ZTE-AN-MULTICAST-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
20

zxAnMulticastIfTestTable

table
.1.3.6.1.4.1.3902.1015.28.2.1.2 · 1 row entry · 20 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMulticastIfTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MULTICAST-TEST-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MULTICAST-TEST-MIB::zxAnMulticastIfTestTable' 
The table listing multicast test entries. An entry indicates a 
test.
zxAnMulticastIfTestEntry row .1.3.6.1.4.1.3902.1015.28.2.1.2.1
An entry in the zxAnMulticastIfTestTable.
Indexes
Column Syntax OID
zxAnMulticastIfTestRack
Rack No. of the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.1
zxAnMulticastIfTestShelf
Shelf No. of the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.2
zxAnMulticastIfTestSlot
Slot No. of the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.3
zxAnMulticastIfTestPort
Physical port No. of the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.4
zxAnMulticastIfTestOnu
ONU No. of the interface.
It is valid only if zxAnMulticastIfTestIfType is 'ponOnu' or
'portVPort' or 'onuUni' or 'servicePort', otherwise, its value
is 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.5
zxAnMulticastIfTestIfType
Type of the interface.
Enumeration
Enumerated Values:
1physicalPort
2bridgePort
3ponOnu
4ponVPort
5onuUni
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.6
zxAnMulticastIfTestLogicalId
Logic index of the interface.

If zxAnMulticastIfTestIfType is 'physicalPort', its value is 0.

If zxAnMulticastIfTestIfType is 'bridgePort', this object
indicates 'pvc', such as oid '1' indi…
ObjectIdentifier .1.3.6.1.4.1.3902.1015.28.2.1.2.1.7
zxAnMulticastIfTestMvlanId
The VLAN of interface which will be used in testing datagram.
Value 0 means untagged.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.8
zxAnMulticastIfTestGroupIpType
Multicast group IP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.9
zxAnMulticastIfTestGroupIp
Multicast group IP address.
The multicast group must be created first.
If can not find the multicast group, test fail.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.10
zxAnMulticastIfTestPriority
The priority of interface which will be used in testing datagram.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.11
zxAnMulticastIfTestDuration
The duration of test.
SecondsInteger32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.12
zxAnMulticastIfTestStatus
The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling.

notStarted(1) - test is not started
inProgress(2) - test is in progress
success(3) …
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.20
zxAnMulticastIfTestFailedReason
The failed reason of test.

none(1) - No error.
pvcNotExist(2) - Specified PVC does not exist.
mvlanNotExist(3) - Specified MVLAN does not exist.
groupNotExist(4) - Speci…
Enumeration
Enumerated Values:
1none
2pvcNotExist
3mvlanNotExist
4groupNotExist
5groupInvalid
6parameterError
7noTrafficDetected
8joinFailed
9leaveFailed
10setAclFailed
11setLoopbackFailed
12getStatsFailed
13hardwareNotSupport
255unknown
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.21
zxAnMulticastIfTestBwAfterJoin
The bandwidth of multicast traffic after join operation.
Notes:there is a possibility that the units of this object maybe
is different, so the units are not specified but can be directly
obtained from zxAnMulticastIfT…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.23
zxAnMulticastIfTestBwAfterLeave
The bandwidth of multicast traffic after leave operation.
Notes:there is a possibility that the units of this object maybe
is different, so the units are not specified but can be directly
obtained from zx…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.24
zxAnMulticastIfTestBwUnit
The unit of bandwidth of multicast traffic.
Enumeration
Enumerated Values:
1pps
2kbps
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.25
zxAnMulticastIfTestMcastPkts
Multicast packets counter of successful test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.26
zxAnMulticastIfTestAction
The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.

start(1) - Start the test.
stop(2) - Stop the test.
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.30
zxAnMulticastIfTestRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

In particular, a newly created row cannot be created
until the correspond…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.28.2.1.2.1.50