ZTE-AN-QOSII-MIB Table View

This table qos Dscp map configuration.It is used 
for a network-side.

zxAnQosIINniDscpMappingEntry row .1.3.6.1.4.1.3902.1015.21.3.3.1

An entry for zxAnQosIINniDscpMappingTable.

Indexes

zxAnQosIINniIngressDscp

Column	Syntax	OID
zxAnQosIINniIngressDscp Dscp index.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.21.3.3.1.1
zxAnQosIINniEgressDscp Map Dscp value.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.21.3.3.1.2
zxAnQosIINniEgressCos Map Cos value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.21.3.3.1.3
zxAnQosIINniEgressDropPrecedence Map drop precedence value.	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.3902.1015.21.3.3.1.4

This table includes interface qos configuration.It is used 
for a Network-side port(interface).

zxAnQosIINniPortCfgEntry row .1.3.6.1.4.1.3902.1015.21.3.4.1

An entry in zxAnQosIINniPortProfileTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnQosIINniDefPriority The default priority for untag packets	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.21.3.4.1.1
zxAnQosIINniTrustDscp Enable or Disable the Dscp trust.	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.4.1.2
zxAnQosIINniTrustCos Enable or Disable the Cos trust.	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.4.1.3
zxAnQosIINniQueuesAlgorithm The scheduling algorithm of queues.	Enumerationr/w Enumerated Values: 1 sp 2 wrr 3 fq	.1.3.6.1.4.1.3902.1015.21.3.4.1.4
zxAnQosIINniQueuesWeight The integer sequence of queque's weight.The size of sequence is 8 and it presents weights for 8 queques. For example,the value {1.2.3.4.5.6.7.8 } means weight of queue0 is 1, weight of queue1 is 2,...,weight of queue7…	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.4.1.5
zxAnQosIINniQueuesMinRate The integer sequence of queue's minrate.The size of sequence is 8 and it presents min rate for 8 queques. For example,the value {100.200.300.400. 500.600.700.800} means queue1's min rate is both 100kbps,...., …	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.4.1.6
zxAnQosIINniQueuesMaxRate The integer sequence of queue's max rate.The size of sequence is 8 and it presents max rate for 8 queques. For example,the value {100.200.300.400. 500.600.700.800} means queue1's max rate is both 100kbps,...., …	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.4.1.7
zxAnQosIINniShapeRateLimit The rate-limit of interface's Sharp, 0 as not limit	kbpsInteger32r/w Constraints: range: 0-0 range: 64-1000000	.1.3.6.1.4.1.3902.1015.21.3.4.1.8
zxAnQosIINniShapeBurstSize The burst-size of interface's Sharp, 0 as not sharp.	kbpsInteger32r/w Constraints: range: 0-0 range: 4-16000	.1.3.6.1.4.1.3902.1015.21.3.4.1.9
zxAnQosIINniQueuesDepth The integer sequence of queque's depth,The range of each maxSize is 1 to 256,units is 2k bytes.	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.4.1.10

The CoS mapping table given DSCP value.

zxAnQosIICos2DscpEntry row .1.3.6.1.4.1.3902.1015.21.3.10.1

An entry (conceptual row) representing a CoS to DSCP
mapping table.

Indexes

zxAnQosIICos2DscpCosValue

Column	Syntax	OID
zxAnQosIICos2DscpCosValue The CoS value.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.21.3.10.1.1
zxAnQosIICos2DscpDscpValue DSCP value corresponding to zxAnQosIICos2DscpCosValue.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.21.3.10.1.2

The DSCP mapping table given CoS value.

zxAnQosIIDscp2CosEntry row .1.3.6.1.4.1.3902.1015.21.3.11.1

An entry (conceptual row) representing a DSCP to CoS
mapping table.

Indexes

zxAnQosIIDscp2CosDscpValue

Column	Syntax	OID
zxAnQosIIDscp2CosDscpValue DSCP value.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.21.3.11.1.1
zxAnQosIIDscp2CosCosValue The CoS value corresponding to zxAnQosIIDscp2CosDscp.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.21.3.11.1.2

This table includes CoS queue mapping profile configuration.

zxAnQosIICos2QueuesProfileEntry row .1.3.6.1.4.1.3902.1015.21.3.13.1

An entry in zxAnQosIICosQueuesProfileTable.

Indexes

zxAnQosIICos2QueuesPrfName

Column	Syntax	OID
zxAnQosIICos2QueuesPrfName The profile name is a display string.It is a index of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.13.1.1
zxAnQosIICos2Queues The integer sequence of queues id mapped to priority . The size of sequence is 8 and it presents 8 queque id for 8 priority. For example,the value {1.2.3.4.5.6.7.8 } means priority0 is mapping to queue0,priority1 is ma…	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.13.1.2
zxAnQosIIDropPrecedence The integer sequence of drop-precedence if congestion occurs. The size of sequence is 8 and it presents 8 drop-precedence for 8 priority. For example,the value {1.2.2.2.2.2.2.0 } means drop-precedence of priority0 is 1…	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.13.1.3
zxAnQosIICos2QueuesRowStatus This object is used to create a new row or to modify or delete an existing row in this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.13.1.20

This table includes queue block profile configuration.

zxAnQosIIQueuesBlockProfileEntry row .1.3.6.1.4.1.3902.1015.21.3.14.1

An entry in zxAnQosIIQueuesBlockProfileTable.

Indexes

zxAnQosIIQueuesBlockPrfName

Column	Syntax	OID
zxAnQosIIQueuesBlockPrfName The profile name is a display string.It is a index of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.14.1.1
zxAnQosIIQueuesPriority The integer sequence of queque's priority. For example,the value {0.1.2.3.4.5.6.7 } means	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.14.1.2
zxAnQosIIQueuesWeight The integer sequence of queque's weight.The size of sequence is 8 and it presents weights for 8 queques. For example,the value {1.2.3.4.5.6.7.8 } means weight of queue0 is 1, weight of queue1 is 2,...,weight of queue7…	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.14.1.3
zxAnQosIIQueuesDepth The integer sequence of queque's depth.	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.14.1.4
zxAnQosIIQueuesBlockRowStatus This object is used to create a new row or to modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.14.1.20

Ingress priority to Egress priority mapping table

zxAnQosIICosRemarkProfileEntry row .1.3.6.1.4.1.3902.1015.21.3.15.1

An entry in zxAnQosIICosRemarkProfileTable.

Indexes

zxAnQosIICosRemarkPrfName

Column	Syntax	OID
zxAnQosIICosRemarkPrfName The profile name is a display string.It is a index of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.15.1.1
zxAnQosIIEgressPriority The integer sequence of priority remarking,ie. Ingress to Egress Priority Mapping information. The size of sequence is 8 and it presents 8 egress priority for 8 ingress priority. For example,the value {0.1.2.3.4.5.6.7…	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.21.3.15.1.2
zxAnQosIICosRemarkRowStatus This object is used to create a new row or to modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.15.1.20

A table of Traffic Configuration Profile.

zxAnQosIITrafficProfileEntry row .1.3.6.1.4.1.3902.1015.21.3.16.1

An entry in zxAnQosIITrafficProfileTable.

Indexes

zxAnQosIITrafficPrfName

Column	Syntax	OID
zxAnQosIITrafficPrfName Traffic profile name which applies for a interface.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.16.1.1
zxAnQosIITrafficConfCir Committed Information Rate(CIR) in kbps. Reserved now.	kbpsInteger32r/w Constraints: range: 0-2621440	.1.3.6.1.4.1.3902.1015.21.3.16.1.2
zxAnQosIITrafficConfCbs Committed Burst Rate(CBS) in kbyte. Reserved now.	kbytesInteger32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.3902.1015.21.3.16.1.3
zxAnQosIITrafficConfPir Peak Information Rate(PIR) in kbps.	kbpsInteger32r/w Constraints: range: 0-2621440	.1.3.6.1.4.1.3902.1015.21.3.16.1.4
zxAnQosIITrafficConfPbs Peak Burst Rate(PBS) in kbyte.	kbytesInteger32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.3902.1015.21.3.16.1.5
zxAnQosIITrafficCosPriorityTrust Mode of COS priority trust mode. override(1) -- Untrust and Override the COS value of the traffic by zxAnQosIITrafficCosPriority. trust(2) -- trust the COS priority of the traffic and not …	Enumerationr/w Enumerated Values: 1 override 2 trust 255 notSupport	.1.3.6.1.4.1.3902.1015.21.3.16.1.6
zxAnQosIITrafficCosPriority The overriding COS priority.255 means not support	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.16.1.7
zxAnQosIITrafficDiscardMode The discard mode is used when the traffic exceeds the limit. noDistinction(1) -- discard extra flow equally. lowPriorityFirst(2) -- discard low priority first.	Enumerationr/w Enumerated Values: 1 noDistinction 2 lowPriorityFirst	.1.3.6.1.4.1.3902.1015.21.3.16.1.8
zxAnQosIITrafficRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.16.1.20

A table of Virtual interface Configuration Profile.

zxAnQosIIVPortProfileEntry row .1.3.6.1.4.1.3902.1015.21.3.17.1

An entry in zxAnQosIIVPortProfileTable.

Indexes

zxAnQosIIVPortPrfName

Column	Syntax	OID
zxAnQosIIVPortPrfName The profile name is a display string.It is a index of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.17.1.1
zxAnQosIIConfCosRemark Associate CoS remark profile. If agent supports zxAnQosIIConfEgressCosRemark, this field in valid only for ingress direction.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.17.1.2
zxAnQosIIConfDefCos Default Cos vlaue,255 meas not support.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.17.1.3
zxAnQosIIConfDefCtagCos Default ctag cos valus,255 meas not support.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.17.1.4
zxAnQosIIConfCosFilter Enable or Disable Cos filter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.21.3.17.1.5
zxAnQosIIConfCosMode Cos set Mode.	Enumerationr/w Enumerated Values: 1 trust 2 override 3 remark 4 trustDscpMap 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.6
zxAnQosIIConfCtagCosMode Ctag Cos set Mode.	Enumerationr/w Enumerated Values: 1 trust 2 override 3 remark 4 trustDscpMap 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.7
zxAnQosIIConfDscpMode Conf dscp mode.	Enumerationr/w Enumerated Values: 1 trust 2 trustCosMap 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.8
zxAnQosIIConfDefScos Conf scos value,255 means not support	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.17.1.9
zxAnQosIIConfIngressCosMode Conf ingress CoS mode.	Enumerationr/w Enumerated Values: 1 trust 2 scosOverride 3 scosRemark 4 ccosScosRemark 5 ccosScosOverride 255 notSupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.10
zxAnQosIIConfEgressCosMode Conf egress cos mode.	Enumerationr/w Enumerated Values: 1 trust 2 remark 3 trustDscpMap 255 notSupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.11
zxAnQosIIConfIngressDscpMode Conf ingress dscp mode.	Enumerationr/w Enumerated Values: 1 trust 2 trustCosMap 255 notSupport	.1.3.6.1.4.1.3902.1015.21.3.17.1.12
zxAnQosIIVPortPrfType Virtual port profile type.	Enumerationr/w Enumerated Values: 1 pon 2 dsl	.1.3.6.1.4.1.3902.1015.21.3.17.1.13
zxAnQosIIConfEgressCosRemark Associate egress-direction CoS Remark profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.17.1.14
zxAnQosIIVPortPrfRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.17.1.20

This table includes interface qos configuration.It is used 
for a User-side port(Physical interface).

zxAnQosIIPortCfgEntry row .1.3.6.1.4.1.3902.1015.21.3.21.1

An entry in zxAnQosIIPortCfgTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnQosIICosQueuePrf Conf Cos queue profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.21.1.1
zxAnQosIIQueueBlockPrf Conf queue block profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.21.1.2
zxAnQosIICosRemarkPrf This object configures CoS remark profile for this interface. The value of this object is the name of the referenced profile in the zxAnQosIICosRemarkProfileTable,or a zero-length String. A zero-length means not suppo…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.3902.1015.21.3.21.1.3

This table includes interface qos configuration.It is used 
for subscriber ports.

zxAnQosIIVPortCfgEntry row .1.3.6.1.4.1.3902.1015.21.3.22.1

An entry in zxAnQosIIVPortCfgTable.

Indexes

zxAnQosIIRack zxAnQosIIShelf zxAnQosIISlot zxAnQosIIPort zxAnQosIIOnu zxAnQosIIVCircuitType zxAnQosIILogicalId

Column	Syntax	OID
zxAnQosIIRack Rack number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.1
zxAnQosIIShelf Shelf number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.2
zxAnQosIISlot Slot number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.3
zxAnQosIIPort The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.4
zxAnQosIIOnu The Onu number.It is 0 in DSL port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.5
zxAnQosIIVCircuitType Virtual circuit type.	Enumeration Enumerated Values: 1 physicalport 2 bridgeport 3 epononu 4 gpon 11 serviceport 12 vlan	.1.3.6.1.4.1.3902.1015.21.3.22.1.6
zxAnQosIILogicalId Logical id of this port. If zxAnQosIIPortServiceType is physicalport, zxAnQosIILogicalId is filled by 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.22.1.7
zxAnQosIIVPortCfgPrf	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.21.3.22.1.8
zxAnQosIIVPortMapQueue Queue value corresponding to Pvc.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.3902.1015.21.3.22.1.9
zxAnQosIIVPortServiceCategory Service category of VPort. The value 255 indicates that no service category is configured to this VPort.	Enumerationr/w Enumerated Values: 1 cbr 2 ubr 3 vbr 255 unconfigured	.1.3.6.1.4.1.3902.1015.21.3.22.1.10
zxAnQosIIVPortPcr Peak cell rate(PCR) in kbps.	kbpsInteger32r/w Constraints: range: 0-20480	.1.3.6.1.4.1.3902.1015.21.3.22.1.11
zxAnQosIIVPortMcr Minimum cell rate(MCR) in kbps. zxAnQosIIVPortMcr is valid when zxAnQosIIVPortServiceCategory is UBR.	kbpsInteger32r/w Constraints: range: 0-20480	.1.3.6.1.4.1.3902.1015.21.3.22.1.12
zxAnQosIIVPortScr Sustained cell rate(SCR) in kbps. zxAnQosIIVPortScr is valid when zxAnQosIIVPortServiceCategory is VBR.	kbpsInteger32r/w Constraints: range: 0-20480	.1.3.6.1.4.1.3902.1015.21.3.22.1.13
zxAnQosIIVPortPcrRemarkCos CoS remark value for traffic lower than PCR and higher than SCR/MCR. The value 255 indicates that no remark CoS is configured.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.22.1.14
zxAnQosIIVPortMcrRemarkCos CoS remark value for traffic lower than MCR. The value 255 indicates that no remark CoS is configured.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.22.1.15
zxAnQosIIVPortScrRemarkCos CoS remark value for traffic lower than SCR. The value 255 indicates that no remark CoS is configured.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.21.3.22.1.16

This table includes interface qos Traffic configuration.It is used 
for subscriber ports.

zxAnQosIITrafficCfgEntry row .1.3.6.1.4.1.3902.1015.21.3.23.1

An entry in zxAnQosIITrafficCfgTable.

Indexes

zxAnQosIITrafficRack zxAnQosIITrafficShelf zxAnQosIITrafficSlot zxAnQosIITrafficPort zxAnQosIITrafficOnu zxAnQosIITrafficVCircuitType zxAnQosIITrafficLogicalId zxAnQosIITrafficDirection

Column	Syntax	OID
zxAnQosIITrafficRack Rack number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.23.1.1
zxAnQosIITrafficShelf Shelf number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.23.1.2
zxAnQosIITrafficSlot Slot number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.23.1.3
zxAnQosIITrafficPort The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.23.1.4
zxAnQosIITrafficOnu The Onu number.It is 0 in DSL port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.23.1.5
zxAnQosIITrafficVCircuitType Virtual circuit type.	Enumeration Enumerated Values: 1 physicalport 2 bridgeport 3 epononu 4 gpon 11 serviceport 12 vlan	.1.3.6.1.4.1.3902.1015.21.3.23.1.6
zxAnQosIITrafficLogicalId Logical id of this port. If zxAnQosIIPortServiceType is physicalport,zxAnQosIILogicalId is filled by 0. If zxAnQosIIPortServiceType is vlan,zxAnQosIILogicalId is filled by svlanId.cvlanId.	ObjectIdentifier	.1.3.6.1.4.1.3902.1015.21.3.23.1.7
zxAnQosIITrafficDirection Egress direction or ingress dirction on a service interface.	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1015.21.3.23.1.8
zxAnQosIITrafficSvcEncapType The encapsulation type on a service interface.	Enumerationr/w Enumerated Values: 1 pppoe 2 ipoe 3 all 255 notsupport	.1.3.6.1.4.1.3902.1015.21.3.23.1.9
zxAnQosIITrafficPrf The traffic profile of ingress or egress direction.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.3902.1015.21.3.23.1.10
zxAnQosIITrafficCfgRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.23.1.20

This table includes interface BandWidth.It is used 
for physical ports.

zxAnQosIITrafficBandwidthEntry row .1.3.6.1.4.1.3902.1015.21.3.24.1

An entry in zxAnQosIITrafficBandwidthTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnQosIITrafficTotalBandwidth Total bandwidth of the interface.	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.24.1.1
zxAnQosIITrafficRemainBandwidth Remaining bandwidth of the interface.	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.21.3.24.1.2

MVLAN-to-CoS mapping table. The table contains MVLAN-to-CoS mapping
information used to remark CoS for the egress traffic of UNI port.

zxAnQosIIMVlan2CosEntry row .1.3.6.1.4.1.3902.1015.21.3.25.1

MVLAN-to-CoS mapping entry.

Indexes

zxAnQosIIMVlan2CosMVlanValue

Column	Syntax	OID
zxAnQosIIMVlan2CosMVlanValue MVLAN.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.3902.1015.21.3.25.1.1
zxAnQosIIMVlan2CosCosValue The CoS value corresponding to MVLAN.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.21.3.25.1.2
zxAnQosIIMVlan2CosRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.21.3.25.1.20