ZTE-AN-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
29
Rows
29
Columns
129

zxAnVlanTable

table
.1.3.6.1.4.1.3902.1015.20.2 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTable' 
A table containing VLAN information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
zxAnVlanEntry row .1.3.6.1.4.1.3902.1015.20.2.1
Filtering information configured into the bridge by
management, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded. It is forb…
Indexes
Column Syntax OID
zxAnVlanId
The VlanId to which
this entry's filtering information applies.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.2.1.1
zxAnVlanName
DURABLE: { 'Default' }
An administratively assigned string, which may be used
to identify the VLAN.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.3902.1015.20.2.1.2
zxAnVlanTransparent
The transparent mode of the vlan enable or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.2.1.3
zxAnVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.2.1.4
zxAnVlanXconnect
The xconnect mode of the vlan enable or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.2.1.5
zxAnVlanDesc
The description of VLAN.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.1015.20.2.1.6

zxAnVlanPortTable

table
.1.3.6.1.4.1.3902.1015.20.3 · 1 row entry · 12 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanPortTable' 
A table containing VLAN Port information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
zxAnVlanPortEntry row .1.3.6.1.4.1.3902.1015.20.3.1
Filtering information configured into the bridge by
management, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded.
Indexes
Column Syntax OID
zxAnVlanPortIndex
An index for a bridge port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.3.1.1
zxAnVlanIfConfMode
the access mode of the port.
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
4transparent
 .1.3.6.1.4.1.3902.1015.20.3.1.2
zxAnVlanIfConfTlsEnable
The Transparent LAN Service enable or disable.
When port in access mode, TLS always disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.3.1.3
zxAnVlanIfConfTlsSVid
the TLS vlan ID of the port.
Only TLS enable, TLS Vlan ID can be configured.
Default value(0).
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.3.1.4
zxAnVlanIfConfDefaultVid
the pvid of the port.
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.3.1.5
zxAnVlanIfConfDefaultCVid
the cpvid of the port.
Default value(0).
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.3.1.6
zxAnVlanIfConfUntaggedVlanList
The Untagged vlan sequence to a Port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.20.3.1.7
zxAnVlanIfConfTaggedVlanList
The Tagged vlan sequence to a Port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.20.3.1.8
zxAnVlanIfConfTpid
This object indicates the Outer VLAN TPID of this port,value define
uses hex. default vlan 0x8100
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.3.1.9
zxAnVlanIfIngressFilterEnable
When this is enable(1) the port will reject incoming
frames for VLAN only if the port belongs to that vlan. When this is
disable(2), the port will accept all incoming frames,regardless of
the port's vlan membership.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.3.1.10
zxAnVlanIfAcceptableFrameTypes
When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be acc…
Enumerationr/w
Enumerated Values:
1admitAll
2admitOnlyVlanTagged
3admitOnlyVlanUntagged
4admitOnlyVlanSingleTagged
5admitOnlyVlanMaxDoubleTagged
6admitOnlyVlanMaxSingleTagged
7admitOnlyVlanDoubleTagged
 .1.3.6.1.4.1.3902.1015.20.3.1.11
zxAnVlanIfConfTpidEnable
Enable or disable zxAnVlanIfConfTpid.

enable(1) -- Apply the out VLAN TPID with zxAnVlanIfConfTpid.
disable(2) -- Apply the out VLAN TPID with zxAnVlanConfTpid in the
zxAnVlanConfTpidTable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.3.1.12

zxAnVlanIfConfVlanCmdTable

table
.1.3.6.1.4.1.3902.1015.20.4 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanIfConfVlanCmdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfConfVlanCmdTable' 
Operation command table for bridge port configuration like
Vlan list.
A single object such as pkg and channel will be added or removed 
to/from
PkgIdList/ChanIdList through this table.
zxAnVlanIfConfVlanCmdEntry row .1.3.6.1.4.1.3902.1015.20.4.1
A list of entries of zxAnVlanIfConfVlanCmdTable.
Indexes
Column Syntax OID
zxAnVlanIfConfVlanCmd
The command to operate Vlan list of zxAnVlanPortConfTable.
Each command is related to each meaming of
zxAnVlanPortConfVlanObjName.
Enumerationr/w
Enumerated Values:
1addTaggedVlan
2delTaggedVlan
3addUntaggedVlan
4delUntaggedVlan
5addDefaultVlan
6delDefaultVlan
 .1.3.6.1.4.1.3902.1015.20.4.1.1
zxAnVlanIfConfVlanList
The value of object name in Vlan list,eg. pkgName,chanName
Different command has different operated Vlan list,so this object
has different meanings.please see the DESCRIPTION of
zxAnVlanPortConfVlanListCmd.
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.4.1.2

zxAnVlanIfTransTable

table
.1.3.6.1.4.1.3902.1015.20.5 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanIfTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfTransTable' 
A table containing VLAN translate information for VLANs
configured into the bridge by (local or network)
management.
zxAnVlanIfTransEntry row .1.3.6.1.4.1.3902.1015.20.5.1
VLAN Translate information for VLANs
configured into the bridge by (local or network)
management.
Indexes
Column Syntax OID
zxAnVlanTranslatePortId
Port ID of Vlan translate rule.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.5.1.1
zxAnVlanIfTransUserVid
VlanId for Vlan translate.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.5.1.2
zxAnVlanIfTransCVid
CVlanId for Vlan translate.
CVlanId is optional field.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.5.1.3
zxAnVlanIfTransSVid
SVlanId for Vlan translate.
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.5.1.4
zxAnVlanIfTransRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.5.1.5
zxAnVlanIfTransVlanMerge
Vlan Translate rule Mode.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.5.1.6

zxAnVlanPortListTable

table
.1.3.6.1.4.1.3902.1015.20.6 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanPortListTable' 
A table containing VLAN PortList information for VLAN +
SHELF + SLOT configured into the bridge by (local or network)
management,  specifying the set of ports to which frames
received on a VLAN for this FDB  and containing a specific
Group destination address are allowed to be forwarded.
zxAnVlanPortListEntry row .1.3.6.1.4.1.3902.1015.20.6.1
Filtering information configured into the bridge by
management, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded.
Indexes
Column Syntax OID
zxAnVlanIndex
vlan index for Vlan Port list.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.6.1.1
zxAnShelfIndex
shelf index for Vlan Port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.6.1.2
zxAnSlotIndex
slot index for Vlan Port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.6.1.3
zxAnVlanPortListSlotIfType
Interface type in this slot.It is used to decide how to decode
ZxAnPortList.It equals the value of InterfaceType field in
ZxAnIfindex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.6.1.4
zxAnVlanPortUntaggedPortList
the untagged ports of the vlan.
ZTE-AN-TC-MIBZxAnPortList .1.3.6.1.4.1.3902.1015.20.6.1.5
zxAnVlanPortTaggedPortList
the tagged ports of the vlan.
ZTE-AN-TC-MIBZxAnPortList .1.3.6.1.4.1.3902.1015.20.6.1.6

zxAnVlanGlobalTransTable

table
.1.3.6.1.4.1.3902.1015.20.7 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanGlobalTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanGlobalTransTable'
zxAnVlanGlobalTransEntry row .1.3.6.1.4.1.3902.1015.20.7.1
Indexes
Column Syntax OID
zxAnVlanGlobalTransSessionNo
This object indecate the index of item.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.3902.1015.20.7.1.1
zxAnVlanMpTranslatePortId
This object indecates the ifindex of epon olt port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.7.1.2
zxAnVlanGlobalTransVid
 ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.7.1.3
zxAnVlanGlobalTransCVid
CVlanId for Vlan translate.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1015.20.7.1.4
zxAnVlanGlobalTransSVid
SVlanId for Vlan translate.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.7.1.5
zxAnVlanMpTranslateDirection
Stream direction for Vlan translate.At present the object hasn't
been used.
Enumerationr/w
Enumerated Values:
1upStream
2downStream
 .1.3.6.1.4.1.3902.1015.20.7.1.6
zxAnVlanGlobalTransRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.7.1.7
zxAnVlanGlobalTransVlanMerge
Vlan Translate Mode.At present the object hasn't been used.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.7.1.8

zxAnVlanMpExQinQTable

table
.1.3.6.1.4.1.3902.1015.20.8 · 1 row entry · 13 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanMpExQinQTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanMpExQinQTable'
zxAnVlanMpExQinQEntry row .1.3.6.1.4.1.3902.1015.20.8.1
Indexes
Column Syntax OID
zxAnVlanExQinQSessionNo
index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.1
zxAnVlanSmartQinQIfIndex
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.2
zxAnVlanSmartQinQUserVid
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.3
zxAnVlanSmartQinQSelectiveType
 Enumerationr/w
Enumerated Values:
1cvlanscope
2ethertype
3cos
4cvlancos
5cvlanethertype
6cvlantransparent
 .1.3.6.1.4.1.3902.1015.20.8.1.4
zxAnVlanSmartQinQStartUserVid
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.5
zxAnVlanSmartQinQEndUserVid
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.6
zxAnVlanExQinQInCVlanMask
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.7
zxAnVlanSmartQinQEtherType
{0x0800(IP), 0x0806(ARP), 0x8863(PPPOE discovery phase),
0x8864(PPPOE session phase)}
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.8
zxAnVlanSmartQinQUserCos
 Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.3902.1015.20.8.1.9
zxAnVlanSmartQinQSVid
 ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.8.1.10
zxAnVlanSmartQinQStagCos
Cos value is between 0 to 7, default value 255 represet not
configured
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.8.1.11
zxAnVlanExQinQRefOnuGroupId
The QinQ ONU group ID,refer to zxAnVlanExQinQOnuGroupId.The 0
means that the ONU is not joined any groups.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3902.1015.20.8.1.12
zxAnVlanSmartQinQRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.8.1.50

zxAnVlanVoipConfTable

table
.1.3.6.1.4.1.3902.1015.20.9 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanVoipConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanVoipConfTable' 
A table containing VLAN information for VOIP.
zxAnVlanVoipConfEntry row .1.3.6.1.4.1.3902.1015.20.9.1
Containing VLAN information for VOIP.
Indexes
Column Syntax OID
zxAnVlanVoipVlanId
The VlanId that must exist in zxAnVlanTable.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.9.1.1
zxAnVoipVlanUsages
This configuration parameter defines the related attribute
of vlan.
It is coded in a bit map representation (0 if not allowed,
1 if allowed) with following definition:

Bit 0 media (Indicate vlan o…
Bitsr/w
Enumerated Values:
0media
1signal
 .1.3.6.1.4.1.3902.1015.20.9.1.2
zxAnVlanVoipRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.9.1.50

zxAnVlanMpExQinQPortTable

table
.1.3.6.1.4.1.3902.1015.20.12 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanMpExQinQPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanMpExQinQPortTable'
zxAnVlanMpExQinQPortEntry row .1.3.6.1.4.1.3902.1015.20.12.1
Indexes
Column Syntax OID
zxAnVlanExQinQPortIndex
An index for PON port or ONU.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.12.1.1
zxAnVlanSmartQinQIfEnable
Enable status of port QinQ functionanity.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.12.1.2
zxAnVlanExQinQOnuMapGroupId
The extend QinQ ONU group ID,refer to zxAnVlanExQinQOnuGroupId.
The 0 means that the ONU is not joined any groups.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3902.1015.20.12.1.3
zxAnVlanExQinQPortResVlan
It is only used by QinQ V2 and can be set when enable
zxAnVlanSmartQinQIfEnable base on PON port ,if not specified
reserved VLAN default value is 4094. The zxAnVlanExQinQPortResVlan
is invalid for ONU and get zxAnVla…
Integer32r/w
Constraints:
range: 4055-4094
 .1.3.6.1.4.1.3902.1015.20.12.1.4

zxAnVlanMpExTranslatePortTable

table
.1.3.6.1.4.1.3902.1015.20.13 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanMpExTranslatePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanMpExTranslatePortTable'
zxAnVlanMpExTranslatePortEntry row .1.3.6.1.4.1.3902.1015.20.13.1
Indexes
Column Syntax OID
zxAnVlanExTranslatePortIndex
An index for PON ONU.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.13.1.1
zxAnVlanExTranslatePortEnabled
Enable status of port Translate functionanity.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.20.13.1.2

zxAnProtocolVlanMapTable

table
.1.3.6.1.4.1.3902.1015.20.16 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnProtocolVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnProtocolVlanMapTable' 
ethernet protocol vlan mapping.
zxAnProtocolVlanMapEntry row .1.3.6.1.4.1.3902.1015.20.16.1
ethernet protocol vlan mapping.
Indexes
Column Syntax OID
zxAnProtocolVlanPortIndex
An index for port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.16.1.1
zxAnEtherProtocolType
Ethernet Protocol.
'1' indicates IP.
'2' indicates ARP.
'3' indicates PPPoE discovery phase.
'4' indicates PPPoE session phase.
User define uses hex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.16.1.2
zxAnVlanIfProtoMapVid
SVlanId .
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.16.1.3
zxAnVlanIfProtoMapCos
SVlan cos priority
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.20.16.1.4
zxAnVlanIfProtoMapCVid
CVlanId.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.16.1.5
zxAnVlanIfProtoMapCtagCos
CVlan cos priority
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.20.16.1.6
zxAnVlanIfProtoMapRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.16.1.100

zxAnXconnectTable

table
.1.3.6.1.4.1.3902.1015.20.18 · 1 row entry · 9 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnXconnectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnXconnectTable' 
1:1 Vlan Mib table.
zxAnXconnectEntry row .1.3.6.1.4.1.3902.1015.20.18.1
ethernet protocol vlan mapping.
Indexes
Column Syntax OID
zxAnXconnectPortIndex
An index for port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.18.1.1
zxAnXconnectLocationIndex
Ethernet Protocol
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.18.1.2
zxAnXconnectMode
SVlanId .
Enumerationr/w
Enumerated Values:
1tlsvlan
2cvlan
3svlan
 .1.3.6.1.4.1.3902.1015.20.18.1.3
zxAnVlanBasedFwdSVid
SVlan cos priority
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.18.1.4
zxAnVlanBasedFwdCVid
SVlan cos priority
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.18.1.5
zxAnXconnectNewCvlanId
SVlan cos priority
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.18.1.6
zxAnXconnectNewSvlanId
SVlan cos priority
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.18.1.7
zxAnVlanBasedFwdUplinkPort
SVlan cos priority
ZTE-AN-TC-MIBZxAnIfindexr/w .1.3.6.1.4.1.3902.1015.20.18.1.8
zxAnVlanBasedFwdRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.18.1.100

zxAnOnuMngVlanTable

table
.1.3.6.1.4.1.3902.1015.20.25 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnOnuMngVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnOnuMngVlanTable' 
Onu inband management vlan table.
zxAnOnuMngVlanEntry row .1.3.6.1.4.1.3902.1015.20.25.1
Indexes
Column Syntax OID
zxAnOnuMngVlan
A key that identifies the onu inband management vlan.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.25.1.1
zxAnOnuMngVlanRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.25.1.20

zxAnIpRouteVlanTable

table
.1.3.6.1.4.1.3902.1015.20.26 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnIpRouteVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnIpRouteVlanTable' 
IP route vlan table,IP routing to forward in the OLT-side according to 
vlan.
zxAnIpRouteVlanEntry row .1.3.6.1.4.1.3902.1015.20.26.1
Indexes
Column Syntax OID
zxAnIpRouteVlan
A key that identifies the IP routing forwarding vlan .
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.26.1.1
zxAnIpRouteVlanRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.26.1.20

zxAnVlanInterfaceTable

table
.1.3.6.1.4.1.3902.1015.20.27 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanInterfaceTable' 
Vlan interface configuration table
zxAnVlanInterfaceEntry row .1.3.6.1.4.1.3902.1015.20.27.1
Indexes
Column Syntax OID
zxAnVlanInterfaceVlanId
VlanId for Vlan interface.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.27.1.1
zxAnVlanBroadcastRateLimit
Indicates broadcast rate-limit
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.27.1.5

zxAnPortMvlanTranslateTable

table
.1.3.6.1.4.1.3902.1015.20.28 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPortMvlanTranslateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnPortMvlanTranslateTable' 
A table containing MVLAN translate information for VLANs
configured into the bridge by (local or network)
management.
zxAnPortMvlanTranslateEntry row .1.3.6.1.4.1.3902.1015.20.28.1
MVLAN Translate information for VLANs
configured into the bridge by (local or network)
management.
Indexes
Column Syntax OID
zxAnPortMvlanTranslateIfIndex
Port ID of Mvlan translate rule.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.28.1.1
zxAnPortMvlanTranslateMvlan
VlanId for Mvlan translate.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.28.1.2
zxAnPortMvlanTranslateCvlan
CVlan Id for Mvlan translate,
1 to 4094 is the CVlan Id, and 0 means translate to untag.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.28.1.3
zxAnMVlanIfTransRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.28.1.10

zxAnVlanIfProtoMapEnableTable

table
.1.3.6.1.4.1.3902.1015.20.29 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanIfProtoMapEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfProtoMapEnableTable' 
Config vlan the protocol-mapping switch, default false.
zxAnVlanIfProtoMapEnableEntry row .1.3.6.1.4.1.3902.1015.20.29.1
Vlan mapping enable switch
Indexes
Column Syntax OID
zxAnProtocolVlanPortIfIndex
An index for pvc.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.29.1.1
zxAnVlanIfProtoMapEnable
Enable this switch before config vlan mapping,
default value is false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.20.29.1.2

zxAnInternalVlanTable

table
.1.3.6.1.4.1.3902.1015.20.30 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnInternalVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnInternalVlanTable' 
A table containing system Internal used VLANs information.
zxAnInternalVlanEntry row .1.3.6.1.4.1.3902.1015.20.30.1
Entry contains system Internal VLAN information,
including and service type VLAN IDs.
Indexes
Column Syntax OID
zxAnInternalVlanServiceType
The system Internal used VLAN service type, there are five types:
- vpn
- voipUpstream
- voipDownStream
- ieee1588
- gpon
Enumeration
Enumerated Values:
1vpn
2voipUpstream
3voipDownstream
4ieee1588
5gpon
 .1.3.6.1.4.1.3902.1015.20.30.1.1
zxAnInternalVlanList
Internal vlan sequence, eg. 1-3,5 means that vlan 1,2,3,5
are Internal used.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.20.30.1.2
zxAnInternalVlanRowStatus
Row Status of the Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.30.1.20

zxAnVlanExQinQOnuGroupTable

table
.1.3.6.1.4.1.3902.1015.20.31 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanExQinQOnuGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanExQinQOnuGroupTable' 
A table containing QinQ ONU groups.
zxAnVlanExQinQOnuGroupEntry row .1.3.6.1.4.1.3902.1015.20.31.1
Entry for zxAnVlanExQinQOnuGroupTable.
Indexes
Column Syntax OID
zxAnVlanExQinQPonPortIndex
An index for PON port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.31.1.1
zxAnVlanExQinQOnuGroupId
The extend QinQ ONU group ID.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.3902.1015.20.31.1.2
zxAnVlanExQinQOnuGroupName
The extend QinQ ONU group name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.1015.20.31.1.3
zxAnVlanExQinQOnuGroupResVlan
The reserved VLAN of the QinQ ONU group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.31.1.4
zxAnVlanExQinQOnuGroupMembers
The members of the group.Its members are the ONU number,
comma, hyphen. eg. 1-3,5 means ONU 1,2,3,5.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.20.31.1.5

zxAnVlanTpidTable

table deprecated
.1.3.6.1.4.1.3902.1015.20.32.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanTpidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTpidTable' 
A table containing VLAN TPID configuration.
zxAnVlanTpidEntry row .1.3.6.1.4.1.3902.1015.20.32.2.1
Entry for zxAnVlanTpidTable.
Indexes
Column Syntax OID
zxAnVlanTpidSVlanId
SVLAN ID of the port.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1015.20.32.2.1.1
zxAnVlanTpidCVlanId
CVLAN ID of the port.
If zxAnVlanTpidCVlanId is 0, the TPID of single tag traffic
will be modified.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.32.2.1.2
zxAnVlanTpid
This object indicates the SVLAN TPID with HEX.
Default VLAN 0x8100(33024).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.32.2.1.3
zxAnVlanTpidRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.32.2.1.50

zxAnIeee1588VlanTable

table
.1.3.6.1.4.1.3902.1015.20.33 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnIeee1588VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnIeee1588VlanTable' 
IEEE1588 VLAN table.
zxAnIeee1588VlanEntry row .1.3.6.1.4.1.3902.1015.20.33.1
IEEE1588 VLAN table entry.
Indexes
Column Syntax OID
zxAnIeee1588Vlan
This object indicates the VLAN ID that is used to forward the
IEEE1588 clock synchronization packet.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.33.1.1
zxAnIeee1588VlanRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.33.1.50

zxAnMVlanGlobalTransTable

table
.1.3.6.1.4.1.3902.1015.20.34 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMVlanGlobalTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnMVlanGlobalTransTable' 
A table containing global MVLAN translate information.
zxAnMVlanGlobalTransEntry row .1.3.6.1.4.1.3902.1015.20.34.1
Entry for zxAnMVlanGlobalTransTable.
Indexes
Column Syntax OID
zxAnMVlanGlobalTransMVid
VLAN ID for MVLAN translated.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.34.1.1
zxAnMVlanGlobalTransCVid
CVLAN ID for MVLAN translate,
1 to 4094 is the CVLAN ID, and 0 means translate to untag.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.34.1.2
zxAnMVlanGlobalTransRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.34.1.20

zxAnVlanStormCtrlTable

table
.1.3.6.1.4.1.3902.1015.20.35 · 1 row entry · 1 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanStormCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanStormCtrlTable' 
A table containing VLAN storm control information.
zxAnVlanStormCtrlEntry row .1.3.6.1.4.1.3902.1015.20.35.1
Entry for zxAnVlanStormCtrlTable.
Indexes
Column Syntax OID
zxAnVlanMulticastFloodCtrl
The multicast packet flood control of VLAN.
Enumerationr/w
Enumerated Values:
1floodUnknown
2dropUnknown
3floodAll
 .1.3.6.1.4.1.3902.1015.20.35.1.1

zxAnVlanTagPortListTable

table
.1.3.6.1.4.1.3902.1015.20.36 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanTagPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTagPortListTable' 
VLAN tag port list table.
zxAnVlanTagPortListEntry row .1.3.6.1.4.1.3902.1015.20.36.1
VLAN tag port list entry.
Indexes
Column Syntax OID
zxAnVlanStag
S-Tag for port list.
Value 0 means to query VLAN tag port list without S-Tag.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.36.1.1
zxAnVlanCtag
C-Tag for port list.
Value 0 means to query VLAN tag port list without C-Tag.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.36.1.2
zxAnVlanTagShelf
Shelf No. for VLAN tag port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.36.1.3
zxAnVlanTagSlot
Slot No. for VLAN tag port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.36.1.4
zxAnVlanTagPortList
The ports of the VLAN tag.

If zxAnVlanStag equals 0 and zxAnVlanCtag does not equal 0,
zxAnVlanTagPortList means the ports of the specified C-Tag.

If zxAnVlanStag does not equal 0 and zxAn…
ZTE-AN-TC-MIBZxAnPortList .1.3.6.1.4.1.3902.1015.20.36.1.5

zxAnVlanConfTpidTable

table
.1.3.6.1.4.1.3902.1015.20.37 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanConfTpidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanConfTpidTable' 
A table containing VLAN TPID information.
zxAnVlanConfTpidEntry row .1.3.6.1.4.1.3902.1015.20.37.1
Entry for zxAnVlanConfTpidTable.

The multi-variables binding rule should be complied with when a
manager creates a VLAN TPID. According to this rule, all the
related mib variables must be included in one …
Indexes
Column Syntax OID
zxAnVlanTpidConfTpid
This object indicates the Outer VLAN TPID of this VLAN.
Value define uses hex.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.20.37.1.1
zxAnVlanTpidConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.37.1.50

zxAnVlanRuledTransTable

table
.1.3.6.1.4.1.3902.1015.20.38.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanRuledTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanRuledTransTable' 
This table includes ruled VLAN translate configuration.     
          
Mandatory variables must be in the one snmp set operation.
Optional variables may be in the one snmp set operation with the 
mandatory variables, but must not be used alone.
          
- mandatoty: 
zxAnVlanRuledTransUserVid, 
zxAnVlanRuledTransRowStatus
- optional : none
zxAnVlanRuledTransEntry row .1.3.6.1.4.1.3902.1015.20.38.2.1
An entry in zxAnVlanRuledTransTable.
Indexes
Column Syntax OID
zxAnVlanRuledTransSVid
The network side SVLAN.
'0' indicates no config.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.38.2.1.1
zxAnVlanRuledTransCVid
The network side CVLAN.
'0' indicates any CVLAN.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.38.2.1.2
zxAnVlanRuledTransUserVid
User VLAN ID.
'0' indicates removing the network side VLAN.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.38.2.1.3
zxAnVlanRuledTransRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.38.2.1.50

zxAnVlanIfCosMapEnableTable

table
.1.3.6.1.4.1.3902.1015.20.39.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanIfCosMapEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfCosMapEnableTable' 
This table includes CoS mapping VLAN enabling configuration
zxAnVlanIfCosMapEnableEntry row .1.3.6.1.4.1.3902.1015.20.39.2.1
An entry in zxAnVlanIfCosMapEnableTable.
Indexes
Column Syntax OID
zxAnVlanIfCosMapEnable
Enable/disable CoS mapping VLAN on the interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.20.39.2.1.1

zxAnVlanIfCosMapTable

table
.1.3.6.1.4.1.3902.1015.20.39.3 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanIfCosMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfCosMapTable' 
This table includes CoS mapping VLAN configuration of interface. 
          
Mandatory variables must be in the one snmp set operation.
Optional variables may be in the one snmp set operation with the 
mandatory variables, but must not be used alone.
          
- mandatoty: 
zxAnVlanIfCosMapSVid, 
zxAnVlanIfCosMapCVid,
zxAnVlanIfCosMapRowStatus
          
- optional : none
zxAnVlanIfCosMapEntry row .1.3.6.1.4.1.3902.1015.20.39.3.1
An entry in zxAnVlanIfCosMapTable.
Indexes
Column Syntax OID
zxAnVlanIfCosMapCos
CoS priority.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.20.39.3.1.1
zxAnVlanIfCosMapSVid
CoS priority mapping SVID.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1015.20.39.3.1.2
zxAnVlanIfCosMapCVid
CoS priority mapping CVID.
Value 0 means no CVID.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.39.3.1.3
zxAnVlanIfCosMapRowStatus
The status of this conceptual row.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to createAndGo(4), and must com…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.39.3.1.50

zxAnVlanBasedForwardTable

table
.1.3.6.1.4.1.3902.1015.20.40.2 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVlanBasedForwardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanBasedForwardTable' 
This table includes VLAN based forward rule configuration.
zxAnVlanBasedForwardEntry row .1.3.6.1.4.1.3902.1015.20.40.2.1
An entry in zxAnVlanBasedForwardTable.
To create a row in this table, the zxAnVlanBasedForwardSVid and
zxAnVlanBasedForwardCVid can contain only one user port and one
uplink port.
The zxAnVlanBasedForwardUserPort and z…
Indexes
Column Syntax OID
zxAnVlanBasedForwardSVid
SVLAN
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.20.40.2.1.1
zxAnVlanBasedForwardCVid
CVLAN,'0' indicates no config.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.20.40.2.1.2
zxAnVlanBasedForwardIfIndex
An index for user port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.40.2.1.3
zxAnVlanBasedForwardUplinkPort
An index for uplink port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.20.40.2.1.4
zxAnVlanBasedForwardRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.20.40.2.1.50