntryVid

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.100.2.1.2

dhcpSnpPortEntryRate

0 means unlimited

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.890.1.5.8.45.100.2.1.3

dhcpSnpBindTable

table

.1.3.6.1.4.1.890.1.5.8.45.100.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::dhcpSnpBindTable'

dhcpSnpBindEntry row .1.3.6.1.4.1.890.1.5.8.45.100.3.1

Indexes

Column Syntax OID

dhcpSnpBindEntryMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.1

dhcpSnpBindEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.2

dhcpSnpBindEntryIP

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.3

dhcpSnpBindEntryLease

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.4

dhcpSnpBindEntryType

Enumeration

Enumerated Values:

dynamic

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.5

dhcpSnpBindEntryPort

ipsgEntryMac ipsgEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.100.3.1.6

ipsgTable

table

.1.3.6.1.4.1.890.1.5.8.45.101.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipsgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::ipsgTable'

ipsgEntry row .1.3.6.1.4.1.890.1.5.8.45.101.1.1

Indexes

Column Syntax OID

ipsgEntryMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.1

ipsgEntryVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.2

ipsgEntryIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.3

ipsgEntryLease

second

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.4

ipsgEntryType

Enumeration

Enumerated Values:

1	static
2	dhcp

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.5

ipsgEntryPort

0 means any port

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.6

ipsgEntryState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.101.1.1.7

arpInspectVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.102.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpInspectVlanTable'

arpInspectVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.102.1.4.1

Indexes

arpInspectVlanVid

Column Syntax OID

arpInspectVlanVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.102.1.4.1.1

arpInspectVlanLog

Enumerationr/w

Enumerated Values:

1	all
2	none
3	permit
4	deny

.1.3.6.1.4.1.890.1.5.8.45.102.1.4.1.2

arpInspectVlanStatus

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.102.1.4.1.3

arpInspectPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.102.1.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpInspectPortTable'

arpInspectPortEntry row .1.3.6.1.4.1.890.1.5.8.45.102.1.5.1

Indexes

arpInspectPortIndex

Column Syntax OID

arpInspectPortIndex

arpInspectFilterMac arpInspectFilterVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.1.5.1.1

arpInspectPortTrust

Enumerationr/w

Enumerated Values:

1	trusted
2	untrusted

.1.3.6.1.4.1.890.1.5.8.45.102.1.5.1.2

arpInspectPortRate

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.890.1.5.8.45.102.1.5.1.3

arpInspectPortInterval

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.890.1.5.8.45.102.1.5.1.4

arpInspectFilterTable

table

.1.3.6.1.4.1.890.1.5.8.45.102.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpInspectFilterTable'

arpInspectFilterEntry row .1.3.6.1.4.1.890.1.5.8.45.102.2.3.1

Indexes

Column Syntax OID

arpInspectFilterMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.1

arpInspectFilterVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.2

arpInspectFilterPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.3

arpInspectFilterExpiry

arpInspectFilterRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.4

arpInspectFilterReason

Enumeration

Enumerated Values:

1	macVid
2	port
3	ip

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.5

arpInspectLogMac arpInspectLogVid arpInspectLogPort arpInspectLogIp arpInspectLogReason

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.102.2.3.1.6

arpInspectLogTable

table

.1.3.6.1.4.1.890.1.5.8.45.102.2.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpInspectLogTable'

arpInspectLogEntry row .1.3.6.1.4.1.890.1.5.8.45.102.2.4.1

Indexes

Column Syntax OID

arpInspectLogMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.1

arpInspectLogVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.2

arpInspectLogPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.3

arpInspectLogIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.4

arpInspectLogNumPkt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.5

arpInspectLogReason

Enumeration

Enumerated Values:

1	deny
2	denyStatic
3	denyDHCP
4	permitStatic
5	permitDHCP

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.6

arpInspectLogTime

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.890.1.5.8.45.102.2.4.1.7

arpInspectStatisticsTable

table

.1.3.6.1.4.1.890.1.5.8.45.102.2.5 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::arpInspectStatisticsTable'

arpInspectStatisticsEntry row .1.3.6.1.4.1.890.1.5.8.45.102.2.5.1

Indexes

arpInspectStatisticsVid

Column Syntax OID

arpInspectStatisticsVid

arpInspectStatisticsReceived

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.1

arpInspectStatisticsRequest

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.2

arpInspectStatisticsReply

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.3

arpInspectStatisticsForward

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.4

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.5

arpInspectStatisticsDrop

arpInspectStatisticsClear

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.6

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.102.2.5.1.7

trTCMPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.103.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk trTCMPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::trTCMPortTable'

trTCMPortEntry row .1.3.6.1.4.1.890.1.5.8.45.103.3.1

An entry in trTCMPortTable.

Indexes

Column Syntax OID

trTCMPortState

Two-rate three color marker enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.1

trTCMPortCIR

Allowed CIR in pkts/s.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.2

trTCMPortPIR

Allowed PIR in pkts/s.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.3

trTCMPortDscpGreen

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.4

trTCMPortDscpYellow

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.5

trTCMPortDscpRed

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.103.3.1.6

loopGuardPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.104.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::loopGuardPortTable'

loopGuardPortEntry row .1.3.6.1.4.1.890.1.5.8.45.104.2.1

An entry in loopGuardPortTable.

Indexes

Column Syntax OID

loopGuardPortState

subnetBasedVlanSrcIp subnetBasedVlanSrcMaskBit

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.104.2.1.1

subnetBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.105.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::subnetBasedVlanTable'

subnetBasedVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.105.3.1

An entry in subnetBasedVlanTable.

Indexes

Column Syntax OID

subnetBasedVlanSrcIp

source ip for subnet-based vlan entry

subnetBasedVlanSrcMaskBit

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.1

source ip mask-bits for subnet-based vlan entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.2

subnetBasedVlanName

name for subnet-based vlan entry

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.3

subnetBasedVlanVid

vid for subnet-based vlan entry

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.4

subnetBasedVlanPriority

priority for subnet-based vlan entry

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.5

subnetBasedVlanEntryState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.105.3.1.6

macAuthenticationPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.106.5 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macAuthenticationPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::macAuthenticationPortTable'

macAuthenticationPortEntry row .1.3.6.1.4.1.890.1.5.8.45.106.5.1

An entry in macAuthenticationPortTable.

Indexes

macAuthenticationPortState

Column Syntax OID

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.106.5.1.1

mstMapTable

table

.1.3.6.1.4.1.890.1.5.8.45.107.20 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mstMapTable'

This table contains one entry for each instance of MSTP.

mstMapEntry row .1.3.6.1.4.1.890.1.5.8.45.107.20.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstMapIndex

Column Syntax OID

mstMapIndex

Uniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. When SET operation

MstiOrCistInstanceIndex

Type Constraints:
range: 0..16

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.1

mstMapVlans1k

A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.2

mstMapVlans2k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.3

mstMapVlans3k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.4

mstMapVlans4k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.5

mstMapRowStatus

mstpPortOperPointToPointMAC

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.107.20.1.6

mstVlanTable

table

.1.3.6.1.4.1.890.1.5.8.45.107.30 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mstVlanTable'

This table contains one entry for each VlanId.

mstVlanEntry row .1.3.6.1.4.1.890.1.5.8.45.107.30.1

Information regarding the instance to which each Vlan is mapped.

Indexes

mstVlanIndex

Column	Syntax	OID
mstVlanIndex The VlanId for which this entry contains the instance mapped.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.890.1.5.8.45.107.30.1.1`
mstVlanMstIndex An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped	MstiOrCistInstanceIndex Type Constraints: `range: 0..16`	`.1.3.6.1.4.1.890.1.5.8.45.107.30.1.2`

mstpPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.107.40 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mstpPortTable'

A table that contains generic information about
every port that is associated with this bridge.

mstpPortEntry row .1.3.6.1.4.1.890.1.5.8.45.107.40.1

A list of information for each port of the
bridge.

Indexes

mstpPortIndex

Column Syntax OID

mstpPortIndex

A unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.8.45.107.40.1.1

mstpPortOperEdgePort

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.8.45.107.40.1.2

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.8.45.107.40.1.3

mstpXstTable

table

.1.3.6.1.4.1.890.1.5.8.45.107.50 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mstpXstTable'

mstpXstEntry row .1.3.6.1.4.1.890.1.5.8.45.107.50.1

Indexes

mstpXstId

Column	Syntax	OID
mstpXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: `range: 0..16`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.1`
mstpXstBridgePriority Bridge priority, in steps of 4096.	Integer32r/w Constraints: `range: 0-61440`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.2`
mstpXstBridgeId .	BRIDGE-MIBBridgeId Type Constraints: `range: 8`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.3`
mstpXstInternalRootCost .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.4`
mstpXstRootPort .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.5`
mstpXstTimeSinceTopologyChange .	RFC1155-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.6`
mstpXstTopologyChangesCount .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.8.45.107.50.1.7`

mstpXstPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.107.60 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::mstpXstPortTable'

mstpXstPortEntry row .1.3.6.1.4.1.890.1.5.8.45.107.60.1

Indexes

mstpXstPortXstId mstpXstPortIndex

Column Syntax OID

mstpXstPortXstId

0 means CIST.

MstiOrCistInstanceIndex

Type Constraints:
range: 0..16

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.1

mstpXstPortIndex

The value of mstpPortIndex of the Port
in mstpPortTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.2

mstpXstPortEnable

mstpXstPortDesignatedRoot

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.3

mstpXstPortPriority

Port priority, in steps of 16.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.4

mstpXstPortPathCost

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.5

mstpXstPortState

Enumeration

Enumerated Values:

0	disabled
1	discarding
2	learning
3	forwarding
4	unknown

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.6

mstpXstPortDesignatedCost

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.7

mstpXstPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.8

mstpXstPortDesignatedPort

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.9

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.107.60.1.10

radiusAuthServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.108.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::radiusAuthServerTable'

radiusAuthServerEntry row .1.3.6.1.4.1.890.1.5.8.45.108.1.3.1

An entry in radiusAuthServerTable.

Indexes

radiusAuthServerIndex

Column	Syntax	OID
radiusAuthServerIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.108.1.3.1.1`
radiusAuthServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.8.45.108.1.3.1.2`
radiusAuthServerUdpPort	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.108.1.3.1.3`
radiusAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.8.45.108.1.3.1.4`

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.108.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::radiusAcctServerTable'

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.8.45.108.2.2.1

An entry in radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column	Syntax	OID
radiusAcctServerIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.108.2.2.1.1`
radiusAcctServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.8.45.108.2.2.1.2`
radiusAcctServerUdpPort	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.108.2.2.1.3`
radiusAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.8.45.108.2.2.1.4`

tacacsAuthServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.109.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::tacacsAuthServerTable'

tacacsAuthServerEntry row .1.3.6.1.4.1.890.1.5.8.45.109.1.3.1

An entry in tacacsAuthServerTable.

Indexes

tacacsAuthServerIndex

Column	Syntax	OID
tacacsAuthServerIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.109.1.3.1.1`
tacacsAuthServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.8.45.109.1.3.1.2`
tacacsAuthServerTcpPort	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.109.1.3.1.3`
tacacsAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.8.45.109.1.3.1.4`

tacacsAcctServerTable

table

.1.3.6.1.4.1.890.1.5.8.45.109.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::tacacsAcctServerTable'

tacacsAcctServerEntry row .1.3.6.1.4.1.890.1.5.8.45.109.2.2.1

An entry in tacacsAcctServerTable.

Indexes

tacacsAcctServerIndex

Column	Syntax	OID
tacacsAcctServerIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.109.2.2.1.1`
tacacsAcctServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.8.45.109.2.2.1.2`
tacacsAcctServerTcpPort	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.8.45.109.2.2.1.3`
tacacsAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.8.45.109.2.2.1.4`

authenticationTypeTable

table

.1.3.6.1.4.1.890.1.5.8.45.110.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authenticationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::authenticationTypeTable'

authenticationTypeEntry row .1.3.6.1.4.1.890.1.5.8.45.110.1.1.1

An entry in authenticationTypeTable.

Indexes

authenticationTypeName

Column	Syntax	OID
authenticationTypeName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.8.45.110.1.1.1.1`
authenticationTypeMethodList	OctetStringr/w	`.1.3.6.1.4.1.890.1.5.8.45.110.1.1.1.2`

accountingTypeTable

table

.1.3.6.1.4.1.890.1.5.8.45.110.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accountingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::accountingTypeTable'

accountingTypeEntry row .1.3.6.1.4.1.890.1.5.8.45.110.2.2.1

An entry in accountingTypeTable.

Indexes

accountingTypeName

Column Syntax OID

accountingTypeName

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.1

accountingTypeActive

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.2

accountingTypeBroadcast

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.3

accountingTypeMode

Enumerationr/w

Enumerated Values:

1	start-stop
2	stop-only
255	not-available

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.4

accountingTypeMethod

Enumerationr/w

Enumerated Values:

1	radius
2	tacacs

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.5

accountingTypePrivilege

Enumerationr/w

Enumerated Values:

0	privilege-0
1	privilege-1
2	privilege-2
3	privilege-3
4	privilege-4
5	privilege-5
6	privilege-6
7	privilege-7
8	privilege-8
9	privilege-9
10	privilege-10
11	privilege-11
12	privilege-12
13	privilege-13
14	privilege-14
255	not-available

.1.3.6.1.4.1.890.1.5.8.45.110.2.2.1.6

authorizationTypeTable

table

.1.3.6.1.4.1.890.1.5.8.45.110.3.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authorizationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::authorizationTypeTable'

authorizationTypeEntry row .1.3.6.1.4.1.890.1.5.8.45.110.3.1.1

An entry in authorizationTypeTable.

Indexes

authorizationTypeName

Column Syntax OID

authorizationTypeName

.1.3.6.1.4.1.890.1.5.8.45.110.3.1.1.1

authorizationTypeActive

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.110.3.1.1.2

authorizationTypeMethod

Enumerationr/w

Enumerated Values:

1	radius
2	tacacs

.1.3.6.1.4.1.890.1.5.8.45.110.3.1.1.3

portIsolationTable

table

.1.3.6.1.4.1.890.1.5.8.45.112.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portIsolationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::portIsolationTable'

portIsolationEntry row .1.3.6.1.4.1.890.1.5.8.45.112.1.1

An entry in portIsolationTable.

Indexes

Column Syntax OID

portIsolationState

Port isolation enabled/disabled on the port.
Enable(1) to be isolated and not exchange packets.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.112.1.1.1

l2ptTable

table

.1.3.6.1.4.1.890.1.5.8.45.115.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk l2ptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::l2ptTable'

l2ptEntry row .1.3.6.1.4.1.890.1.5.8.45.115.3.1

An entry in l2ptTable.

Indexes

Column Syntax OID

l2ptMode

L2PT port role on the port

Enumerationr/w

Enumerated Values:

1	access
2	tunnel

.1.3.6.1.4.1.890.1.5.8.45.115.3.1.3

vlanMappingPortTable

table

.1.3.6.1.4.1.890.1.5.8.45.116.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::vlanMappingPortTable'

vlanMappingPortEntry row .1.3.6.1.4.1.890.1.5.8.45.116.2.1

An entry in vlanMappingPortTable.

Indexes

Column Syntax OID

vlanMappingPortState

vlanMappingRulePort vlanMappingRuleVid

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.8.45.116.2.1.1

vlanMappingRuleTable

table

.1.3.6.1.4.1.890.1.5.8.45.116.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::vlanMappingRuleTable'

vlanMappingRuleEntry row .1.3.6.1.4.1.890.1.5.8.45.116.3.1

An entry in vlan-mapping rule table

Indexes

Column Syntax OID

vlanMappingRuleName

The name of vlan-mapping entry

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.1

vlanMappingRulePort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.2

vlanMappingRuleVid

inner vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.3

vlanMappingRuleTransVid

translated vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.4

vlanMappingRulePriority

priority

Enumerationr/w

Enumerated Values:

0	prioriry-0
1	prioriry-1
2	prioriry-2
3	prioriry-3
4	prioriry-4
5	prioriry-5
6	prioriry-6
7	prioriry-7

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.5

vlanMappingRuleRowStatus

transceiverSerialInfoEntryPort

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.8.45.116.3.1.6

transceiverSerialInfoTable

table

.1.3.6.1.4.1.890.1.5.8.45.117.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverSerialInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES3728-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES3728-MIB::transceiverSerialInfoTable'

transceiverSerialInfoEntry row .1.3.6.1.4.1.890.1.5.8.45.117.1.1

An entry in transceiverSerialInfoTable.

Indexes

Column Syntax OID

transceiverSerialInfoEntryPort

Index of transceiverSerialInfo. It is referred to dot1dBasePort

transceiverSerialInfoEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.1

Transceiver module status.

Enumeration

Enumerated Values:

1	ok_with_DDM
2	ok_without_DDM
3	nonoperational

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.2

transceiverSerialInfoEntryVendor

Transceiver module vendor name.

transceiverSerialInfoEntryPartNo

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.3

Part number provided by transceiver module vendor.

transceiverSerialInfoEntrySerialNo

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.4

Serial number provided by transceiver module vendor.

transceiverSerialInfoEntryRevision

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.5

Revision level for part number provided by transceiver module vendor.

transceiverSerialInfoEntryDateCode

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.6

Transceiver module vendor's manufacturing date code

transceiverSerialInfoEntryTransceiver

.1.3.6.1.4.1.890.1.5.8.45.117.1.1.7

Transceiver module type names