ZXPW-ENET-STD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
8
zxPwEnetTable
table
.1.3.6.1.4.1.3902.1015.1013.23.1.1
·
1 row entry
·
8 columns
Uses the zte variant from
Command help
/opt/observium/mibs/zte.
Walk zxPwEnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXPW-ENET-STD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXPW-ENET-STD-MIB::zxPwEnetTable'
This table contains the index to the Ethernet tables associated with this ETH PW, the VLAN configuration and VLAN mode.
This table is indexed by the same index that was created
for the associated entry in the PW generic table in the
PW-STD-MIB module.
The zxPwIndex and the zxPwEnetPwInstance are used as indexes
to allow mult…
for the associated entry in the PW generic table in the
PW-STD-MIB module.
The zxPwIndex and the zxPwEnetPwInstance are used as indexes
to allow mult…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
If multiple rows are mapped to the same PW, this index is
used to uniquely identify the individual row. If the value of the VLAN field is known at the time of of row creation, the value of zxPwEnetPwVlan MAY be used for… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.1 |
||||||||||||
|
This Object defines the (service delimiting) VLAN field
value on the PW. The value of 4095 MUST be used if the object is not applicable, for example when mapping all packets from an Ethernet port to this PW (raw mode). … |
VlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.2 |
||||||||||||
|
This object indicates the mode of VLAN handling between the
port or the virtual port associated with the PW and the PW encapsulation. - 'other' indicates an operation that is not defined by this MIB modu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.3 |
||||||||||||
|
This object defines if the mapping between the original port
(physical port or VPLS virtual port) to the PW is VLAN based or not. In case of VLAN mapping, this object indicates the the VLAN value on the original port. … |
VlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.4 |
||||||||||||
|
This object is used to specify the ifIndex of the Ethernet
port associated with this PW for point-to-point Ethernet service, or the ifIndex of the virtual interface of the VPLS instance associated with the PW if the ser… |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.5 |
||||||||||||
|
If the PW is modeled as an ifIndex in the ifTable, this
object indicates the value of the ifIndex representing the Ethernet PW on the PSN side in the Etherlike-MIB. Note that this value may be different from the value o… |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.6 |
||||||||||||
|
This object enables creating, deleting and modifying this row.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.7 |
||||||||||||
|
This object indicates the storage type of this row.
|
SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … |
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.8 |
