ZTE-AN-INTERFACE-MIB Table View

This table includes the general interface infomation.

zxAnIfEntry row .1.3.6.1.4.1.3902.1015.3.1.1.1

An entry in zxAnIfTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnIfTxNetDataRate Current actual data transmition speed at this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.1.1.2
zxAnIfRxNetDataRate Current actual data recieving speed at this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.1.1.3
zxAnIfStatCounterAdminStatus Reset the statistics counter at this interface.	Enumeration Enumerated Values: 3 resetCounter	.1.3.6.1.4.1.3902.1015.3.1.1.1.4
zxAnIfAdminStatus Operate the interface. lock -- disable the service and alarm of this interface unlock -- release the lock status reset -- reset interface and then return the before adminStatus.	Enumerationr/w Enumerated Values: 1 unlock 2 lock 3 reset	.1.3.6.1.4.1.3902.1015.3.1.1.1.5
zxAnIfLastLinkDownTime The time that the link of interface is down. The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27	OctetString Constraints: range: 0-19	.1.3.6.1.4.1.3902.1015.3.1.1.1.6
zxAnIfLastLinkUpTime The time that the link of interface is up. The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27	OctetString Constraints: range: 0-19	.1.3.6.1.4.1.3902.1015.3.1.1.1.7
zxAnIfLoadDefaultConfiguration Use this parameter to load interface factory default settings.	Enumerationr/w Enumerated Values: 1 loadFactoryDefaults	.1.3.6.1.4.1.3902.1015.3.1.1.1.10
zxAnIfLinkUpDownSeverity Linkdown and linkup trap severity. notification -- zxAnIfAccesslinkDown and zxAnIfAccesslinkUp should be generated when the interface linkup or linkdown occurs. alarm -- zxAnIfAcces…	Enumerationr/w Enumerated Values: 1 notification 2 alarm	.1.3.6.1.4.1.3902.1015.3.1.1.1.11

This table includes the ethernet-like interface configuration.

zxAnEtherIfConfEntry row .1.3.6.1.4.1.3902.1015.3.1.2.1

An entry in zxAnEtherIfConfTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnEtherIfConfDuplexSpeed DURABLE: { auto_negotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the defau…	Enumerationr/w Enumerated Values: 1 autoNegotiate 2 half10 3 full10 4 half100 5 full100 6 full1000 7 full10000 99 illegal	.1.3.6.1.4.1.3902.1015.3.1.2.1.1
zxAnEtherIfActualDuplex The actual duplex for this interface.	Enumeration Enumerated Values: 1 autoNegotiate 2 half 3 full	.1.3.6.1.4.1.3902.1015.3.1.2.1.2
zxAnEtherIfActualSpeed The actual speed for this interface.	Enumeration Enumerated Values: 1 speed10 2 speed100 3 speed1000 4 speed10000 5 autoSpeed	.1.3.6.1.4.1.3902.1015.3.1.2.1.3
zxAnEtherIfConf10GEPhyType The physical tpye of this interface,it is used by 10GE interface only now.	Enumerationr/w Enumerated Values: 1 noUse 2 lan10GE 3 wan10GE	.1.3.6.1.4.1.3902.1015.3.1.2.1.4
zxAnEtherIfConfConnectorType The connector tpye of this interface,such as fibre or copper or auto. if no connector should be regard,it is noUse.	Enumerationr/w Enumerated Values: 1 noUse 2 auto 3 fibre 4 copper	.1.3.6.1.4.1.3902.1015.3.1.2.1.5
zxAnEtherIfConf10GERefClk The reference clock used by this interface.It is used by 10GE port.	Enumerationr/w Enumerated Values: 1 noUse 2 independense 3 line	.1.3.6.1.4.1.3902.1015.3.1.2.1.6
zxAnEtherIfConfFlowCtrlEnable Enable/disable the ehternet flow control.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.2.1.7
zxAnEtherIfPortProtect Enable/disable the ehternet Port Protect.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.2.1.8
zxAnSecIfMacLearnedLimitEnable Enable/disable MAC learning limit.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.2.1.9
zxAnSecIfMaxLearnedMacs Max MAC limit learnt.range is [0,32768]	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.2.1.10
zxAnEtherIfMtu Max Transmission Unit.	Integer32r/w Constraints: range: 1518-9000	.1.3.6.1.4.1.3902.1015.3.1.2.1.11
zxAnEtherIfMcastFloodingCtrl Multicast flooding Control of this port.	Enumerationr/w Enumerated Values: 1 floodingAll 2 floodingOnlyUnknown 3 dropUnknown 4 unsupported	.1.3.6.1.4.1.3902.1015.3.1.2.1.12
zxAnEtherIfPortIsolateEnable Enables and disables the port isolation function. enable(1): The port is added to the isolation group. All the ports in the isolation group are isolated from each other in layer 2,but they are not isolated fro…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.2.1.13

This table includes the ethernet-like port performance statistics.

zxAnEtherIfStatEntry row .1.3.6.1.4.1.3902.1015.3.1.3.1

An entry in zxAnEtherIfStatTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnEtherIfStatFCSErrors The FCSErrors counter of ethernet-like interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.1
zxAnEtherIfStat15minFCSErrors The current 15 mininutes FCSErrors counter of ethernet-like interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.2
zxAnEtherIf15minFcsErrsThresh The threshold of zxAnEtherIfStat15minFCSErrors. When it exceeds this threshold, the zxAnEtherIf15minFcsErrsThreshAlm trap should be generated. If zxAnEtherIfStat15minFCSErrors always exceeds the threshold, only one zxA…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.3
zxAnEtherIfStat1dayFCSErrors The 1 day FCSErrors counter of ethernet-like interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.4
zxAnEtherIf1dayFcsErrsThresh The threshold of zxAnEtherIfStat1dayFCSErrors. When it exceeds this threshold,the zxAnEtherIf1dayFcsErrsThreshAlm trap should be generated. If zxAnEtherIfStat1dayFCSErrors always exceeds the threshold,only one zxAnEth…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.5
zxAnEtherIfOutOctetRate An estimate of the interface's current transmitted bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the no…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.6
zxAnEtherIfOutPktRate An estimate of the interface's current transmitted bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the n…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.7
zxAnEtherIfOutBandwidthUtil An estimate of the interface's current transmitted bandwidth utilization. The value is between 0 to 100.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.8
zxAnEtherIfOutDiscardPktRatio An estimate of the interface's discarded packets ratio being transmitted. When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnInterfaceMgmtCapabilities is 1, the unit is …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.9
zxAnEtherIfOutOctetPeakRate The interface's peak transmitted bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.10
zxAnEtherIfInOctetRate An estimate of the interface's current received bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nomina…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.11
zxAnEtherIfInPktRate An estimate of the interface's current received bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nom…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.12
zxAnEtherIfInBandwidthUtil An estimate of the interface's current received bandwidth utilization. The value is between 0 to 100.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.13
zxAnEtherIfInDiscardPktRatio An estimate of the interface's discarded packets ratio received. When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnInterfaceMgmtCapabilities is 1, the unit is 0.01%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.14
zxAnEtherIfInOctetPeakRate The interface's peak received bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.3.1.15
zxAnEtherIfInErrPktRatio An estimate of the interface's received error packets ratio. The value equals (recevied error packets / total received packets) * 100%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.16
zxAnEtherIfOutBwUtilThresh The threshold of zxAnEtherIfOutBandwidthUtil. When it exceeds this threshold, the zxAnEtherIfOutBwUtilThreshAlarm trap should be generated. If zxAnEtherIfOutBandwidthUtil always exceeds the threshold, only one zxAnEthe…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.3.1.17
zxAnEtherIfInBandwidthUtilThresh The threshold of zxAnEtherIfInBandwidthUtil. When it exceeds this threshold, the zxAnEtherIfInBwUtilThreshAlarm trap should be generated. If zxAnEtherIfInBandwidthUtil always exceeds the threshold, only one zxAnEtherI…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.3.1.18
zxAnEtherIfOutPkts The total number of packets that higher-level protocols requested be transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.19
zxAnEtherIfInOctetsCorrect The total number of correct octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.20
zxAnEtherIfOutOctetsCorrect The total number of correct octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.21
zxAnEtherIfInOctetsError The total number of error octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.22
zxAnEtherIfOutOctetsError The total number of error octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.23
zxAnEthIfStat1SecFcsErrs The current 1 second FCSErrors counter of ethernet-like interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.24
zxAnEthIfStat1SecFcsErrsThresh The threshold of zxAnEthIfStat1SecFcsErrs. When it exceeds this threshold, the zxAnEthIf1SecFcsErrsThreshAlm trap should be generated. If zxAnEthIfStat1SecFcsErrs always exceeds the threshold, only one zxAnEthIf1SecF…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.3.1.25
zxAnEtherIfStatOutDiscardPkt The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.26
zxAnEtherIfStatInDiscardPkt The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet c…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.27
zxAnEtherIfInPkts The total number of received packets. Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.28
zxAnEtherIfStatEs Counter of errored seconds.	secondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.29
zxAnEtherIfStatSes Counter of severely errored seconds.	secondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.30
zxAnEtherIfStatUas Counter of unavailable seconds.	secondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.31
zxAnEtherIfStatLoss Counter of loss of signal seconds.	secondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.3.1.32
zxAnEtherIfStatReset Reset interface statistics counter manually when it is set to '1'.	Enumerationr/w Enumerated Values: 1 resetCounter	.1.3.6.1.4.1.3902.1015.3.1.3.1.100

This table includes the ethernet-like port mirroring.
          
NOTES: 
    1. It must have only one MirroringPort in a device now.
    2. Mirrored Ports  can't be more than 8.

zxAnEtherPortMirroringEntry row .1.3.6.1.4.1.3902.1015.3.1.4.1

An entry in zxAnEtherPortMirroringTable.

Indexes

zxAnEtherIfMirrorSession

Column	Syntax	OID
zxAnEtherIfMirrorSession The session id of the port mirroring.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.4.1.1
zxAnEtherIfMirrorIf The ethernet-like mirroring port.It is the destination port.	ZTE-AN-TC-MIBZxAnIfindexr/w	.1.3.6.1.4.1.3902.1015.3.1.4.1.2
zxAnEtherIfMirrorPortList The ethernet-like mirrored port.It is a sequence of some source ports,such as 1346.1245.2681 . NOTES: Max count of ports is 8 now.	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.3.1.4.1.3
zxAnEtherIfMirrorDirectionList The traffic direction list of the mirrored port list. Each value of the sequence represents a traffic direction. The value may be followings: both(1) egress(2), ingress(3),	ObjectIdentifierr/w	.1.3.6.1.4.1.3902.1015.3.1.4.1.4
zxAnEtherIfMirrorRowStatus Rowstatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.4.1.5

This table is interface loop back configuration information table

zxAnIfLoopBackConfEntry row .1.3.6.1.4.1.3902.1015.3.1.7.1

An entry containing interface loop back configuration information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnIfLoopBackConfDetection Enable or disable the self-loop detection functionality for special interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.7.1.1

This table is interface loop back information table

zxAnIfLoopBackEntry row .1.3.6.1.4.1.3902.1015.3.1.8.1

An entry containing interface loop back information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnIfLoopBackStatus The loop back status. The value selfLoop means interface self-loop is detected. selfLoopRecover means that interface is closed because of self-loop failure. selfLoopRecover means that the status of interface is trying…	Enumeration Enumerated Values: 1 normal 2 selfLoop 3 selfLoopClose 4 selfLoopRecover	.1.3.6.1.4.1.3902.1015.3.1.8.1.1
zxAnIfLoopBackClearAction Clear Management object loop back status. this action means set zxAnIfLoopBackStatus value to normal.	Enumerationr/w Enumerated Values: 1 clear	.1.3.6.1.4.1.3902.1015.3.1.8.1.2

This table includes the ethernet-switch port Protect,for all vdsl card.

zxAnEtherVdslPortProtectEntry row .1.3.6.1.4.1.3902.1015.3.1.9.7.1

An entry in zxAnEtherVdslPortProtectTable.

Indexes

zxAnEtherVdslPortProtectId

Column	Syntax	OID
zxAnEtherVdslPortProtectId The Port Protect id.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.3902.1015.3.1.9.7.1.1
zxAnEtherVdslPortProtectVlanId The Vlan Id.	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.3902.1015.3.1.9.7.1.2
zxAnEtherVdslPortProtectEnable Enable or disable the ethernet switch Port protect for Vdsl card.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.9.7.1.3
zxAnEtherVdslPortProtRowStatus Rowstatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.9.7.1.10

This table provides one row for each interface loopback test.

zxAnIfLoopBackTestEntry row .1.3.6.1.4.1.3902.1015.3.1.11.1

DSL line loopback test information entry

Indexes

zxAnIfLoopBackTestRack zxAnIfLoopBackTestShelf zxAnIfLoopBackTestSlot zxAnIfLoopBackTestPort zxAnIfLoopBackTestBridgePort

Column	Syntax	OID
zxAnIfLoopBackTestRack Rack number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.1
zxAnIfLoopBackTestShelf Shelf number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.2
zxAnIfLoopBackTestSlot Slot number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.3
zxAnIfLoopBackTestPort The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.4
zxAnIfLoopBackTestBridgePort bridge port index. eg.It is PVC ID in ADSL port. If the test is only in the physical port,then this fileds will be 0	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.5
zxAnIfLoopBackTestType This is loop test action expected. NOTES:	Enumerationr/w Enumerated Values: 0 noOper 1 cancle 2 f4end 3 f4segment 4 f5end 5 f5segment	.1.3.6.1.4.1.3902.1015.3.1.11.1.6
zxAnIfLoopBackTestOperStatus This is loop test operational status. Note: if zxAnIfLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3).	Enumeration Enumerated Values: 0 neverExcute 1 excuting 2 excuted 3 faliedToCommit	.1.3.6.1.4.1.3902.1015.3.1.11.1.7
zxAnIfLoopBackTestResult This is loop test result and includes reasons for test failures.	Enumeration Enumerated Values: 0 noResult 1 success 2 generalFailed 3 noSupport 4 unkown 5 noSuchPort 6 loopBackFailed 7 portNotActive 8 portInTesting 9 portInService 10 portFailures 11 cardFailures 12 noPvcFound 13 unknownTestType	.1.3.6.1.4.1.3902.1015.3.1.11.1.8
zxAnIfLoopBackTestConfSendCells The count of cells will be sent in the loopback test.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.9
zxAnIfLoopBackTestRstRecvCells The count of recived cells in the loopback test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.11.1.10
zxAnIfLoopBackTestRowStatus Loop test table RowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.11.1.15

This table includes the queue performance Stat.

zxAnEtherIfQueueStatEntry row .1.3.6.1.4.1.3902.1015.3.1.12.1

An entry in zxAnEtherIfQueueStatTable.

Indexes

IF-MIBifIndex zxAnEtherIfQueueNo

Column	Syntax	OID
zxAnEtherIfQueueNo The queeue number of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.12.1.1
zxAnEtherIfQueueInOctets The total number of octets received on the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.2
zxAnEtherIfQueueInPkts The total number of packets received on the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.3
zxAnEtherIfQueueOutOctets The total number of octets transmitted out of the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.4
zxAnEtherIfQueueOutPkts The total number of packets transmitted out of the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.5
zxAnEtherIfQueueDropOctets The total number of octets droped in the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.6
zxAnEtherIfQueueDropPkts The total number of packets droped in the queue of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.3.1.12.1.7

This table provides objects to monitor optical module
in a network element. It also provides
objects for setting high and low threshold levels.

zxAnOpticalModuleMonEntry row .1.3.6.1.4.1.3902.1015.3.1.13.1

An entry in zxAnOpticalModuleMonTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnOpticalPowerRxCurrValue The optical power monitored at the input. Value 0x7fffffff means unsupported.	0.001dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.1
zxAnOpticalPowerRxLowerThresh The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalPowerRxCurrValue is lower than this threshold.	0.1dbmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.2
zxAnOpticalPowerRxUpperThresh The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalPowerRxCurrValue exceeds this threshold.	0.1dbmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.3
zxAnOpticalPowerTxCurrValue The optical power monitored at the output. Value 0x7fffffff means unsupported.	0.001dbmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.4
zxAnOpticalPowerTxLowerThresh The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalPowerTxCurrValue is lower than this threshold.	0.1dbmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.5
zxAnOpticalPowerTxUpperThresh The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalPowerTxCurrValue exceeds this threshold.	0.1dbmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.6
zxAnOpticalIfRxRate The optical modules interface rate at the input.	0.1Gb/sSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.7
zxAnOpticalIfTxRate The optical modules interface rate at the output.	0.1Gb/sSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.8
zxAnOpticalBiasCurrent The optical modules bias current . Value 0x7fffffff means unsupported.	0.001mASNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.9
zxAnOpticalSupplyVoltage The optical modules supply voltage. Value 0x7fffffff means unsupported.	0.001 VoltsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.10
zxAnOpticalWavelength The optical modules wavelength. Value 0x7fffffff means unsupported.	nmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.11
zxAnOpticalTemperature The optical modules temperature . Value 0x7fffffff means unsupported.	0.001DegreesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.12
zxAnOpticalVenderPn The optical modules vender P/N. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.13
zxAnOpticalVenderName The optical modules vender name. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.14
zxAnOpticalBiasCurrLowerThresh The lower limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold.	0.1mAInteger32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.3902.1015.3.1.13.1.51
zxAnOpticalBiasCurrUpperThresh The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold.	0.1mAInteger32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.3902.1015.3.1.13.1.52
zxAnOpticalVoltageLowerThresh The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold.	0.1 VoltInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.13.1.53
zxAnOpticalVoltageUpperThresh The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold.	0.1 VoltInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.13.1.54
zxAnOpticalTempLowerThresh The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.	CentigradeInteger32r/w Constraints: range: -50-100	.1.3.6.1.4.1.3902.1015.3.1.13.1.55
zxAnOpticalTempUpperThresh The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.	CentigradeInteger32r/w Constraints: range: -50-100	.1.3.6.1.4.1.3902.1015.3.1.13.1.56
zxAnOpticalIfRate The optical module interface rate. Value 0x7fffffff means unsupported.	0.1GbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.13.1.57
zxAnOpticalFiberType The optical module Fiber Type.	Enumeration Enumerated Values: 1 singleMode 2 multiMode 3 unknown	.1.3.6.1.4.1.3902.1015.3.1.13.1.58
zxAnOpticalVersionLevel The optical module vension Level. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.59
zxAnOpticalVendorSn The optical module vender sn. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.60
zxAnOpticalProductionDate The optical module production date. Empty string means unsupported.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.3902.1015.3.1.13.1.61
zxAnOpticalModuleType The optical module type. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.62
zxAnOpticalFiberInterfaceType The optical fiber interface. Empty string means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.63
zxAnOpticalMaterialNumber The material number of pin(A2). The string which is composed of 'f' means unsupported.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.3902.1015.3.1.13.1.64
zxAnOpticalRegisterData The optical module data is from register. The string which is composed of 'f' means unsupported.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.3902.1015.3.1.13.1.65

The COM port table.

zxAnComPortEntry row .1.3.6.1.4.1.3902.1015.3.1.14.2.1.1

An entry in the COM port table .

Indexes

zxAnComPortIfIndex

Column	Syntax	OID
zxAnComPortIfIndex The index of the COM port.	ZTE-AN-TC-MIBZxAnIfindex	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.1
zxAnComPortConfigType The config type of the COM port.	Enumerationr/w Enumerated Values: 1 rs232 2 rs485	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.2
zxAnComPortFlowControl The flow control of the COM port.	Enumerationr/w Enumerated Values: 1 none 2 rtsCts	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.3
zxAnComPortCommMode The communication mode of the COM port. ipAndPort (1) - The COM port will send and receive message with the specified IP and port. virtualComPort (2) - The COM port will be managed a…	Enumerationr/w Enumerated Values: 1 ipAndPort 2 virtualComPort	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.4
zxAnComPortIpCommProtocol The protocol of the COM port communication in ipAndPort mode.	Enumerationr/w Enumerated Values: 1 udp 2 tcpServer 3 tcpClient	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.5
zxAnComLocalTcpUdpPort The local TCP/UDP port for the COM port communication.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.6
zxAnComPortPeerIpAddress The peer IP address for the COM port communication.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.7
zxAnComPortPeerTcpUdpPort The TCP/UDP port for the COM port communication.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.8
zxAnComPortEncryptionMode The encryption mode for the COM port communication.	Enumerationr/w Enumerated Values: 1 none 2 md5	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.9
zxAnComPortCacheDataEnable The cache ability while reading data from the COM port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.10
zxAnComPacketTransmitSize The packet size condition while transmitting packet. The packet will be transmitted once this size satisfied.	bytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.11
zxAnComPacketTransmitInterval The interval condition while transmitting packet. The packet will be transmitted once the time satisfied.	msSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.12
zxAnComPortAdminMode The mode of COM port. discovered(1) - The COM port will be discovered with broadcast by the manager. report(2) - The COM port will report itself to the manager.	Enumerationr/w Enumerated Values: 1 discovered 2 report	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.13
zxAnComPortReportIpType The remote manager ip address address type such as IPv4 or IPv6.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.14
zxAnComPortReportIp The remote manager ip address of COM port in report mode.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.15
zxAnComPortReportPort The remote manager TCP/IP port of COM port in report mode.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.16
zxAnComPortVlanId The VLAN ID is used to transfer COM package. Value 0 means no VLAN ID is specified.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.17

A list of Ethernet statistics entries.

zxAnEthHisStatsEntry row .1.3.6.1.4.1.3902.1015.3.1.15.1

A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherHistStatsPkts object might be named etherHistStatsPkts.1

Indexes

zxAnEthHisStatsIndex

Column	Syntax	OID
zxAnEthHisStatsIndex The value of this object uniquely identifies this etherHistStats entry.	ZTE-AN-TC-MIBZxAnIfindex	.1.3.6.1.4.1.3902.1015.3.1.15.1.1
zxAnEthHisDropEvents The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has b…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.2
zxAnEthHisInOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.3
zxAnEthHisInPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.4
zxAnEthHisInBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.5
zxAnEthHisInMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.6
zxAnEthHisInCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.7
zxAnEthHisInUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.8
zxAnEthHisInOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.9
zxAnEthHisInFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.10
zxAnEthHisInJabbers The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.11
zxAnEthHisCollisions The best estimate of the total number of collisions on this Ethernet segment.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.12
zxAnEthHisInPkts64Octets The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.13
zxAnEthHisInPkts65to127Octets The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.14
zxAnEthHisInPkts128to255Octets The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.15
zxAnEthHisInPkts256to511Octets The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.16
zxAnEthHisInPkts512to1023Octets The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.17
zxAnEthHisInPkts1024to1518Octets The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.15.1.18

A list of interface entries.  The number of entries is
given by the value of ifNumber.  This table contains
additional objects for the interface table.

zxAnIfXHisEntry row .1.3.6.1.4.1.3902.1015.3.1.16.1

An entry containing additional management information
applicable to a particular interface.

Indexes

zxAnIfXHisIndex

Column	Syntax	OID
zxAnIfXHisIndex The value of this object uniquely identifies this etherHisStats entry.	ZTE-AN-TC-MIBZxAnIfindex	.1.3.6.1.4.1.3902.1015.3.1.16.1.1
zxAnIfXHisInOctets The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initializat…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.2
zxAnIfXHisInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.3
zxAnIfXHisInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. T…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.4
zxAnIfXHisInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinu…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.5
zxAnIfXHisOutOctets The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-ini…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.6
zxAnIfXHisOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Thi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.7
zxAnIfXHisOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.8
zxAnIfXHisOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.16.1.9

A list of interface entries.  The number of entries is
given by the value of ifNumber.

zxAnIfHisEntry row .1.3.6.1.4.1.3902.1015.3.1.17.1

An entry containing management information applicable to a
particular interface.

Indexes

zxAnIfHisIndex

Column	Syntax	OID
zxAnIfHisIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	ZTE-AN-TC-MIBZxAnIfindex	.1.3.6.1.4.1.3902.1015.3.1.17.1.1
zxAnIfHisInOctets The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.2
zxAnIfHisInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.3
zxAnIfHisInNUcastPktsdeprecated The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occ…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.4
zxAnIfHisInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.5
zxAnIfHisInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of i…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.6
zxAnIfHisInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.7
zxAnIfHisOutOctets The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.8
zxAnIfHisOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.10
zxAnIfHisOutNUcastPktsdeprecated The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.11
zxAnIfHisOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.12
zxAnIfHisOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.13
zxAnIfHisOutQueueLengthdeprecated The length of the output packet queue (in packets).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1015.3.1.17.1.14

Interface VLAN rate limit information table.

zxAnIfVlanRateLimitEntry row .1.3.6.1.4.1.3902.1015.3.1.20.1

A entry of this table.

Indexes

zxAnIfVlanRateLimitIfIndex zxAnIfVlanRateLimitVlanId zxAnIfVlanRateLimitDirection

Column	Syntax	OID
zxAnIfVlanRateLimitIfIndex The index of this interface VLAN rate limit table.	ZTE-AN-TC-MIBZxAnIfindex	.1.3.6.1.4.1.3902.1015.3.1.20.1.1
zxAnIfVlanRateLimitVlanId The VLAN ID.	ZTE-AN-TC-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.3902.1015.3.1.20.1.2
zxAnIfVlanRateLimitDirection The VLAN rate limit direction.	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1015.3.1.20.1.3
zxAnIfVlanRateLimitCir The committed information rate.	kbpsInteger32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.3902.1015.3.1.20.1.4
zxAnIfVlanRateLimitPir The peak information rate.	kbpsInteger32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.3902.1015.3.1.20.1.5
zxAnIfVlanRateLimitRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.20.1.30

The global protocol rate limiting table.
This table specifies protocol rate limiting configuration, 
which is used to reduce the maximum traffic rate for 
each protocol such as DHCP, IGMP, ICMP and so on.
This table supports get-next from first-class index.

zxAnProtoRateLimitGlobalEntry row .1.3.6.1.4.1.3902.1015.3.1.21.1.1

The protocol rate limiting entry.

Indexes

zxAnProtoRateLimitGlbIfType zxAnProtoRateLimitGlbProtoType

Column	Syntax	OID
zxAnProtoRateLimitGlbIfType Supported interface type.	Enumeration Enumerated Values: 1 vport	.1.3.6.1.4.1.3902.1015.3.1.21.1.1.1
zxAnProtoRateLimitGlbProtoType Supported protocol type.	ProtoRateLimitType Type Values: 1 arp 2 dhcpv4 3 dhcpv6 4 igmp 5 pppoe 6 cfm 7 nd 8 mld 9 broadcastAndFlood 10 icmp	.1.3.6.1.4.1.3902.1015.3.1.21.1.1.2
zxAnProtoRateLimitGlbIngress The packet rate limit egress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.1.1.3
zxAnProtoRateLimitGlbEgress The packet rate limit ingress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.1.1.4

The valn protocol rate limiting table.
This table specifies protocol rate limiting configuration, 
which is used to reduce the maximum traffic rate for 
each protocol such as DHCP, IGMP, ICMP and so on.
This table supports get-next without index.

zxAnProtocolRateLimitVlanEntry row .1.3.6.1.4.1.3902.1015.3.1.21.2.1

The protocol rate limiting entry.

Indexes

zxAnProtoRateLmtVlanId zxAnProtoRateLmtVlanProtoType

Column	Syntax	OID
zxAnProtoRateLmtVlanId The VLAN ID.	ZTE-AN-TC-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.3902.1015.3.1.21.2.1.1
zxAnProtoRateLmtVlanProtoType Supported Protocol Type.	ProtoRateLimitType Type Values: 1 arp 2 dhcpv4 3 dhcpv6 4 igmp 5 pppoe 6 cfm 7 nd 8 mld 9 broadcastAndFlood 10 icmp	.1.3.6.1.4.1.3902.1015.3.1.21.2.1.2
zxAnProtoRateLmtVlanIngress The packet rate limit ingress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.2.1.3
zxAnProtoRateLmtVlanEgress The packet rate limit egress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.2.1.4
zxAnProtoRateLmtVlanRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.21.2.1.50

The global protocol rate limiting table.
This table specifies protocol rate limiting configuration, 
which is used to reduce the maximum traffic rate for 
each protocol such as DHCP, IGMP, ICMP and so on.
This table supports get-next from 'zxAnProtoRateLimitIfPort' index.

zxAnProtocoRateLimitIfEntry row .1.3.6.1.4.1.3902.1015.3.1.21.3.1

The vport protocol rate limiting entry.

Indexes

zxAnProtoRateLimitIfRack zxAnProtoRateLimitIfShelf zxAnProtoRateLimitIfSlot zxAnProtoRateLimitIfPort zxAnProtoRateLimitIfOnu zxAnProtoRateLimitIfLogicId zxAnProtoRateLimitIfProtoType

Column	Syntax	OID
zxAnProtoRateLimitIfRack This object indicates the rack number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.1
zxAnProtoRateLimitIfShelf This object indicates the shelf number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.2
zxAnProtoRateLimitIfSlot This object indicates the slot number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.3
zxAnProtoRateLimitIfPort This object indicates the physical port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.4
zxAnProtoRateLimitIfOnu This object indicates the ONU number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.5
zxAnProtoRateLimitIfLogicId This Logical id of means vport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.6
zxAnProtoRateLimitIfProtoType Supported Protocol Type.	ProtoRateLimitType Type Values: 1 arp 2 dhcpv4 3 dhcpv6 4 igmp 5 pppoe 6 cfm 7 nd 8 mld 9 broadcastAndFlood 10 icmp	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.7
zxAnProtoRateLimitIfIngress The packet rate limit ingress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.8
zxAnProtoRateLimitIfEgress The packet rate egress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.9
zxAnProtoRateLimitIfRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.21.3.1.50

The global protocol rate limiting table.
This table specifies protocol rate limiting configuration, 
which is used to reduce the maximum traffic rate for 
each protocol such as DHCP, IGMP, ICMP and so on.
This table support get-next from 'zxAnProtoRateLmtIfVlanPort' index.

zxAnProtocoRateLmtIfVlanEntry row .1.3.6.1.4.1.3902.1015.3.1.21.4.1

The vport protocol rate limiting entry.

Indexes

zxAnProtoRateLmtIfVlanRack zxAnProtoRateLmtIfVlanShelf zxAnProtoRateLmtIfVlanSlot zxAnProtoRateLmtIfVlanPort zxAnProtoRateLmtIfVlanOnu zxAnProtoRateLmtIfVlanLogicId zxAnProtoRateLmtIfVlanVlanId zxAnProtoRateLmtIfVlanProtoType

Column	Syntax	OID
zxAnProtoRateLmtIfVlanRack This object indicates the rack number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.1
zxAnProtoRateLmtIfVlanShelf This object indicates the shelf number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.2
zxAnProtoRateLmtIfVlanSlot This object indicates the slot number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.3
zxAnProtoRateLmtIfVlanPort This object indicates the physical port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.4
zxAnProtoRateLmtIfVlanOnu This object indicates the ONU number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.5
zxAnProtoRateLmtIfVlanLogicId This Logical id of means vport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.6
zxAnProtoRateLmtIfVlanVlanId The VLAN ID.	ZTE-AN-TC-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.7
zxAnProtoRateLmtIfVlanProtoType Supported Protocol Type.	ProtoRateLimitType Type Values: 1 arp 2 dhcpv4 3 dhcpv6 4 igmp 5 pppoe 6 cfm 7 nd 8 mld 9 broadcastAndFlood 10 icmp	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.8
zxAnProtoRateLmtIfVlanIngress The packet rate limit ingress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.9
zxAnProtoRateLmtIfVlanEgress The packet rate limit egress value. 0xFFFF means unconfigured.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.10
zxAnProtoRateLmtIfVlanRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.21.4.1.50

The supported protocol rate limiting table.
This table specifies which kinds of information on protocol type,
rate limiting scale and unit are supported for current device.

zxAnSupportedRateLimitEntry row .1.3.6.1.4.1.3902.1015.3.1.21.50.1

The supported protocol rate limiting entry.

Indexes

zxAnSupportedRateLimitScale zxAnSupportedProtocolType

Column	Syntax	OID
zxAnSupportedRateLimitScale Supported Protocol Rate Limiting Scale.	RateLimitScale Type Values: 1 vportGlobal 2 vlan 3 vport 4 vportAndVlan	.1.3.6.1.4.1.3902.1015.3.1.21.50.1.1
zxAnSupportedProtocolType Supported Protocol Type.	ProtoRateLimitType Type Values: 1 arp 2 dhcpv4 3 dhcpv6 4 igmp 5 pppoe 6 cfm 7 nd 8 mld 9 broadcastAndFlood 10 icmp	.1.3.6.1.4.1.3902.1015.3.1.21.50.1.2
zxAnSupportedRateLimitDirection The VLAN rate limit direction.	Enumeration Enumerated Values: 1 both 2 ingress 3 egress	.1.3.6.1.4.1.3902.1015.3.1.21.50.1.3
zxAnSupportedRateLimitUnits Supported unit type of rate for a specific protocol.	Enumeration Enumerated Values: 1 pps	.1.3.6.1.4.1.3902.1015.3.1.21.50.1.4

The interface protocol transparent table.
This table specifies that interface transparent 
transmits protocol.
This table supports get-next from 'zxAnIfProtocolTransIfType' 
index.

zxAnIfProtocolTransEntry row .1.3.6.1.4.1.3902.1015.3.1.22.1.1

The interface protocol transparent entry.

Indexes

zxAnIfProtocolTransRack zxAnIfProtocolTransShelf zxAnIfProtocolTransSlot zxAnIfProtocolTransPort zxAnIfProtocolTransOnu zxAnIfProtocolTransIfType zxAnIfProtocolTransLogicalId zxAnIfProtocolTransType

Column	Syntax	OID
zxAnIfProtocolTransRack Rack No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.1
zxAnIfProtocolTransShelf Shelf No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.2
zxAnIfProtocolTransSlot Slot No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.3
zxAnIfProtocolTransPort Physical port No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.4
zxAnIfProtocolTransOnu The ONU number. It is 0 in DSL port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.5
zxAnIfProtocolTransIfType Type of the interface.	Enumeration Enumerated Values: 1 physicalPort 2 bridgePort 3 ponOnu 4 ponVPort 5 onuUni 11 servicePort 12 vlan	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.6
zxAnIfProtocolTransLogicalId Logic index of the interface. If zxAnIfTransProtocolIfType is 'physicalPort', its value is 0. If zxAnIfTransProtocolIfType is 'bridgePort', this object indicates 'pvc', such as oid '1' indi…	ObjectIdentifier	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.7
zxAnIfProtocolTransType The transparent protocol type.	Enumeration Enumerated Values: 1 osfpAndRip	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.8
zxAnIfProtocolTransRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.22.1.1.20

This table includes the optical module threshold profile. 
It can be configured up to 32,which one is the default profile.

zxAnOpticalModuleAlmPrfEntry row .1.3.6.1.4.1.3902.1015.3.1.23.2.1

An entry in zxAnOpticalModuleAlmPrfTable.

Indexes

zxAnOptPrfModuleAlmPrfName

Column	Syntax	OID
zxAnOptPrfModuleAlmPrfName A textual string containing information about the optical module alarm threshold profile name. It can be configured up to 32 profiles,which one is the default profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.1
zxAnOptPrfRxPwrLowerThresh The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The default value is -340.	0.1dBmInteger32r/w Constraints: range: -400-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.2
zxAnOptPrfRxPwrUpperThresh The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold.The default value is 30.	0.1dBmInteger32r/w Constraints: range: -400-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.3
zxAnOptPrfTxPwrLowerThresh The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The default value is -140.	0.1dbmInteger32r/w Constraints: range: -200-200	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.4
zxAnOptPrfTxPwrUpperThresh The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold.The default value is 90.	0.1dbmInteger32r/w Constraints: range: -200-200	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.5
zxAnOptPrfBiasCurrLowerThresh The lower limit threshold on optical modules bias current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The default value is 0.	0.1mAInteger32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.6
zxAnOptPrfBiasCurrUpperThresh The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold.The default value is 1310.	0.1mAInteger32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.7
zxAnOptPrfVoltageLowerThresh The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold.The default value is 0.	0.1 VoltInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.8
zxAnOptPrfVoltageUpperThresh The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold.The default value is 70.	0.1 VoltInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.9
zxAnOptPrfTempLowerThresh The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.The default value is -45.	CentigradeInteger32r/w Constraints: range: -50-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.10
zxAnOptPrfTempUpperThresh The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.The default value is 90.	CentigradeInteger32r/w Constraints: range: -50-100	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.11
zxAnOptPrfOfflineTrapEnable Indicates whether optical module is online/offline traps should be generated for this interface.The default value is enabled(1)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.12
zxAnOptPrfModuleAlmPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.3.1.23.2.1.50