The LOID conflict trap that is generated when unauthorized ONU
reports an LOID that has been binded by other registered ONU.
The first ifIndex indicates the PON port of unauthorized ONU.
The zxAnEponTrapMac indicates the MAC of unauthorized ONU.
zxAnEponOnuIfIndex indicates the authorized ONU whih the
same LOID.
zxAnEponTrapEventRemoteOnuConfigureFail
.1.3.6.1.4.1.3902.1015.1010.1.10.3.10
zxAnEponTrapEventTransparent
.1.3.6.1.4.1.3902.1015.1010.1.10.3.11
zxAnEponTrapEventOnuDyingGasp
.1.3.6.1.4.1.3902.1015.1010.1.10.3.12
zxAnEponTrapEventOnuAutoConfigRequest
.1.3.6.1.4.1.3902.1015.1010.1.10.3.13
zxAnEponTrapEventOnuIpNotAutoConfig
.1.3.6.1.4.1.3902.1015.1010.1.10.3.14
zxAnEponTrapEventOnuPowerOff
.1.3.6.1.4.1.3902.1015.1010.1.10.3.15
zxAnEponTrapEventOnuPowerOffRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.3.16
zxAnEponTrapEventOnuUnauthenticate
.1.3.6.1.4.1.3902.1015.1010.1.10.3.17
zxAnEponTrapEventOnuConstantOptical
.1.3.6.1.4.1.3902.1015.1010.1.10.3.18
zxAnEponTrapEventOnuConstantOpticalRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.3.19
zxAnEponTrapEventOltReset
.1.3.6.1.4.1.3902.1015.1010.1.10.3.2
zxAnEponTrapEventPonResetFailed
.1.3.6.1.4.1.3902.1015.1010.1.10.3.20
it indicate OLT PON MAC reset failed
zxAnEponOnuSpeedTypeMismatchTrap
.1.3.6.1.4.1.3902.1015.1010.1.10.3.21
EPON ONU actual speed type and config speed type mismatch.
zxAnEponTrapEventOnuOffline
.1.3.6.1.4.1.3902.1015.1010.1.10.3.3
zxAnEponTrapEventOnuOnline
.1.3.6.1.4.1.3902.1015.1010.1.10.3.4
zxAnEponTrapEventExtendedOamDiscoveryFail
.1.3.6.1.4.1.3902.1015.1010.1.10.3.5
zxAnEponTrapEventLocalOnuConfigureFail
.1.3.6.1.4.1.3902.1015.1010.1.10.3.6
zxAnEponTrapEventUnkownOnuOffline
.1.3.6.1.4.1.3902.1015.1010.1.10.3.7
zxAnEponTrapEventDenyUnkownOnuRegister
.1.3.6.1.4.1.3902.1015.1010.1.10.3.8
zxAnEponTrapEventUnkownOnuOnline
.1.3.6.1.4.1.3902.1015.1010.1.10.3.9
zxAnEponOnuOamV21Message
.1.3.6.1.4.1.3902.1015.1010.1.10.4.1.101
CTC ONU OAM Message v2.1
zxAnEponOnuEquipmentAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.1
A functional failure on an internal interface
zxAnEponOnuButteryVoltLowRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.10
zxAnEponOnuPhysicalIntrusionAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.11
Applies if the ONU is supported with detection such as door or box open
zxAnEponOnuPhysicalIntrusionRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.12
zxAnEponOnuSelfTestFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.13
ONU Self-Test Failure
zxAnEponOnuSelfTestFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.14
zxAnEponOnuTempHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.15
ONU Temperature over Threshold
zxAnEponOnuTempHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.16
zxAnEponOnuTempLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.17
ONU Temperature over Threshold
zxAnEponOnuTempLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.18
zxAnEponOnuIADConnectionFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.19
Failure of Connection between inner IAD and SS platform, such as Lose of SS, no keep alive packets, etc
A zxAnEponOnuPowerSwitchAlm trap is sent when the ONU power
has been switched to standby power.
zxAnEponOnuPowerAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.3
ONU Power Alarm
zxAnEponOnuPowerSwitchRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.30
A zxAnEponOnuPowerSwitchRestore trap is sent when the ONU power
has been switched to AC mains power.
zxAnEponOnuPowerRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.4
zxAnEponOnuButteryMissingAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.5
ONU Battery is provisioned but missing
zxAnEponOnuButteryMissingRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.6
zxAnEponOnuButteryFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.7
ONU Battery is provisioned and present but cannot recharge
zxAnEponOnuButteryFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.8
zxAnEponOnuButteryVoltLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.2.9
ONU Battery is provisioned and present but its voltage is too low
zxAnEponOnuPonRxPowerHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.1
ONU RX Optical Power over Threshold
zxAnEponOnuPonTxBiasHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.10
zxAnEponOnuPonTxBiasLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.11
ONU Bias Current Lower Than Threshold
zxAnEponOnuPonTxBiasLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.12
zxAnEponPonOnuVccHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.13
ONU Supply Voltage over Threshold
zxAnEponPonOnuVccHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.14
zxAnEponPonOnuVccLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.15
ONU Supply Voltage Lower Than Threshold
zxAnEponPonOnuVccLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.16
zxAnEponOnuPonTempHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.17
zxAnEponOnuPonTempHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.18
zxAnEponOnuPonTempLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.19
zxAnEponOnuPonRxPowerHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.2
zxAnEponOnuPonTempLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.20
zxAnEponOnuPonRxPowerLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.3
ONU RX Optical Power Lower Than Threshold
zxAnEponOnuPonRxPowerLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.4
zxAnEponOnuPonTxPowerHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.5
ONU TX Optical Power over Threshold
zxAnEponOnuPonTxPowerHighAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.6
zxAnEponOnuPonTxPowerLowAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.7
ONU RX Optical Power Lower Than Threshold
zxAnEponOnuPonTxPowerLowAlmRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.8
zxAnEponOnuPonTxBiasHighAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.3.9
ONU Bias Current over Threshold
zxAnEponOnuCardAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.4.1
A functional failure on an user interface card
zxAnEponOnuCardRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.4.2
zxAnEponOnuCardTestFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.4.3
ONU card self-test failure
zxAnEponOnuCardTestFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.4.4
zxAnEponOnuEthAutoNegFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.1
ONU Ethernet Port Auto-negotiation Failure
zxAnEponOnuEthCongestionRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.10
zxAnEponOnuPOTSFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.11
ONU POTS Port Failure
zxAnEponOnuPOTSFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.12
zxAnEponOnuE1FailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.13
ONU E1 Port Failure
zxAnEponOnuE1FailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.14
zxAnEponOnuE1TimingLockAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.15
ONU E1 Timing Unlock
zxAnEponOnuE1TimingLockRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.16
zxAnEponOnuE1LosAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.17
ONU E1 Port LOS(Loss of Signal)
zxAnEponOnuE1LosRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.18
zxAnEponOnuEthAutoNegFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.2
zxAnEponOnuEthLOSAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.3
ONU Ethernet Port LOS(Loss of Signal)
zxAnEponOnuEthLOSRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.4
zxAnEponOnuEthFailureAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.5
ONU Ethernet port failure
zxAnEponOnuEthFailureRestore
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.6
zxAnEponOnuEthLoopbackAlm
.1.3.6.1.4.1.3902.1015.1010.1.10.4.5.7
This trap will be sent to managemet system when ONU Ethernet
port loopback was happened .
The format of zxAnEponOnuOamAlarmInfo as following:
'1' means inner loopback
'2' means outer loopback .