ZTE-AN-IMA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
30

zxAnImaGroupTable

table
.1.3.6.1.4.1.3902.1015.1005.1.1 · 1 row entry · 22 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnImaGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IMA-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IMA-MIB::zxAnImaGroupTable' 
xDslImaGroup interface table.
zxAnImaGroupEntry row .1.3.6.1.4.1.3902.1015.1005.1.1.1
Ima Group interface create entry.It is used to create or remove a
ima goup interface.

NOTE:
zxAnImaLinkGroupIfIndex of zxAnImaLinkTable MUST be set before
creating a IMA group,because IMA group must in…
Indexes
Column Syntax OID
zxAnImaShelf
Shelf of IMA card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.1
zxAnImaSlot
Slot of IMA card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.2
zxAnImaGroupIndex
IMA Group Index in this IMA card.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.3
zxAnImaGroupConfImaVersion
The configured version of Group,ima 1.0 or ima 1.1 .
Enumerationr/w
Enumerated Values:
1version10
2version11
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.4
zxAnImaGroupActualImaVersion
The actual version of Group,ima 1.0 or ima 1.1 .
Enumerationr/w
Enumerated Values:
1version10
2version11
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.5
zxAnImaGroupSymmetry
Symmetry of the IMA group.
ImaGroupSymmetryr/w
Type Values:
1symmetricOperation
2asymmetricOperation
3asymmetricConfiguration
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.6
zxAnImaGroupM2SClkMode
The clock mode of master to slave for the Group
Enumerationr/w
Enumerated Values:
1master
2slave
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.7
zxAnImaGroupNeTxClkMode
Transmit clocking mode used by the near-end IMA group.
ImaGroupTxClkModer/w
Type Values:
1ctc
2itc
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.8
zxAnImaGroupFeTxClkMode
Transmit clocking mode used by the far-end IMA group.
ImaGroupTxClkMode
Type Values:
1ctc
2itc
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.9
zxAnImaGroupTxFrameLength
The frame length to be used by the IMA group in the transmit
direction.
ImaFrameLengthr/w
Type Values:
32m32
64m64
128m128
256m256
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.10
zxAnImaGroupRxFrameLength
The frame length to be used by the IMA group in the recieving
direction.
ImaFrameLength
Type Values:
32m32
64m64
128m128
256m256
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.11
zxAnImaGroupAdminStatus
Administrative status of IMA group.
When it is set to reset(3),the agent should reset this IMA group
and then set it to its previous status.
Enumerationr/w
Enumerated Values:
1up
2down
3reset
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.12
zxAnImaGroupOperstatus
Operational status of IMA group.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.13
zxAnImaGroupNeState
The current operational state of the near-end IMA Group.
ImaGroupState
Type Values:
1notConfigured
2startUp
3startUpAck
4configAbortUnsupportedM
5configAbortIncompatibleSymmetry
6configAbortOther
7insufficientLinks
8blocked
9operational
10configAbortUnsupportedImaVersion
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.14
zxAnImaGroupFeState
The current operational state of the far-end IMA Group.
ImaGroupState
Type Values:
1notConfigured
2startUp
3startUpAck
4configAbortUnsupportedM
5configAbortIncompatibleSymmetry
6configAbortOther
7insufficientLinks
8blocked
9operational
10configAbortUnsupportedImaVersion
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.15
zxAnImaGroupDsx1LineType
This variable indicates the variety of E1 Line implementing
this circuit. The type of circuit affects the number of bits
per second that the circuit can reasonably carry, as well as
the interpretation of the usage and e…
Enumerationr/w
Enumerated Values:
4dsx1E1
6dsx1E1MF
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.16
zxAnImaGroupDsx1LineCoding
This variable describes the variety of Zero Code suppression
used on this link, which in turn affects a number of its
characteristics. ami(4) refers to a mode wherein no zero
code suppression is present and the line enc…
Enumerationr/w
Enumerated Values:
1singleRail
2hdb3
3b8zs
4ami
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.17
zxAnImaGroupDsx1TxClockSource
The source of the transmit clock. loopTiming(1) indicated that
the recovered receive clock is used as the transmit clock.
localTiming(2) indicates that a local source clock is used as
the transmit clock. To determine wh…
Enumerationr/w
Enumerated Values:
1loopTiming
2localTiming
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.18
zxAnImaGroupDsx1IdleCells
This variable indicates the types of cells that should be sent
in case there is no real data to send. According to the ATM
Forum, Unassigned cells should be sent (octet 1-3 are 0's,
octet 4 is 0000xxx0, where x is 'don'…
Enumerationr/w
Enumerated Values:
1unassigned
2idle
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.19
zxAnImaGroupDsx1RxScrambling
This variable indicates whether the information is being
descrambled on receiving. It should be set the same as the
transmitting side.
Enumerationr/w
Enumerated Values:
1descrambling
2noDescrambling
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.20
zxAnImaGroupDsx1TxScrambling
This variable indicates whether the information (48 octet
payload) is being scrambled before transmitting. It should
be set the same as the receiving side.
Enumerationr/w
Enumerated Values:
1scrambling
2noScrambling
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.21
zxAnImaGroupRowStatus
This object is used to create, delete the ima group interface
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.1005.1.1.1.22

zxAnImaLinkTable

table
.1.3.6.1.4.1.3902.1015.1005.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnImaLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IMA-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IMA-MIB::zxAnImaLinkTable' 
xDsl zxAnImaLink interface table.
zxAnImaLinkEntry row .1.3.6.1.4.1.3902.1015.1005.1.2.1
Ima link interface create entry.It is used to create or remove a
ima link interface.
Indexes
Column Syntax OID
zxAnImaLinkId
A unique value for the IMA port on this card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.1
zxAnImaLinkGroupIndex
The IMA group index that this link joined.If the link doesn't join
any ima group,this value is 255 (0xff).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.2
zxAnImaLinkNeTxAdminStatus
The administrative status of IMA link near-end transmission.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.3
zxAnImaLinkNeRxState
The current state of the near-end receive link.
ImaLinkState
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.4
zxAnImaLinkNeTxState
The current state of the near-end transmit link.
ImaLinkState
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.5
zxAnImaLinkFeRxState
The current state of the far-end receive link.
ImaLinkState
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.6
zxAnImaLinkFeTxState
The current state of the far-end transmit link.
ImaLinkState
Type Values:
1notInGroup
2unusableNoGivenReason
3unusableFault
4unusableMisconnected
5unusableInhibited
6unusableFailed
7usable
8active
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.7
zxAnImaLinkLoopback
Loopback this link or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1005.1.2.1.8