ZTE-AN-MLD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
66
.1.3.6.1.4.1.3902.1015.29.1.1.2 · 1 row entry · 15 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldPortTable'
A table that contains all MLD informations of a logical port.
zxAnMldPortEntry row .1.3.6.1.4.1.3902.1015.29.1.1.2.1
A list of entries of all MLD interface (logical port)information.
Indexes
Column Syntax OID
The logical port No,ie. layer 2 bridge port.
ZTE-AN-TC-MIBZxAnIfindex .1.3.6.1.4.1.3902.1015.29.1.1.2.1.1
The administrative status of port's MLD service.
Enumerationr/w
Enumerated Values:
1enable
2disable
3drop
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.2
The version of MLD protocol which is running on this port.
Enumerationr/w
Enumerated Values:
1mldv1
2mldv2
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.3
The status of fast-leave property,
true:enable fast leave; false: disable fast leave.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.4
zxAnMLDPortProxyIp is the ip of MLD proxy when zxAnMLDWorkingMode
is MLD_proxy(1).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.5
The maxium MLD packet num can be processed in 1 second on this port,
exceeding packets will be discarded.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.6
The maximum permitted traffic in this logical port.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.7
The max multicast groups supported by this port concurrently.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.8
The active multicast groups on this port currentlly.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.9
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.10
The last listener query interval is the maximum response delay
inserted into Multicast-Address-Specific queries sent in response to
done messages, in units of milliseconds..
milli-secondsInteger32r/w
Constraints:
range: 100-65535
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.11
Meaningful only in query messages, and specifies the maximum
allowed delay before sending a responding report, in units
of milliseconds.
milli-secondsInteger32r/w
Constraints:
range: 100-65535
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.12
Ether priority assigned to the upstream MLD packet on the port.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.13
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.14
Enable or disable the auto translating between mvlan and cvlan.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.1015.29.1.1.2.1.15
.1.3.6.1.4.1.3902.1015.29.1.1.3 · 1 row entry · 10 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldMvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldMvlanTable'
A table that contains Multicast VLAN informations.
zxAnMldMvlanEntry row .1.3.6.1.4.1.3902.1015.29.1.1.3.1
A list of entries of all Multicast VLAN information.
Indexes
Column Syntax OID
Multicast vlan ID.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.1
The administrative status of MLD packet on this MVLAN.
Enumerationr/w
Enumerated Values:
1enable
2disable
3drop
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.2
The Mld woke mode of this MVLAN.
Enumerationr/w
Enumerated Values:
1snooping
2router
3proxy
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.3
The host ip of this MVLAN when working on proxy mode.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.4
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.5
Max groups in mvlan,the value lies on the device's ability.
Dsl8000 is 255, dsl9000 is 512,9800 is 1024.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.6
Current active groups in mvlan
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.7
Mld protocol packet's priority in proxy/router mode.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.8
Mld version of host on proxy mode.
Enumerationr/w
Enumerated Values:
1auto
2mldv1
3mldv2
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.9
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.1015.29.1.1.3.1.20
.1.3.6.1.4.1.3902.1015.29.1.1.4 · 1 row entry · 4 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldMvlanPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldMvlanPortListTable'
A table that contains information about ports in a mvlan.
zxAnMldMvlanPortListEntry row .1.3.6.1.4.1.3902.1015.29.1.1.4.1
A list of entries of information about ports in a mvlan.
Column Syntax OID
The shelf that contains the logical port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.4.1.1
The card that contains the logical port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.4.1.2
Source port in mvlan
ZTE-AN-TC-MIBZxAnPortListr/w .1.3.6.1.4.1.3902.1015.29.1.1.4.1.3
Recieving port in mvlan
ZTE-AN-TC-MIBZxAnPortListr/w .1.3.6.1.4.1.3902.1015.29.1.1.4.1.4
.1.3.6.1.4.1.3902.1015.29.1.1.5 · 1 row entry · 9 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldGroupTable'
A table that contains multicast group.
zxAnMldGroupEntry row .1.3.6.1.4.1.3902.1015.29.1.1.5.1
A list of entries of all multicast group info.
Column Syntax OID
Multicast source IpAddress.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.1
Multicast group IpAddress.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.2
Estimated Bandwidth cost by this group,it is used as a traffic
and bandwidth control parameter.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.3
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.4
Max User in this Multicast Group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.5
Current User in this Multicast Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.6
source ip.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.7
host state in this Multicast Group.
Enumeration
Enumerated Values:
1nonMember
2idleMember
3delayingMember
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.8
RowStatus of this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.1015.29.1.1.5.1.15
.1.3.6.1.4.1.3902.1015.29.1.1.6 · 1 row entry · 2 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldGroupPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldGroupPortListTable'
A table that contains static and dynamic portlist in a mvlan group.
zxAnMldGroupPortListEntry row .1.3.6.1.4.1.3902.1015.29.1.1.6.1
A list of entries of all group portlist info.
Column Syntax OID
RowStatus of this row.
ZTE-AN-TC-MIBZxAnPortListr/w .1.3.6.1.4.1.3902.1015.29.1.1.6.1.1
RowStatus of this row.
ZTE-AN-TC-MIBZxAnPortListr/w .1.3.6.1.4.1.3902.1015.29.1.1.6.1.2
.1.3.6.1.4.1.3902.1015.29.1.1.7 · 1 row entry · 1 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldPortActiveGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldPortActiveGroupTable'
show Mld interface dynamic group list
zxAnMldPortActiveGroupEntry row .1.3.6.1.4.1.3902.1015.29.1.1.7.1
A list of entries of all groups information by interface.
Column Syntax OID
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.3902.1015.29.1.1.7.1.1
.1.3.6.1.4.1.3902.1015.29.1.1.8 · 1 row entry · 2 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldParamListCmdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldParamListCmdTable'
Operation command table for multicast port configuration like 
param list,such as zxAnMldMvlanPortSrcPortList,
zxAnMldMvlanPortRecvPortList and zxAnMldMvlanGroupStaticPortList.
A single object such as mvlan will be added or removed to/from 
zxAnMldMvlanPortSrcPortList through this table.
zxAnMldParamListCmdEntry row .1.3.6.1.4.1.3902.1015.29.1.1.8.1
A list of entries of zxAnMldMvlanPortParamListCmdEntry.
Column Syntax OID
The command to operate param list of zxAnMvlanGroupPortListTable.
Each command is related to each meaming of zxAnMvlanGroupStaticPortList.

command meaning of operation …
Enumeration
Enumerated Values:
1addSrcPortToMvlan
2delSrcPortFromMvlan
3addRecPortToMvlan
4delRecPortFromMvlan
5addStaticGroup
6delStaticGroup
.1.3.6.1.4.1.3902.1015.29.1.1.8.1.1
The value of object ID in param list,eg.
addSrcPortToMvlan(1) zxAnMldParamObject is 'mvid.ifid'
delSrcPortFromMvlan(2) zxAnMldParamObject is 'mvid.ifid'
addRecPortToMvlan(3) zxAnMldParamObject is 'mvid.i…
ObjectIdentifierr/w .1.3.6.1.4.1.3902.1015.29.1.1.8.1.2
.1.3.6.1.4.1.3902.1015.29.1.1.9 · 1 row entry · 21 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldCounterTable'
zxAnMldCounterEntry row .1.3.6.1.4.1.3902.1015.29.1.1.9.1
Column Syntax OID
Reset Mld counter when it is set to '1'.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.1
The number of general query packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.2
The number of specific group query packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.3
The number of MLDv1 report packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.4
The number of MLDv2 report packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.5
The number of leaved packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.6
The number of errored packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.7
The number of unknown packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.8
The number of general query packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.9
The number of specific group query packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.10
The number of MLDv1 report packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.11
The number of MLDv2 report packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.12
The number of leaved packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.13
The number of general query packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.14
The number of specific group query packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.15
The number of MLDv1 report packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.16
The number of MLDv2 report packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.17
The number of leaved packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.18
The number of unknown packets dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.19
The number of joined success packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.20
The number of joined failed packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.29.1.1.9.1.21
.1.3.6.1.4.1.3902.1015.29.1.1.50.1 · 1 row entry · 2 columns
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnMldVplsMvlanSrcPwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MLD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MLD-MIB::zxAnMldVplsMvlanSrcPwTable'
A table that contains information about source pseudo wire in 
a mvlan.
zxAnMldVplsMvlanSrcPwEntry row .1.3.6.1.4.1.3902.1015.29.1.1.50.1.1
An entry for zxAnMldVplsMvlanSrcPwTable.
Column Syntax OID
Source pseudo wire name.
OctetString
Constraints:
range: 1-63
.1.3.6.1.4.1.3902.1015.29.1.1.50.1.1.1
Row status of the Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.1015.29.1.1.50.1.1.20