ZTE-AN-IEEE1588-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
49

zxAnPtpTable

table
.1.3.6.1.4.1.3902.1015.66.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IEEE1588-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IEEE1588-MIB::zxAnPtpTable' 
This table includes PTP configuration information in NE 
equipment.
zxAnPtpEntry row .1.3.6.1.4.1.3902.1015.66.1.2.1
An entry in zxAnPtpTable.
Indexes
Column Syntax OID
zxAnPtpRack
This object indicates the rack number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.1.2.1.1
zxAnPtpShelf
This object indicates the shelf number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.1.2.1.2
zxAnPtpSlot
This object indicates the slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.1.2.1.3
zxAnPtpId
The PTP node ID.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.3902.1015.66.1.2.1.4
zxAnPtpClockType
The value of clock type shall indicate the type of PTP node
as defined in table 42 of IEEE1588-2008.
Enumerationr/w
Enumerated Values:
1ordinary
2boundary
 .1.3.6.1.4.1.3902.1015.66.1.2.1.5
zxAnPtpSlaveOnly
The value of defaultDS.slaveOnly shall be TRUE if the clock
is a slave-only clock; see 9.2.2.
The value shall be FALSE if the clock is a non-slave-only
clock;
see 9.2.3 of IEEE1588-2008.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.66.1.2.1.6
zxAnPtpDomainNumber
The value of defaultDS.domainNumber is the domain attribute
(see 7.1 of IEEE1588-2008) of the local clock.
Value 0 indicates the default domain.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.66.1.2.1.7
zxAnPtpProtocolIpAddrType
This object indicates the type of IP address denoted
in zxAnPtpProtocolIpAddress object.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.66.1.2.1.8
zxAnPtpProtocolIpAddress
The value of protocolAddress shall be the protocol address
of the port indicated by the targetPortIdentity.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.66.1.2.1.9
zxAnPtpEthWorkMode
The PTP node ethernet work mode.
Enumerationr/w
Enumerated Values:
1syncE
2notSyncE
 .1.3.6.1.4.1.3902.1015.66.1.2.1.10
zxAnPtpPacketsMode
The PTP node packets mode.
Enumerationr/w
Enumerated Values:
1unicast
2multicast
3broadcast
 .1.3.6.1.4.1.3902.1015.66.1.2.1.11
zxAnPtpTwoStepFlag
The value of defaultDS.twoStepFlag shall be TRUE
if the clock is a two-step clock;
otherwise, the value shall be FALSE.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.66.1.2.1.12
zxAnPtpSendPacketsRate
The sending packets rate of PTP node.
The value should be 2^n, such as 1, 2, 4, 8, 16
and so on.
ppsInteger32r/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.3902.1015.66.1.2.1.13
zxAnPtpClockStatus
State of the clock servo loop.
Enumeration
Enumerated Values:
1freeRun
2holdover
3acquisition
4locked
 .1.3.6.1.4.1.3902.1015.66.1.2.1.14
zxAnPtpUtcTime
The UTC time of PTP node. The format is
yyyy-mm-dd HH:MM:SS.For example, 2001-01-01 02:22:33.
OctetString
Constraints:
range: 1-19
 .1.3.6.1.4.1.3902.1015.66.1.2.1.15
zxAnPtpRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.66.1.2.1.50

zxAnPtpRemoteSrcTable

table
.1.3.6.1.4.1.3902.1015.66.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPtpRemoteSrcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IEEE1588-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IEEE1588-MIB::zxAnPtpRemoteSrcTable' 
This table includes PTP source configuration information
in NE equipment.
zxAnPtpRemoteSrcEntry row .1.3.6.1.4.1.3902.1015.66.1.3.1
An entry in zxAnPtpRemoteSrcTable.
Indexes
Column Syntax OID
zxAnPtpRemoteSrcIpAddrType
This object indicates the type of IP address denoted
in zxAnPtpRemoteSrcIpAddress object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.66.1.3.1.1
zxAnPtpRemoteSrcIpAddress
The PTP source IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.66.1.3.1.2
zxAnPtpRemoteSrcDomainNumber
The value of defaultDS.domainNumber is the domain attribute
(see 7.1 of IEEE1588-2008) of the local clock.
Value 0 indicates the default domain.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.66.1.3.1.3
zxAnPtpRemoteSrcPathDelayAdjust
The value of currentDS.meanPathDelay is an
implementation-specific representation of the
current value of the mean propagation time between
a master and slave clock as computed by the slave.
nsInteger32r/w
Constraints:
range: -1000000-1000000
 .1.3.6.1.4.1.3902.1015.66.1.3.1.4
zxAnPtpRemoteSrcWorkStatus
The remote PTP source work status,
active(2) indicates PTP source is active,
standby(3) indicates PTP source is standby source,
none(1) indicates PTP source is invalid.
Enumeration
Enumerated Values:
1none
2active
3standby
 .1.3.6.1.4.1.3902.1015.66.1.3.1.5
zxAnPtpRemoteSrcRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.66.1.3.1.50

zxAnSyncTime1ppsSrcTable

table
.1.3.6.1.4.1.3902.1015.66.2.3 · 1 row entry · 12 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnSyncTime1ppsSrcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IEEE1588-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IEEE1588-MIB::zxAnSyncTime1ppsSrcTable' 
This table includes 1PPS source information in NE 
equipment.
zxAnSyncTime1ppsSrcEntry row .1.3.6.1.4.1.3902.1015.66.2.3.1
An entry in zxAnSyncTime1ppsSrcTable.
Indexes
Column Syntax OID
zxAnSyncTime1ppsSrcRack
This object indicates the rack number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.3.1.1
zxAnSyncTime1ppsSrcShelf
This object indicates the shelf number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.3.1.2
zxAnSyncTime1ppsSrcSlot
This object indicates the slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.3.1.3
zxAnSyncTime1ppsSrcId
The ID of 1PPS signal source.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.3902.1015.66.2.3.1.4
zxAnSyncTime1ppsSrcSignalType
The type of 1PPS signal source.
Enumerationr/w
Enumerated Values:
1ptp
2onepps
 .1.3.6.1.4.1.3902.1015.66.2.3.1.5
zxAnSyncTime1ppsSrcPriority
The priority of 1PPS signal source, value 1 is the
highest priority.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1015.66.2.3.1.6
zxAnSyncTime1ppsSrcPortType
The 1PPS signal source port type.
It is valid only for the 'onepps' signal type.
Enumerationr/w
Enumerated Values:
1typeTtl
2type422
 .1.3.6.1.4.1.3902.1015.66.2.3.1.7
zxAnSyncTime1ppsSrcPort
The physical port number.
It is valid only for the 'onepps' signal type.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.3902.1015.66.2.3.1.8
zxAnSyncTime1ppsSrcWorkStatus
The 1PPS signal source work status,
active(2) indicates PTP source is active,
standby(3) indicates PTP source is standby source,
none(1) indicates PTP source is invalid.
Enumeration
Enumerated Values:
1none
2active
3standby
 .1.3.6.1.4.1.3902.1015.66.2.3.1.9
zxAnSyncTime1ppsSrcValidStatus
The 1PPS singnal source work status.
When the value is invalid,
then zxAnSyncTime1ppsSrcWorkStatus is none.
Enumeration
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.3902.1015.66.2.3.1.10
zxAnSyncTime1ppsSrcPortStatus
The 1PPS signal source port status.
It is valid only for the 'onepps' signal type.
If zxAnSyncTime1ppsSrcSignalType is 'ptp',
then the value is none.
When the value is none or signalLos, then
zxAnSyncTime1ppsSrcValid…
Enumeration
Enumerated Values:
1none
2normal
3signalLos
 .1.3.6.1.4.1.3902.1015.66.2.3.1.11
zxAnSyncTime1ppsSrcRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.66.2.3.1.30

zxAnSyncTimeTodSrcTable

table
.1.3.6.1.4.1.3902.1015.66.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnSyncTimeTodSrcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IEEE1588-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IEEE1588-MIB::zxAnSyncTimeTodSrcTable' 
This table includes TOD source information in NE 
equipment.
zxAnSyncTimeTodSrcEntry row .1.3.6.1.4.1.3902.1015.66.2.4.1
An entry in zxAnSyncTimeTodSrcTable.
Indexes
Column Syntax OID
zxAnSyncTimeTodSrcRack
This object indicates the rack number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.4.1.1
zxAnSyncTimeTodSrcShelf
This object indicates the shelf number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.4.1.2
zxAnSyncTimeTodSrcSlot
This object indicates the slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.4.1.3
zxAnSyncTimeTodSrcPort
This object indicates the port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.4.1.4
zxAnSyncTimeTodSrcSignalType
The signal type of TOD signal source.
Enumerationr/w
Enumerated Values:
1gps
2chinaMobile
3chinaUnicom
4chinaTelecom
 .1.3.6.1.4.1.3902.1015.66.2.4.1.5
zxAnSyncTimeTodSrcYearAdjust
The year adjustment value of TOD signal source.
It is valid only for the 'gps' signal type.
yearInteger32r/w
Constraints:
range: 0-2050
 .1.3.6.1.4.1.3902.1015.66.2.4.1.6
zxAnSyncTimeTodSrcPortStatus
The TOD signal source port status.
Enumeration
Enumerated Values:
1none
2normal
3signalLos
 .1.3.6.1.4.1.3902.1015.66.2.4.1.7
zxAnSyncTimeTodSrcRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.66.2.4.1.30

zxAnSyncTimeOutputPortTable

table
.1.3.6.1.4.1.3902.1015.66.2.5 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnSyncTimeOutputPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IEEE1588-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IEEE1588-MIB::zxAnSyncTimeOutputPortTable' 
This table includes 1PPS and TOD signal output ports 
information in NE equipment.
zxAnSyncTimeOutputPortEntry row .1.3.6.1.4.1.3902.1015.66.2.5.1
An entry in zxAnSyncTimeOutputPortTable.
Indexes
Column Syntax OID
zxAnSyncTimeOutputRack
This object indicates the rack number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.5.1.1
zxAnSyncTimeOutputShelf
This object indicates the shelf number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.5.1.2
zxAnSyncTimeOutputSlot
This object indicates the slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.5.1.3
zxAnSyncTimeOutputPort
This object indicates the port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.66.2.5.1.4
zxAnSyncTimeOutputPortEnable
Enables or disables the output port of
1PPS and TOD signal.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.66.2.5.1.5
zxAnSyncTimeOutputPortPhaseAdjus
The phase adjustment value.
It is valid only for the 1PPS signal.
nsInteger32r/w
Constraints:
range: -1000000-1000000
 .1.3.6.1.4.1.3902.1015.66.2.5.1.6
zxAnSyncTimeOutputPortRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.66.2.5.1.30