ZTE-AN-MPLS-L2VPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
74

zxAnMplsStaticPwTable

table
.1.3.6.1.4.1.3902.1015.59.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMplsStaticPwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnMplsStaticPwTable' 
This table contains information about the
MPLS L2VPN static pseudo wire(PW).
zxAnMplsStaticPwEntry row .1.3.6.1.4.1.3902.1015.59.1.11.1
An entry for zxAnMplsStaticPwTable.
Indexes
Column Syntax OID
zxAnMplsStaticPwName
The pseudo wire profile name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.3902.1015.59.1.11.1.2
zxAnMplsOutgoingPwLabel
The pseudo wire label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of pseudo wire tag…
Unsigned32r/w
Constraints:
range: 1044479-1048575
 .1.3.6.1.4.1.3902.1015.59.1.11.1.3
zxAnMplsIncomingPwLabel
The pseudo wire label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of ps…
Unsigned32r/w
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.1015.59.1.11.1.4
zxAnMplsStaticPwRowStatus
Row Status of the Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.1.11.1.31

zxAnVpwsTable

table
.1.3.6.1.4.1.3902.1015.59.2.11 · 1 row entry · 14 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVpwsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnVpwsTable' 
This table contains information about the MPLS L2VPN VPWS.VPWS
L2VPNs employ layer 2 services over MPLS to build a topology of
point-to-point connections that connect end customer sites in a VPN.
These L2VPNs provide an alternative to private networks that have been
provisioned by means of dedicated leased lines or by means of layer 2
virtual circuits that employ ATM or Frame Relay. The service
provisioned with these L2VPNs is known as Virtual Private Wire Service
(VPWS).
zxAnVpwsEntry row .1.3.6.1.4.1.3902.1015.59.2.11.1
An entry for zxAnVpwsTable.
Indexes
Column Syntax OID
zxAnVpwsL3IfIndex
A unique value for each interface. The field of interface type in
ZxAnIfindex for L3 is 0xF(Layer 3 interface).
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.59.2.11.1.1
zxAnVpwsPeerIpAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/pseudo wire(PW) maintenance protocol is not
used and the address is unknown.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.2.11.1.2
zxAnVpwsPeerIpAddr
This object contains the value of the peer node address
of the pseudo pire(PW)/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(zxPwPeerAddrType is 'unknown').
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.2.11.1.3
zxAnVpwsVcId
Used in the outgoing VC ID field within the 'Virtual
Circuit FEC Element' when LDP signaling is used or pseudo wire ID
AVP for L2TP.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.1015.59.2.11.1.4
zxAnVpwsPwType
Indicates the pseudo wire type (i.e. the carried service).
ZX-PWE3-MIBIANAPwTypeTCr/w
Type Values:
0other
1frameRelayDlci
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
253e1Cesop
254t1Cesop
 .1.3.6.1.4.1.3902.1015.59.2.11.1.5
zxAnVpwsStaticPwName
VPWS pseudo wire profile.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.59.2.11.1.6
zxAnVpwsStandbyPeerIpAddrType
The type of standby peer ip address.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.2.11.1.7
zxAnVpwsStandbyPeerIpAddr
The standby peer IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.2.11.1.8
zxAnVpwsStandbyVcId
The standby VC ID.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.1015.59.2.11.1.9
zxAnVpwsPwe3CWPreferred
It indicates LDP entity prefers to use control word or not in PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.59.2.11.1.10
zxAnVpwsVccvEnable
VCCV(Virtual Circuit Connectivity Verification) enable switch.
VCCV provides a control channel that is associated with
a pseudowire (PW), as well as the corresponding operations and
management functions (such as connect…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.59.2.11.1.11
zxAnVpwsCcTypeCapability
Control Channel(CC) types Capability, it indicates which CC types
are supported.
ZxAnMplsVccvCcType
Type Values:
0pwAch
1mplsRouterAlertLbl
2mplsPwLblTtlEqualsOne
3reserved1
4reserved2
5reserved3
6reserved4
7reserved5
 .1.3.6.1.4.1.3902.1015.59.2.11.1.12
zxAnVpwsCvTypeCapability
Connectivity Verification (CV) Types Capability, it indicates
which CV types are supported.
ZxAnMplsVccvCvType
Type Values:
0icmpPing
1lspPing
2bfd
3reserved1
4reserved2
5reserved3
6reserved4
7reserved5
 .1.3.6.1.4.1.3902.1015.59.2.11.1.13
zxAnVpwsRowStatus
Row Status of the Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.2.11.1.31

zxAnVplsVfiConfigTable

table
.1.3.6.1.4.1.3902.1015.59.3.11 · 1 row entry · 15 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVplsVfiConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnVplsVfiConfigTable' 
VPLS config table.
zxAnVplsVfiConfigEntry row .1.3.6.1.4.1.3902.1015.59.3.11.1
VPLS config Entry.Virtual Forwarding Instance (VFI)is a virtual
Layer 2 forwarding entity that defines the VPLS domain membership
and resembles virtual switches on PE routers.Each VFI maintains
its own MAC table. Provid…
Indexes
Column Syntax OID
zxAnVplsVfiName
Virtual Forwarding Instance (VFI)is a virtual
Layer 2 forwarding entity that defines the VPLS domain
membership and resembles virtual switches on PE routers.
Each Virtual Forwarding Instance maintains its own MAC
table.…
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.3902.1015.59.3.11.1.1
zxAnVplsVfiVcid
This configures Virtual
Circuit id. When VPLS instances of two PE
routers belong to same VPLS region, it is required to
establish pseudo wire to continue the communication between
VPLS instances. PE establishes pseudo w…
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.1015.59.3.11.1.2
zxAnVplsVfiPwType
Two PEs need to negotiate pseudo wire type when they establish
PW.There are two types of PWs in VPLS which are ethernet and
ethernet-vlan.The former one supports transparent transmission
mode, the latter one supports la…
ZX-PWE3-MIBIANAPwTypeTCr/w
Type Values:
0other
1frameRelayDlci
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
253e1Cesop
254t1Cesop
 .1.3.6.1.4.1.3902.1015.59.3.11.1.3
zxAnVplsVfiMaxMacLearningNum
Max MAC learning number.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.3902.1015.59.3.11.1.4
zxAnVplsVfiRemoteMacAgingTime
Remote MAC aging time.
secondInteger32r/w
Constraints:
range: 180-3600
 .1.3.6.1.4.1.3902.1015.59.3.11.1.5
zxAnVplsVfiLocalMacAgingTime
Local MAC aging time.
secondInteger32r/w
Constraints:
range: 180-3600
 .1.3.6.1.4.1.3902.1015.59.3.11.1.6
zxAnVplsVfiBCastRateLimit
Broadcast rate limit.
kbpsInteger32r/w
Constraints:
range: 64-16384000
 .1.3.6.1.4.1.3902.1015.59.3.11.1.7
zxAnVplsVfiMCastRateLimit
Multicast rate limit.
kbpsInteger32r/w
Constraints:
range: 64-16384000
 .1.3.6.1.4.1.3902.1015.59.3.11.1.8
zxAnVplsVfiUnknownUCastRateLimit
Unknown unicast rate limit.
kbpsInteger32r/w
Constraints:
range: 64-16384000
 .1.3.6.1.4.1.3902.1015.59.3.11.1.9
zxAnVplsVfiVcidType
VCID Type, default value is dynamic. If VCID type configured here
is static, it indicates the VPLS domain is static too.
Enumerationr/w
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.3902.1015.59.3.11.1.10
zxAnVplsVfiPwe3CWPreferred
It indicates LDP entity prefers to use control word or not in PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.59.3.11.1.11
zxAnVplsVfiVccvEnable
VCCV(Virtual Circuit Connectivity Verification) enable switch.
VCCV provides a control channel that is associated with
a pseudowire (PW), as well as the corresponding operations and
management functions (such as connect…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.59.3.11.1.12
zxAnVplsVfiCcTypeCapability
Control Channel(CC) types Capability, it indicates which CC types
are supported.
ZxAnMplsVccvCcType
Type Values:
0pwAch
1mplsRouterAlertLbl
2mplsPwLblTtlEqualsOne
3reserved1
4reserved2
5reserved3
6reserved4
7reserved5
 .1.3.6.1.4.1.3902.1015.59.3.11.1.13
zxAnVplsVfiCvTypeCapability
Connectivity Verification (CV) Types Capability, it indicates
which CV types are supported.
ZxAnMplsVccvCvType
Type Values:
0icmpPing
1lspPing
2bfd
3reserved1
4reserved2
5reserved3
6reserved4
7reserved5
 .1.3.6.1.4.1.3902.1015.59.3.11.1.14
zxAnVplsVfiRowStatus
The rowstatus of zxAnVplsVfiConfigTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.3.11.1.30

zxAnVplsVfiPeerIpAddrTable

table
.1.3.6.1.4.1.3902.1015.59.3.12 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVplsVfiPeerIpAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnVplsVfiPeerIpAddrTable' 
VPLS VFI peer address config table.
zxAnVplsVfiPeerIpAddrEntry row .1.3.6.1.4.1.3902.1015.59.3.12.1
VPLS VFI peer address entry.
Indexes
Column Syntax OID
zxAnVplsVfiPeerIpAddrType
VPLS VFI peer address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.3.12.1.1
zxAnVplsVfiPeerIpAddr
This configures VFI parameterpeer. It is required to
designate all PE addresses in one VPLS region.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.3.12.1.2
zxAnVplsVfiStandbyPeerIpAddrType
VPLS VFI standby peer address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.3.12.1.3
zxAnVplsVfiStandbyPeerIpAddr
Standby Peer Ip Address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.3.12.1.4
zxAnVplsVfiStaticPwName
Static pseudo wire name.VFI will use the pseudo wire which
you configured.If not specified pseudo wire name,
VFI will learn pseudo wire.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.3902.1015.59.3.12.1.5
zxAnVplsVfiPwNetType
This configures L2VPN VPLS using static pseudo wire in VFI
configuration mode, hub by default.
Enumerationr/w
Enumerated Values:
1spoke
2hub
 .1.3.6.1.4.1.3902.1015.59.3.12.1.6
zxAnVplsVfiPeerRowStatus
The rowstatus of zxAnVplsVfiPeerIpAddrTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.3.12.1.20

zxAnL3IfVfiConfigTable

table
.1.3.6.1.4.1.3902.1015.59.3.13 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnL3IfVfiConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnL3IfVfiConfigTable' 
L3 interface vfi config table.
zxAnL3IfVfiConfigEntry row .1.3.6.1.4.1.3902.1015.59.3.13.1
T
Indexes
Column Syntax OID
zxAnL3IfVfiIfIndex
A unique value for each interface. The field of
interface type in ZxAnIfindex for L3 is 0xF(Layer
3 interface).
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.59.3.13.1.1
zxAnL3IfVfiName
This value is a record of zxAnVplsVfiConfigTable.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.3902.1015.59.3.13.1.2
zxAnL3IfVfiRowStatus
Row status of zxAnL3IfVfiConfigTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.3.13.1.20

zxAnVplsVfiMacTable

table
.1.3.6.1.4.1.3902.1015.59.3.14 · 1 row entry · 9 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnVplsVfiMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnVplsVfiMacTable' 
VFI MAC table config.
zxAnVplsVfiMacEntry row .1.3.6.1.4.1.3902.1015.59.3.14.1
The entry of zxAnVplsVfiMacTable
Indexes
Column Syntax OID
zxAnVplsVfiMacAddrType
A MAC address type,such as dynamic
or static MAC.
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.3902.1015.59.3.14.1.1
zxAnVplsVfiMacAddr
The local or remote MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.59.3.14.1.2
zxAnVplsVfiMacAddrConfLocation
MAC address can be configured at AC(local)
or pseudo wire(remote).
Enumerationr/w
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.3902.1015.59.3.14.1.3
zxAnVplsVfiMacL3IfVlanIndex
L3 interface vlan id.It configured when
zxAnVplsVfiMacAddrLocation is local.
ZTE-AN-TC-MIBZxAnIfindexr/w .1.3.6.1.4.1.3902.1015.59.3.14.1.4
zxAnVplsVfiMacPeerIpAddrType
VPLS VFI peer ip Address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.3.14.1.5
zxAnVplsVfiMacPeerIpAddr
VFI peer ip address.It will be configured when
zxAnVplsVfiMacAddrLocation is remote.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.3.14.1.6
zxAnVplsVfiMacInnerOutgoingLabel
When zxAnVplsVfiMacAddrLocation value is remote,
zxAnVplsVfiMacInnerOutgoingLabel has virtual value.
Integer32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.1015.59.3.14.1.7
zxAnVplsVfiMacOuterOutgoingLabel
When zxAnVplsVfiMacAddrLocation value is remote,
zxAnVplsVfiMacOuterOutgoingLabel has virtual value.
Integer32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.1015.59.3.14.1.8
zxAnVplsVfiMacRowStatus
The row status of zxAnVplsVfiMacTable.
When zxAnVplsVfiMacAddrType is dynamic,zxAnVplsVfiMacRowStatus
can not be set DELETE.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.3.14.1.30

zxAnTRPwTable

table
.1.3.6.1.4.1.3902.1015.59.4.11 · 1 row entry · 18 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnTRPwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnTRPwTable' 
This table specifies information for configuring and
status monitoring which are common to all service types
and PSN types.
zxAnTRPwEntry row .1.3.6.1.4.1.3902.1015.59.4.11.1
A row in this table represents a pseudo wire (PW) virtual
connection across a packet network. It is indexed by
zxPwIndex, which uniquely identifying a singular
connection.
A row is created by the operator or by the agen…
Indexes
Column Syntax OID
zxAnTRPwIndex
Index for the conceptual row identifying a PW within
this PW Emulation table.
ZXPW-TC-STD-MIBPwIndexType .1.3.6.1.4.1.3902.1015.59.4.11.1.1
zxAnTRPwType
This value indicates the service to be carried over
this PW.
ZX-PWE3-MIBIANAPwTypeTCr/w
Type Values:
0other
1frameRelayDlci
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
253e1Cesop
254t1Cesop
 .1.3.6.1.4.1.3902.1015.59.4.11.1.2
zxAnTRPwPsnType
Set by the operator to indicates the PSN type. Based on
this object, the relevant PSN table entries are created
in the in the PSN specific MIB modules.
ZX-PWE3-MIBIANAPwPsnTypeTCr/w
Type Values:
1mpls
2l2tp
3ip
4mplsOverIp
5gre
6other
 .1.3.6.1.4.1.3902.1015.59.4.11.1.3
zxAnTRPwPeerIpAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.4.11.1.4
zxAnTRPwPeerIpAddr
This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.4.11.1.5
zxAnTRPwPeerVcId
Used in the outgoing VC ID field within the 'Virtual
Circuit FEC Element' when LDP signaling is used or PW ID
AVP for L2TP.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.6
zxAnTRPwStandbyPeerIpAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.59.4.11.1.7
zxAnTRPwStandbyPeerIpAddr
This object contains the value of the standby peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.59.4.11.1.8
zxAnTRPwStandbyPeerVcId
Used in the outgoing VC ID field within the 'Virtual
Circuit FEC Element' when LDP signaling is used or PW ID
AVP for L2TP.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.9
zxAnTRPwOutboundLabel
The PW label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it repr…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.10
zxAnTRPwInboundLabel
The PW label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.11
zxAnTRPwOutboundTunnelLabel
The MPLS Outbound Tunnel Label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.12
zxAnTRPwInboundTunnelLabel
The MPLS Inbound Tunnel Label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.13
zxAnTRPwPayloadSize
The value of this object indicates the PayLoad Size (in bytes)
to be defined during the PW setUp. Upon TX, implementation
must be capable of carrying that amount of bytes.
Upon RX, when the LEN field is set to 0, the pa…
bytesSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.59.4.11.1.14
zxAnTRPwDstMac
The destination MAC address of a pseudo wire (PW) virtual
connection.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.59.4.11.1.15
zxAnTRPwVlanId
This value indicates the vlan.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1015.59.4.11.1.16
zxAnTRPwPrio
This value indicates the priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.59.4.11.1.17
zxAnTRPwRowStatus
For creating, modifying, and deleting this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.59.4.11.1.30

zxAnTRTdmSrcMacTable

table
.1.3.6.1.4.1.3902.1015.59.4.12 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnTRTdmSrcMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MPLS-L2VPN-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MPLS-L2VPN-MIB::zxAnTRTdmSrcMacTable' 
This table specifies information for configuring TDM source MAC
address.
zxAnTRTdmSrcMacEntry row .1.3.6.1.4.1.3902.1015.59.4.12.1
An entry for zxAnTRTdmSrcMacTable.
Indexes
Column Syntax OID
zxAnTRTdmSrcRackNo
Rack number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.59.4.12.1.1
zxAnTRTdmSrcShelfNo
Shelf number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.59.4.12.1.2
zxAnTRTdmSrcSlotNo
Slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.59.4.12.1.3
zxAnTRTdmSrcMac
This value indicates the TDM source MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.59.4.12.1.4