ZTE-AN-NDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
30
.1.3.6.1.4.1.3902.1015.69.1.1.2 · 1 row entry · 9 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSnoopingBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSnoopingBindingTable'
A table provides the NDP bindings information learnt 
by the device.
zxAnNdpSnoopingBindingEntry row .1.3.6.1.4.1.3902.1015.69.1.1.2.1
NDP Snooping Binding Information Entry.
Column Syntax OID
An index of the interface.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.69.1.1.2.1.1
The bound IP address at this interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.2
The bound MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.3
The bridge port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.4
The bound VLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.5
The status of IP Source Guard.
If IP Source Guard is enabled, only traffic from these IP addresses
is allowed to pass through the interface.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.6
The prefix length of IPv6 address.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.7
Lease time of a NDP client's binding.The format is
yyyy-mm-dd HH:MM:SS.For example, 2011-01-01 02:22:33.
OctetString
Constraints:
range: 19-19
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.8
The binding SVLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.69.1.1.2.1.9
.1.3.6.1.4.1.3902.1015.69.1.1.3 · 1 row entry · 3 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSnoopingIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSnoopingIfConfigTable'
The NDP Snooping Port Configuration Table.
zxAnNdpSnoopingIfConfigEntry row .1.3.6.1.4.1.3902.1015.69.1.1.3.1
The NDP Snooping Port Configuration Entry.
Column Syntax OID
An index of the interface.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.69.1.1.3.1.1
NDP Snooping control of the interface.
When NDP Snooping is enabled at an interface, a list of
IP addresses is obtained through NDP Snooping for this
particular interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.1015.69.1.1.3.1.2
NDP Snooping limit of the interface.
This value is used to determine the maximum number of
IP addresses obtained through NDP Snooping for this
particular interface.
Integer32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.3902.1015.69.1.1.3.1.3
.1.3.6.1.4.1.3902.1015.69.1.1.4 · 1 row entry · 2 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSnoopingVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSnoopingVlanConfigTable'
The NDP snooping VLAN configuration table.
zxAnNdpSnoopingVlanConfigEntry row .1.3.6.1.4.1.3902.1015.69.1.1.4.1
The NDP snooping VLAN configuration entry.
Column Syntax OID
VLAN ID.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.1015.69.1.1.4.1.1
NDP snooping control for a specific VLAN.
'enable' indicates the RA received from a specific
VLAN will be used to update binding state table(BST)
if the address is not in BST and has a permitted prefix.
'disable' indi…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.1015.69.1.1.4.1.2
.1.3.6.1.4.1.3902.1015.69.1.2.2 · 1 row entry · 2 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpFilterVlanConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpFilterVlanConfTable'
NDP filter table based on VLAN.
If the VLAN item is set, the NE will dispatch the NDP packets 
downward by check the out port strictly.
zxAnNdpFilterVlanConfEntry row .1.3.6.1.4.1.3902.1015.69.1.2.2.1
An entry in zxAnNdpFilterVlanConfTable.
Column Syntax OID
This object indicates the VLAN ID on which NDP filter feature
is configured.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.1015.69.1.2.2.1.1
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.1015.69.1.2.2.1.50
.1.3.6.1.4.1.3902.1015.69.1.3.2 · 1 row entry · 8 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSlaacSnoopingBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSlaacSnoopingBindingTable'
A table provides the NDP SLAAC bindings information learnt by the
device.
zxAnNdpSlaacSnoopingBindingEntry row .1.3.6.1.4.1.3902.1015.69.1.3.2.1
An entry of zxAnNdpSlaacSnoopingBindingTable.
Column Syntax OID
Interface index.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.69.1.3.2.1.1
Bridge port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.2
SVLAN ID.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.3
MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.4
IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.5
The prefix length of IPv6 address.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.6
Lease time.
The format is yyyy-mm-dd HH:MM:SS.
For example, 2011-01-01 02:22:33.
OctetString
Constraints:
range: 19-19
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.7
IP source guard status.
If IP source guard is enabled, only traffic from these IP addresses
is allowed to pass through the interface.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.3902.1015.69.1.3.2.1.8
.1.3.6.1.4.1.3902.1015.69.1.3.3 · 1 row entry · 3 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSlaacSnoopingIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSlaacSnoopingIfConfTable'
The NDP SLAAC snooping interface configuration table.
zxAnNdpSlaacSnoopingIfConfEntry row .1.3.6.1.4.1.3902.1015.69.1.3.3.1
An entry of zxAnNdpSlaacSnoopingIfConfTable.
Column Syntax OID
Interface index.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.69.1.3.3.1.1
NDP SLAAC snooping control of the interface.
When SLAAC snooping is enabled at an interface, a list of IP
addresses is obtained through SLAAC snooping for this particular
interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.3902.1015.69.1.3.3.1.2
NDP SLAAC snooping binding limit of the interface.
This value is used to determine the maximum number of IP addresses
obtained through SLAAC snooping for this particular interface.
Integer32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.3902.1015.69.1.3.3.1.3
.1.3.6.1.4.1.3902.1015.69.1.3.4 · 1 row entry · 3 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnNdpSlaacSrcGuardIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-NDP-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-NDP-MIB::zxAnNdpSlaacSrcGuardIfConfTable'
NDP SLAAC source guard interface configuration table.
zxAnNdpSlaacSrcGuardIfConfEntry row .1.3.6.1.4.1.3902.1015.69.1.3.4.1
An entry of zxAnNdpSlaacSrcGuardIfConfTable.
Column Syntax OID
Interface index.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.69.1.3.4.1.1
Bridge port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.69.1.3.4.1.2
Enable/disable the source guard.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.3902.1015.69.1.3.4.1.3