ZXR10-VoIP Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
142

voipDialpeerTable

table
.1.3.6.1.4.1.3902.3.200.1.1.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipDialpeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipDialpeerTable' 
Configure voipDialpeer parameters,
such as signals's voipDialpeerNumber...
voipDialpeerEntry row .1.3.6.1.4.1.3902.3.200.1.1.1.1.1
Each row INDEX by voipDialpeerNumber
And contain imformation of Dialpeer.
Indexes
Column Syntax OID
voipDialpeerNumber
Configure voip Dialpeer number.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.1
voipDialpeerType
Configure voip Dialpeer type.
VoIPDialpeerTypeType
Type Values:
1pots
2voip
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.2
voipDialpeerState
Configure voip Dialpeer state.
VoIPDialpeerStateTyper/w
Type Values:
0up
1shutdown
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.3
voipDialpeerCorrespondingPhoneNumber
Configure voip Dialpeer phcodestring.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.4
voipDialpeerPotsPortName
Configure voip Pots Dialpeer port name.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.5
voipDialpeerPotsIfDigitStrip
Configure voip Pots Dialpeer if allow to digit strip.
VoIPPotsDialpeerIfDigitStripTyper/w
Type Values:
0cancel-truncate
1no
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.6
voipDialpeerPotsPrefix
Configure voip Pots Dialpeer prefix.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.7
voipDialpeerPotsCalleridClassNo
Configure zxr10 voip Dialpeer Pots Callerid ClassNo.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.8
voipDialpeerVoipVoiceClassNo
Configure zxr10 VoIP Dialpeer Voip VoiceClassNo.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.11
voipDialpeerVoipTargetType
Configure zxr10 VoIP Dialpeer Voip Target Type.
Enumerationr/w
Enumerated Values:
1ipv4
3ras
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.12
voipDialpeerVoipPeerAddr
Configure zxr10 VoIP Dialpeer Voip Peer Addr.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.13
voipDialpeerVoipIpPrecedence
Configure voip Voip Dialpeer ip packet precdence.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.14
voipDialpeerFaxClassNo
Configure zxr10 VoIP Dialpeer Fax Class No.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.15
voipDialpeerRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.1.1.1.16

voipFaxTable

table
.1.3.6.1.4.1.3902.3.200.1.1.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipFaxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipFaxTable' 
Configure voip Voice parameters,
such as signals's voipDialpeerFaxIfEcm...
voipFaxEntry row .1.3.6.1.4.1.3902.3.200.1.1.2.1.1
Each row INDEX by voipFaxNo
And contain imformation of VoIP Fax.
Indexes
Column Syntax OID
voipFaxClassNo
Configure zxr10 VoIP Fax No.
Unsigned32
Constraints:
range: 1-256
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.1
voipFaxIfEcm
Configure voip If Ecm.
Enumerationr/w
Enumerated Values:
0ecm
1noecm
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.2
voipFaxRate
Configure voip Rate.
Enumerationr/w
Enumerated Values:
0noSpeedLimit
1rate2400
2rate4800
3rate7200
4rate9600
5rate12000
6rate14400
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.3
voipFaxProtocolType
Configure voip Type.
Enumerationr/w
Enumerated Values:
0t38
1passthrough
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.4
voipFaxRecoveryMethod
Configure zxr10 VoIP Fax Recovery Method.
Enumerationr/w
Enumerated Values:
0redundancy
1fec
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.5
voipFaxLossPacketHandle
Configure zxr10 VoIP Fax Loss Packet Handle Method.
Enumerationr/w
Enumerated Values:
0conceal
1blanket
2lastGoogLine
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.6
voipFaxEnergyLevel
Configure zxr10 VoIP Fax Energy Level.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.7
voipFaxLsRedundancy
Configure voip Is Redundancy.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.9
voipFaxHsRedundancy
Configure voip Hs Redundancy.
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.10
voipFaxRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.2.1.1.11

voipVoiceTable

table
.1.3.6.1.4.1.3902.3.200.1.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipVoiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipVoiceTable' 
Configure voip Voice parameters,
such as signals's voipVoiceClassNo...
voipVoiceEntry row .1.3.6.1.4.1.3902.3.200.1.1.3.1.1
Each row INDEX by voipVoiceClassNo
And contain imformation of VoIPVoice.
Indexes
Column Syntax OID
voipVoiceClassNo
Configure voip Voice Class No.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.3.1.1.1
voipVoiceH323ClassNo
Configure voip Voice H323 Class No.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.3.1.1.2
voipVoiceCodecClassNo
Configure voip Voice Codec Class No.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.3.1.1.3
voipVoiceRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.3.1.1.4

voipH323Table

table
.1.3.6.1.4.1.3902.3.200.1.1.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipH323Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipH323Table' 
Configure voip Voice parameters,
such as signals's voipH323ClassNo...
voipH323Entry row .1.3.6.1.4.1.3902.3.200.1.1.4.1.1
Each row INDEX by voipVoiceClassNo
And contain imformation of voipH323.
Indexes
Column Syntax OID
voipH323ClassNo
Configure voip H323 Class No.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.1
voipH323IfFastcon
Configure voip H323 If Fastcon.
H323IfFastconTyper/w
Type Values:
0slow
1fast-connect
 .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.2
voipH323H225TimeoutSetup
Configure voip H323 H225 Timeout Setup.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.5
voipH323H225TimeoutTcpCallIdle
Configure voip H323 H225 Timeout Tcp Call idle.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.6
voipH323H225TimeoutTcpEstablish
Configure voip H323 H225 Timeout Tcp Establish.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.7
voipH323RowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.4.1.1.8

voipCodecTable

table
.1.3.6.1.4.1.3902.3.200.1.1.5.1 · 1 row entry · 9 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipCodecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipCodecTable' 
Configure voip  Codec parameters,
such as signals's voipCodecNo...
voipCodecEntry row .1.3.6.1.4.1.3902.3.200.1.1.5.1.1
Each row INDEX by voipCodecClassNo
And contain imformation of voipCodec.
Indexes
Column Syntax OID
voipCodecClassNo
Configure voip Codec Class No.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.1
voipCodecClass1stPriLevel
Configure Codec Class 1st Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.2
voipCodecClass2ndPriLevel
Configure Codec Class 2nd Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.3
voipCodecClass3rdPriLevel
Configure Codec Class 3rd Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.4
voipCodecClass4thPriLevel
Configure Codec Class 4th Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.5
voipCodecClass5thPriLevel
Configure Codec Class 5th Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.6
voipCodecClass6thPriLevel
Configure Codec Class 6th Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.7
voipCodecClass7thPriLevel
Configure Codec Class 7th Priority Level.
CodecTyper/w
Type Values:
0g711A
1g711A-56k
2g711U
3g711U-56k
4g722
5g722-56k
6g722-48k
7g723
8g728
9g729
10g729A
11g729wB
12g729AwB
13clear-channel
14transparent
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.8
voipCodecRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.5.1.1.9

voipServiceGwTechPrefixTable

table
.1.3.6.1.4.1.3902.3.200.1.1.6.33 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipServiceGwTechPrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipServiceGwTechPrefixTable' 
Configure voipServiceGwTechPrefix parameters,
such as voipPhcodestring...
voipServiceGwTechPrefixEntry row .1.3.6.1.4.1.3902.3.200.1.1.6.33.1
Each row INDEX by voipServiceGwIndex

And contain imformation of VoIPServiceGwTechPrefix.
Indexes
Column Syntax OID
voipServiceGwIndex
Configure zxr10 VoIP Service Gw Index.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.6.33.1.1
voipServiceGwTechPrefix
Configure voip Service Gw Prefix.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.6.33.1.2
voipServiceGwTechPrefixRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.6.33.1.3

voipServiceGkTable

table
.1.3.6.1.4.1.3902.3.200.1.1.6.34 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipServiceGkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipServiceGkTable' 
Configure VoIP Service Gk parameters,
such as voipServiceGkName...
voipServiceGkEntry row .1.3.6.1.4.1.3902.3.200.1.1.6.34.1
Each row INDEX by voipServiceGkIndex
And contain imformation of VoIP Service Gk.
Indexes
Column Syntax OID
voipServiceGkIndex
Configure zxr10 VoIP Service GkIndex.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.1
voipServiceGkName
Configure voip Service Gk Name.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.2
voipServiceGkAddr
Configure voip Service Gk Addr.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.3
voipServiceGkPort
Configure voip Service Gk Port.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.4
voipServiceGkIfMulitcast
Configure voip Service If Mulitcast.
Enumerationr/w
Enumerated Values:
0normal
1multicast
 .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.5
voipServiceGkPriority
Configure voip Service Priority.
UINT8r/w .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.6
voipServiceGkRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.6.34.1.7

voipE1VIParaTable

table
.1.3.6.1.4.1.3902.3.200.1.1.7.1 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipE1VIParaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipE1VIParaTable' 
Configure E1VIPara parameters,such as interface frame format...
voipE1VIParaEntry row .1.3.6.1.4.1.3902.3.200.1.1.7.1.1
Each row INDEX by ifIndex which import from
FROM RFC1213-MIB.
And contain imformation of E1VIPara.
Indexes
Column Syntax OID
voipE1VIParaClockSource
SET clock source pick-up mode.
VoIPE1ClockSourceTyper/w
Type Values:
1line
2internal
 .1.3.6.1.4.1.3902.3.200.1.1.7.1.1.1
voipE1VIParaFrame
Set interface frame format.
VoIPE1FramingTyper/w
Type Values:
1crc4
2nocrc4
 .1.3.6.1.4.1.3902.3.200.1.1.7.1.1.2
voipE1VIParaLinecode
Set interface line coding format.
VoIPE1LinecodeHdb3Typer/w
Type Values:
1ami
2hdb3
 .1.3.6.1.4.1.3902.3.200.1.1.7.1.1.3
voipE1VIParaState
This object founcation is to shutdown E1VIPara voiceport.
VoIPE1ShutDownTyper/w
Type Values:
0shutdown
1up
 .1.3.6.1.4.1.3902.3.200.1.1.7.1.1.4
voipE1VIIfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.7.1.1.5

voipR2Table

table
.1.3.6.1.4.1.3902.3.200.1.1.7.2 · 1 row entry · 16 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipR2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipR2Table' 
Configure R2 parameters,such as signals's timeouts...
voipR2Entry row .1.3.6.1.4.1.3902.3.200.1.1.7.2.1
Each row INDEX by ifIndex which import from
FROM RFC1213-MIB.
And contain imformation of R2.
Indexes
Column Syntax OID
voipR2CallerDigitsNumber
Configure the required number of collected number
before asking for main numbers or identifier.
Unsigned32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.1
voipR2CountryName
Configure the default R2 sign
parameters distinguish of country name.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.2
voipR2InvertABCD
Configure line signal reverse mode.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.3
voipR2Ka
Configure KA signal coding.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.4
voipR2Kb
Configure KB signal coding.
Unsigned32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.5
voipR2Kd
Configure KD signal coding.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.6
voipR2SeizureAckTime
Configure voip R2 Seizure Ack Time.
Unsigned32r/w
Constraints:
range: 2-100
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.7
voipR2DebounceTime
Configure voip R2 Debounce Time Number.
Unsigned32r/w
Constraints:
range: 10-40
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.8
voipR2UnusedABCD
Configure voip R2 Unused ABCD.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.9
voipR2TimeoutsKb
Configure voip R2 Timeouts of Kb.
Unsigned32r/w
Constraints:
range: 1000-50000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.10
voipR2TimeoutsKd
Configure voip R2 Timeouts of Kd.
Unsigned32r/w
Constraints:
range: 1000-50000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.11
voipR2TimeoutsNextnum
Configure voip R2 Timeouts of Nextnum.
Unsigned32r/w
Constraints:
range: 1000-50000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.12
voipR2TimeoutsRinging
Configure voip R2 Timeouts of Ringing.
Unsigned32r/w
Constraints:
range: 1000-240000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.13
voipR2TimeoutsSendsaw
Configure voip R2 Timeouts of Sendsaw.
Unsigned32r/w
Constraints:
range: 50-1000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.14
voipR2TimeoutsReleaseguard
Configure voip R2 Timeouts of Releaseg.
Unsigned32r/w
Constraints:
range: 200-3000
 .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.15
r2IfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.7.2.1.16

voipR2TimeslotTable

table
.1.3.6.1.4.1.3902.3.200.1.1.7.3 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipR2TimeslotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipR2TimeslotTable' 
Configure R2 Slot Table,such as signals's TrunkDirection...
voipR2TimeslotEntry row .1.3.6.1.4.1.3902.3.200.1.1.7.3.1
Each row INDEX by ifIndex and voipR2Slots.
ifIndex which import from
FROM RFC1213-MIB.
And contain imformation of R2 slot.
Indexes
Column Syntax OID
voipR2Timeslots
Configure zxr10 VoIP R2 Timeslots.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.1
voipR2TimeslotStatus
Configure zxr10 VoIP R2 Timeslot Status.
Enumeration
Enumerated Values:
0idle
1busy
2block
 .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.2
voipR2TimeslotTrunkDirection
Configure voip R2 trunk direction.such as in,out,dual.
VoIPR2TrunkDirectionTyper/w
Type Values:
1dual
2in
3out
 .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.3
voipR2TimeslotAction
Configure voip R2 ts action such as block,open,query,reset.
VoIPR2TsActionTyper/w
Type Values:
0block
1open
3reset
 .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.4
voipR2TimeslotRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.5
voipR2TimeslotIfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.7.3.1.6

voipVoiceportTable

table
.1.3.6.1.4.1.3902.3.200.1.1.8.1 · 1 row entry · 20 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipVoiceportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipVoiceportTable' 
Configure voip Voiceport parameters,such as voipDtmfThreshold...
voipVoiceportEntry row .1.3.6.1.4.1.3902.3.200.1.1.8.1.1
Each row INDEX by ifIndex which import from
FROM RFC1213-MIB.
And contain imformation of voipVoiceport.
Indexes
Column Syntax OID
voipVoiceportState
Configure zxr10 VoIP Voiceport State,ex:up--down.
Enumerationr/w
Enumerated Values:
0shutdown
1up
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.1
voipVoiceportPortDesc
Configure zxr10 VoIP Voiceport PortDesc.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.2
voipVoiceportIfComfortNoise
Configure zxr10 VoIP Voiceport PortDesc.
Enumerationr/w
Enumerated Values:
0no
1comfort-noise
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.3
voipVoiceportIfVad
Configure zxr10 VoIP Voiceport PortDesc.
Enumerationr/w
Enumerated Values:
0no
1vad
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.4
voipVoiceportIfEchoCancel
Configure voip Echo Cancel Enable .
Enumerationr/w
Enumerated Values:
0no
1echo-cancel
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.5
voipVoiceportEchoCoverage
Configure voip Echo Cancel Coverage .
UINT8r/w .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.6
voipVoiceportIfDtmfRelay
Configure voip BlIs Dtmf Relay Use H245.
Enumerationr/w
Enumerated Values:
0no
1dtmf-relay
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.7
voipVoiceportDtmfThreshold
Configure voip Dtmf Threshold .
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.8
voipVoiceportInGain
Configure voip Input Gain .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.9
voipVoiceportOutAtten
Configure voip Output Gain .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.10
voipVoiceportDialNumInterval
Configure zxr10 VoIP Voiceport DialNum Interval .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.11
voipVoiceportTmoutCallDisconnect
Configure zxr10 VoIP Voiceport Tmout Call disconnect .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.12
voipVoiceportTmoutInitial
Configure zxr10 VoIP Voiceport Tmout Call Init .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.13
voipVoiceportTmoutCallDead
Configure zxr10 VoIP Voiceport Tmout Call Dead .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.14
voipVoiceportTmoutRinging
Configure zxr10 voip Voiceport Tmout Ringing .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.15
voipVoiceportRingNumber
Configure voip Ring Number.
Unsigned32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.16
voipVoiceportMfcThreshold
Configure voip Mfc Threshold.
Unsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.17
voipVoiceportTrunkDirection
Configure zxr10 VoIP Voiceport Trunk Direction.
Enumerationr/w
Enumerated Values:
0in
1out
2dual
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.18
voipVoiceportDisplayFunction
Configure zxr10 VoIP Voiceport Display Function.
Enumerationr/w
Enumerated Values:
0display
1undisplay
 .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.19
voipVoiceportIfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.8.1.1.20

voipVoiceportRestrictNumberTable

table
.1.3.6.1.4.1.3902.3.200.1.1.8.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipVoiceportRestrictNumberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipVoiceportRestrictNumberTable' 
Configure zxr10 VoIP Voiceport Restrict Number...
voipVoiceportRestrictNumberEntry row .1.3.6.1.4.1.3902.3.200.1.1.8.2.1
Each row INDEX by ifIndex which import from
FROM RFC1213-MIB.
And contain imformation of RestrictNumber.
Indexes
Column Syntax OID
voipVoiceportRestrictNumIndex
SET zxr10 VoIP Voiceport RestrictNum Index.
UINT8 .1.3.6.1.4.1.3902.3.200.1.1.8.2.1.1
voipVoiceportRestrictNumber
Configure zxr10 VoIP Voiceport Restrict Number.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.8.2.1.2
voipVoiceportRestrictNumRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.8.2.1.3
voipVoiceportRestrictNumIfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.8.2.1.4

voipPhoneNumExpTable

table
.1.3.6.1.4.1.3902.3.200.1.1.10.1 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipPhoneNumExpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipPhoneNumExpTable' 
Configure zxr10 VoIP PhoneNumExp Number parameters,
such as voipPhoneNumExpNumber...
voipPhoneNumExpEntry row .1.3.6.1.4.1.3902.3.200.1.1.10.1.1
Each row INDEX by voipPhoneNumExpIndex
And contain imformation of voipPhoneNumExpNumber.
Indexes
Column Syntax OID
voipPhoneNumExpIndex
Configure zxr10 VoIP PhoneNumExp Index.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.10.1.1.1
voipPhoneNumExpNumber
Configure voip PhoneNumExpNumber.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.10.1.1.2
voipPhoneNumExpAbbreviateNumber
Configure zxr10 VoIP PhoneNumExp Number Abbreviate.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.10.1.1.3
voipPhoneNumExpRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.10.1.1.4

voipNewServiceTable

table
.1.3.6.1.4.1.3902.3.200.1.1.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipNewServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipNewServiceTable' 
Configure voip new Service Table,such as signals's voipnewServiceCode...
voipNewServiceEntry row .1.3.6.1.4.1.3902.3.200.1.1.11.1.1
Each row INDEX by voipNewServiceIndex.
And contain imformation of voip newService.
Indexes
Column Syntax OID
voipNewServiceIndex
Configure zxr10 VoIP NewService Index .
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.11.1.1.1
voipNewServiceCode
Configure voip new Service Code.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.11.1.1.2
voipNewServiceType
Configure voip new Service Type.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.11.1.1.3
voipNewServiceGport
Configure voip new Service Type.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.11.1.1.4
voipNewServiceRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.11.1.1.5

voipShowCallHistoryTable

table
.1.3.6.1.4.1.3902.3.200.1.1.12.1 · 1 row entry · 10 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipShowCallHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipShowCallHistoryTable' 
Show Call History parameters,such as voipShowCallHistorySlot...
voipShowCallHistoryEntry row .1.3.6.1.4.1.3902.3.200.1.1.12.1.1
Each row INDEX by ifIndex and voipSlot,
ifIndex which import from from RFC1213-MIB.
And contain imformation of R2.
Indexes
Column Syntax OID
voipShowCallHistorySlot
Show zxr10 VoIP Show Call History Slot.
UINT8 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.1
voipShowCallHistoryCallingCount
Show voip Calling Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.2
voipShowCallHistoryCallingSuccessCount
Show voip Calling Success Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.3
voipShowCallHistoryCalledCount
Show voip Called Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.4
voipShowCallHistoryCalledSuccessCount
Show voip Called Success Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.5
voipShowCallHistoryCalledCode
Show zxr10 VoIP Show Call History Called Code.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.6
voipShowCallHistoryClearCount
Configure VoIP Show Call History Clear Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.7
voipShowCallHistoryLastClearTime
Configure zxr10 VoIP Show Call History Last Clear Time.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.8
voipShowCallHistoryClear
Configure voip Calling Statistics Clear flag.
VoIPCallingStatisticsClearTyper/w
Type Values:
0no
1clear
 .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.9
voipShowCallHistoryIfName
Show interface name.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.12.1.1.10

voipShowCallHistoryPhoneCodeTable

table
.1.3.6.1.4.1.3902.3.200.1.1.12.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipShowCallHistoryPhoneCodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipShowCallHistoryPhoneCodeTable' 
Show Call History parameters,such as voipShowCallHistoryPhoneCode...
voipShowCallHistoryPhoneCodeEntry row .1.3.6.1.4.1.3902.3.200.1.1.12.2.1
Each row INDEX by ifIndex and voipShowCallHistoryPhoneCode,
ifIndex which import from from RFC1213-MIB.
And contain imformation of R2.
Indexes
Column Syntax OID
voipShowCallHistoryPhoneCode
Show zxr10 VoIP Show Call History Phone Code.
DisplayString .1.3.6.1.4.1.3902.3.200.1.1.12.2.1.1
voipShowCallHistoryPhoneCodeCount
Show zxr10 VoIP Show Call History Phone Code Count.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.12.2.1.2

voipCalleridClassTable

table
.1.3.6.1.4.1.3902.3.200.1.1.15.1 · 1 row entry · 12 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipCalleridClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipCalleridClassTable' 
Configure voip Callerid Class parameters,
such as voipRuleNo...
voipCalleridClassEntry row .1.3.6.1.4.1.3902.3.200.1.1.15.1.1
Each row INDEX by voipRuleNo
And contain imformation of voipCalleridClassTable.
Indexes
Column Syntax OID
voipRuleNo
Configure voip Rule No.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.1
voipCalleridNo1
Configure voip Callerid No.1.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.2
voipCalleridNo2
Configure voip Callerid No.2.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.3
voipCalleridNo3
Configure voip Callerid No.3 .
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.4
voipCalleridNo4
Configure voip Callerid No.4.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.5
voipCalleridNo5
Configure voip Callerid No.5.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.6
voipCalleridNo6
Configure voip Callerid No.6.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.7
voipCalleridNo7
Configure voip Callerid No.7.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.8
voipCalleridNo8
Configure voip Callerid No.8.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.9
voipCalleridNo9
Configure voip Callerid No.9.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.10
voipCalleridNo10
Configure voip Callerid No.10.
UINT32r/w .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.11
voipCalleridClassRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.15.1.1.12

voipPhoneNumRuleTable

table
.1.3.6.1.4.1.3902.3.200.1.1.15.2 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk voipPhoneNumRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-VoIP' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-VoIP::voipPhoneNumRuleTable' 
Configure voip Phone NumRule parameters,
such as voipPhoneNumRuleNo...
voipPhoneNumRuleEntry row .1.3.6.1.4.1.3902.3.200.1.1.15.2.1
Each row INDEX by voipPhoneNumRuleNo
And contain imformation of voipPhoneNumRuleTable.
Indexes
Column Syntax OID
voipPhoneNumRuleNo
Configure voip Phone Num Rule No.
UINT32 .1.3.6.1.4.1.3902.3.200.1.1.15.2.1.1
voipCallerPrefix
Configure zxr10 voIP Caller Prefix.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.15.2.1.2
voipCalleePrefix
Configure zxr10 voIP Prefix.
DisplayStringr/w .1.3.6.1.4.1.3902.3.200.1.1.15.2.1.3
voipTruncateLen
Configure zxr10 voIPtruncate Len.
UINT8r/w .1.3.6.1.4.1.3902.3.200.1.1.15.2.1.4
voipPhoneNumRuleRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.200.1.1.15.2.1.5