rateLimitPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.2.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::rateLimitPortTable'

Copy

rateLimitPortEntry row .1.3.6.1.4.1.890.1.5.8.56.2.2.1

An entry in rateLimitPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rateLimitPortIngRate Ingress peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.2.2.1.2
rateLimitPortEgrRate Egress peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.2.2.1.3
rateLimitPortIngState Ingress peak rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.2.2.1.5
rateLimitPortEgrState Egress peak rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.2.2.1.6

brLimitPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.3.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk brLimitPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::brLimitPortTable'

Copy

brLimitPortEntry row .1.3.6.1.4.1.890.1.5.8.56.3.2.1

An entry in brLimitPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
brLimitPortBrState Broadcast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.1
brLimitPortBrRate Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.2
brLimitPortMcState Multicast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.3
brLimitPortMcRate AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.4
brLimitPortDlfState Destination lookup failure frames rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.5
brLimitPortDlfRate Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.3.2.1.6

portSecurityPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.4.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portSecurityPortTable'

Copy

portSecurityPortEntry row .1.3.6.1.4.1.890.1.5.8.56.4.2.1

An entry in portSecurityPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portSecurityPortState Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSec…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.4.2.1.1
portSecurityPortLearnState MAC address learning enabled/disable on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.4.2.1.2
portSecurityPortCount Number of (dynamic) MAC addresses that may be learned on the port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.4.2.1.3

vlanTrunkPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.5.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::vlanTrunkPortTable'

Copy

vlanTrunkPortEntry row .1.3.6.1.4.1.890.1.5.8.56.5.1.1

An entry in vlanTrunkPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanTrunkPortState VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.5.1.1.1

portAuthTable

table

.1.3.6.1.4.1.890.1.5.8.56.8.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portAuthTable'

Copy

portAuthEntry row .1.3.6.1.4.1.890.1.5.8.56.8.2.1

An entry in portAuthTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portAuthEntryState 802.1x port authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.1
portReAuthEntryState 802.1x port re-authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.2
portReAuthEntryTimer Re-authentication timer in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.3
portAuthQuietPeriod Quiet period in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.4
portAuthTxPeriod Tx period in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.5
portAuthSupplicantTimeout Supplicant Timeout in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.6
portAuthMaxRequest Max request.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.7
portAuthGuestVlanState Guest Vlan State.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.8
portAuthGuestVlan Guest Vlan ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.9
portAuthGuestVlanHostMode Guest Vlan Host Mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.10
portAuthGuestVlanHostModeMultiSecureNumber Guest Vlan Host Mode Multi-Secure number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.8.2.1.11

fanRpmTable

table

.1.3.6.1.4.1.890.1.5.8.56.9.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanRpmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::fanRpmTable'

Copy

fanRpmEntry row .1.3.6.1.4.1.890.1.5.8.56.9.1.1

An entry in fanRpmTable.

Indexes

fanRpmIndex

Column	Syntax	OID
fanRpmIndex Index of FAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.1
fanRpmCurValue Current speed in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.2
fanRpmMaxValue Maximum speed measured in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.3
fanRpmMinValue Minimum speed measured in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.4
fanRpmLowThresh The minimum speed at which a normal fan should work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.5
fanRpmDescr 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.9.1.1.6

tempTable

table

.1.3.6.1.4.1.890.1.5.8.56.9.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tempTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::tempTable'

Copy

tempEntry row .1.3.6.1.4.1.890.1.5.8.56.9.2.1

An entry in tempTable.

Indexes

tempIndex

Column	Syntax	OID
tempIndex Index of temperature unit. 1:MAC, 2:CPU, 3:PHY	Enumeration Enumerated Values: 1 mac 2 cpu 3 phy	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.1
tempCurValue The current temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.2
tempMaxValue The maximum temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.3
tempMinValue The minimum temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.4
tempHighThresh The upper temperature limit at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.5
tempDescr 'Normal' indicates temperatures below the threshold and 'Error' for those above.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.9.2.1.6

voltageTable

table

.1.3.6.1.4.1.890.1.5.8.56.9.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::voltageTable'

Copy

voltageEntry row .1.3.6.1.4.1.890.1.5.8.56.9.3.1

An entry in voltageTable.

Indexes

voltageIndex

Column	Syntax	OID
voltageIndex Index of voltage.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.1
voltageCurValue The current voltage reading.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.2
voltageMaxValue The maximum voltage measured at this point.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.3
voltageMinValue The minimum voltage measured at this point.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.4
voltageNominalValue The normal voltage at wchich the switch work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.5
voltageLowThresh The minimum voltage at which the switch should work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.6
voltageDescr 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.9.3.1.7

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.8.56.10.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::snmpTrapDestTable'

Copy

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.8.56.10.4.1

An entry in snmpTrapDestTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapDestIP IP address of trap destination.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.10.4.1.1
snmpTrapDestRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.10.4.1.2
snmpTrapDestPort The UDP port of the trap destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.10.4.1.3
snmpTrapVersion The SNMP protocol version to send traps.	Enumerationr/w Enumerated Values: 0 v1 1 v2c 2 v3	.1.3.6.1.4.1.890.1.5.8.56.10.4.1.4
snmpTrapUserName The user name for sending SNMPv3 traps.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.10.4.1.5

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.8.56.10.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::snmpUserTable'

Copy

A table that contains SNMPv3 user information.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.8.56.10.6.1

An entry of snmpUserTable.

Indexes

snmpUserName

Column	Syntax	OID
snmpUserName The user name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.10.6.1.1
snmpUserSecurityLevel The level of security at which SNMP messages can be sent or with which operations are being processed.	Enumerationr/w Enumerated Values: 0 noAuthNoPriv 1 authNoPriv 2 authPriv	.1.3.6.1.4.1.890.1.5.8.56.10.6.1.2
snmpUserAuthProtocol The type of authentication protocol to be used.	Enumerationr/w Enumerated Values: 0 md5 1 sha	.1.3.6.1.4.1.890.1.5.8.56.10.6.1.3
snmpUserPrivProtocol The type of privacy protocol to be used.	Enumerationr/w Enumerated Values: 0 des 1 aes	.1.3.6.1.4.1.890.1.5.8.56.10.6.1.4
snmpUserGroup The group name which this user belongs to.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.10.6.1.5

snmpTrapGroupTable

table

.1.3.6.1.4.1.890.1.5.8.56.10.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::snmpTrapGroupTable'

Copy

snmpTrapGroupEntry row .1.3.6.1.4.1.890.1.5.8.56.10.7.1

An entry in snmpTrapGroupTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapSystemGroup	Bitsr/w Enumerated Values: 0 coldStart 1 warmStart 2 fanSpeed 3 temperature 4 voltage 5 reset 6 timeSync 7 intrusionlock 13 loopGuard 14 errdisable 16 poe	.1.3.6.1.4.1.890.1.5.8.56.10.7.1.1
snmpTrapInterfaceGroup	Bitsr/w Enumerated Values: 0 linkup 1 linkdown 3 lldp 4 transceiver-ddm	.1.3.6.1.4.1.890.1.5.8.56.10.7.1.2
snmpTrapAAAGroup	Bitsr/w Enumerated Values: 0 authentication 1 accounting	.1.3.6.1.4.1.890.1.5.8.56.10.7.1.3
snmpTrapIPGroup	Bitsr/w Enumerated Values: 0 ping 1 traceroute	.1.3.6.1.4.1.890.1.5.8.56.10.7.1.4
snmpTrapSwitchGroup	Bitsr/w Enumerated Values: 0 stp 1 mactable 2 rmon 3 cfm	.1.3.6.1.4.1.890.1.5.8.56.10.7.1.5

igmpsnpVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.13.13 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpsnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpsnpVlanTable'

Copy

igmpsnpVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.13.13.1

An entry in IgmpsnpVlanTable.

Indexes

igmpsnpVid

Column	Syntax	OID
igmpsnpVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.13.13.1.1
igmpsnpVlanName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.13.13.1.2
igmpsnpVlanRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.13.13.1.3

inbandIpTable

table

.1.3.6.1.4.1.890.1.5.8.56.14.5 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::inbandIpTable'

Copy

inbandIpEntry row .1.3.6.1.4.1.890.1.5.8.56.14.5.1

An entry in inbandIpTable.

Indexes

inbandEntryIp inbandEntryVid

Column	Syntax	OID
inbandEntryIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.1
inbandEntrySubnetMask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.2
inbandEntryGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.3
inbandEntryVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.4
inbandEntryManageable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.5
inbandEntryRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.14.5.1.6

filterTable

table

.1.3.6.1.4.1.890.1.5.8.56.15.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk filterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::filterTable'

Copy

filterEntry row .1.3.6.1.4.1.890.1.5.8.56.15.1.1

An entry in filterTable.

Indexes

filterMacAddr filterVid

Column	Syntax	OID
filterName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.15.1.1.1
filterActionState	Enumerationr/w Enumerated Values: 1 discard-source 2 discard-destination 3 both	.1.3.6.1.4.1.890.1.5.8.56.15.1.1.2
filterMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.15.1.1.3
filterVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.15.1.1.4
filterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.15.1.1.5

mirrorTable

table

.1.3.6.1.4.1.890.1.5.8.56.16.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mirrorTable'

Copy

mirrorEntry row .1.3.6.1.4.1.890.1.5.8.56.16.3.1

An entry in mirrorTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mirrorMirroredState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.16.3.1.1
mirrorDirection	Enumerationr/w Enumerated Values: 0 ingress 1 egress 2 both	.1.3.6.1.4.1.890.1.5.8.56.16.3.1.2

aggrGroupTable

table

.1.3.6.1.4.1.890.1.5.8.56.17.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::aggrGroupTable'

Copy

aggrGroupEntry row .1.3.6.1.4.1.890.1.5.8.56.17.3.1

An entry in aggrGroupTable.

Indexes

aggrGroupIndex

Column	Syntax	OID
aggrGroupIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.17.3.1.1
aggrGroupState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.17.3.1.2
aggrGroupDynamicState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.17.3.1.3
aggrGroupCriteria	Enumerationr/w Enumerated Values: 1 src-mac 2 dst-mac 3 src-dst-mac 4 src-ip 5 dst-ip 6 src-dst-ip	.1.3.6.1.4.1.890.1.5.8.56.17.3.1.4

aggrPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.17.4 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::aggrPortTable'

Copy

aggrPortEntry row .1.3.6.1.4.1.890.1.5.8.56.17.4.1

An entry in aggrPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
aggrPortGroup	Enumerationr/w Enumerated Values: 0 none 1 t1 2 t2 3 t3 4 t4 5 t5 6 t6 7 t7 8 t8	.1.3.6.1.4.1.890.1.5.8.56.17.4.1.1
aggrPortDynamicStateTimeout	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.17.4.1.2

accessCtlTable

table

.1.3.6.1.4.1.890.1.5.8.56.18.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accessCtlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::accessCtlTable'

Copy

accessCtlEntry row .1.3.6.1.4.1.890.1.5.8.56.18.1.1

An entry in accessCtlTable.

Indexes

accessCtlService

Column	Syntax	OID
accessCtlService	Enumeration Enumerated Values: 1 telnet 2 ssh 3 ftp 4 http 5 https 6 icmp 7 snmp	.1.3.6.1.4.1.890.1.5.8.56.18.1.1.1
accessCtlEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.18.1.1.2
accessCtlServicePort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.18.1.1.3
accessCtlTimeout	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.18.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.8.56.18.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::securedClientTable'

Copy

securedClientEntry row .1.3.6.1.4.1.890.1.5.8.56.18.2.1

An entry in securedClientTable.

Indexes

securedClientIndex

Column	Syntax	OID
securedClientIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.18.2.1.1
securedClientEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.18.2.1.2
securedClientStartIp	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.18.2.1.3
securedClientEndIp	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.18.2.1.4
securedClientService	Bitsr/w Enumerated Values: 0 telnet 1 ftp 2 http 3 icmp 4 snmp 5 ssh 6 https	.1.3.6.1.4.1.890.1.5.8.56.18.2.1.5

portQueuingMethodTable

table

.1.3.6.1.4.1.890.1.5.8.56.19.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portQueuingMethodTable'

Copy

portQueuingMethodEntry row .1.3.6.1.4.1.890.1.5.8.56.19.1.1

An entry in portQueuingMethodTable.

Indexes

BRIDGE-MIBdot1dBasePort portQueuingMethodQueue

Column	Syntax	OID
portQueuingMethodQueue 0...7	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.19.1.1.1
portQueuingMethodWeight 0...15	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.19.1.1.2
portQueuingMethodMode	Enumerationr/w Enumerated Values: 0 strictly-priority 1 weighted-fair-scheduling 2 weighted-round-robin	.1.3.6.1.4.1.890.1.5.8.56.19.1.1.3

portQueuingMethodHybridSpqTable

table

.1.3.6.1.4.1.890.1.5.8.56.19.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodHybridSpqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portQueuingMethodHybridSpqTable'

Copy

portQueuingMethodHybridSpqEntry row .1.3.6.1.4.1.890.1.5.8.56.19.2.1

An entry in portQueuingMethodTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portQueuingMethodHybridSpq	Enumerationr/w Enumerated Values: 0 none 1 q0 2 q1 3 q2 4 q3 5 q4 6 q5 7 q6 8 q7	.1.3.6.1.4.1.890.1.5.8.56.19.2.1.1

globalDhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.20.1.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk globalDhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::globalDhcpRelayRemoteServerTable'

Copy

globalDhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.8.56.20.1.6.1

An entry in globalDhcpRelayRemoteServerTable.

Indexes

globalDhcpRelayRemoteServerIp

Column	Syntax	OID
globalDhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.20.1.6.1.1
globalDhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.20.1.6.1.2

dhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.20.2.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::dhcpRelayRemoteServerTable'

Copy

dhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.8.56.20.2.4.1

An entry in dhcpRelayRemoteServerTable.

Indexes

dhcpRelayVid dhcpRelayRemoteServerIp

Column	Syntax	OID
dhcpRelayVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.20.2.4.1.1
dhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.20.2.4.1.2
dhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.20.2.4.1.3

dhcpRelayTable

table

.1.3.6.1.4.1.890.1.5.8.56.20.2.5 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::dhcpRelayTable'

Copy

dhcpRelayEntry row .1.3.6.1.4.1.890.1.5.8.56.20.2.5.1

An entry in dhcpRelayTable.

Indexes

dhcpRelayVid

Column	Syntax	OID
dhcpRelayOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.20.2.5.1.1
dhcpRelayInfoEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.20.2.5.1.2

staticRouteTable

table

.1.3.6.1.4.1.890.1.5.8.56.21.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::staticRouteTable'

Copy

staticRouteEntry row .1.3.6.1.4.1.890.1.5.8.56.21.2.1

An entry in staticRouteTable.

Indexes

staticRouteIp staticRouteMask

Column	Syntax	OID
staticRouteName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.1
staticRouteIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.2
staticRouteMask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.3
staticRouteGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.4
staticRouteMetric	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.5
staticRouteRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.21.2.1.6

arpTable

table

.1.3.6.1.4.1.890.1.5.8.56.22.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpTable'

Copy

arpEntry row .1.3.6.1.4.1.890.1.5.8.56.22.1.1

An entry in arpTable.

Indexes

arpIpAddr arpMacVid

Column	Syntax	OID
arpIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.22.1.1.1
arpIpAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.22.1.1.2
arpMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.22.1.1.3
arpMacVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.22.1.1.4
arpType 1-static, 2-dynamic	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.890.1.5.8.56.22.1.1.5

portOpModePortTable

table

.1.3.6.1.4.1.890.1.5.8.56.24.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portOpModePortTable'

Copy

portOpModePortEntry row .1.3.6.1.4.1.890.1.5.8.56.24.1.1

An entry in portOpModePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortSpeedDuplex	Enumerationr/w Enumerated Values: 0 auto 1 speed-10-half 2 speed-10-full 3 speed-100-half 4 speed-100-full 5 speed-1000-full	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.1
portOpModePortFlowCntl	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.2
portOpModePortName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.3
portOpModePortModuleType	Enumeration Enumerated Values: 0 fast-ethernet-10-100 1 gigabit-ethernet-100-1000	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.4
portOpModePortLinkUpType	Enumeration Enumerated Values: 0 down 1 copper 2 fiber	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.5
portOpModePortIntrusionLock	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.6
portOpModePortLBTestStatus This entry display latest loopback test status of port while performing loopback test.	Enumeration Enumerated Values: 0 none 1 under-testing 2 success 3 fail	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.7
portOpModePortCounterReset This entry resets port counter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.8.56.24.1.1.8

portBasedVlanPortListTable

table

.1.3.6.1.4.1.890.1.5.8.56.25.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedVlanPortListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portBasedVlanPortListTable'

Copy

portBasedVlanPortListEntry row .1.3.6.1.4.1.890.1.5.8.56.25.1.1

An entry in portBasedVlanPortListTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portBasedVlanPortListMembers	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.8.56.25.1.1.1

eventTable

table

.1.3.6.1.4.1.890.1.5.8.56.26.1.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::eventTable'

Copy

A list of currently active fault events. All faults 
of normal type regardless of their severity level 
are recorded in the event table. When a normal 
type fault is cleared it is deleted from the event 
table.

eventEntry row .1.3.6.1.4.1.890.1.5.8.56.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column	Syntax	OID
eventSeqNum This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is increm…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.1
eventEventId This variable represents the event ID which uniquely identifies the event in the entire system.	EventIdNumber	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.2
eventName This variable represents the name of the event, for example 'Ethernet Link Down'	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.3
eventInstanceType This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For…	InstanceType Type Values: 1 unknown 2 node 3 shelf 4 line 5 switch 6 lsp 7 l2Interface 8 l3Interface 9 rowIndex	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.4
eventInstanceId This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more …	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.5
eventInstanceName This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstance…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.6
eventSeverity This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention t…	EventSeverity Type Values: 1 critical 2 major 3 minor 4 informational	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.7
eventSetTime This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.	UtcTimeStamp	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.8
eventDescription This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no us…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.9
eventServAffective This variable indicates whether the event is service affective or not	EventServiceAffective Type Values: 1 noServiceAffected 2 serviceAffected	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.10
eventInstanceIdNumber This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.26.1.1.1.11

multicastPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.28.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::multicastPortTable'

Copy

multicastPortEntry row .1.3.6.1.4.1.890.1.5.8.56.28.1.1

An entry in multicastPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
multicastPortMaxGroupLimited	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.2
multicastPortMaxOfGroup 0..255	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.3
multicastPortIgmpFilteringProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.4
multicastPortQuerierMode	Enumerationr/w Enumerated Values: 1 auto 2 fixed 3 edge	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.5
multicastPortThrottlingAction Specify throttling action for each port	Enumerationr/w Enumerated Values: 1 deny 2 replace	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.6
multicastPortLeaveMode	Enumerationr/w Enumerated Values: 0 normal 1 immediate 2 fast	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.7
multicastPortLeaveTimeout 200..6348800	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.8
multicastPortFastLeaveTimeout 200..6348800	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.28.1.1.9

multicastStatusTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::multicastStatusTable'

Copy

multicastStatusEntry row .1.3.6.1.4.1.890.1.5.8.56.29.1.1

An entry in multicastStatusTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup

Column	Syntax	OID
multicastStatusIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.1.1.1
multicastStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.1.1.2
multicastStatusPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.1.1.3
multicastStatusGroup	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.29.1.1.4

igmpSnpCountTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.2 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpSnpCountTable'

Copy

A count table of igmp query/report/leave message.

igmpSnpCountEntry row .1.3.6.1.4.1.890.1.5.8.56.29.2.1

An entry in igmpSnpCountTable.

Indexes

igmpSnpCountIndex

Column	Syntax	OID
igmpSnpCountIndex Index of IgmpCountEntry. 0 means total count in whole system	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.1
igmpSnpV2CountQueryRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.2
igmpSnpV2CountReportRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.3
igmpSnpV2CountLeaveRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.4
igmpSnpV2CountQueryRxDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.5
igmpSnpV2CountReportRxDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.6
igmpSnpV2CountLeaveRxDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.7
igmpSnpV2CountQueryTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.8
igmpSnpV2CountReportTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.9
igmpSnpV2CountLeaveTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.10
igmpSnpV3CountQueryRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.11
igmpSnpV3CountReportRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.12
igmpSnpV3CountQueryRxDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.13
igmpSnpV3CountReportRxDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.14
igmpSnpV3CountQueryTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.15
igmpSnpV3CountReportTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.2.1.16

multicastVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::multicastVlanStatusTable'

Copy

multicastVlanStatusEntry row .1.3.6.1.4.1.890.1.5.8.56.29.3.1

An entry in multicastVlanStatusTable.

Indexes

multicastVlanStatusVlanID

Column	Syntax	OID
multicastVlanStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.3.1.1
multicastVlanStatusType	Enumeration Enumerated Values: 1 dynamic 2 mvr 3 static	.1.3.6.1.4.1.890.1.5.8.56.29.3.1.2
multicastVlanQueryPort	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.8.56.29.3.1.3

igmpSnpCountVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.4 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpCountVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpSnpCountVlanTable'

Copy

igmpSnpCountVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.29.4.1

An entry in igmpGroupVlanStatus.

Indexes

igmpSnpCountVlanIndex

Column	Syntax	OID
igmpSnpCountVlanIndex Input vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.1
igmpSnpV2CountVlanQueryRx show igmpsnp Query Rx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.2
igmpSnpV2CountVlanReportRx show igmpsnp Report Rx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.3
igmpSnpV2CountVlanLeaveRx show igmpsnp Leave Rx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.4
igmpSnpV2CountVlanQueryRxDrop show igmpsnp Query Rx Error counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.5
igmpSnpV2CountVlanReportRxDrop show igmpsnp Report Rx Error counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.6
igmpSnpV2CountVlanLeaveRxDrop show igmpsnp Leave Rx Error counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.7
igmpSnpV2CountVlanQueryTx show igmpsnp Query Tx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.8
igmpSnpV2CountVlanReportTx show igmpsnp Report Tx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.9
igmpSnpV2CountVlanLeaveTx show igmpsnp Leave Tx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.10
igmpSnpV3CountVlanQueryRx show igmpsnp Query Rx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.11
igmpSnpV3CountVlanReportRx show igmpsnp Report Rx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.12
igmpSnpV3CountVlanQueryRxDrop show igmpsnp Query Rx Error counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.13
igmpSnpV3CountVlanReportRxDrop show igmpsnp Report Rx Error counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.14
igmpSnpV3CountVlanQueryTx show igmpsnp Query Tx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.15
igmpSnpV3CountVlanReportTx show igmpsnp Report Tx counters for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.4.1.16

igmpSnpCountPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.5 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpCountPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpSnpCountPortTable'

Copy

igmpSnpCountPortEntry row .1.3.6.1.4.1.890.1.5.8.56.29.5.1

An entry in igmpSnpCountPortStatus.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
igmpSnpV2CountPortQueryRx show igmpsnp Query Rx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.1
igmpSnpV2CountPortReportRx show igmpsnp Report Rx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.2
igmpSnpV2CountPortLeaveRx show igmpsnp Leave Rx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.3
igmpSnpV2CountPortReportRxDrop show igmpsnp Report Rx Error counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.4
igmpSnpV2CountPortLeaveRxDrop show igmpsnp Leave Rx Error counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.5
igmpSnpV2CountPortReportTx show igmpsnp Report Tx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.6
igmpSnpV2CountPortLeaveTx show igmpsnp Leave Tx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.7
igmpSnpV3CountPortQueryRx show igmpsnp Query Rx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.8
igmpSnpV3CountPortReportRx show igmpsnp Report Rx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.9
igmpSnpV3CountPortReportRxDrop show igmpsnp Report Rx Error counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.10
igmpSnpV3CountPortReportTx show igmpsnp Report Tx counters for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.5.1.11

igmpSnpGroupCountVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.6.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpGroupCountVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpSnpGroupCountVlanTable'

Copy

igmpSnpGroupCountVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.29.6.2.1

An entry in igmpSnpGroupVlanStatus.

Indexes

igmpSnpGroupCountVlanIndex

Column	Syntax	OID
igmpSnpGroupCountVlanIndex Show IGMP snooping group index for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.6.2.1.1
igmpSnpGroupCountVlanNum Show IGMP snooping group number for vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.6.2.1.2

igmpSnpGroupCountPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.29.6.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpSnpGroupCountPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpSnpGroupCountPortTable'

Copy

igmpSnpGroupCountPortEntry row .1.3.6.1.4.1.890.1.5.8.56.29.6.3.1

An entry in igmpGroupCountPortStatus.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
igmpSnpGroupCountPortNum Show IGMP snooping group number for port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.29.6.3.1.1

igmpFilteringProfileTable

table

.1.3.6.1.4.1.890.1.5.8.56.30.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpFilteringProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::igmpFilteringProfileTable'

Copy

igmpFilteringProfileEntry row .1.3.6.1.4.1.890.1.5.8.56.30.2.1

An entry in igmpFilteringProfileTable.

Indexes

igmpFilteringProfileName igmpFilteringProfileStartAddress igmpFilteringProfileEndAddress

Column	Syntax	OID
igmpFilteringProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.30.2.1.1
igmpFilteringProfileStartAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.30.2.1.2
igmpFilteringProfileEndAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.30.2.1.3
igmpFilteringProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.30.2.1.4

mvrTable

table

.1.3.6.1.4.1.890.1.5.8.56.31.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mvrTable'

Copy

mvrEntry row .1.3.6.1.4.1.890.1.5.8.56.31.2.1

An entry in mvrTable.

Indexes

mvrVlanID

Column	Syntax	OID
mvrVlanID 1..4094	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.31.2.1.1
mvrName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.31.2.1.2
mvrMode	Enumerationr/w Enumerated Values: 0 dynamic 1 compatible	.1.3.6.1.4.1.890.1.5.8.56.31.2.1.3
mvrRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.31.2.1.4
mvr8021pPriority Set the 802.1p priority of control messages within MVR (0~7)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.31.2.1.5

mvrPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.31.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mvrPortTable'

Copy

mvrPortEntry row .1.3.6.1.4.1.890.1.5.8.56.31.3.1

An entry in mvrPortTable.

Indexes

mvrVlanID BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mvrPortRole	Enumerationr/w Enumerated Values: 1 none 2 source-port 3 receiver-port	.1.3.6.1.4.1.890.1.5.8.56.31.3.1.1
mvrPortTagging	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.31.3.1.2

mvrGroupTable

table

.1.3.6.1.4.1.890.1.5.8.56.31.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mvrGroupTable'

Copy

mvrGroupEntry row .1.3.6.1.4.1.890.1.5.8.56.31.5.1

An entry in mvrGroupTable.

Indexes

mvrVlanID mvrGroupName

Column	Syntax	OID
mvrGroupName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.31.5.1.1
mvrGroupStartAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.31.5.1.2
mvrGroupEndAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.31.5.1.3
mvrGroupRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.31.5.1.4

clusterManagerTable

table

.1.3.6.1.4.1.890.1.5.8.56.32.1.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterManagerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::clusterManagerTable'

Copy

clusterManagerEntry row .1.3.6.1.4.1.890.1.5.8.56.32.1.2.1

An entry in clusterManagerTable.

Indexes

clusterManagerVid

Column	Syntax	OID
clusterManagerVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.32.1.2.1.1
clusterManagerName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.32.1.2.1.2
clusterManagerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.32.1.2.1.3

clusterMemberTable

table

.1.3.6.1.4.1.890.1.5.8.56.32.2.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::clusterMemberTable'

Copy

clusterMemberEntry row .1.3.6.1.4.1.890.1.5.8.56.32.2.2.1

An entry in clusterMemberTable.

Indexes

clusterMemberMac

Column	Syntax	OID
clusterMemberMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.32.2.2.1.1
clusterMemberName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.2.2.1.2
clusterMemberModel	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.2.2.1.3
clusterMemberPassword	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.32.2.2.1.4
clusterMemberRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.32.2.2.1.5

clusterCandidateTable

table

.1.3.6.1.4.1.890.1.5.8.56.32.3.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterCandidateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::clusterCandidateTable'

Copy

clusterCandidateEntry row .1.3.6.1.4.1.890.1.5.8.56.32.3.1.1

An entry in clusterCandidateTable.

Indexes

clusterCandidateMac

Column	Syntax	OID
clusterCandidateMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.32.3.1.1.1
clusterCandidateName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.3.1.1.2
clusterCandidateModel	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.3.1.1.3

clusterStatusMemberTable

table

.1.3.6.1.4.1.890.1.5.8.56.32.4.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk clusterStatusMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::clusterStatusMemberTable'

Copy

clusterStatusMemberEntry row .1.3.6.1.4.1.890.1.5.8.56.32.4.4.1

An entry in clusterStatusMemberTable.

Indexes

clusterStatusMemberMac

Column	Syntax	OID
clusterStatusMemberMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.32.4.4.1.1
clusterStatusMemberName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.4.4.1.2
clusterStatusMemberModel	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.32.4.4.1.3
clusterStatusMemberStatus	Enumeration Enumerated Values: 0 error 1 online 2 offline	.1.3.6.1.4.1.890.1.5.8.56.32.4.4.1.4

sysLogTypeTable

table

.1.3.6.1.4.1.890.1.5.8.56.33.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::sysLogTypeTable'

Copy

sysLogTypeEntry row .1.3.6.1.4.1.890.1.5.8.56.33.2.1

An entry in sysLogTypeTable.

Indexes

sysLogTypeIndex

Column	Syntax	OID
sysLogTypeIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.33.2.1.1
sysLogTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.33.2.1.2
sysLogTypeState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.33.2.1.3
sysLogTypeFacility	Enumerationr/w Enumerated Values: 0 local-user0 1 local-user1 2 local-user2 3 local-user3 4 local-user4 5 local-user5 6 local-user6 7 local-user7	.1.3.6.1.4.1.890.1.5.8.56.33.2.1.4

sysLogServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.33.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::sysLogServerTable'

Copy

sysLogServerEntry row .1.3.6.1.4.1.890.1.5.8.56.33.3.1

An entry in sysLogServerTable.

Indexes

sysLogServerAddress

Column	Syntax	OID
sysLogServerAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.33.3.1.1
sysLogServerLogLevel	Enumerationr/w Enumerated Values: 0 level0 1 level0-1 2 level0-2 3 level0-3 4 level0-4 5 level0-5 6 level0-6 7 level0-7	.1.3.6.1.4.1.890.1.5.8.56.33.3.1.2
sysLogServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.33.3.1.3

diffservMapTable

table

.1.3.6.1.4.1.890.1.5.8.56.34.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::diffservMapTable'

Copy

diffservMapEntry row .1.3.6.1.4.1.890.1.5.8.56.34.2.1

An entry in diffservMapTable.

Indexes

diffservMapDscp

Column	Syntax	OID
diffservMapDscp 0-63	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.34.2.1.1
diffservMapPriority 0-7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.34.2.1.2

protoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.35.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk protoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::protoBasedVlanTable'

Copy

protoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.35.1.1

An entry in protoBasedVlanTable.

Indexes

protoBasedVlanPort protoBasedVlanPacketType protoBasedVlanEtherType

Column	Syntax	OID
protoBasedVlanPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.1
protoBasedVlanPacketType	Enumeration Enumerated Values: 1 etherII 2 snap 3 llc	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.2
protoBasedVlanEtherType	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.3
protoBasedVlanName	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.4
protoBasedVlanVid	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.5
protoBasedVlanPriority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.6
protoBasedVlanState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.35.1.1.7

mrstpBridgeTable

table

.1.3.6.1.4.1.890.1.5.8.56.36.1.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mrstpBridgeTable'

Copy

mrstpBridgeEntry row .1.3.6.1.4.1.890.1.5.8.56.36.1.1.1

An entry in mrstpBridgeTable.

Indexes

mrstpBridgeIndex

Column	Syntax	OID
mrstpBridgeIndex The tree index of the MRSTP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.1
mrstpState Enabled/disabled on the mrstp bridge.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.2
mrstpProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.3
mrstpPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.4
mrstpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.5
mrstpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.6
mrstpDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.7
mrstpRootCost The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.8
mrstpRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.9
mrstpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.10
mrstpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.11
mrstpHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.12
mrstpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.13
mrstpBridgeMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of th…	Integer32r/w Constraints: range: 600-4000	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.14
mrstpBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	Integer32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.15
mrstpBridgeForwardDelay The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity o…	Integer32r/w Constraints: range: 400-3000	.1.3.6.1.4.1.890.1.5.8.56.36.1.1.1.16

mrstpPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.36.1.2 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mrstpPortTable'

Copy

A table that contains port-specific information
for the Spanning Tree Protocol.

mrstpPortEntry row .1.3.6.1.4.1.890.1.5.8.56.36.1.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

mrstpPort

Column	Syntax	OID
mrstpPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.1
mrstpPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.2
mrstpPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.3
mrstpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.4
mrstpPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.5
mrstpPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.6
mrstpPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.7
mrstpPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.8
mrstpPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.9
mrstpPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.10
mrstpPortOnBridgeIndex Indetify the bridge index that this port joined to in MRSTP.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.11
mrstpPortAdminEdgePort The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.12
mrstpPortOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the corresponding instance of dot1dStpPortAdminEdgePort is set,…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.8.56.36.1.2.1.13

classifierRuleTable

table

.1.3.6.1.4.1.890.1.5.8.56.37.1 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk classifierRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::classifierRuleTable'

Copy

classifierRuleEntry row .1.3.6.1.4.1.890.1.5.8.56.37.1.1

An entry in classifierRuleTable.

Indexes

classifierName

Column	Syntax	OID
classifierName Name of classifier rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.1
classifierEnable Classifier rule enabled/disabled.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.2
classifierEtherType Ether type for classifier rule, in decimal expression. Value 65535 means any	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.6
classifierSrcMAC Source mac address for classifier rule. 00:00:00:00:00:00 means any	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.7
classifierIncomingPort Incoming Port for classifier rule. Value 65536 means any	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.8
classifierDstMAC Destination mac address for classifier rule. 00:00:00:00:00:00 means any	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.9
classifierIpProtocol IP Protocol for classifier rule. Value 255 means any	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.11
classifierEstablishOnly IP Protocol for EstablishOnly in classifier rule	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.12
classifierSrcIp Source IP address for classifier rule. 0.0.0.0 means any	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.13
classifierSrcIpMask Source IP Mask for classifier rule.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.14
classifierSrcSocket Source Socket Number for classifier rule. Value 0 means any	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.15
classifierDstIp Destination IP address for classifier rule. 0.0.0.0 means any	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.16
classifierDstIpMask Destination IP Mask for classifier rule	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.17
classifierDstSocket Destination Socket Number for classifier rule. Value 0 means any	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.18
classifierRowstatus Row Status for classifier rule	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.37.1.1.19

policyTable

table

.1.3.6.1.4.1.890.1.5.8.56.38.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk policyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::policyTable'

Copy

policyEntry row .1.3.6.1.4.1.890.1.5.8.56.38.1.1

An entry in policyTable.

Indexes

policyName

Column	Syntax	OID
policyName Name of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.1
policyEnable Policy rule enabled/disabled.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.2
policyClassifier Classifier of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.3
policyVlanId Vlan id for policy rule	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.4
policyEgressPort Egress Port for policy rule	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.5
policy8021pPriority 802.1p priority for policy rule, 0~7.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.7
policyBandwidth Bandwidth for policy rule	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.10
policyForwardingAction Forwarding Action for policy rule	Enumeration Enumerated Values: 1 no-change 2 discard-the-packet	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.12
policyPriorityAction Priority Action for policy rule	Enumeration Enumerated Values: 1 no-change 2 set-the-packets-802-1-priority	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.13
policyOutgoingAction Outgoing Action for policy rule. Started bit is from MSB bit7 (bit7~bit0).	Bitsr/w Enumerated Values: 1 send-the-packet-to-the-egress-port 3 set-the-packets-VLAN-ID	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.15
policyRateLimitEnable Metering for Policy rule enabled/disabled.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.16
policyRowstatus Row Status for policy rule	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.38.1.1.18

dhcpSnpVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.100.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::dhcpSnpVlanTable'

Copy

dhcpSnpVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.100.1.1

Indexes

dhcpSnpVlanEntryVid

Column	Syntax	OID
dhcpSnpVlanEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.100.1.1.1
dhcpSnpVlanEntryEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.100.1.1.2
dhcpSnpVlanEntryOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.100.1.1.3
dhcpSnpVlanEntryInfo	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.100.1.1.4

dhcpSnpPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.100.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::dhcpSnpPortTable'

Copy

dhcpSnpPortEntry row .1.3.6.1.4.1.890.1.5.8.56.100.2.1

Indexes

dhcpSnpPortEntryPort

Column	Syntax	OID
dhcpSnpPortEntryPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.100.2.1.1
dhcpSnpPortEntryTrust	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.100.2.1.2
dhcpSnpPortEntryRate 0 means unlimited	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.8.56.100.2.1.3

dhcpSnpBindTable

table

.1.3.6.1.4.1.890.1.5.8.56.100.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::dhcpSnpBindTable'

Copy

dhcpSnpBindEntry row .1.3.6.1.4.1.890.1.5.8.56.100.3.1

Indexes

dhcpSnpBindEntryMac dhcpSnpBindEntryVid

Column	Syntax	OID
dhcpSnpBindEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.1
dhcpSnpBindEntryVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.2
dhcpSnpBindEntryIP	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.3
dhcpSnpBindEntryLease	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.4
dhcpSnpBindEntryType	Enumeration Enumerated Values: 2 dynamic	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.5
dhcpSnpBindEntryPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.100.3.1.6

ipsgTable

table

.1.3.6.1.4.1.890.1.5.8.56.101.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipsgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::ipsgTable'

Copy

ipsgEntry row .1.3.6.1.4.1.890.1.5.8.56.101.1.1

Indexes

ipsgEntryMac ipsgEntryVid

Column	Syntax	OID
ipsgEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.1
ipsgEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.2
ipsgEntryIp	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.3
ipsgEntryLease second	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.4
ipsgEntryType	Enumeration Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.5
ipsgEntryPort 0 means any port	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.6
ipsgEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.101.1.1.7

arpInspectVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.102.1.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpInspectVlanTable'

Copy

arpInspectVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.102.1.4.1

Indexes

arpInspectVlanVid

Column	Syntax	OID
arpInspectVlanVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.102.1.4.1.1
arpInspectVlanLog	Enumerationr/w Enumerated Values: 1 all 2 none 3 permit 4 deny	.1.3.6.1.4.1.890.1.5.8.56.102.1.4.1.2
arpInspectVlanStatus	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.102.1.4.1.3

arpInspectPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.102.1.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpInspectPortTable'

Copy

arpInspectPortEntry row .1.3.6.1.4.1.890.1.5.8.56.102.1.5.1

Indexes

arpInspectPortIndex

Column	Syntax	OID
arpInspectPortIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.1.5.1.1
arpInspectPortTrust	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted	.1.3.6.1.4.1.890.1.5.8.56.102.1.5.1.2
arpInspectPortRate	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.8.56.102.1.5.1.3
arpInspectPortInterval	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.890.1.5.8.56.102.1.5.1.4

arpInspectFilterTable

table

.1.3.6.1.4.1.890.1.5.8.56.102.2.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpInspectFilterTable'

Copy

arpInspectFilterEntry row .1.3.6.1.4.1.890.1.5.8.56.102.2.3.1

Indexes

arpInspectFilterMac arpInspectFilterVid

Column	Syntax	OID
arpInspectFilterMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.1
arpInspectFilterVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.2
arpInspectFilterPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.3
arpInspectFilterExpiry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.4
arpInspectFilterReason	Enumeration Enumerated Values: 1 macVid 2 port 3 ip	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.5
arpInspectFilterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.102.2.3.1.6

arpInspectLogTable

table

.1.3.6.1.4.1.890.1.5.8.56.102.2.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpInspectLogTable'

Copy

arpInspectLogEntry row .1.3.6.1.4.1.890.1.5.8.56.102.2.4.1

Indexes

arpInspectLogMac arpInspectLogVid arpInspectLogPort arpInspectLogIp arpInspectLogReason

Column	Syntax	OID
arpInspectLogMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.1
arpInspectLogVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.2
arpInspectLogPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.3
arpInspectLogIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.4
arpInspectLogNumPkt	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.5
arpInspectLogReason	Enumeration Enumerated Values: 1 deny 2 denyStatic 3 denyDHCP 4 permitStatic 5 permitDHCP	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.6
arpInspectLogTime	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.56.102.2.4.1.7

arpInspectStatisticsTable

table

.1.3.6.1.4.1.890.1.5.8.56.102.2.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpInspectStatisticsTable'

Copy

arpInspectStatisticsEntry row .1.3.6.1.4.1.890.1.5.8.56.102.2.5.1

Indexes

arpInspectStatisticsVid

Column	Syntax	OID
arpInspectStatisticsVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.1
arpInspectStatisticsReceived	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.2
arpInspectStatisticsRequest	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.3
arpInspectStatisticsReply	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.4
arpInspectStatisticsForward	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.5
arpInspectStatisticsDrop	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.6
arpInspectStatisticsClear	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.102.2.5.1.7

loopGuardPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.104.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::loopGuardPortTable'

Copy

loopGuardPortEntry row .1.3.6.1.4.1.890.1.5.8.56.104.2.1

An entry in loopGuardPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
loopGuardPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.104.2.1.1

subnetBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.105.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::subnetBasedVlanTable'

Copy

subnetBasedVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.105.3.1

An entry in subnetBasedVlanTable.

Indexes

subnetBasedVlanSrcIp subnetBasedVlanSrcMaskBit

Column	Syntax	OID
subnetBasedVlanSrcIp source ip for subnet-based vlan entry	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.1
subnetBasedVlanSrcMaskBit source ip mask-bits for subnet-based vlan entry	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.2
subnetBasedVlanName name for subnet-based vlan entry	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.3
subnetBasedVlanVid vid for subnet-based vlan entry	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.4
subnetBasedVlanPriority priority for subnet-based vlan entry	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.5
subnetBasedVlanEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.105.3.1.6

mstMapTable

table

.1.3.6.1.4.1.890.1.5.8.56.107.20 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mstMapTable'

Copy

This table contains one entry for each instance of MSTP.

mstMapEntry row .1.3.6.1.4.1.890.1.5.8.56.107.20.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstMapIndex

Column	Syntax	OID
mstMapIndex Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.1
mstMapVlans1k A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.2
mstMapVlans2k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.3
mstMapVlans3k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.4
mstMapVlans4k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.5
mstMapRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.107.20.1.6

mstVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.107.30 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mstVlanTable'

Copy

This table contains one entry for each VlanId.

mstVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.107.30.1

Information regarding the instance to which each Vlan is mapped.

Indexes

mstVlanIndex

Column	Syntax	OID
mstVlanIndex The VlanId for which this entry contains the instance mapped.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.107.30.1.1
mstVlanMstIndex An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.8.56.107.30.1.2

mstpPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.107.40 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mstpPortTable'

Copy

A table that contains generic information about
every port that is associated with this bridge.

mstpPortEntry row .1.3.6.1.4.1.890.1.5.8.56.107.40.1

A list of information for each port of the
bridge.

Indexes

mstpPortIndex

Column	Syntax	OID
mstpPortIndex A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.56.107.40.1.1
mstpPortOperEdgePort	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.56.107.40.1.2
mstpPortOperPointToPointMAC	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.56.107.40.1.3
mstpPortAdminEdgePort The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.890.1.5.8.56.107.40.1.4

mstpXstTable

table

.1.3.6.1.4.1.890.1.5.8.56.107.50 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mstpXstTable'

Copy

.

mstpXstEntry row .1.3.6.1.4.1.890.1.5.8.56.107.50.1

.

Indexes

mstpXstId

Column	Syntax	OID
mstpXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.1
mstpXstBridgePriority Bridge priority, in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.2
mstpXstBridgeId .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.3
mstpXstInternalRootCost .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.4
mstpXstRootPort .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.5
mstpXstTimeSinceTopologyChange .	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.6
mstpXstTopologyChangesCount .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.107.50.1.7

mstpXstPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.107.60 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::mstpXstPortTable'

Copy

.

mstpXstPortEntry row .1.3.6.1.4.1.890.1.5.8.56.107.60.1

.

Indexes

mstpXstPortXstId mstpXstPortIndex

Column	Syntax	OID
mstpXstPortXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.1
mstpXstPortIndex The value of mstpPortIndex of the Port in mstpPortTable.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.2
mstpXstPortEnable .	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.3
mstpXstPortPriority Port priority, in steps of 16.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.4
mstpXstPortPathCost .	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.5
mstpXstPortState .	Enumeration Enumerated Values: 0 disabled 1 discarding 2 learning 3 forwarding 4 unknown	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.6
mstpXstPortDesignatedRoot .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.7
mstpXstPortDesignatedCost .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.8
mstpXstPortDesignatedBridge .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.9
mstpXstPortDesignatedPort .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.107.60.1.10

radiusAuthServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.108.1.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::radiusAuthServerTable'

Copy

radiusAuthServerEntry row .1.3.6.1.4.1.890.1.5.8.56.108.1.3.1

An entry in radiusAuthServerTable.

Indexes

radiusAuthServerIndex

Column	Syntax	OID
radiusAuthServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.108.1.3.1.1
radiusAuthServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.108.1.3.1.2
radiusAuthServerUdpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.108.1.3.1.3
radiusAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.108.1.3.1.4

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.108.2.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::radiusAcctServerTable'

Copy

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.8.56.108.2.2.1

An entry in radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column	Syntax	OID
radiusAcctServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.108.2.2.1.1
radiusAcctServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.108.2.2.1.2
radiusAcctServerUdpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.108.2.2.1.3
radiusAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.108.2.2.1.4

tacacsAuthServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.109.1.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::tacacsAuthServerTable'

Copy

tacacsAuthServerEntry row .1.3.6.1.4.1.890.1.5.8.56.109.1.3.1

An entry in tacacsAuthServerTable.

Indexes

tacacsAuthServerIndex

Column	Syntax	OID
tacacsAuthServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.109.1.3.1.1
tacacsAuthServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.109.1.3.1.2
tacacsAuthServerTcpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.109.1.3.1.3
tacacsAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.109.1.3.1.4

tacacsAcctServerTable

table

.1.3.6.1.4.1.890.1.5.8.56.109.2.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::tacacsAcctServerTable'

Copy

tacacsAcctServerEntry row .1.3.6.1.4.1.890.1.5.8.56.109.2.2.1

An entry in tacacsAcctServerTable.

Indexes

tacacsAcctServerIndex

Column	Syntax	OID
tacacsAcctServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.109.2.2.1.1
tacacsAcctServerIpAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.8.56.109.2.2.1.2
tacacsAcctServerTcpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.109.2.2.1.3
tacacsAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.109.2.2.1.4

authenticationTypeTable

table

.1.3.6.1.4.1.890.1.5.8.56.110.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authenticationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::authenticationTypeTable'

Copy

authenticationTypeEntry row .1.3.6.1.4.1.890.1.5.8.56.110.1.1.1

An entry in authenticationTypeTable.

Indexes

authenticationTypeName

Column	Syntax	OID
authenticationTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.110.1.1.1.1
authenticationTypeMethodList	OctetStringr/w	.1.3.6.1.4.1.890.1.5.8.56.110.1.1.1.2

accountingTypeTable

table

.1.3.6.1.4.1.890.1.5.8.56.110.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accountingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::accountingTypeTable'

Copy

accountingTypeEntry row .1.3.6.1.4.1.890.1.5.8.56.110.2.2.1

An entry in accountingTypeTable.

Indexes

accountingTypeName

Column	Syntax	OID
accountingTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.1
accountingTypeActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.2
accountingTypeBroadcast	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.3
accountingTypeMode	Enumerationr/w Enumerated Values: 1 start-stop 2 stop-only 255 not-available	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.4
accountingTypeMethod	Enumerationr/w Enumerated Values: 1 radius 2 tacacs	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.5
accountingTypePrivilege	Enumerationr/w Enumerated Values: 0 privilege-0 1 privilege-1 2 privilege-2 3 privilege-3 4 privilege-4 5 privilege-5 6 privilege-6 7 privilege-7 8 privilege-8 9 privilege-9 10 privilege-10 11 privilege-11 12 privilege-12 13 privilege-13 14 privilege-14 255 not-available	.1.3.6.1.4.1.890.1.5.8.56.110.2.2.1.6

authorizationTypeTable

table

.1.3.6.1.4.1.890.1.5.8.56.110.3.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authorizationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::authorizationTypeTable'

Copy

authorizationTypeEntry row .1.3.6.1.4.1.890.1.5.8.56.110.3.1.1

An entry in authorizationTypeTable.

Indexes

authorizationTypeName

Column	Syntax	OID
authorizationTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.110.3.1.1.1
authorizationTypeActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.110.3.1.1.2
authorizationTypeMethod	Enumerationr/w Enumerated Values: 1 radius 2 tacacs	.1.3.6.1.4.1.890.1.5.8.56.110.3.1.1.3

portIsolationTable

table

.1.3.6.1.4.1.890.1.5.8.56.112.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portIsolationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::portIsolationTable'

Copy

portIsolationEntry row .1.3.6.1.4.1.890.1.5.8.56.112.1.1

An entry in portIsolationTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portIsolationState Port isolation enabled/disabled on the port. Enable(1) to be isolated and not exchange packets.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.112.1.1.1

l2ptTable

table

.1.3.6.1.4.1.890.1.5.8.56.115.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk l2ptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::l2ptTable'

Copy

l2ptEntry row .1.3.6.1.4.1.890.1.5.8.56.115.3.1

An entry in l2ptTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
l2ptProtocolGroup L2PT protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 cdp 1 stp 2 vtp	.1.3.6.1.4.1.890.1.5.8.56.115.3.1.1
l2ptPointToPointProtocolGroup L2PT point-to-point protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 pagp 1 lacp 2 udld	.1.3.6.1.4.1.890.1.5.8.56.115.3.1.2
l2ptMode L2PT port role on the port	Enumerationr/w Enumerated Values: 1 access 2 tunnel	.1.3.6.1.4.1.890.1.5.8.56.115.3.1.3

transceiverSerialInfoTable

table

.1.3.6.1.4.1.890.1.5.8.56.117.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverSerialInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::transceiverSerialInfoTable'

Copy

transceiverSerialInfoEntry row .1.3.6.1.4.1.890.1.5.8.56.117.1.1

An entry in transceiverSerialInfoTable.

Indexes

transceiverSerialInfoEntryPort

Column	Syntax	OID
transceiverSerialInfoEntryPort Index of transceiverSerialInfo. It is referred to dot1dBasePort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.1
transceiverSerialInfoEntryStatus Transceiver module status.	Enumeration Enumerated Values: 1 ok-with-DDM 2 ok-without-DDM 3 nonoperational	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.2
transceiverSerialInfoEntryVendor Transceiver module vendor name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.3
transceiverSerialInfoEntryPartNo Part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.4
transceiverSerialInfoEntrySerialNo Serial number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.5
transceiverSerialInfoEntryRevision Revision level for part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.6
transceiverSerialInfoEntryDateCode Transceiver module vendor's manufacturing date code	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.7
transceiverSerialInfoEntryTransceiver Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.1.1.8

transceiverDdmInfoTable

table

.1.3.6.1.4.1.890.1.5.8.56.117.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverDdmInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::transceiverDdmInfoTable'

Copy

transceiverDdmInfoEntry row .1.3.6.1.4.1.890.1.5.8.56.117.2.1

An entry in transceiverDdmInfoTable.

Indexes

transceiverDdmInfoEntryPort transceiverDdmInfoEntryType

Column	Syntax	OID
transceiverDdmInfoEntryPort Index of transceiverDdmInfo. This will be referred to dot1dBasePort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.1
transceiverDdmInfoEntryType Transceiver module status.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.2
transceiverDdmInfoEntryAlarmMax Transceiver module vendor name.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.3
transceiverDdmInfoEntryAlarmMin Part number provided by transceiver module vendor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.4
transceiverDdmInfoEntryWarnMax Serial number provided by transceiver module vendor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.5
transceiverDdmInfoEntryWarnMin Revision level for part number provided by transceiver module vendor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.6
transceiverDdmInfoEntryCurrent Transceiver module vendor's manufacturing date code	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.7
transceiverDdmInfoEntryDescription Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.56.117.2.1.8

zyswdot1agCfmMepTable

table

.1.3.6.1.4.1.890.1.5.8.56.119.1.7.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk zyswdot1agCfmMepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::zyswdot1agCfmMepTable'

Copy

zyswdot1agCfmMepEntry row .1.3.6.1.4.1.890.1.5.8.56.119.1.7.1.1

The dot1agCfmMep table entry

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier

Column	Syntax	OID
zyswdot1agCfmMepTransmitLbmDataTlvSize Size of data to be included in the LBM Data TLV	Unsigned32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.890.1.5.8.56.119.1.7.1.1.1

poEPsePortTable

table

.1.3.6.1.4.1.890.1.5.8.56.120.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk poEPsePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::poEPsePortTable'

Copy

PoE port table

poEPsePortEntry row .1.3.6.1.4.1.890.1.5.8.56.120.2.1

An entry in poEPsePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
poEPsePortPowerConsumption PoE PSE port power consumption expressed in milliwatt.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.120.2.1.1

sysMemoryPoolTable

table

.1.3.6.1.4.1.890.1.5.8.56.124.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysMemoryPoolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::sysMemoryPoolTable'

Copy

sysMemoryPoolEntry row .1.3.6.1.4.1.890.1.5.8.56.124.1.1

A system memory pool entry

Indexes

sysMemoryPoolId

Column	Syntax	OID
sysMemoryPoolId The memory pool id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.124.1.1.1
sysMemoryPoolName Name of the memory pool	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.56.124.1.1.2
sysMemoryPoolTotal Total size of memory pool in bytes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.124.1.1.3
sysMemoryPoolUsed Used size of memory pool in bytes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.56.124.1.1.4
sysMemoryPoolUtil Utilization of memory pool in bytes	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.890.1.5.8.56.124.1.1.5

pppoeIaPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.125.1.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIaPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::pppoeIaPortTable'

Copy

pppoeIaPortEntry row .1.3.6.1.4.1.890.1.5.8.56.125.1.7.1

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
pppoeIaPortEntryPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.125.1.7.1.1
pppoeIaPortEntryTrust	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.125.1.7.1.2
pppoeIaPortEntryCircuitIDString	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.125.1.7.1.3
pppoeIaPortEntryRemoteIDString	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.125.1.7.1.4

pppoeIaVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.125.1.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIaVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::pppoeIaVlanTable'

Copy

pppoeIaVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.125.1.8.1

Indexes

pppoeIaVlanEntryVid

Column	Syntax	OID
pppoeIaVlanEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.8.56.125.1.8.1.1
pppoeIaVlanEntryCircuitID	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.125.1.8.1.2
pppoeIaVlanEntryRemoteID	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.125.1.8.1.3
pppoeIaVlanEntryRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.125.1.8.1.4

pppoeIaPortVlanTable

table

.1.3.6.1.4.1.890.1.5.8.56.125.1.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIaPortVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::pppoeIaPortVlanTable'

Copy

pppoeIaPortVlanEntry row .1.3.6.1.4.1.890.1.5.8.56.125.1.9.1

An entry in pppoe ia port & vlan table

Indexes

pppoeIaPortVlanEntryPort pppoeIaPortVlanEntryVid

Column	Syntax	OID
pppoeIaPortVlanEntryPort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.125.1.9.1.1
pppoeIaPortVlanEntryVid vid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.125.1.9.1.2
pppoeIaPortVlanEntryCircuitIDString The circuit-id string of pppoe ia port & vlan entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.125.1.9.1.3
pppoeIaPortVlanEntryRemoteIDString The remote-id string of pppoe ia port & vlan entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.8.56.125.1.9.1.4
pppoeIaPortVlanEntryRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.56.125.1.9.1.5

arpLearningPortTable

table

.1.3.6.1.4.1.890.1.5.8.56.126.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpLearningPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::arpLearningPortTable'

Copy

arpLearningPortEntry row .1.3.6.1.4.1.890.1.5.8.56.126.1.1

An entry in arpLearningPortTable.
Modes: arp-reply(0), gratuitous-arp(1), arp-request(2)

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
arpLearningPortMode ArpLearning Mode on the port.	Enumerationr/w Enumerated Values: 0 arp-reply 1 gratuitous-arp 2 arp-request	.1.3.6.1.4.1.890.1.5.8.56.126.1.1.1

errdisableRecoveryReasonTable

table

.1.3.6.1.4.1.890.1.5.8.56.130.1.1.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableRecoveryReasonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::errdisableRecoveryReasonTable'

Copy

errdisableRecoveryReasonEntry row .1.3.6.1.4.1.890.1.5.8.56.130.1.1.2.1

Indexes

errdisableRecoveryReason

Column	Syntax	OID
errdisableRecoveryReason	Enumeration Enumerated Values: 0 loopguard 1 arp 2 bpdu 3 igmp	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.2.1.1
errdisableRecoveryReasonActive	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.2.1.2
errdisableRecoveryReasonInterval	Integer32r/w Constraints: range: 30-2592000	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.2.1.3

errdisableRecoveryIfStatusTable

table

.1.3.6.1.4.1.890.1.5.8.56.130.1.1.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableRecoveryIfStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::errdisableRecoveryIfStatusTable'

Copy

errdisableRecoveryIfStatusEntry row .1.3.6.1.4.1.890.1.5.8.56.130.1.1.3.1

Indexes

errdisableRecoveryIfStatusReason errdisableRecoveryIfStatusPort

Column	Syntax	OID
errdisableRecoveryIfStatusReason	Enumeration Enumerated Values: 0 loopguard 1 arp 2 bpdu 3 igmp	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.3.1.1
errdisableRecoveryIfStatusPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.3.1.2
errdisableRecoveryIfStatusTimeToRecover	Integer32 Constraints: range: 30-2592000	.1.3.6.1.4.1.890.1.5.8.56.130.1.1.3.1.3

errdisableDetectReasonTable

table

.1.3.6.1.4.1.890.1.5.8.56.130.2.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableDetectReasonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::errdisableDetectReasonTable'

Copy

errdisableDetectReasonEntry row .1.3.6.1.4.1.890.1.5.8.56.130.2.1.1

An entry in errdisableDetectReasonTable.

Indexes

errdisableDetectReason

Column	Syntax	OID
errdisableDetectReason	Enumeration Enumerated Values: 1 arp 2 bpdu 3 igmp	.1.3.6.1.4.1.890.1.5.8.56.130.2.1.1.1
errdisableDetectReasonEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.56.130.2.1.1.2
errdisableDetectReasonMode	Enumerationr/w Enumerated Values: 1 inactive-port 2 inactive-reason 3 rate-limitation	.1.3.6.1.4.1.890.1.5.8.56.130.2.1.1.3

cpuProtectionTable

table

.1.3.6.1.4.1.890.1.5.8.56.131.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cpuProtectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-GS2200-24P-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-GS2200-24P-MIB::cpuProtectionTable'

Copy

cpuProtectionEntry row .1.3.6.1.4.1.890.1.5.8.56.131.1.1

An entry in CPUProtectionTable.

Indexes

cpuProtectionPort cpuProtectionReason

Column	Syntax	OID
cpuProtectionPort The Protected Port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.56.131.1.1.1
cpuProtectionReason The Protected Reason	Enumeration Enumerated Values: 1 arp 2 bpdu 3 igmp	.1.3.6.1.4.1.890.1.5.8.56.131.1.1.2
cpuProtectionRateLimitSet The rate limit of a reason on a port	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.890.1.5.8.56.131.1.1.3