ZYXEL-ES3124-MIB Table View

Defines the ping Control Table for providing, via SNMP,
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the
pingProbeHistoryTable.

pingCtlEntry row .1.3.6.1.4.1.890.1.5.8.12.23.2.1

Defines an entry in the pingCtlTable. The first index
element, pingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)…

Indexes

pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName

Column	Syntax	OID
pingCtlServInstType The type of the service instance that this ping entry belong to. 1: VLAN. This item would be used as an index	Enumeration Enumerated Values: 1 vlan	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.1
pingCtlServInstId The ID of the service instance that this ping entry belong to. This item would be used as an index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.2
pingCtlOwnerIndex To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entri…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.3
pingCtlTestName The name of the ping test. This is locally unique, within the scope of an pingCtlOwnerIndex.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.4
pingCtlTargetAddressType Specifies the type of host address to be used at a remote host for performing a ping operation.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.5
pingCtlTargetAddress Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the object value of corresponding pingCtlTargetAddressType. A value for this object MUST be…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.6
pingCtlDataSize Specifies the size of the data portion to be transmitted in a ping operation in octets. A ping request is usually an ICMP message encoded into an IP packet. An IP packet has a maximum size of 65535 octets. Subtractin…	octetsUnsigned32r/w Constraints: range: 0-65507	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.7
pingCtlTimeOut Specifies the time-out value, in seconds, for a remote ping operation.	secondsUnsigned32r/w Constraints: range: 1-60	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.8
pingCtlProbeCount Specifies the number of times to perform a ping operation at a remote host.	probesUnsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.9
pingCtlAdminStatus Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disabled(2) - Deactivate the test as defined by this pin…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.10
pingCtlDataFill The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting a data fill pattern can be useful when links…	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.11
pingCtlFrequency The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determi…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.12
pingCtlMaxRows The maximum number of entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the pingProbeHistoryTable to allow the addition of an new entry once the number of rows …	rowsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.13
pingCtlStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.14
pingCtlTrapGeneration The value of this object determines when and if to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subject to the value of pingCtlTrapProbeFailureFilter. The …	Bitsr/w Enumerated Values: 0 probeFailure 1 testFailure 2 testCompletion	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.15
pingCtlTrapProbeFailureFilter The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting pingCtlTrapGeneration to probeFailure(0) implies that a pingProbeFailed NOTIFICATION is generated onl…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.16
pingCtlTrapTestFailureFilter The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting pingCtlTrapGeneration to testFailure(1) implies that a pingTestFailed NOTIFICATION is generated only when the number …	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.17
pingCtlType The value of this object is used to either report or select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected from pingImplementationTypeDomains. Additi…	ObjectIdentifierr/w	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.18
pingCtlDescr The purpose of this object is to provide a descriptive name of the remote ping test.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.19
pingCtlSourceAddressType Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when performing a ping operation.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.20
pingCtlSourceAddress Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.21
pingCtlIfIndex Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero for this object means that this option is …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.22
pingCtlByPassRouteTable The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.23
pingCtlDSField Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic …	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.24
pingCtlRowStatus This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in all corresponding (same pingCtlOwnerIndex and pingCtlTestName index values) pingResultsTable and p…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.12.23.2.1.25

Defines the Ping Results Table for providing
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the pingPastProbeTable.
An entry is added to the pingResultsTable when an
pingCtlEntry is started by successful transition
of its pingCtlAdminStatus object to enabled(1).
An entry is removed from the pingResultsTable when
its corresponding pingCtlEntry is deleted.

pingResultsEntry row .1.3.6.1.4.1.890.1.5.8.12.23.3.1

Defines an entry in the pingResultsTable. The
pingResultsTable has the same indexing as the
pingCtlTable in order for a pingResultsEntry to
correspond to the pingCtlEntry that caused it to
be created.

Indexes

pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName

Column	Syntax	OID
pingResultsOperStatus Reflects the operational state of a pingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.1
pingResultsIpTargetAddressType This objects indicates the type of address stored in the corresponding pingResultsIpTargetAddress object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.2
pingResultsIpTargetAddress This objects reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS name is…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.3
pingResultsMinRtt The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.4
pingResultsMaxRtt The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.5
pingResultsAverageRtt The current average ping round-trip-time (RTT).	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.6
pingResultsProbeResponses Number of responses received for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.	responsesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.7
pingResultsSentProbes The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.	probesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.8
pingResultsRttSumOfSquares This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The value of this object MUST be reported as 0 when no ping responses have been rec…	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.9
pingResultsLastGoodProbe Date and time when the last response was received for a probe.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.12.23.3.1.10

Defines a table for storing the results of a ping
operation.  Entries in this table are limited by
the value of the corresponding pingCtlMaxRows
object.
An entry in this table is created when the result of
a ping probe is determined.  The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to.  An entry is removed from this table when
its corresponding pingCtlEntry is deleted.
An implementation of this MIB will remove the oldest
entry in the pingProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the pingProbeHistoryTable reaches the value specified
by pingCtlMaxRows.

pingProbeHistoryEntry row .1.3.6.1.4.1.890.1.5.8.12.23.4.1

Defines an entry in the pingProbeHistoryTable.
The first two index elements identify the
pingCtlEntry that a pingProbeHistoryEntry belongs
to. The third index element selects a single
probe result.

Indexes

pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName pingProbeHistoryIndex

Column	Syntax	OID
pingProbeHistoryIndex An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to. An imple…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.4.1.1
pingProbeHistoryResponse The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.4.1.2
pingProbeHistoryStatus The result of a particular probe done by a remote host.	DISMAN-PING-MIBOperationResponseStatus Type Values: 1 responseReceived 2 unknown 3 internalError 4 requestTimedOut 5 unknownDestinationAddress 6 noRouteToTarget 7 interfaceInactiveToTarget 8 arpFailure 9 maxConcurrentLimitReached 10 unableToResolveDnsName 11 invalidHostAddress	.1.3.6.1.4.1.890.1.5.8.12.23.4.1.3
pingProbeHistoryLastRC The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP-ECHOREPLY(0). The ICMP r…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.12.23.4.1.4
pingProbeHistoryTime Timestamp for when this probe result was determined.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.12.23.4.1.5

Defines the Remote Operations Traceroute Control Table for
providing the capability of invoking traceroute from a remote
host.  The results of traceroute operations can be stored in
the traceRouteResultsTable, traceRouteProbeHistoryTable, and
the traceRouteHopsTable.

traceRouteCtlEntry row .1.3.6.1.4.1.890.1.5.8.12.23.5.1

Defines an entry in the traceRouteCtlTable. The first
index element, traceRouteCtlOwnerIndex, is of type
SnmpAdminString, a textual convention that allows for
use of the SNMPv3 View-Based Access Control Model
(RFC 2575…

Indexes

traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName

Column	Syntax	OID
traceRouteCtlServInstType The type of the service instance that this traceRoute entry belong to. 1: VLAN. This item would be used as an index	Enumeration Enumerated Values: 1 vlan	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.1
traceRouteCtlServInstId The ID of the service instance that this traceRoute entry belong to. This item would be used as an index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.2
traceRouteCtlOwnerIndex To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entri…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.3
traceRouteCtlTestName The name of a traceroute test. This is locally unique, within the scope of an traceRouteCtlOwnerIndex.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.4
traceRouteCtlTargetAddressType Specifies the type of host address to be used on the traceroute request at the remote host.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.5
traceRouteCtlTargetAddress Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding traceRouteCtlTargetAddressType index element. A valu…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.6
traceRouteCtlByPassRouteTable The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.7
traceRouteCtlDataSize Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtracting the size of a UDP header (8 octets) …	octetsUnsigned32r/w Constraints: range: 0-65507	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.8
traceRouteCtlTimeOut Specifies the time-out value, in seconds, for a traceroute request.	secondsUnsigned32r/w Constraints: range: 1-60	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.9
traceRouteCtlProbesPerHop Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.	probesUnsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.10
traceRouteCtlPort Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IANA assigned port, 33434, for the tracero…	UDP PortUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.11
traceRouteCtlMaxTtl Specifies the maximum time-to-live value.	time-to-live valueUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.12
traceRouteCtlDSField Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Tr…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.13
traceRouteCtlSourceAddressType Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.14
traceRouteCtlSourceAddress Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source add…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.15
traceRouteCtlIfIndex Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A value of zero for this object implies that t…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.16
traceRouteCtlMiscOptions Enables an application to specify implementation dependent options.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.17
traceRouteCtlMaxFailures The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/possible TTL value) or a 0 indicates that t…	timeoutsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.18
traceRouteCtlDontFragment This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.19
traceRouteCtlInitialTtl The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.20
traceRouteCtlFrequency The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in a single traceroute test is determined by the value of the …	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.21
traceRouteCtlStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.22
traceRouteCtlAdminStatus Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2) - Deactivate the test as defined b…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.23
traceRouteCtlDescr The purpose of this object is to provide a descriptive name of the remote traceroute test.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.24
traceRouteCtlMaxRows The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow the addition of an new entry once the num…	rowsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.25
traceRouteCtlTrapGeneration The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a traceRoutePathChange notification when the current path varies from a previously deter…	Bitsr/w Enumerated Values: 0 pathChange 1 testFailure 2 testCompletion	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.26
traceRouteCtlCreateHopsEntries The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true(1).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.27
traceRouteCtlType The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected from traceRouteImplementationTypeDomains. …	ObjectIdentifierr/w	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.28
traceRouteCtlRowStatus This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same traceRouteCtlOwnerIndex and traceRouteCtlTestName index values) trac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.8.12.23.5.1.29

Defines the Remote Operations Traceroute Results Table for
keeping track of the status of a traceRouteCtlEntry.
          
An entry is added to the traceRouteResultsTable when an
traceRouteCtlEntry is started by successful transition
of its traceRouteCtlAdminStatus object to enabled(1).
An entry is removed from the traceRouteResultsTable when
its corresponding traceRouteCtlEntry is deleted.

traceRouteResultsEntry row .1.3.6.1.4.1.890.1.5.8.12.23.6.1

Defines an entry in the traceRouteResultsTable. The
traceRouteResultsTable has the same indexing as the
traceRouteCtlTable in order for a traceRouteResultsEntry
to correspond to the traceRouteCtlEntry that caused it to…

Indexes

traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName

Column	Syntax	OID
traceRouteResultsOperStatus Reflects the operational state of an traceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.1
traceRouteResultsCurHopCount Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by traceRouteCtlMaxTtl.	hopsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.2
traceRouteResultsCurProbeCount Reflects the current probe count (1..10) for a remote traceroute operation. The maximum probe count is determined by traceRouteCtlProbesPerHop.	probesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.3
traceRouteResultsIpTgtAddrType This objects indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.4
traceRouteResultsIpTgtAddr This objects reports the IP address associated with a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS na…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.5
traceRouteResultsTestAttempts The current number of attempts to determine a path to a target. The value of this object MUST be started at 0.	testsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.6
traceRouteResultsTestSuccesses The current number of attempts to determine a path to a target that have succeeded. The value of this object MUST be reported as 0 when no attempts have succeeded.	testsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.7
traceRouteResultsLastGoodPath The date and time when the last complete path was determined.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.12.23.6.1.8

Defines the Remote Operations Traceroute Results Table for
storing the results of a traceroute operation.
An implementation of this MIB will remove the oldest
entry in the traceRouteProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the traceRouteProbeHistoryTable reaches the value specified
by traceRouteCtlMaxRows.

traceRouteProbeHistoryEntry row .1.3.6.1.4.1.890.1.5.8.12.23.7.1

Defines a table for storing the results of a traceroute
operation. Entries in this table are limited by
the value of the corresponding traceRouteCtlMaxRows
object.
The first two index elements identify the
traceRouteCt…

Indexes

traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName traceRouteProbeHistoryIndex traceRouteProbeHistoryHopIndex traceRouteProbeHistoryProbeIndex

Column	Syntax	OID
traceRouteProbeHistoryIndex An entry in this table is created when the result of a traceroute probe is determined. The initial 2 instance identifier index values identify the traceRouteCtlEntry that a probe result (traceRouteProbeHistoryEntry) be…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.1
traceRouteProbeHistoryHopIndex Indicates which hop in a traceroute path that the probe's results are for. The value of this object is initially determined by the value of traceRouteCtlInitialTtl.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.2
traceRouteProbeHistoryProbeIndex Indicates the index of a probe for a particular hop in a traceroute path. The number of probes per hop is determined by the value of the corresponding traceRouteCtlProbesPerHop object.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.3
traceRouteProbeHistoryHAddrType This objects indicates the type of address stored in the corresponding traceRouteProbeHistoryHAddr object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.4
traceRouteProbeHistoryHAddr The address of a hop in a traceroute path. This object is not allowed to be a DNS name. The value of the corresponding object, traceRouteProbeHistoryHAddrType, indicates this object's IP address type.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.5
traceRouteProbeHistoryResponse The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.6
traceRouteProbeHistoryStatus The result of a traceroute operation made by a remote host for a particular probe.	DISMAN-PING-MIBOperationResponseStatus Type Values: 1 responseReceived 2 unknown 3 internalError 4 requestTimedOut 5 unknownDestinationAddress 6 noRouteToTarget 7 interfaceInactiveToTarget 8 arpFailure 9 maxConcurrentLimitReached 10 unableToResolveDnsName 11 invalidHostAddress	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.7
traceRouteProbeHistoryLastRC The last implementation method specific reply code received. Traceroute is usually implemented by transmitting a series of probe packets with increasing time-to-live values. A probe packet is a UDP datagram encapsulate…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.8
traceRouteProbeHistoryTime Timestamp for when this probe results were determined.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.12.23.7.1.9

Defines the Remote Operations Traceroute Hop Table for
keeping track of the results of traceroute tests on a
per hop basis.

traceRouteHopsEntry row .1.3.6.1.4.1.890.1.5.8.12.23.8.1

Defines an entry in the traceRouteHopsTable.
The first two index elements identify the
traceRouteCtlEntry that a traceRouteHopsEntry
belongs to. The third index element,
traceRouteHopsHopIndex, selects a
hop in a trace…

Indexes

traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName traceRouteHopsHopIndex

Column	Syntax	OID
traceRouteHopsHopIndex Specifies the hop index for a traceroute hop. Values for this object with respect to the same traceRouteCtlOwnerIndex and traceRouteCtlTestName MUST start at 1 and increase monotonically. The traceRouteHopsTable keeps …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.1
traceRouteHopsIpTgtAddressType This objects indicates the type of address stored in the corresponding traceRouteHopsIpTargetAddress object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.2
traceRouteHopsIpTgtAddress This object reports the IP address associated with the hop. A value for this object should be reported as a numeric IP address and not as a DNS name.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.3
traceRouteHopsMinRtt The minimum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.4
traceRouteHopsMaxRtt The maximum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.5
traceRouteHopsAverageRtt The current average traceroute round-trip-time (RTT) for this hop.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.6
traceRouteHopsRttSumOfSquares This object contains the sum of all traceroute responses received for this hop. Its purpose is to enable standard deviation calculation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.7
traceRouteHopsSentProbes The value of this object reflects the number of probes sent for this hop during this traceroute test. The value of this object should start at 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.8
traceRouteHopsProbeResponses Number of responses received for this hop during this traceroute test. This value of this object should start at 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.9
traceRouteHopsLastGoodProbe Date and time was the last response was received for a probe for this hop during this traceroute test.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.8.12.23.8.1.10

A list of currently active fault events. All faults 
of normal type regardless of their severity level 
are recorded in the event table. When a normal 
type fault is cleared it is deleted from the event 
table.

eventEntry row .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column	Syntax	OID
eventSeqNum This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is increm…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.1
eventEventId This variable represents the event ID which uniquely identifies the event in the entire system.	EventIdNumber	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.2
eventName This variable represents the name of the event, for example 'Ethernet Link Down'	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.3
eventInstanceType This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For…	InstanceType Type Values: 1 unknown 2 node 3 shelf 4 line 5 switch 6 lsp 7 l2Interface 8 l3Interface 9 rowIndex	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.4
eventInstanceId This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more …	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.5
eventInstanceName This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstance…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.6
eventSeverity This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention t…	EventSeverity Type Values: 1 critical 2 major 3 minor 4 informational	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.7
eventSetTime This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.	UtcTimeStamp	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.8
eventDescription This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no us…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.9
eventServAffective This variable indicates whether the event is service affective or not	EventServiceAffective Type Values: 1 noServiceAffected 2 serviceAffected	.1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.10