ZXCESCARDPROP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
5

zxCesCardPropTable

table
.1.3.6.1.4.1.3902.1015.1013.3.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxCesCardPropTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXCESCARDPROP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXCESCARDPROP-MIB::zxCesCardPropTable' 
The global parameters configuration table.
zxCesCardPropEntry row .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1
An entry in the global parameters Configuration table.
Indexes
Column Syntax OID
zxCesCardIndex
The 4 bytes index includes:
interface type(bit31~28);shelfId(bit27~24);slotId(bit23~16);portId(bit15~bit8);reserved(bit7~bit0)
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1.1
zxCesCardPhysAddress
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet str…
RFC1213-MIBPhysAddressr/w .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1.2
zxCesCardAddrType
Denotes the address type of the local node.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1.3
zxCesCardAddress
This object contains the value of the local node address. This object
SHOULD contain a value of all zeroes if not applicable
(zxCesCardAddrType is 'unknown').
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1.4
zxCesCardCfgInfoSend
The action to send the configuration on
global parameters to corresponding card.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.1013.3.1.1.1.1.5