ZYXEL-AAM1212 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

308

alarmConfTable

table

.1.3.6.1.4.1.890.1.5.11.11.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk alarmConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::alarmConfTable'

This table includes alarm configuration.

alarmConfEntry row .1.3.6.1.4.1.890.1.5.11.11.2.2.1

An entry in alarmConfTable.

Indexes

alarmConfId

Column Syntax OID

alarmConfId

5000:adslLine_up
5001:adslLine_down
5002:adslPerf_lol_thresh
5003:adslPerf_lof_thresh
5004:adslPerf_los_thresh
5005:adslPerf_lop_thresh
5006:adslPerf_es_thresh
5007:adslPerf_ses_thresh
5008:adslPerf_uas_thresh
5009:adsl…

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.2.1.1

alarmConfFacility

Alarm facility.

Enumerationr/w

Enumerated Values:

1	local1
2	local2
3	local3
4	local4
5	local5
6	local6
7	local7

.1.3.6.1.4.1.890.1.5.11.11.2.2.1.2

alarmConfTarget

The destination which alarms are reported to. Set the bit to 1 to enable the target.
BIT 1: snmp trap
BIT 2: syslog

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.2.1.3

alarmConfSeverity

Alarm severity

Enumerationr/w

Enumerated Values:

1	critical
2	major
3	minor
4	info

.1.3.6.1.4.1.890.1.5.11.11.2.2.1.4

alarmConfClearable

Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.

Enumerationr/w

Enumerated Values:

1	clearable
2	unclearable

.1.3.6.1.4.1.890.1.5.11.11.2.2.1.5

alarmCurrTable

table

.1.3.6.1.4.1.890.1.5.11.11.2.3 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk alarmCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::alarmCurrTable'

This table includes current alarm information.

alarmCurrEntry row .1.3.6.1.4.1.890.1.5.11.11.2.3.1

An entry in alarmCurrTable.

Indexes

alarmCurrIndex

Column Syntax OID

alarmCurrIndex

Index of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.1

alarmCurrOccurTime

Alarm occurence time (in hundredths of a second) since the system was last re-initialized.

RFC1155-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.2

alarmCurrTrapOid

Trap OID of the alarm.

ObjectIdentifier

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.3

alarmCurrParam1

The 1st parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.4

alarmCurrParam2

The 2nd parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.5

alarmCurrParam3

The 3rd parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.6

alarmCurrParam4

The 4th parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.7

alarmCurrParam5

The 5th parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.8

alarmCurrParam6

The 6th parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.9

alarmCurrParam7

The 7th parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.10

alarmCurrParam8

The 8th parameter of the alarm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.11

alarmCurrTimeDescr

The string representation of occurence time (YYYY/MM/DD HH:MM:SS).

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.12

alarmCurrSeverity

The severity of the alarm.

Enumeration

Enumerated Values:

1	critical
2	major
3	minor
4	info

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.13

alarmCurrDescr

The description of the alarm.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.2.3.1.14

alarmSeverityPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.2.4 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk alarmSeverityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::alarmSeverityPortTable'

This table includes the configuration of alarm reporting severity threshold for each port.

alarmSeverityPortEntry row .1.3.6.1.4.1.890.1.5.11.11.2.4.1

An entry in alarmSeverityPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

severityThresh

The minimum alarm severity that is reported.

Enumerationr/w

Enumerated Values:

1	critical
2	major
3	minor
4	info

.1.3.6.1.4.1.890.1.5.11.11.2.4.1.1

mcastBwTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.4.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mcastBwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::mcastBwTable'

This table defines bandwidth budget for a range of multicast IP channels.

mcastBwEntry row .1.3.6.1.4.1.890.1.5.11.11.7.4.3.1

An entry of mcastBwTable.

Indexes

mcastBwIndex mcastBwStartIp mcastBwEndIp

Column Syntax OID

mcastBwIndex

The index which specify the entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.7.4.3.1.1

mcastBwStartIp

The start multicast IP of the bandwidth control range.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.7.4.3.1.2

mcastBwEndIp

The end multicast IP of the bandwidth control range.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.7.4.3.1.3

mcastBwBandwidth

The bandwidth budget for the multicast IP channels.

KbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.7.4.3.1.4

mcastBwRowStatus

The row status of the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.890.1.5.11.11.7.4.3.1.5

mcastBwPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.4.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mcastBwPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::mcastBwPortTable'

This table specify the multicast bandwidth control of the port.

mcastBwPortEntry row .1.3.6.1.4.1.890.1.5.11.11.7.4.4.1

An entry of mcastBwPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

mcastBwPortEnable

Enable/disable multicast bandwidth control for a port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.7.4.4.1.1

mcastBwPortBandwidth

Set bandwidth threshold for a port.

KbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.7.4.4.1.2

igmpCountPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.5.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCountPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpCountPortTable'

This table specify the IGMP count limiting of the port.

igmpCountPortEntry row .1.3.6.1.4.1.890.1.5.11.11.7.5.1.1

An entry of igmpCountPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

igmpCountPortEnable

Enable/disable IGMP count limiting for a port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.7.5.1.1.1

igmpCountPortLimit

The maximum allowed IGMP report count for a port.

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.890.1.5.11.11.7.5.1.1.2

mvlanTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.6.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::mvlanTable'

A table containing static configuration information for
each multicast VLAN configured into the device.

mvlanEntry row .1.3.6.1.4.1.890.1.5.11.11.7.6.2.1

An entry of mvlanTable.

Indexes

mvlanIndex

Column Syntax OID

mvlanIndex

The VLAN-ID refering to this VLAN.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.7.6.2.1.1

mvlanName

An administratively assigned string, which may be used to identify the VLAN.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.11.11.7.6.2.1.2

mvlanEgressPorts

The set of ports which are permanently assigned to the
egress list for this multicast VLAN.

Q-BRIDGE-MIBPortListr/w

.1.3.6.1.4.1.890.1.5.11.11.7.6.2.1.3

mvlanUntaggedPorts

The set of ports which should transmit egress packets
for this multicast VLAN as untagged.

Q-BRIDGE-MIBPortListr/w

.1.3.6.1.4.1.890.1.5.11.11.7.6.2.1.4

mvlanRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.7.6.2.1.5

mvlanTranslateTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.6.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvlanTranslateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::mvlanTranslateTable'

A table that contains multicast to VLAN translation.

mvlanTranslateEntry row .1.3.6.1.4.1.890.1.5.11.11.7.6.3.1

An entry of mvlanTranslateTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex mvlanTranslateIndex

Column	Syntax	OID
mvlanTranslateIndex The index which specif the entry.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.7.6.3.1.1`
mvlanTranslateStartIp The start IP of the multicast VLAN translation.	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.7.6.3.1.2`
mvlanTranslateEndIp The end IP of the multicast VLAN translation.	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.7.6.3.1.3`

qryVidConfTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.7.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qryVidConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::qryVidConfTable'

This table defines statically set VLANs used for response IGMP report.
This table is supported by R1.02 and later versions.

qryVidConfEntry row .1.3.6.1.4.1.890.1.5.11.11.7.7.2.1

An entry in qryVidConfTable.

Indexes

qryVid

Column Syntax OID

qryVid

VLAN ID.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.7.7.2.1.1

qryVidRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.7.7.2.1.2

qryVidStatusTable

table

.1.3.6.1.4.1.890.1.5.11.11.7.7.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qryVidStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::qryVidStatusTable'

This table shows statically set or dynamically learned VLANs used for response IGMP report.

qryVidStatusEntry row .1.3.6.1.4.1.890.1.5.11.11.7.7.3.1

An entry in qryVidStatusTable.

Indexes

qryVid

Column Syntax OID

qryVidType

VLAN type.

Enumeration

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.890.1.5.11.11.7.7.3.1.1

subrPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::subrPortTable'

This table includes subscriber attributes for the port.

subrPortEntry row .1.3.6.1.4.1.890.1.5.11.11.8.1.1

An entry in subrPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
subrPortName Name of the subscriber.	OctetStringr/w Constraints: `range: 0-31`	`.1.3.6.1.4.1.890.1.5.11.11.8.1.1.1`
subrPortTel Telephone number of the subscriber.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.890.1.5.11.11.8.1.1.2`

adslLineConfTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.2.1 · 1 row entry · 22 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk adslLineConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::adslLineConfTable'

This table includes common attributes describing the ADSL line.

adslLineConfEntry row .1.3.6.1.4.1.890.1.5.11.11.8.2.1.1

An entry in adslLineConfTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

adslLineConfAdslMode

G.lite and T1.413 are only applicable to annex A board.
ETSI is only applicable to annex B board.

Enumerationr/w

Enumerated Values:

1	gDotLite
2	gDotDmt
3	t1Dot413
4	auto
5	etsi
6	adsl2
7	adsl2Plus

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.1

adslLineConfAnnexL

Enable/disable annex L for the port(Only in AnnexA).

Enumerationr/w

Enumerated Values:

1	enableNarrowMode
2	enableWideMode
3	disable

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.2

adslLineConfAnnexM

Enable/disable annex M for the port(For BCM AnnexA solution).

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.3

adslLineConfAnnexI

Enable/disable annex I for the port(For BCM AnnexA solution).

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.4

adslLineConfOptionMask

The semantic for each bit is:
BIT 1 : Disable Trellis
BIT 2 : Disable Reed-Solomon
BIT 3 : Disable upstream bitswap
BIT 4 : Disable downstream bitswap
BIT 5 : Disable 1-bit constellation
BIT 6 : Disable transmit windowi…

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.5

adslLineConfPowerMgmt

Enable/disable power management for the port.

Enumerationr/w

Enumerated Values:

1	enableL2
2	enableL2andL3
3	disable

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.6

adslLineConfPowerMode

The power mode of the ADSL line.

Enumerationr/w

Enumerated Values:

1	fix
2	priorityToPower
3	priorityToRate

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.7

adslLineConfAturMaxTxPower

The maximum allowed transmit power of ATU-R.

tenth dBmInteger32r/w

Constraints:
range: -130-200

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.8

adslLineConfAtucMaxTxPower

The maximum allowed transmit power of ATU-C.

tenth dBmInteger32r/w

Constraints:
range: -50-200

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.9

adslLineConfMaxRxPower

The maximum aggregate received power.

tenth dBmInteger32r/w

Constraints:
range: -255-255

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.10

adslLineConfAturCarrierMask

The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31;
CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
Bit set to 1 indicates the bin is masked off.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.11

adslLineConfAtucCarrierMask0

The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255;
CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255.
Bit set to 1 indicates the bin is masked off.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.12

adslLineConfAtucCarrierMask1

The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
the bin is masked off.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.13

adslLineConfAturInp

The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4,
but for BCM solution, user can set value from 1 ~ 7.

Enumerationr/w

Enumerated Values:

1	zero
2	zero_point_five
3	one
4	two
5	four
6	eight
7	sixteen

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.14

adslLineConfAtucInp

The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4,
but for BCM solution, user can set value from 1 ~ 7.

Enumerationr/w

Enumerated Values:

1	zero
2	zero_point_five
3	one
4	two
5	four
6	eight
7	sixteen

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.15

adslLineConfL0Time

Set the minimum time in seconds that the ADSL line
must stay in L0 power mode before changing to the L2 power mode.
For CTLM solution, the range is 120 ~ 65535;
for BCM solution, the range is 10 ~ 65535.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.16

adslLineConfL2Time

Set minimum time in seconds that the ADSL line must stay in the
L2 power mode before reducing the power again in the L2 power mode.
For CTLM solution, the range is 60 ~ 65535;
for BCM solution, the range is 10 ~ 65535.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.17

adslLineConfL2ATPR

Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission power
while it is in the L2 power mode. …

dBInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.18

adslLineConfL2ATPRT

the maximum Aggregate Transmit Power Reduction Total (ATPRT)
in decibels (dB) that is permitted in the L2 power mode.
This is the total transmit power decrease that is allowed
to occur in the L2 power mode.
For CTLM sol…

dBInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.19

adslLineConfMaxL2Rate

configured maximum L2 rate.
(32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)

kbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.20

adslLineConfMinL2Rate

configured minimum L2 rate.
(32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)

kbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.21

adslLineConfL0toL2Rate

configured transition L0 to L2 rate.
(<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)

kbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.1.1.22

adslLineStatusTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.2.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk adslLineStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::adslLineStatusTable'

This table includes the ADSL line status.

adslLineStatusEntry row .1.3.6.1.4.1.890.1.5.11.11.8.2.4.1

An entry in adslLineStatusTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

adslLineStatusMode

The link up mode of the ADSL line.

Enumeration

Enumerated Values:

1	gDotLite
2	gDotDmt
3	t1Dot413
4	etsi
5	adsl2
6	adsl2Plus
7	none

.1.3.6.1.4.1.890.1.5.11.11.8.2.4.1.1

adslLineUpTime

The link up time of the ADSL line, in unit of seconds

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.2.4.1.2

powerMgmtParamTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.2.5 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk powerMgmtParamTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::powerMgmtParamTable'

This table defines L0 to L2 power transition parameters.

powerMgmtParamEntry row .1.3.6.1.4.1.890.1.5.11.11.8.2.5.1

An entry in powerMgmtParamTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
powerMgmtL0Time The object specifies the minimum time in L0 mode before L2 mode may be entered.	secondInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.1`
powerMgmtL2Time The object specifies the minimum time in L2 mode before trimming and in between power trims.	secondInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.2`
powerMgmtL2Atpr The maximum Aggregate Transmit Power Reduction.	dBInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.3`
powerMgmtL2Atprt The maximum Aggregate Transmit Power Reduction Total.	dBInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.4`
powerMgmtL2MinRate The object specifies the minimum L2 rate.	KbpsInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.5`
powerMgmtL2MaxRate The object specifies the maximum L2 rate.	KbpsInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.6`
powerMgmtL2ThreshRate The object specifies the rate threshold that triggers the line entering L0 or L2 mode.	KbpsInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.5.1.7`

powerMgmtPSDTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.2.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk powerMgmtPSDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::powerMgmtPSDTable'

This table provides the PSD setting for both ATU-C and ATU-R.

powerMgmtPSDEntry row .1.3.6.1.4.1.890.1.5.11.11.8.2.6.1

An entry in powerMgmtPSDTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
powerMgmtAtucMaxPSD The object specifies the maximum ATU-C PSD.	0.1dBm/HzInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.6.1.1`
powerMgmtAturMaxPSD The object specifies the maximum ATU-R PSD.	0.1dBm/HzInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.8.2.6.1.2`

pvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.4.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::pvcTable'

This table includes PVC configuration.

pvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.4.2.1

An entry in pvcTable.

Indexes

RFC1213-MIBifIndex pvcVpi pvcVci pvcPvid

Column Syntax OID

pvcVpi

VPI of the pvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.1

pvcVci

VCI of the pvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.2

pvcPvid

Default VID of the pvc.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.3

pvcPriority

802.1p default priority of the pvc.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.5

pvcProfileDS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in DS side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.6

pvcRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.7

pvcProfileUS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in US side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.4.2.1.8

pvcUsRateLimitTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.4.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pvcUsRateLimitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::pvcUsRateLimitTable'

This table defines the upstream rate limit for each PVC.

pvcUsRateLimitEntry row .1.3.6.1.4.1.890.1.5.11.11.8.4.4.1

An entry in pvcUsRateLimitTable.

Indexes

RFC1213-MIBifIndex pvcVpi pvcVci

Column Syntax OID

pvcUsRateLimitEnable

Enable/disable upstream rate limit for a PVC.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.8.4.4.1.1

pvcUsRateLimit

Upstream rate limit in Kbps for a PVC.

KbpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.4.4.1.2

ppvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.5.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ppvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ppvcTable'

This table includes priority PVC configuration.

ppvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.5.2.1

An entry in ppvcTable.

Indexes

RFC1213-MIBifIndex ppvcVpi ppvcVci ppvcPvid

Column Syntax OID

ppvcVpi

VPI of the ppvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.1

ppvcVci

VCI of the ppvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.2

ppvcPvid

Default VID of the ppvc.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.3

ppvcEncap

Encapsulation of the ppvc.

Enumerationr/w

Enumerated Values:

1	llc
2	vc

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.4

ppvcPriority

802.1p default priority of the ppvc.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.5

ppvcRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.5.2.1.6

ppvcMemberTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.5.4 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ppvcMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ppvcMemberTable'

This table includes priority PVC member configuration.

ppvcMemberEntry row .1.3.6.1.4.1.890.1.5.11.11.8.5.4.1

An entry in ppvcMemberTable.

Indexes

RFC1213-MIBifIndex ppvcVpi ppvcVci ppvcMemberVpi ppvcMemberVci ppvcMemberPriority

Column Syntax OID

ppvcMemberVpi

VPI of the member ppvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.1

ppvcMemberVci

VCI of the member ppvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.2

ppvcMemberPriority

802.1p default priority of the member ppvc.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.3

ppvcMemberProfileDS

The profile of the member ppvc in DS side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.4

ppvcMemberRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.5

ppvcMemberProfileUS

The profile of the member ppvc in US side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.5.4.1.6

rpvcGatewayTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rpvcGatewayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::rpvcGatewayTable'

This table includes Routed Gateway configuration.

rpvcGatewayEntry row .1.3.6.1.4.1.890.1.5.11.11.8.8.1.1

An entry in Routed Gateway table.

Indexes

rpvcGatewayIp

Column Syntax OID

rpvcGatewayIp

IP of RPVC gateway.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.1.1.1

rpvcGatewayVlanId

Vlan id send to this RPVC gateway.

Q-BRIDGE-MIBVlanIndexr/w

.1.3.6.1.4.1.890.1.5.11.11.8.8.1.1.2

rpvcGatewayRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.8.1.1.3

rpvcGatewayPriority

802.1p p bit send to this RPVC gateway.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.8.1.1.4

rpvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.8.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rpvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::rpvcTable'

This table includes RPVC configuration.

rpvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.8.2.1

An entry in rpvcTable.

Indexes

RFC1213-MIBifIndex rpvcVpi rpvcVci rpvcIp rpvcNetmask

Column Syntax OID

rpvcVpi

VPI of the rpvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.1

rpvcVci

VCI of the rpvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.2

rpvcDSProfile

The down stream profile of the rpvc.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.3

rpvcUSProfile

The up stream profile of the rpvc.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.4

rpvcIp

The IP of the rpvc.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.5

rpvcNetmask

The IP mask of the rpvc IP.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.6

rpvcGatewayIpAddress

The gateway IP of rpvc.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.7

rpvcRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.8.2.1.8

rpvcRouteDomainTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.8.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rpvcRouteDomainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::rpvcRouteDomainTable'

This table includes RPVC route domain configuration.

rpvcRouteDomainEntry row .1.3.6.1.4.1.890.1.5.11.11.8.8.3.1

An entry in rpvcRouteDomainTable.

Indexes

RFC1213-MIBifIndex rpvcRouteDomainVpi rpvcRouteDomainVci rpvcRouteDomainIp rpvcRouteDomainNetmask

Column Syntax OID

rpvcRouteDomainVpi

VPI of the rpvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.8.3.1.1

rpvcRouteDomainVci

VCI of the rpvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.8.3.1.2

rpvcRouteDomainIp

The route domain IP.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.3.1.3

rpvcRouteDomainNetmask

The IP mask of the route domain IP.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.8.3.1.4

rpvcRouteDomainRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.8.3.1.5

dsBcastDisableTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.9 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dsBcastDisableTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dsBcastDisableTable'

This table includes Down Stream Bcast configuration.

dsBcastDisableEntry row .1.3.6.1.4.1.890.1.5.11.11.8.9.1

An entry in Down Stream Bcast table.

Indexes

RFC1213-MIBifIndex dsBcastDisableVlanId

Column Syntax OID

dsBcastDisableVlanId

downstream broadcast disabled vid.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.9.1.1

dsBcastDisableRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.9.1.2

paepvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.10.1 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk paepvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::paepvcTable'

This table includes PPPoAoE PVC configuration.

paepvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.10.1.1

An entry of paepvcTable.

Indexes

RFC1213-MIBifIndex paepvcVpi paepvcVci paepvcPvid

Column Syntax OID

paepvcVpi

VPI of the pvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.1

paepvcVci

VCI of the pvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.2

paepvcPvid

Default VID of the pvc.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.3

paepvcPriority

802.1p default priority of the pvc.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.5

paepvcProfileDS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in DS side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.6

paepvcAcName

Access concentrator name.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.7

paepvcServiceName

Service name.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.8

paepvcHelloTime

The system will close the PVC if there are not any LCP echo messages passed through
during the LCP hello time.

secondInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.9

paepvcRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.10

paepvcProfileUS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in US side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.10.1.1.11

tlspvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.11.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tlspvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::tlspvcTable'

This table includes Transparent LAN Service (TLS) PVC configuration.

tlspvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.11.1.1

An entry of tlspvcTable.

Indexes

RFC1213-MIBifIndex tlspvcVpi tlspvcVci tlspvcSvid

Column Syntax OID

tlspvcVpi

VPI of the pvc.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.1

tlspvcVci

VCI of the pvc.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.2

tlspvcSvid

s-tag VLAN ID of the pvc.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.3

tlspvcSpriority

s-tag priority of the pvc.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.5

tlspvcProfileDS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in DS side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.6

tlspvcRowStatus

This object is used to create a new row or delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.7

tlspvcProfileUS

The value of this object identifies the row in the atmProfileTable,
which applies for this pvc in US side.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.11.11.8.11.1.1.8

ipbpvcDomainTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcDomainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcDomainTable'

This table includes ipbpvc domain configuration.
This table is supported by R3.00 and later versions.

ipbpvcDomainEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.1.1

An entry of ipbpvcDomainTable.

Indexes

ipbpvcDomainName

Column Syntax OID

ipbpvcDomainName

Name of the domain.

OctetString

.1.3.6.1.4.1.890.1.5.11.11.8.12.1.1.1

ipbpvcDomainRowStatus

Row status of the table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.12.1.1.2

ipbpvcDomainVlanTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcDomainVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcDomainVlanTable'

This table includes ipbpvc domain VLAN configuration.
This table is supported by R3.00 and later versions.

ipbpvcDomainVlanEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.2.1

An entry of ipbpvcDomainVlanTable.

Indexes

ipbpvcDomainName ipbpvcDomainVlanId

Column Syntax OID

ipbpvcDomainVlanId

Set VLAN to join or leave the specified domain.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.12.2.1.1

ipbpvcDomainDhcpVlanEnable

Enable/disable DHCP VLAN in a domain.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.8.12.2.1.2

ipbpvcDomainVlanRowStatus

Row status of the table used to create/delete an entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.12.2.1.3

ipbpvcEdgeRouterTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcEdgeRouterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcEdgeRouterTable'

This table includes ipbpvc edge router configuration.
This table is supported by R3.00 and later versions.

ipbpvcEdgeRouterEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.3.1

An entry of ipbpvcEdgeRouterTable.

Indexes

ipbpvcDomainName ipbpvcEdgeRouterIp ipbpvcEdgeRouterMask ipbpvcEdgeRouterVid

Column Syntax OID

ipbpvcEdgeRouterIp

IP address of the edge router.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.12.3.1.1

ipbpvcEdgeRouterVid

VLAN ID of the edge router.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.12.3.1.2

ipbpvcEdgeRouterMask

Netmask of the edge router.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.3.1.3

ipbpvcEdgeRouterRowStatus

Row status of the table used to create/delete an entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.12.3.1.4

ipbpvcInterfaceTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcInterfaceTable'

This table includes ipbpvc interface configuration.
This table is supported by R3.00 and later versions.

ipbpvcInterfaceEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.4.1

An entry of ipbpvcInterfaceTable.

Indexes

ipbpvcDomainName ipbpvcInterfaceIp ipbpvcInterfaceMask ipbpvcInterfaceVid

Column Syntax OID

ipbpvcInterfaceIp

IP address of the interface.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.1

ipbpvcInterfaceMask

Netmask of the interface.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.2

ipbpvcInterfaceVid

VLAN ID of the interface.

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.3

ipbpvcInterfaceIfIndex

IfIndex of the interface.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.4

ipbpvcInterfaceVpi

VPI of the interface.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.5

ipbpvcInterfaceVci

VCI of the interface.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.6

ipbpvcInterfaceRowStatus

Row status of the table used to create/delete an entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.12.4.1.7

ipbpvcRouteTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.5 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcRouteTable'

This table includes ipbpvc route configuration.
This table is supported by R3.00 and later versions.

ipbpvcRouteEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.5.1

An entry of ipbpvcRouteTable.

Indexes

ipbpvcDomainName ipbpvcRouteIp ipbpvcRouteMask ipbpvcRouteNextHop

Column Syntax OID

ipbpvcRouteIp

IP address of the route.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.1

ipbpvcRouteMask

Netmask of the route.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.2

ipbpvcRouteNextHop

Next hop IP address of the route.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.3

ipbpvcRouteMetric

Metric of the route.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.4

ipbpvcRoutePriority

Priority of the route. Note that the default value of this object is 8, which means
we keep the original priority of the packet(frame).

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.5

ipbpvcRouteRowStatus

Row status of the table used to create/delete an entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.12.5.1.6

ipbpvcTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.12.6 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcTable'

This table includes ipbpvc configuration.
This table is supported by R3.00 and later versions.

ipbpvcEntry row .1.3.6.1.4.1.890.1.5.11.11.8.12.6.1

An entry of ipbpvcTable.

Indexes

RFC1213-MIBifIndex ipbpvcVpi ipbpvcVci ipbpvcPvid

Column Syntax OID

ipbpvcVpi

VPI of the PVC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.1

ipbpvcVci

VCI of the PVC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.2

ipbpvcPvid

PVID of the PVC.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.3

ipbpvcEncap

Type of the PVC.

Enumerationr/w

Enumerated Values:

1	ipoe
2	reserved
3	ipoa

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.4

ipbpvcPriority

Priority of the PVC.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.5

ipbpvcProfile

Profile of the PVC.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.6

ipbpvcRowStatus

Row status of the table used to create/delete an entry.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.7

ipbpvcProfileUS

US Profile of the PVC.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.12.6.1.8

gbondGroupTable

table

.1.3.6.1.4.1.890.1.5.11.11.8.51.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gbondGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::gbondGroupTable'

A table containing the G.Bond configuration information for
each bonding group of the device.

gbondGroupEntry row .1.3.6.1.4.1.890.1.5.11.11.8.51.1.1

An entry of gbondTable.

Indexes

gbondGroupName

Column Syntax OID

gbondGroupName

An administratively assigned string, which may be used to identify bonding group.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.11.11.8.51.1.1.1

gbondGroupPorts

The set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5~11:each octet specifies a set of eight p…

OctetStringr/w

.1.3.6.1.4.1.890.1.5.11.11.8.51.1.1.2

gbondGroupUpRate

The UP stream rate.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.11.11.8.51.1.1.4

gbondGroupDownRate

The DOWN stream rate.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.11.11.8.51.1.1.5

gbondGroupRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.8.51.1.1.6

dscpMappingTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.10.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dscpMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dscpMappingTable'

The table contains DSCP mapping configuration for the adsl and ethernet ports.

dscpMappingEntry row .1.3.6.1.4.1.890.1.5.11.11.10.10.1.1

An entry of dscpMappingTable.

Indexes

dscpSrcCodePoint

Column	Syntax	OID
dscpSrcCodePoint The DSCP source code point used for mapping.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.10.10.1.1.1`
dscpMapPriority The mapping p bits that will replace the source p bits in the incoming packet.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.890.1.5.11.11.10.10.1.1.3`

dscpPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.10.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dscpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dscpPortTable'

The table contains DSCP mapping configuration for the adsl and ethernet ports.

dscpPortEntry row .1.3.6.1.4.1.890.1.5.11.11.10.10.2.1

An entry of dscpPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

dscpStatusEnable

The DSCP port status.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.10.2.1.1

vlanIsolationTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.12.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanIsolationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::vlanIsolationTable'

A table contains configuration of isolated VLAN.

vlanIsolationEntry row .1.3.6.1.4.1.890.1.5.11.11.10.12.1.1

An entry of vlanIsolationTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column Syntax OID

vlanIsolationRowStatus

Row status of the table used to create/delete an entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.12.1.1.1

dhcpRelay82Table

table

.1.3.6.1.4.1.890.1.5.11.11.10.51.2 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelay82Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dhcpRelay82Table'

A table that contains DHCP Relay configuration.

dhcpRelay82Entry row .1.3.6.1.4.1.890.1.5.11.11.10.51.2.1

The entry of DHCP Relay table.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column Syntax OID

dhcpRelay82PrimaryServer

The IP address of the DHCP Relay primary server.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.1

dhcpRelay82SecondaryServer

The IP address of the DHCP Relay secondary server.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.2

dhcpRelay82ActiveServer

The current active DHCP Relay server.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.3

dhcpRelay82Enable

Enable/disable DHCP relay and Option82 function.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.4

dhcpRelay82Info

User specific Option82 information.

OctetStringr/w

Constraints:
range: 0-23

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.5

dhcpRelay82RelayMode

DHCP relay mode.

Enumerationr/w

Enumerated Values:

1	auto
2	both

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.6

dhcpRelay82Suboption2Enable

Enable/disable Option 82 sub-option 2.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.8

dhcpRelay82Suboption2Info

User specified information for Option 82 sub-option 2.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.9

dhcpRelay82EntryEnable

Enable/disable DHCP Relay

Enumerationr/w

Enumerated Values:

1	auto
2	both
3	disable

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.10

dhcpRelay82EntryOptionMode

Option82 format.

Enumerationr/w

Enumerated Values:

1	private
2	tr101

.1.3.6.1.4.1.890.1.5.11.11.10.51.2.1.11

macFilterPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.53.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macFilterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::macFilterPortTable'

This table includes the status of mac filtering for each port.

macFilterPortEntry row .1.3.6.1.4.1.890.1.5.11.11.10.53.1.1

An entry in macFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

macFilterPortEnable

Enable/disable MAC filtering for the port.

Enumerationr/w

Enumerated Values:

1	enableMacFilter
2	enableMacCount
4	disable
5	enableMacFilterAndMacCount

.1.3.6.1.4.1.890.1.5.11.11.10.53.1.1.1

macFilterPortMacCount

The total number of MAC addresses allowed for the port.

Integer32r/w

Constraints:
range: 1-128

.1.3.6.1.4.1.890.1.5.11.11.10.53.1.1.2

macFilterPortFilterMode

The mac filter mode (accept or deny) for the port.

Enumerationr/w

Enumerated Values:

1	accept
2	deny

.1.3.6.1.4.1.890.1.5.11.11.10.53.1.1.3

macFilterTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.53.5 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::macFilterTable'

A table that contains the mac filter addresses.

macFilterEntry row .1.3.6.1.4.1.890.1.5.11.11.10.53.5.1

The entry of macFilterTable.

Indexes

RFC1213-MIBifIndex macFilterAddr

Column Syntax OID

macFilterAddr

The mac address which can pass through or be rejected from the port.

RFC1213-MIBPhysAddress

.1.3.6.1.4.1.890.1.5.11.11.10.53.5.1.1

macFilterRowStatus

The row status of the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.53.5.1.2

ouiFilterTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.53.7 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ouiFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ouiFilterTable'

A table that contains the OUI filter addresses.

ouiFilterEntry row .1.3.6.1.4.1.890.1.5.11.11.10.53.7.1

The entry of ouiFilterTable.

Indexes

RFC1213-MIBifIndex ouiFilterAddr

Column Syntax OID

ouiFilterAddr

The first three bytes of the mac address which can pass through or be rejected from the port.

OctetString

.1.3.6.1.4.1.890.1.5.11.11.10.53.7.1.1

ouiFilterRowStatus

The row status of the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.53.7.1.2

ouiFilterPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.53.9 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ouiFilterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ouiFilterPortTable'

This table includes the status of oui filtering for each port.

ouiFilterPortEntry row .1.3.6.1.4.1.890.1.5.11.11.10.53.9.1

An entry in macFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

ouiFilterPortEnable

Enable/disable oui filtering for the port.

Enumerationr/w

Enumerated Values:

1	enableOuiFilter
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.53.9.1.1

ouiFilterPortFilterMode

The oui filter mode (accept or deny) for the port.

Enumerationr/w

Enumerated Values:

1	accept
2	deny

.1.3.6.1.4.1.890.1.5.11.11.10.53.9.1.2

dhcpSnoopPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.55.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dhcpSnoopPortTable'

This table includes DHCP snooping enable/disable for each port.

dhcpSnoopPortEntry row .1.3.6.1.4.1.890.1.5.11.11.10.55.1.1

An entry of dhcpSnoopPortTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

dhcpSnoopEnable

Enable/disable DHCP snooping for a port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.55.1.1.1

dhcpStaticTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.55.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dhcpStaticTable'

This table defines DHCP static IP addresses.

dhcpStaticEntry row .1.3.6.1.4.1.890.1.5.11.11.10.55.4.1

An entry of dhcpStaticTable.

Indexes

RFC1213-MIBifIndex dhcpStaticIpAddr

Column Syntax OID

dhcpStaticIpAddr

The IP address which can pass through the port.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.10.55.4.1.1

dhcpStaticRowStatus

Row status of the table entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.55.4.1.2

aclSetTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.56.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::aclSetTable'

aclsetTable.

aclSetEntry row .1.3.6.1.4.1.890.1.5.11.11.10.56.1.1

An entry of aclSetTable.

Indexes

RFC1213-MIBifIndex aclSetVpi aclSetVci aclSetProfileName

Column Syntax OID

aclSetVpi

VPI value

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.10.56.1.1.1

aclSetVci

VCI value

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.10.56.1.1.2

aclSetProfileName

ACL Profile name

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.10.56.1.1.3

aclSetRowStatus

RowStatus of aclSetEntry

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.56.1.1.4

aclProfileTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.56.2 · 1 row entry · 24 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::aclProfileTable'

aclProfileTable.

aclProfileEntry row .1.3.6.1.4.1.890.1.5.11.11.10.56.2.1

An entry of aclProfileTable.

Indexes

aclProfileRuleName

Column Syntax OID

aclProfileRuleName

Profile rule name

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.1

aclProfileRuleNumber

The managed object is for acl profile rule configuration.
etype <etype> vlan <vid> (1),
etype <etype> smac <mac> (2),
etype <etype> dmac <mac> (3),
vlan <vid> smac <mac> (4),
vlan <vid> dmac <mac> (5),
smac <mac> dmac <…

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.2

aclProfileActionNumber

Profile action number.
Bit 1: rate
Bit 2: rvlan
Bit 3: rpri
Bit 4: deny
Bit 1, Bit 2 & Bit 3 can multiple selection.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.3

aclProfileRuleParamMask

Profile rule parameter mask.
BIT 1: srcip <ip>/<mask>
BIT 2: dstip <ip>/<mask>
BIT 3: tos <stos> <etos>
BIT 4: srcport <sport> <eport>
BIT 5: dstport <sport> <eport>

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.4

aclProfileRuleEtype

Profile rule etype

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.5

aclProfileRuleVid

Profile rule vid

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.6

aclProfileRuleSmac

Profile rule source MAC

RFC1213-MIBPhysAddressr/w

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.7

aclProfileRuleDmac

Profile rule destination MAC

RFC1213-MIBPhysAddressr/w

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.8

aclProfileRulePriority

Profile rule priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.9

aclProfileRuleProtocol

Profile rule protocol.
icmp(1),igmp(2),ip(4),tcp(6),
udp(17),gre(47),ospf(89),
other ptype

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.10

aclProfileRuleSrcIP

Profile rule source IP

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.11

aclProfileRuleSrcIPMask

The subnet mask of source IP mask

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.12

aclProfileRuleDestIP

Profile rule source IP

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.13

aclProfileRuleDestIPMask

The subnet mask of dest IP mask

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.14

aclProfileRuleStartTos

Profile rule start type of service

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.15

aclProfileRuleEndTos

Profile rule end type of service

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.16

aclProfileRuleSrcStartPort

Profile rule source start port

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.17

aclProfileRuleSrcEndPort

Profile rule source end port

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.18

aclProfileRuleDestStartPort

Profile rule destination start port

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.19

aclProfileRuleDestEndPort

Profile rule destination end port

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.20

aclProfileActionRate

Profile action to replace to this rate

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.21

aclProfileActionrvlan

Profile action to replace to this vlan

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.22

aclProfileActionrpri

Profile action to replace to this priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.23

aclProfileRowStatus

The row status of the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.56.2.1.24

pppoeAgentTable

table

.1.3.6.1.4.1.890.1.5.11.11.10.57.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeAgentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::pppoeAgentTable'

A table that contains PPPoE DHCP Relay configuration.

pppoeAgentEntry row .1.3.6.1.4.1.890.1.5.11.11.10.57.1.1

An entry of pppoeAgentTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column Syntax OID

pppoeAgentEnable

Enable/disable DHCP relay and Option82 function.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.10.57.1.1.1

pppoeAgentInfo

User specific Option82 information.

OctetStringr/w

Constraints:
range: 0-23

.1.3.6.1.4.1.890.1.5.11.11.10.57.1.1.2

pppoeAgentRowStatus

Row status of the table entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.10.57.1.1.3

pppoeAgentOptionMode

Option82 format.

Enumerationr/w

Enumerated Values:

1	private
2	tr101

.1.3.6.1.4.1.890.1.5.11.11.10.57.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.11.11.11.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::securedClientTable'

A table that contains information about secured clients.

securedClientEntry row .1.3.6.1.4.1.890.1.5.11.11.11.5.2.1

A list of secured client entry.

Indexes

securedClientIndex

Column Syntax OID

securedClientIndex

The index of the entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.11.5.2.1.1

securedClientStartIp

The starting IP address of the secured client set.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.11.5.2.1.2

securedClientEndIp

The ending IP address of the secured client set.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.11.5.2.1.3

securedClientService

Each bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions are:
BIT 1: telnet
BIT 2: ftp
BIT 3: web
BIT 4: icmp
BIT 5: ssh
BIT 6:…

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.11.5.2.1.4

securedClientEnable

Enable/disable the entry.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.11.11.11.5.2.1.5

extAlarmTable

table

.1.3.6.1.4.1.890.1.5.11.11.11.8.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk extAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::extAlarmTable'

A table that contains external alarm information.

extAlarmEntry row .1.3.6.1.4.1.890.1.5.11.11.11.8.1.1

The entry of external alarm table.

Indexes

extAlarmIndex

Column	Syntax	OID
extAlarmIndex The index of the entry.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.11.8.1.1.1`
extAlarmname The external alarm name.	OctetStringr/w Constraints: `range: 1-31`	`.1.3.6.1.4.1.890.1.5.11.11.11.8.1.1.2`
extAlarmstatus Dispaly 'Normal' or 'Alarm' string	OctetString Constraints: `range: 1-31`	`.1.3.6.1.4.1.890.1.5.11.11.11.8.1.1.3`

userTable

table

.1.3.6.1.4.1.890.1.5.11.11.11.9.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk userTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::userTable'

A table that contains user information.

userEntry row .1.3.6.1.4.1.890.1.5.11.11.11.9.5.1

An entry of userTable.

Indexes

userName

Column Syntax OID

userName

The user name.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.11.9.5.1.1

userPassword

The user password.

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.890.1.5.11.11.11.9.5.1.2

userPriviledge

The user priviledge to decide what operation the user can and cannot do.

Enumerationr/w

Enumerated Values:

1	high
2	middle
3	low

.1.3.6.1.4.1.890.1.5.11.11.11.9.5.1.3

userRowStatus

The row status used to create or delete a user.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.11.11.11.9.5.1.4

igmpGroupTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpGroupTable'

This table includes igmp group information.

igmpGroupEntry row .1.3.6.1.4.1.890.1.5.11.11.13.5.1

An entry in igmpGroupTable.

Indexes

igmpGroupIp

Column	Syntax	OID
igmpGroupIp igmp group IP	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.5.1.1`
igmpGroupvid vlan id	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.5.1.2`
igmpGroupnumberOfMembers number Of Members	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.5.1.3`
igmpGroupMemberPorts Group Member Ports	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.11.11.13.5.1.4`

igmpGroupPortTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpGroupPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpGroupPortTable'

This table includes igmp Group port information.

igmpGroupPortEntry row .1.3.6.1.4.1.890.1.5.11.11.13.6.1

An entry in igmpGroupPortTable.

Indexes

RFC1213-MIBifIndex igmpGroupPortIp igmpGroupPortvid

Column	Syntax	OID
igmpGroupPortIp Igmp Group IP	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.6.1.1`
igmpGroupPortvid Igmp Group vid	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.6.1.2`

igmpGroupV2Table

table

.1.3.6.1.4.1.890.1.5.11.11.13.7 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpGroupV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpGroupV2Table'

A table that displays IGMP learned group member information.

igmpGroupV2Entry row .1.3.6.1.4.1.890.1.5.11.11.13.7.1

An entry of igmpGroupV2Table.

Indexes

igmpGroupV2Vid igmpGroupV2Ip

Column	Syntax	OID
igmpGroupV2Vid The IGMP group VLAN ID.	Q-BRIDGE-MIBVlanIndex	`.1.3.6.1.4.1.890.1.5.11.11.13.7.1.1`
igmpGroupV2Ip The multicast IP address.	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.7.1.2`
igmpGroupV2NumOfMembers The number of member ports in the group.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.7.1.3`
igmpGroupV2MemberPorts The member port list of the group.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.11.11.13.7.1.4`

igmpGroupPortV2Table

table

.1.3.6.1.4.1.890.1.5.11.11.13.8 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpGroupPortV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpGroupPortV2Table'

A table that displays IGMP joined groups in this port.

igmpGroupPortV2Entry row .1.3.6.1.4.1.890.1.5.11.11.13.8.1

An entry of igmpGroupPortV2Table.

Indexes

RFC1213-MIBifIndex igmpGroupPortV2Vid igmpGroupPortV2Ip igmpGroupPortV2SourceIp

Column	Syntax	OID
igmpGroupPortV2Vid The IGMP group VLAN ID.	Q-BRIDGE-MIBVlanIndex	`.1.3.6.1.4.1.890.1.5.11.11.13.8.1.1`
igmpGroupPortV2Ip The multicast IP address.	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.8.1.2`
igmpGroupPortV2SourceIp The source IP address that joins the IGMP group.	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.8.1.3`

igmpPortCtrlPduTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.9 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpPortCtrlPduTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::igmpPortCtrlPduTable'

A table that displays IGMP related counter values in this port.

igmpPortCtrlPduEntry row .1.3.6.1.4.1.890.1.5.11.11.13.9.1

An entry of igmpPortCtrlPduTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
igmpPortCtrlPduQueryCnt The total number of IGMP query messages received in this port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.9.1.1`
igmpPortCtrlPduReportCnt The total number of IGMP report messages received in this port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.9.1.2`
igmpPortCtrlPduLeaveCnt The total number of IGMP leave messages received in this port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.9.1.3`
igmpPortNumOfActiveGroups The total number of active IGMP groups in this port.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.9.1.4`

dhcpSnoopIpTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.11.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dhcpSnoopIpTable'

This table shows the IP addresses and netmasks offered by the DHCP server.

dhcpSnoopIpEntry row .1.3.6.1.4.1.890.1.5.11.11.13.11.1.1

An entry of dhcpSnoopIpTable.

Indexes

RFC1213-MIBifIndex dhcpSnoopIp

Column	Syntax	OID
dhcpSnoopIp The snooped IP address.	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.1.1.1`
dhcpSnoopMac The snooped MAC address.	RFC1213-MIBPhysAddress	`.1.3.6.1.4.1.890.1.5.11.11.13.11.1.1.2`
dhcpSnoopVid The snooped VLAN ID.	Q-BRIDGE-MIBVlanIndex	`.1.3.6.1.4.1.890.1.5.11.11.13.11.1.1.3`

dhcpSnoopCounterTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.11.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::dhcpSnoopCounterTable'

This table shows the DHCP statistics.

dhcpSnoopCounterEntry row .1.3.6.1.4.1.890.1.5.11.11.13.11.2.1

An entry of dhcpSnoopCounterTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dhcpDiscovery The total number of received DHCP server discovery packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.2.1.1`
dhcpOffer The total number of received DHCP server offer packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.2.1.2`
dhcpRequest The total number of received DHCP IP request packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.2.1.3`
dhcpAck The total number of received DHCP IP acknowledge packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.2.1.4`
dhcpAckBySnoopFull The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.11.11.13.11.2.1.5`

paepvcSessionTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.12.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk paepvcSessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::paepvcSessionTable'

This table shows the paepvc session statistics.

paepvcSessionEntry row .1.3.6.1.4.1.890.1.5.11.11.13.12.1.1

An entry of paepvcSessionTable.

Indexes

RFC1213-MIBifIndex paepvcSessionVpi paepvcSessionVci

Column Syntax OID

paepvcSessionVpi

The PAEPVC VPI.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.1

paepvcSessionVci

The PAEPVC VCI.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.2

paepvcSessionState

The PAEPVC status.

Enumeration

Enumerated Values:

1	down
2	pppoe
3	ppp
4	up

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.3

paepvcSessionId

The PAEPVC session ID.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.4

paepvcSessionUptime

The PAEPVC session uptime.

secondSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.5

paepvcSessionacname

Access concentrator name.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.6

paepvcSessionsrvcname

Service name.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.890.1.5.11.11.13.12.1.1.7

paepvcCountTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.12.2 · 1 row entry · 15 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk paepvcCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::paepvcCountTable'

This table shows the paepvc counters.

paepvcCountEntry row .1.3.6.1.4.1.890.1.5.11.11.13.12.2.1

An entry of paepvcCountTable.

Indexes

RFC1213-MIBifIndex paepvcCountVpi paepvcCountVci

Column	Syntax	OID
paepvcCountVpi The PAEPVC VPI.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.1`
paepvcCountVci The PAEPVC VCI.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.2`
paepvcCountPppLcpCfgReqRx The number of ppp lcp config-request received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.3`
paepvcCountPppLcpEchoReqRx The number of ppp lcp echo-request received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.4`
paepvcCountPppLcpEchoReplyRx The number of ppp lcp echo-reply received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.5`
paepvcCountPadiTx The number of pppoe padi transfered	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.6`
paepvcCountPadoRx The number of pppoe pado received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.7`
paepvcCountPadrTx The number of pppoe padr transfered	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.8`
paepvcCountPadsRx The number of pppoe pads received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.9`
paepvcCountPadtTx The number of pppoe padt transfered	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.10`
paepvcCountPadtRx The number of pppoe padt received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.11`
paepvcCountSrvcnameErrRx The number of pppoe service name error received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.12`
paepvcCountAcSystemErrRx The number of pppoe access concentrator name error received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.13`
paepvcCountGenericErrTx The number of pppoe generic error transfered	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.14`
paepvcCountGenericErrRx The number of pppoe generic error received	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.11.11.13.12.2.1.15`

macTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.13.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::macTable'

A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame.

macEntry row .1.3.6.1.4.1.890.1.5.11.11.13.13.2.1

An entry of macTable.

Indexes

macAddress

Column Syntax OID

macAddress

A unicast MAC address for which the bridge has
forwarding and/or filtering information.

.1.3.6.1.4.1.890.1.5.11.11.13.13.2.1.1

macPort

The port from which the mac address has been learned.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.13.2.1.2

macStatus

The status of this entry.

Enumeration

Enumerated Values:

1	other
2	invalid
3	learned
4	self
5	mgmt

.1.3.6.1.4.1.890.1.5.11.11.13.13.2.1.3

arpproxyTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.14.1 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpproxyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::arpproxyTable'

Display ARP table. This table is supported by R3.00 and later versions.

arpproxyEntry row .1.3.6.1.4.1.890.1.5.11.11.13.14.1.1

An entry of arpproxyTable.

Indexes

ipbpvcDomainName arpproxyIp

Column Syntax OID

arpproxyIp

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.1

arpproxyMac

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.2

arpproxyIfIndex

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.3

arpproxyVpi

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.4

arpproxyVci

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.5

arpproxyInterfaceIp

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.6

arpproxyInterfaceMask

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.7

arpproxyInterfaceVid

Q-BRIDGE-MIBVlanIndex

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.8

arpproxyDhcpIp

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.9

arpproxyType

Enumeration

Enumerated Values:

1	upstream
2	downstream

.1.3.6.1.4.1.890.1.5.11.11.13.14.1.1.10

ipbpvcIfDynamicTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.14.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcIfDynamicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcIfDynamicTable'

Display runtime interfaces. This table is supported by R3.00 and later versions.

ipbpvcIfDynamicEntry row .1.3.6.1.4.1.890.1.5.11.11.13.14.2.1

An entry of ipbpvcIfDynamicTable.

Indexes

ipbpvcDomainName ipbpvcIfDynamicIp ipbpvcIfDynamicMask ipbpvcDomainVlanId

Column	Syntax	OID
ipbpvcIfDynamicIp	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.11.11.13.14.2.1.1`
ipbpvcIfDynamicMask	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.14.2.1.2`
ipbpvcIfDynamicIfIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.14.2.1.3`
ipbpvcIfDynamicVpi	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.14.2.1.4`
ipbpvcIfDynamicVci	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.11.11.13.14.2.1.5`

ipbpvcRouteDynamicTable

table

.1.3.6.1.4.1.890.1.5.11.11.13.14.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipbpvcRouteDynamicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAM1212' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAM1212::ipbpvcRouteDynamicTable'

Display runtime routing table. This table is supported by R3.00 and later versions.

ipbpvcRouteDynamicEntry row .1.3.6.1.4.1.890.1.5.11.11.13.14.3.1

An entry of ipbpvcRouteDynamicTable.

Indexes

ipbpvcDomainName ipbpvcRouteDynamicType ipbpvcRouteDynamicIp ipbpvcRouteDynamicMask

Column Syntax OID

ipbpvcRouteDynamicType

Enumeration

Enumerated Values:

1	upstream
2	downstream

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.1

ipbpvcRouteDynamicIp

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.2

ipbpvcRouteDynamicMask

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.3

ipbpvcRouteDynamicNextHop

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.4

ipbpvcRouteDynamicMetric

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.5

ipbpvcRouteDynamicPriority

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.11.11.13.14.3.1.6