ZYXEL-IPV6-SNOOPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

zyxelIpv6SnoopingPolicyTable

table
.1.3.6.1.4.1.890.1.15.3.109.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelIpv6SnoopingPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-IPV6-SNOOPING-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-IPV6-SNOOPING-MIB::zyxelIpv6SnoopingPolicyTable' 
The table maintains IPv6 snooping policy configuration.
zyxelIpv6SnoopingPolicyEntry row .1.3.6.1.4.1.890.1.15.3.109.1.2.1
An entry contains IPv6 snooping policy configuration.
Indexes
Column Syntax OID
zyIpv6SnoopingPolicyName
The name of IPv6 snooping policy.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.109.1.2.1.1
zyIpv6SnoopingPolicyProtocol
Select the protocol is snooped in the policy.
Bitsr/w
Enumerated Values:
0dhcp
 .1.3.6.1.4.1.890.1.15.3.109.1.2.1.2
zyIpv6SnoopingPolicyPrefixGleanState
Enable/Disable the option to glean IPv6 prefix in DHCP-PD packet
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.109.1.2.1.3
zyIpv6SnoopingPolicyLimitAddressCount
Set this field to limit the number of snooped addresses.
For example, if you set this field to 5, then only the devices
with these five learned addresses may snooped on the policy at any one time.
A sixth device woul…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.109.1.2.1.4
zyIpv6SnoopingPolicyRowStatus
This object allows an IPv6 snooping policy entry to be created and deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.109.1.2.1.100

zyxelIpv6SnoopingPolicyIfTable

table
.1.3.6.1.4.1.890.1.15.3.109.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelIpv6SnoopingPolicyIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-IPV6-SNOOPING-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-IPV6-SNOOPING-MIB::zyxelIpv6SnoopingPolicyIfTable' 
The table maintains IPv6 snooping policy interface VLAN configuration
zyxelIpv6SnoopingPolicyIfEntry row .1.3.6.1.4.1.890.1.15.3.109.1.3.1
An entry contains IPv6 snooping policy interface VLAN configuration.
Indexes
Column Syntax OID
zyIpv6SnoopingPolicyIfIndex
The interface VLAN of IPv6. It is created by zyxelIf module.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.109.1.3.1.1
zyIpv6SnoopingPolicyIfAttachPolicy
Select the policy attach to the interface VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.109.1.3.1.2