ZTE-AN-REMOTE-UNIT-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
45

zxAnRuSwUpdatingTaskTable

table
.1.3.6.1.4.1.3902.1015.80.1.2.2 · 1 row entry · 17 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnRuSwUpdatingTaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-REMOTE-UNIT-MGMT-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-REMOTE-UNIT-MGMT-MIB::zxAnRuSwUpdatingTaskTable' 
Remote Unit software version update task configuration information 
table. It will complete batch RU version upgrade of two scenarios, 
one is online, the other is offline(automatic upgrade).
zxAnRuSwUpdatingTaskEntry row .1.3.6.1.4.1.3902.1015.80.1.2.2.1
Remote Unit software version update task configuration information
entry.
Indexes
Column Syntax OID
zxAnRuSwUpdatingTaskName
The task name of software version updating.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.1
zxAnRuSwUpdatingTaskDesc
The task description.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.2
zxAnRuSwUpdatingTaskMode
The update mode of task.
Mode is defined as follows:
1 update software version to online RU
2 update software version to offline RU
3 updating software version supports both online RU and
offline
Enumerationr/w
Enumerated Values:
1online
2offline
3both
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.3
zxAnRuSwUpdatingTaskServiceType
The Remote Unit service type such as 'GPON','EPON','ADSL2',
'VDSL2' etc.
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.4
zxAnRuSwUpdatingTaskVendor
The vendor of Remote Unit, such as 'zte', 'cisco' etc.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.5
zxAnRuSwUpdatingTaskEquipType
The Remote Unit equipment type such as 'F620', 'D420', 'F622' etc.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.6
zxAnRuSwUpdatingTaskCrtrnType
The criterion type of the updating rule.
Enumerationr/w
Enumerated Values:
1ignore
2equal
3notEqual
4below
5upper
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.7
zxAnRuSwUpdatingTaskCrtrnVer
The Remote Unit running version as the base to compare.
The maximum byte size is 16 for EPON and 14 for GPON.
when 'zxAnRuSwUpdatingTaskCrtrnType' is 'ignore', then the size
of the value is zero.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.8
zxAnRuSwUpdatingTaskOperObjType
The operation object type of task.
Type is defined as follows:
1 update version according to ne
2 update version according to port, port is defined as PON port
for xPON equipment
Enumerationr/w
Enumerated Values:
1ne
2port
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.9
zxAnRuSwUpdatingTaskOperObjList
The Remote Unit operation object list.
This attribute is only valid for port level,if NE level then
size of the attribute is zero.
Object format is defined as follows:
Remote Unit service type(1 byte) + slot count(1 b…
OctetStringr/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.10
zxAnRuSwUpdatingTaskAction
The action of the task.
Enumerationr/w
Enumerated Values:
1abort
2restart
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.11
zxAnRuSwUpdatingTaskFileName
The version file used to update.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.12
zxAnRuSwUpdatingTaskFileLocate
The version file location.
It includes two ways, one is local way that file comes from NE,
the other is remote way that file comes from remote FTP server.
Enumerationr/w
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.13
zxAnRuSwUpdatingTaskStatus
The task status.
Enumeration
Enumerated Values:
1processing
2aborted
3finished
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.14
zxAnRuSwUpdatingTaskRuAction
The RU updating action of software version.
Enumerationr/w
Enumerated Values:
1update
2updateAndReboot
3reboot
4updateLinkup
5updateAndCommit
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.15
zxAnRuSwUpdatingTaskParallelLmt
The number of parallel limited in a task.
Zero means no limit.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.16
zxAnRuSwUpdatingTaskRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.80.1.2.2.1.30

zxAnRuSwTaskStatTable

table
.1.3.6.1.4.1.3902.1015.80.1.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnRuSwTaskStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-REMOTE-UNIT-MGMT-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-REMOTE-UNIT-MGMT-MIB::zxAnRuSwTaskStatTable' 
RU software update task statistics information table.
zxAnRuSwTaskStatEntry row .1.3.6.1.4.1.3902.1015.80.1.2.3.1
RU software update task statistics information entry.
Indexes
Column Syntax OID
zxAnRuSwTaskStatsSuccesses
The successful RU count of updating in a task.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.3.1.1
zxAnRuSwTaskStatsFailures
The failed RU count of updating in a task.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.3.1.2
zxAnRuSwTaskStatsUpdatings
The RU count of updating in progress in a task.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.3.1.3
zxAnRuSwTaskStatsWaitings
The RU count of waiting in a task.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.3.1.4

zxAnRuSwUpdateStatusTable

table
.1.3.6.1.4.1.3902.1015.80.1.2.4 · 1 row entry · 16 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnRuSwUpdateStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-REMOTE-UNIT-MGMT-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-REMOTE-UNIT-MGMT-MIB::zxAnRuSwUpdateStatusTable' 
RU software version update status configuration information 
table.Each RU exists an item in this table,it records the 
result of updating RU version last time.If RU version updating
is in process then can get the updating percent by reading 
this table.
zxAnRuSwUpdateStatusEntry row .1.3.6.1.4.1.3902.1015.80.1.2.4.1
RU software version updating status configuration information
entry.
Indexes
Column Syntax OID
zxAnRuSwRack
The rack No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.1
zxAnRuSwShelf
The shelf No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.2
zxAnRuSwSlot
The slot No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.3
zxAnRuSwPort
The port No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.4
zxAnRuSwOnu
The ONU No,it is only valid for xPON RU
,if RU isn't xPON equment then the value is zero.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.5
zxAnRuSwUpdateStatusServiceType
The RU service type such as 'GPON', 'EPON', 'ADSL2',
'VDSL2' etc.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.6
zxAnRuSwUpdateStatusEquipType
The RU equipment type such as 'F620', 'D420', 'F622' etc.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.7
zxAnRuSwUpdateStatusFileName
The version file name.
OctetString
Constraints:
range: 1-14
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.8
zxAnRuSwUpdateStatusResult
The result status of updating version.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failure
5waiting
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.9
zxAnRuSwUpdateStatusFailReason
The failure reason of updating version.
Enumeration
Enumerated Values:
1none
2downloadErr
3commitErr
4activateErr
5crcErr
6validErr
7useAbort
8offline
9rebootErr
10ruDeleted
11timeout
12notSupport
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.10
zxAnRuSwUpdateStatusProgress
The percent of updating version.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.11
zxAnRuSwUpdateStatusSource
The source of updating version.
It includes two ways, one is task updating, the other is
manual updating.
Enumeration
Enumerated Values:
1task
2manual
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.12
zxAnRuSwUpdateStatusTaskName
The updating task name.
When zxAnRuSwUpdateStatusSource is 'task' requires this attribute.
When zxAnRuSwUpdateStatusFileLocate is 'manual' then the
size of the attribute is zero.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.13
zxAnRuSwUpdateStatusModifyTime
The last modification time.
The format is yyyy-mm-dd HH:MM:SS.For example,
2001-01-01 02:22:33 .
OctetString
Constraints:
range: 1-19
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.14
zxAnRuSwUpdateStatusCurrVersion
This attribute identifies the now version of the software.
OctetString
Constraints:
range: 1-14
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.15
zxAnRuSwUpdateStatusLastVersion
This attribute identifies the old version of the software.
OctetString
Constraints:
range: 1-14
 .1.3.6.1.4.1.3902.1015.80.1.2.4.1.16

zxAnRuSwImageTable

table
.1.3.6.1.4.1.3902.1015.80.1.2.5 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnRuSwImageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-REMOTE-UNIT-MGMT-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-REMOTE-UNIT-MGMT-MIB::zxAnRuSwImageTable' 
RU software version information table.
Usually,two instances of the software image managed entity are 
contained in an instance of an RU or equipment managed entity 
whose software is independently managed.
zxAnRuSwImageEntry row .1.3.6.1.4.1.3902.1015.80.1.2.5.1
RU software version information entry.
Indexes
Column Syntax OID
zxAnRuSwImageRack
The rack No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.1
zxAnRuSwImageShelf
The shelf No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.2
zxAnRuSwImageSlot
The slot No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.3
zxAnRuSwImagePort
The port No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.4
zxAnRuSwImageOnu
The ONU No,it is only valid for xPON RU,
if RU isn't xPON equment then the value is zero.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.5
zxAnRuSwImageIndex
This attribute provides a unique number for each instance of
this managed entity. The number consists of a two-byte field.
The first field (MSB) identifies the ME instance
(RU (value 0x00) or circuit pack slot (valu…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.6
zxAnRuSwImageVersion
This attribute identifies the version of the software.
OctetString
Constraints:
range: 1-14
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.7
zxAnRuSwImageStatus
Bit 0 indicates Whether the associated software image is
'committed'(1) or 'uncommitted'(0).
Bit 1 indicates Whether the associated software image is
'active'(1) or 'inactive'(0).
Bit 2 indicates Whether the associat…
Bits
Enumerated Values:
0isCommitted
1isActive
2isValid
 .1.3.6.1.4.1.3902.1015.80.1.2.5.1.8