ZTE-AN-EVNET-MIB Table View

A list of trap destination entries.

zxAnEventConfEntry row .1.3.6.1.4.1.3902.1015.190.4.1.1

This entry includes a destination IP address to which traps are
sent for this community.

Indexes

zxAnEventConfTrapOid

Column	Syntax	OID
zxAnEventConfTrapOid Event trap oid.	ObjectIdentifier	.1.3.6.1.4.1.3902.1015.190.4.1.1.1
zxAnEventName The name of an event.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3902.1015.190.4.1.1.2
zxAnEventConfSeverityLevel Severity Level of an event.	Enumerationr/w Enumerated Values: 0 critical 1 major 2 minor 3 warning 4 indeterminate	.1.3.6.1.4.1.3902.1015.190.4.1.1.3

Event control profile table.
When an event is added to profile, interface that the profile 
is applied to will enable the event.

zxAnEventCtrlProfileEntry row .1.3.6.1.4.1.3902.1015.190.4.3.1

Event control profile table entry.

Indexes

zxAnEventCtrlProfileName zxAnEventCode zxAnEventReportChannelType

Column	Syntax	OID
zxAnEventCtrlProfileName Event control profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.190.4.3.1.1
zxAnEventCode Event code.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.3.1.2
zxAnEventReportChannelType Event report channel type.	Enumeration Enumerated Values: 1 snmp 2 extendedOam 3 omci	.1.3.6.1.4.1.3902.1015.190.4.3.1.3
zxAnEventCtrlProfileRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.4.3.1.50

Interface event configuration table.

zxAnEventIfCfgEntry row .1.3.6.1.4.1.3902.1015.190.4.4.1

Interface event configuration table entry.

Indexes

zxAnEventIfCfgRack zxAnEventIfCfgShelf zxAnEventIfCfgSlot zxAnEventIfCfgPort zxAnEventIfCfgOnu zxAnEventIfCfgIfType zxAnEventIfCfgLogicalId

Column	Syntax	OID
zxAnEventIfCfgRack Rack No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.4.1.1
zxAnEventIfCfgShelf Shelf No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.4.1.2
zxAnEventIfCfgSlot Slot No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.4.1.3
zxAnEventIfCfgPort Physical port No. of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.4.1.4
zxAnEventIfCfgOnu The ONU number. It is 0 in DSL port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.4.4.1.5
zxAnEventIfCfgIfType Type of the interface.	Enumeration Enumerated Values: 1 physicalPort 2 bridgePort 3 ponOnu 4 ponVPort 5 onuUni 11 servicePort 12 vlan 255 card	.1.3.6.1.4.1.3902.1015.190.4.4.1.6
zxAnEventIfCfgLogicalId Logic index of the interface. If zxAnEventConfIfType is 'physicalPort', its value is 0. If zxAnEventConfIfType is 'bridgePort', this object indicates 'pvc', such as oid '1' indicates 'PVC1'…	ObjectIdentifier	.1.3.6.1.4.1.3902.1015.190.4.4.1.7
zxAnEventIfCfgMaskEnable Enables or disables to mask a specified event for interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.4.4.1.8
zxAnEventIfCfgProfileName Interface event control profile name. When an event control profile is applied to the interface, the events added to the event control profile will be enabled for the interface.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.190.4.4.1.9
zxAnEventIfCfgRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.4.4.1.50

VLAN event configuration table.

zxAnEventVlanCfgEntry row .1.3.6.1.4.1.3902.1015.190.4.5.1

VLAN event configuration table entry.

Indexes

zxAnEventVlanCfgVlanId

Column	Syntax	OID
zxAnEventVlanCfgVlanId VLAN ID.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1015.190.4.5.1.1
zxAnEventVlanCfgMaskEnable Enables or disables to mask a specified event for VLAN ID.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.4.5.1.2
zxAnEventVlanCfgProfileName VLAN event control profile name. When an event control profile is applied to the VLAN ID, the events added to the event control profile will be enabled for the VLAN ID.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.190.4.5.1.3
zxAnEventVlanCfgRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.4.5.1.50

A list of trap destination entries.

zxAnEventRecieverEntry row .1.3.6.1.4.1.3902.1015.190.5.1.1

This entry includes a destination IP address to which traps are
sent for this community.

Indexes

zxAnEventReceiverIndex

Column	Syntax	OID
zxAnEventReceiverIndex The index of a reciever.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.3902.1015.190.5.1.1.1
zxAnEventReceiverIpAddr The destination address for traps on behalf of this entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3902.1015.190.5.1.1.2
zxAnEventReceiverSnmpVer It is the snmp version which a reciever expects.	Enumerationr/w Enumerated Values: 1 snmpV1 2 snmpV2c 3 snmpV3	.1.3.6.1.4.1.3902.1015.190.5.1.1.3
zxAnEventReceiverCommunity The community that a reciever expects.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.3902.1015.190.5.1.1.4
zxAnEventReceiverEventFormat It is the event format which a reciever expects. Trap is a event sent to manager and no confirm is needed. But inform need the confirm from a manager. The value of snmpTrapForPccw(3) is only supported by PCCW MSAG5200V3.	Enumerationr/w Enumerated Values: 1 snmpTrap 2 snmpInform 3 snmpTrapForPccw	.1.3.6.1.4.1.3902.1015.190.5.1.1.5
zxAnEventReceiverEventType The event type that a reciever expects. The event type are defined in ITU-T X.733. - equipment event type: An event of this type is principally associated with an equipment fault; …	Bitsr/w Enumerated Values: 0 equipmentEvent 1 qualityOfServiceEvent 2 communicationsEvent 3 environmentEvent 4 processingErrorEvent	.1.3.6.1.4.1.3902.1015.190.5.1.1.6
zxAnEventReceiverMinEventLevel The min event level that a reciever expects.If the actual event level is more serious then this value,the event will be sent to Event Reciever. For example,if this value is cleared(5),all the events that the level in…	Enumerationr/w Enumerated Values: 0 critical 1 major 2 minor 3 warning 4 indeterminate 5 cleared 6 notification	.1.3.6.1.4.1.3902.1015.190.5.1.1.7
zxAnEventReceiverEnable Enable or disable a reciever to recieve the event.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.5.1.1.8
zxAnEventReceiverIsZteNmsSever If or not it is a zte's nms. true(1): it is a zte's nms; false(2): it is not a zte's nms.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.190.5.1.1.9
zxAnEventReceiverSecurityLevel A level of security at which SNMP messages can be sent or with which operations are being processed; in particular, one of: noAuthNoPriv - without authentication and without privacy, authNoPriv - with authentication b…	Enumerationr/w Enumerated Values: 1 noAuthNoPriv 2 authNoPriv 3 authPriv	.1.3.6.1.4.1.3902.1015.190.5.1.1.10
zxAnEventReceiverPort The port number of the event receiver.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.1015.190.5.1.1.11
zxAnEventReceiverRowStatus This entry's row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.5.1.1.15

syslog host config table.

zxAnEventSyslogEntry row .1.3.6.1.4.1.3902.1015.190.7.1.1

An entry in zxAnEventSyslogTable.

Indexes

zxAnEventSyslogSvrIpAddr

Column	Syntax	OID
zxAnEventSyslogSvrIpAddr The syslog server ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.1015.190.7.1.1.1
zxAnEventSyslogSvrPort The syslog destination udp port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.7.1.1.2
zxAnEventSyslogType The syslog type that a reciever expects.	Bitsr/w Enumerated Values: 0 cmdlog 1 snmplog 2 debugmsg 3 alarmlog	.1.3.6.1.4.1.3902.1015.190.7.1.1.3
zxAnEventSyslogMinAlarmLevel Enable/Disable the snmp log in syslog.	Enumerationr/w Enumerated Values: 1 major 2 minor 3 warning 4 indeterminate 5 cleared 6 notification	.1.3.6.1.4.1.3902.1015.190.7.1.1.4
zxAnEventSyslogEnable Enable/Disable the syslog config.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.7.1.1.5
zxAnEventSyslogSnmpOperType For snmp, specify the operation type that the receiver expects.	Enumerationr/w Enumerated Values: 1 all 2 get 3 set	.1.3.6.1.4.1.3902.1015.190.7.1.1.6
zxAnEventSyslogRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.7.1.1.30

Event definition table.

zxAnEventDefineEntry row .1.3.6.1.4.1.3902.1015.190.8.2.1

Event definition table entry.

Indexes

zxAnEventDefineCode zxAnEventDefineReportChannelType

Column	Syntax	OID
zxAnEventDefineCode Event or alarm code.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.8.2.1.1
zxAnEventDefineReportChannelType Event report channel type. snmp(1) - event is reported to NMS by SNMP. ponExtendedOam(2) - event is reported to NMS by EPON extend OAM. ponOmci(3) - event is reported to NMS by GPON OMIC.	Enumeration Enumerated Values: 1 snmp 2 ponExtendedOam 3 ponOmci	.1.3.6.1.4.1.3902.1015.190.8.2.1.2
zxAnEventDefineName Event name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.190.8.2.1.3
zxAnEventDefineStandardAlarmCode Standard alarm code is just used by events of EPON extend OAM or GPON OMCI. Value 0 means SNMP trap.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.8.2.1.4
zxAnEventDefineEventType The event type are defined in ITU-T X.733. - equipment event type: An event of this type is principally associated with an equipment fault; - quality of service event type: A…	Bits Enumerated Values: 0 equipmentEvent 1 qualityOfServiceEvent 2 communicationsEvent 3 environmentEvent 4 processingErrorEvent	.1.3.6.1.4.1.3902.1015.190.8.2.1.5
zxAnEventDefineAdminStatus Enables or disables a specified event. If disable(2), event will not be pushed into alarm pool and discarded directly.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.8.2.1.6
zxAnEventDefineMaskEnable Enable or disable the event mask. If enable(1), event will be pushed into alarm pool, but not be reported to NMS. At the same time, a message will be sent to NMS to restore the event that has been reported. …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.8.2.1.7
zxAnEventDefineSendingDelay Event sending delay. Value 0 means event is sent without delay. This object is used to prevent that event and restoring event occur frequently in a short time.	secondsInteger32r/w Constraints: range: 0-1800	.1.3.6.1.4.1.3902.1015.190.8.2.1.8
zxAnEventDefineSendingLimit Limit the number of specified event sending per second. Value 0 means no limit. This object is used to prevent sending too many events to NMS at the same time.	secondsInteger32r/w Constraints: range: 0-50	.1.3.6.1.4.1.3902.1015.190.8.2.1.9
zxAnEventDefineReversalEnable Enable or disable alarm reversal. If enable(1), device will not report the alarm generated by an unused service or managed entity. But if the service or managed entity is not idle,then the alarming process will be no…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1015.190.8.2.1.10

Event control profile table.

zxAnEventRptCtrlProfileEntry row .1.3.6.1.4.1.3902.1015.190.9.2.1.1

Event reporting control profile table entry.

Indexes

zxAnEventRptCtrlPrfName

Column	Syntax	OID
zxAnEventRptCtrlPrfName Event control profile name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.190.9.2.1.1.1
zxAnEventRptCtrlPrfRowStatus The row status of this entry. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to creat…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.9.2.1.1.50

Event control profile rule table.

zxAnEventRptCtrlProfileRuleEntry row .1.3.6.1.4.1.3902.1015.190.9.2.2.1

Event reporting control profile rule table entry.

When a manager wants to create a control profile rule, it must
comply with the multi-variables usage rule that all the mib
variables related to same fuct…

Indexes

zxAnEventRptCtrlPrfName zxAnEventRptCtrlPrfRuleIndex

Column	Syntax	OID
zxAnEventRptCtrlPrfRuleIndex Event control profile rule index.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.190.9.2.2.1.1
zxAnEventRptCtrlEventCode Event code.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.190.9.2.2.1.2
zxAnEventRptCtrlAdminStatus Defined in M.3100 Amendment 3 [M.3100 Amd3], there are five ARC states: nalm, nalmQI. nalm: Alarm reporting is turned off (i.e., not allowed). nalmQI: nalm - Qualified Inhib…	Enumerationr/w Enumerated Values: 1 nalm 2 nalmQI	.1.3.6.1.4.1.3902.1015.190.9.2.2.1.21
zxAnEventRptCtrlPrfRuleRowStatus The row status of this entry. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.9.2.2.1.50

Event control profile table.

zxAnEventRptCtrlResourceEntry row .1.3.6.1.4.1.3902.1015.190.9.2.3.1

Event reporting control profile table entry.

Indexes

zxAnEventRptCtrlResId

Column	Syntax	OID
zxAnEventRptCtrlResId The resource id is of ResourceId type, indicates the resource id of a event.	ResourceId	.1.3.6.1.4.1.3902.1015.190.9.2.3.1.1
zxAnEventRptCtrlResPrfName Event control profile name. When the event control profile is applied to a resource id, the profile name should not be 0 length.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.190.9.2.3.1.2
zxAnEventRptCtrlResRowStatus The row status of this entry. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.190.9.2.3.1.50