ZYXEL-IESCOMMON-MIB Table View

The table which contains the chassis information in IES-2000/3000
system

iesChassisEntry row .1.3.6.1.4.1.890.1.5.13.1.1.2.1

Indexes

iesChassisId

Column	Syntax	OID
iesChassisId The Chassis ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.2.1.1
iesChassisFrameNumber The Frame ID	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.2.1.2
iesChassisSerialNumber The Chassis Serial Number	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.1.2.1.3
iesChassisNumber The Chassis Number which is defined by the system administrator for management purpose	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.2.1.4
iesChassisStatus The current status of the chassis.	Enumeration Enumerated Values: 1 empty 2 up 3 down 4 testing	.1.3.6.1.4.1.890.1.5.13.1.1.2.1.5

The table which contains the slot information in a chassis of
IES-2000/3000 system

iesSlotEntry row .1.3.6.1.4.1.890.1.5.13.1.1.3.1

Indexes

iesChassisId iesSlotId

Column	Syntax	OID
iesSlotId Identity of the slot	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.1
iesSlotModuleType Card type of the plug-in card in IES-2000/3000.	Enumeration Enumerated Values: 1 unknown 2 msc1000-L2 3 msc1000-ML 4 alc1024-61 5 vlc1012 6 slc1024 7 alc1024-63 8 msc1000A 9 vlc1124 10 alc1224-71 11 alc1224-73 12 slc1224-22 13 alc1224-51 14 alc1224-53	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.2
iesSlotModuleDescr The descriptions of the plug-in card in IES-2000/3000.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.3
iesSlotModuleFWVersion The firmware version of the plug-in card in IES-2000/3000.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.4
iesSlotModuleDriverVersion The DSL driver of the plug-in card in IES-2000/3000.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.5
iesSlotModuleModemCodeVersion The DSL modem code version of the plug-in card in IES-2000/3000	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.6
iesSlotModuleStatus The module state of the plug-in card in IES-2000/3000	Enumeration Enumerated Values: 1 empty 2 up 3 down 4 testing 5 standby	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.7
iesSlotModuleAlarmStatus This variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.13.1.1.3.1.8

The table contains port configuration information in MSC1000.

iesMscPortConfEntry row .1.3.6.1.4.1.890.1.5.13.1.1.4.1

Indexes

iesChassisId iesSlotId iesMscPortId

Column	Syntax	OID
iesMscPortId Identity of the extension slot in MSC1000.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.1
iesMscPortType Port type of the extension slot in MSC1000.	Enumeration Enumerated Values: 1 unknown 2 e1000BaseT 3 e1000BaseLX 4 e1000BaseSX 5 e100BaseFX 6 e100BaseTX 7 e1000BaseGBIC	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.2
iesMscPortIfIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.3
iesMscPortSpeed	Enumerationr/w Enumerated Values: 1 auto 2 e1000M 3 e100M 4 e10M	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.4
iesMscPortDuplex	Enumerationr/w Enumerated Values: 1 full 2 half	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.5
iesMscPortFlowControl	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.6
iesMscPortDefaultVLANTagging	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.7
iesMscPortTrunkGroupId	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.8
iesMscPortMode The operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified.	Enumerationr/w Enumerated Values: 1 uplink 2 subtending	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.9
iesMscPortVLANTrunking The VLAN trunking setting for uplink and subtending ports in MSC.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.1.1.4.1.10

A table that contains rpm information about the fans.

iesFanRpmEntry row .1.3.6.1.4.1.890.1.5.13.1.2.1.1

A list of rpm information for each fan.

Indexes

iesChassisId iesFanRpmIndex

Column	Syntax	OID
iesFanRpmIndex The identity of the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.1
iesFanRpmCurValue The current rpm of the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.2
iesFanRpmMaxValue The maximum rpm ever performed by the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.3
iesFanRpmMinValue The minimum rpm ever performed by the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.4
iesFanRpmLowThresh The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.5
iesFanRpmDescr The description of the fan (e.g. location, function, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.2.1.1.6

A table that contains voltage information about the system.

iesVoltageEntry row .1.3.6.1.4.1.890.1.5.13.1.2.2.1

A list of voltage information for each sensor.

Indexes

iesChassisId iesSlotId iesVoltageIndex

Column	Syntax	OID
iesVoltageIndex The identity of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.1
iesVoltageCurValue The current voltage detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.2
iesVoltageMaxValue The maximum voltage ever detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.3
iesVoltageMinValue The minimum voltage ever detected by the sensor (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.4
iesVoltageNominalValue The nominal voltage which the power should supply (in milli-voltage).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.5
iesVoltageLowThresh The low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.6
iesVoltageDescr The description of the voltage (e.g. location, nominal value, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.2.2.1.7

A table that contains temperature information about system.

iesSysTempEntry row .1.3.6.1.4.1.890.1.5.13.1.2.3.1

A list of temperature information for each sensor.

Indexes

iesChassisId iesSlotId iesSysTempIndex

Column	Syntax	OID
iesSysTempIndex The identity of the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.1
iesSysTempCurValue The current temperature detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.2
iesSysTempMaxValue The maximum temperature ever detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.3
iesSysTempMinValue The minimum temperature ever detected in Celsius by the sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.4
iesSysTempHighThresh The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.5
iesSysTempDescr The description of the temperature sensor (e.g. location, function, etc.).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.2.3.1.6

A table that contains information about service access control.

iesAccessCtrlEntry row .1.3.6.1.4.1.890.1.5.13.1.3.4.1.1

A list of access control entry.

Indexes

iesAccessCtrlService

Column	Syntax	OID
iesAccessCtrlService The service type of the access control entry.	Enumeration Enumerated Values: 1 telnet 2 ftp 3 web 4 icmp	.1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.1
iesAccessCtrlEnable Enable or disable the service.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.2
iesAccessCtrlPort The port number which the service uses.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.3

A table that contains information about secured clients.

iesSecuredClientEntry row .1.3.6.1.4.1.890.1.5.13.1.3.4.3.1

A list of secured client entry.

Indexes

iesSecuredClientStartIp iesSecuredClientEndIp

Column	Syntax	OID
iesSecuredClientStartIp The starting IP address of a set of secured clients.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.1
iesSecuredClientEndIp The ending IP address of a set of secured clients.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.2
iesSecuredClientService Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: FTP BIT 3: web BIT 4: ICMP	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.3
iesSecuredClientRowStatus This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.4

A table that contains information about static routes.

iesStaticRouteEntry row .1.3.6.1.4.1.890.1.5.13.1.3.5.2.1

A list of static route entry.

Indexes

iesStaticRouteName

Column	Syntax	OID
iesStaticRouteName The name of the static route.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.1
iesStaticRouteDest The destination IP address of the static route.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.2
iesStaticRouteMask The subnet mask of the static route.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.3
iesStaticRouteGateway The gateway IP address of the static route.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.4
iesStaticRouteMetric The routing metric of the static route.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.5
iesStaticRouteRowStatus This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.6

A table that contains DHCP server information.

iesDhcpServerEntry row .1.3.6.1.4.1.890.1.5.13.1.3.7.5.1

The entry of DHCP server table.

Indexes

iesDhcpServerIp

Column	Syntax	OID
iesDhcpServerIp The IP address of the DHCP server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.7.5.1.1
iesDhcpServerRowStatus The row status of the DHCP server entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.7.5.1.2

A table that contains SNMP trap destination information.

iesSNMPTrapDestEntry row .1.3.6.1.4.1.890.1.5.13.1.3.8.2.1

The entry of SNMP trap destination table.

Indexes

iesTrapDestIp iesTrapDestPort

Column	Syntax	OID
iesTrapDestIp The IP address of the trap destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.1
iesTrapDestPort The UDP port of the trap destination.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.2
iesTrapDestRowStatus The row status of the trap destination entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.3

A table that contains Radius Server information.

iesRadiusServerEntry row .1.3.6.1.4.1.890.1.5.13.1.3.9.2.1

The entry of Radius Server table.

Indexes

iesRadiusServerIndex

Column	Syntax	OID
iesRadiusServerIndex The identity of the RADIUS server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.1
iesRadiusServerIp The IP address of the Radius Server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.2
iesRadiusServerPort The UDP port of the Radius Server.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.3
iesRadiusSharedSecret The shared secret of the Radius Server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.4
iesRadiusServerRowStatus The row status of the Radius Server entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.5

This table includes the configuration of 802.1x.

iesDot1xPortEntry row .1.3.6.1.4.1.890.1.5.13.1.3.9.4.1

An entry in iesDot1xPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
iesDot1xPortEnable The option defines if the port enables 802.1x settings.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.1
iesDot1xPortControl The configuration defines the 802.1x port control type.	Enumerationr/w Enumerated Values: 1 auto 2 forceAuth 3 forceUnAuth	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.2
iesDot1xPortReAuthEnable The option defines if the port enables 802.1x re-authentication.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.3
iesDot1xPortReAuthPeriod The configuration defines the 802.1x re-authentication period (seconds) for each port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.4
iesDot1xPortCircuitIdEnable The option defines if the port enables 802.1x circuit ID.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.5
iesDot1xPortCircuitIdInfo User specified information for circuit ID in 802.1x.	OctetStringr/w Constraints: range: 0-23	.1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.6

This table includes the status of mac filtering for each port.

iesMacFilterStatusEntry row .1.3.6.1.4.1.890.1.5.13.1.3.10.1.1

An entry in iesMacFilterStatusTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
iesMacFilterStatusEnable The option defines if the port enables mac filtering.	Enumerationr/w Enumerated Values: 1 enable-accept 2 disable 3 enable-deny	.1.3.6.1.4.1.890.1.5.13.1.3.10.1.1.1

A table that contains the mac filtering information.

iesMacFilterEntry row .1.3.6.1.4.1.890.1.5.13.1.3.10.5.1

The entry of iesMacFilterTable.

Indexes

RFC1213-MIBifIndex iesMacFilterMacAddr

Column	Syntax	OID
iesMacFilterMacAddr The mac address which can pass through the port.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.1.3.10.5.1.1
iesMacFilterRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.10.5.1.2

This table includes packet filtering for each port.

iesPacketFilterEntry row .1.3.6.1.4.1.890.1.5.13.1.3.11.1.1

An entry in iesPacketFilterTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
iesPacketFilter The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: re…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.11.1.1.1

This table includes mac count filtering for each port.

iesMacCountFilterEntry row .1.3.6.1.4.1.890.1.5.13.1.3.12.1.1

An entry in iesMacCountFilterTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
iesMacCountFilterStatus The option defines if the port enables mac count filtering.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.1.3.12.1.1.1
iesMacCountFilterCount The number of mac addresses which can pass through the port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.12.1.1.2

A table that contains static multicast group information.

iesMulticastGroupEntry row .1.3.6.1.4.1.890.1.5.13.1.3.13.2.1

The entry of multicast group table.

Indexes

iesMulticastGroupMacAddr

Column	Syntax	OID
iesMulticastGroupMacAddr The multicast MAC address of the group.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.1
iesMulticastGroupPorts The port list which specifies the ports joining the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.2
iesMulticastGroupRowStatus The row status of the multicast group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.3

A table that contains IGMP filters.

iesIgmpFilterEntry row .1.3.6.1.4.1.890.1.5.13.1.3.14.2.1

The entry of IGMP filter table.

Indexes

iesIgmpFilterName iesIgmpFilterIndex

Column	Syntax	OID
iesIgmpFilterName The IGMP filter name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.1
iesIgmpFilterIndex The index which specifies the filter rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.2
iesIgmpFilterStartIp The start IP of the filter rule.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.3
iesIgmpFilterEndIp The end IP of the filter rule.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.4
iesIgmpFilterRowStatus The row status of the IGMP filter entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.5

This table specifies the IGMP filter of the port.

iesIgmpFilterPortEntry row .1.3.6.1.4.1.890.1.5.13.1.3.14.3.1

An entry in iesIgmpFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
iesIgmpFilterPortFilter The IGMP filter of the port.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.1.3.14.3.1.1

A table that contains trunk group configuration.

iesTrunkGroupEntry row .1.3.6.1.4.1.890.1.5.13.1.4.5.1

The entry of trunk group table

Indexes

iesTrunkGroupId

Column	Syntax	OID
iesTrunkGroupId The ID of the trunk group	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.4.5.1.1
iesTrunkGroupName The name of the trunk group	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.13.1.4.5.1.2
iesTrunkGroupPorts The port list of the trunk group	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.1.4.5.1.3
iesTrunkGroupRowStatus The row status of the trunk group entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.1.4.5.1.4

A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame.

iesMacEntry row .1.3.6.1.4.1.890.1.5.13.1.5.1.2.1

An entry of iesMacTable.

Indexes

iesMacAddress

Column	Syntax	OID
iesMacAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.13.1.5.1.2.1.1
iesMacPort The port from which the mac address has been learned.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.1.5.1.2.1.2
iesMacStatus The status of this entry.	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.890.1.5.13.1.5.1.2.1.3