ZYXEL-CLUSTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
15

zyxelClusterManagerTable

table
.1.3.6.1.4.1.890.1.15.3.14.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelClusterManagerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-CLUSTER-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-CLUSTER-MIB::zyxelClusterManagerTable' 
The table contains cluster manager configuration.
zyxelClusterManagerEntry row .1.3.6.1.4.1.890.1.15.3.14.1.1.2.1
An entry contains cluster manager configuration.
Indexes
Column Syntax OID
zyClusterManagerVid
This is the VLAN ID and is only applicable if the switch is set to 802.1Q VLAN.
All switches must be directly connected and in the same VLAN group to belong to the same cluster.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.14.1.1.2.1.1
zyClusterManagerName
Type a name to identify the cluster manager.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.1.1.2.1.2
zyClusterManagerRowStatus
This object allows cluster manager entries to be created and deleted from cluster manager table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.14.1.1.2.1.3

zyxelClusterMemberTable

table
.1.3.6.1.4.1.890.1.15.3.14.1.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelClusterMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-CLUSTER-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-CLUSTER-MIB::zyxelClusterMemberTable' 
The table contains cluster member configuration.
zyxelClusterMemberEntry row .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1
An entry contains cluster member configuration.
Indexes
Column Syntax OID
zyClusterMemberMacAddress
This is the cluster member switch's hardware MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1.1
zyClusterMemberName
This is the cluster member switch's system name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1.2
zyClusterMemberModel
This is the cluster member switch's model name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1.3
zyClusterMemberPassword
Each cluster member's password is its administration password.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1.4
zyClusterMemberRowStatus
This object allows cluster member entries to be created and deleted from cluster member table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.14.1.2.2.1.5

zyxelClusterCandidateTable

table
.1.3.6.1.4.1.890.1.15.3.14.2.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelClusterCandidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-CLUSTER-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-CLUSTER-MIB::zyxelClusterCandidateTable' 
The table contains cluster candidate information.
zyxelClusterCandidateEntry row .1.3.6.1.4.1.890.1.15.3.14.2.1.1.1
An entry contains cluster candidate information.
Indexes
Column Syntax OID
zyClusterCandidateMacAddress
This is the cluster candidate switch's hardware MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.890.1.15.3.14.2.1.1.1.1
zyClusterCandidateName
This is the cluster candidate switch's system name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.2.1.1.1.2
zyClusterCandidateModel
This is the cluster candidate switch's model name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.2.1.1.1.3

zyxelClusterInfoMemberTable

table
.1.3.6.1.4.1.890.1.15.3.14.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelClusterInfoMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-CLUSTER-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-CLUSTER-MIB::zyxelClusterInfoMemberTable' 
The table contains cluster member information.
zyxelClusterInfoMemberEntry row .1.3.6.1.4.1.890.1.15.3.14.2.4.1
An entry contains cluster member information.
Indexes
Column Syntax OID
zyClusterInfoMemberMacAddress
This is the cluster member switch's hardware MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.890.1.15.3.14.2.4.1.1
zyClusterInfoMemberName
This is the cluster member switch's system name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.2.4.1.2
zyClusterInfoMemberModel
This is the cluster member switch's model name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.14.2.4.1.3
zyClusterInfoMemberStatus
There are three types in cluster status. Online(the cluster member switch is accessible),
Error (for example, the cluster member switch password was changed or the switch was set
as the manager and so left the member …
Enumeration
Enumerated Values:
0error
1online
2offline
 .1.3.6.1.4.1.890.1.15.3.14.2.4.1.4